Anke wrote:
Ik ben voor het eerst sloffen aan het breien , hoe bevestig je een plastic zakje, is daar ook een filmpje van?
08.01.2021 - 14:21Anette Enghave wrote:
Hej. Jeg kan ikke se hvad flappen skal og hvordan den skal syes til?
29.11.2020 - 20:10DROPS Design answered:
Hej Anette, jo men bare følg opskriften, de 7 cm er dem på siden af foden hvor knappen skal syes i. De nye du slår op er der hvor du lukker af til knaphul efter kun 2 cm. God fornøjelse!
01.12.2020 - 15:46Jen wrote:
I have made the flap and cast on the 16 stitches. Now knit 3 1/2” from original cast on stitches but that is only a few rows and it doesn’t look like the diagram. Should it really be measured from the cast on stitches after the flap?
20.02.2019 - 23:41DROPS Design answered:
Dear Jen, after you have worked the flap (ie cast off the 16 sts on the left side and work over all sts casting on 16 new sts (over flap) you work for 3 1/2" then work the buttonhole at the beg of row from WS (the button sewn on the flap will be buttoned here), so that you have to measure from cast on row = from the very beg of piece., not from the new stitches cast on. Happy knitting!
21.02.2019 - 10:08Grethe Gaare Lonie wrote:
Når der står glatstrikning - menes det ret den ene vej og vrang den anden vej? Har nemlig lige lavet et par hvor det var ret på alle pinder
06.01.2019 - 21:46DROPS Design answered:
Hei Grete. Glattstrikk betyr at alle pinnene er rette fra rettsiden. Når du strikker frem og tilbake strikker du altså rett fra rettsiden og vrang fra vrangsiden. Når du strikker rett på alle pinner får du det som på dansk heter retstrikning (Altså: annenhver pinne er rett og vrang, sett fra rettsiden). God fornøyelse
09.01.2019 - 09:26Jeannie Bang Jensen wrote:
Har fulgt opskriften og læst opskriften utroligt mange gange, men intet sted står der hvad den flap skal bruges til men du skriver det er til knappen hvor den er syet på. Super. Det kunne I godt skrive i opskriften (:
19.09.2018 - 16:00Jeannie Bang Jensen wrote:
Hej(: man skal strikke over de 16 masker i 7 cm men undre mig hvad det stykke skal bruges til. For kan ikke læse nogen steder hvad man skal gøre med den. Kan du forklare mig hvad man skal gøre med det stykke?. (: for synes det ser helt forkert ud/:
19.09.2018 - 13:38DROPS Design answered:
Hej, jo men bare følg opskriften, de 7 cm er dem på siden af foden hvor knappen skal syes i. De nye du slår op er der hvor du lukker af til knaphul efter kun 2 cm. God fornøjelse!
19.09.2018 - 15:49Susanne Behrens wrote:
Guten Abend, Ich habe jetzt die linken 16 Maschen hoch gestrickt und abgekettet. Jetzt stricke ich die 8cm hoch, doch was passiert mit diesem 16 Maschen/7cm bleibt dies bis zum Schluss so locker hängen und wird vor dem Filzen irgendwie befestigt? Habe ich was falsch gemacht? Gruß Susanne
27.11.2017 - 18:03DROPS Design answered:
Liebe Frau Behrens, wenn Sie 7 cm über die 16 M gestrickt haben, dann werden diese 16 M abgekettet. Die stillgelegten Maschen jetzt stricken und 16 M auf der linken Seite anschlagen und weiter stricken. Der Knopf wird ganz am Ende auf dieses kleine Bändchen (7 cm über 16 M) genäht. Viel Spaß beim stricken!
28.11.2017 - 08:56Linda wrote:
Hallo, ich würde mich gerne an diesen Schuhen probieren, verstehe das mit den 2 Fäden aber noch nicht. Wird der komplette Schuh immer mit 2 parallel gefürten Fäden genäht? Hat man theoretisch also immer doppelt so viele Maschen auf der Nadel wie die angegebene Zahl?
15.01.2017 - 12:12DROPS Design answered:
Liebe Linda, dieses Modell wird mit 2 Fäden Alpaca gestrickt d.h. mit Doppelfaden. Ihre Maschenprobe muss stimmen (16 M x 20 R glatt gestrickt = 10 x 10 cm vor dem Filzen), dann die Anleitung der Größe folgen um die Hausshuhen in der richtigen Größe zu bekommen. Viel Spaß beim stricken!
16.01.2017 - 09:48Genestier, Paulina wrote:
Bonjour, Je viens de finir les chaussons Drops 112-43, tricotés avec la laine alpaca selon les indications mais je n'arrive pas à les faire feutrer. Est-ce possible de le faire à la main? Merci
20.06.2015 - 22:20DROPS Design answered:
Bonjour Mme Genestier, vous trouverez ici quelques généralités sur le feutrage. Pour toute assistance individuelle, votre magasin DROPS pourra vous conseiller. Bon tricot!
22.06.2015 - 10:29
Frau Holle |
|||||||||||||
|
|||||||||||||
Felted DROPS slippers in 2 threads ”Alpaca”
DROPS 112-43 |
|||||||||||||
SLIPPERS: Worked in 1 piece with seams mid back and mid upper foot. Beg to knit at the mid back – see measuring chart below. LOOSELY cast on 76-80-86 sts on needle size 5.5 mm / US 9 with 2 threads Alpaca and work stockinette st back and forth on needle. REMEMBER THE KNITTING GAUGE! When piece measures 6-7-7 cm / 2 3/8”-2¾”-2¾” continue to work on 16 sts only on the left of piece (seen from RS) – slip the remaining 60-64-70 sts on a stitch holder. Now work 7 cm / 2¾’’ stockinette st on the 16 sts and then bind off. This piece will be were you sew the buttons afterward. Slip the sts from stitch holder back on needle and cast on 16 new sts on the left side of piece (seen from RS). Now continue on all sts. When piece measures 8-9-9 cm / 3 1/8”-3½”-3½” (from cast on row at the very beginning) work next row as follows from WS: work 4 sts, bind off 9 sts, work remaining sts on row. Cast on 9 new sts over the bind off sts on return row (= buttonhole). When piece measures 18-19.5-21.5 cm / 7”-7¾”-8½” bind off 4-4-5 sts each side, bind off in beg of following 2 rows = 68-72-76 sts. Now bind off at the beg of every row each side: 4 sts 2 times, and then at the beg of every other row each side: 1 st 8-9-10 times = 36-38-40 sts. Continue until piece measures 34-38-42 cm / 13 3/8”-15”-16½”, bind off loosely. Make 1 more slipper, but mirror it, i.e. when piece measures 6-7-7 cm / 2 3/8”-2¾”-2¾” only work the first 16 sts on the right side of piece (seen from RS). ASSEMBLY: Fold slipper and sew tog mid back in outer loops of sts. Sew tog mid upper foot at the front in the same way. Felt slippers in washing machine – SEE BELOW. For the perfect fit, put slipper on while still wet to shape it into the right size. After felting sew on buttons to fit buttonholes. FELTING: To avoid the slippers felting tog during wash, attach a small plastic bag inside the top before putting them in the washing machine. Wash at 40C/104F with a detergent free of enzymes and optical bleach, with normal spin, but no pre-wash. After wash shape the slippers while still wet, and leave to dry – see above. If after felting the slippers are too big, wash them again, if they are too small, leave them to soak and then shape them into the right size. At subsequent washes wash the slippers at a wool programme. AFTER FELTING: If the piece is not felted enough and is too big: Wash the piece one more time in the washing machine while it is still wet add a terry towel that measures approx. 50 x 70 cm = 19 3/4" x 27 1/2" - NOTE: Do not use a short program. If the piece has been felted too much and is too small: While the piece is still wet stretch it to the correct measurements, if the piece is dry, make sure to soak it first. Remember: All subsequent washes are as a normal wool garment. |
|||||||||||||
Diagram explanations |
|||||||||||||
|
|||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Anke wrote:
Pas na 8 cm de knoopsgat? De flap is 6 cm, komt dit dan wel goed?
08.01.2021 - 14:51