Change language:

Magic by DROPS Design
"Delightful colors make this crochet project really special!"
Crochet DROPS moebius neck warmer and hat with squares in ”Delight”.
DROPS 143-40
DROPS design: Pattern no de-092
Yarn group A
--------------------------------------------------------
NECK WARMER:
Size: One-size
Circumference: approx. 150 cm / 59''
Length: approx. 36 cm / 14 1/4''

Materials: DROPS DELIGHT from Garnstudio
300 g color no 10, olive/rust/plum

DROPS CROCHET HOOK size 3.5 mm/E/4 - or size needed to get 20 dc = 10 cm / 4'' in width (1 square measures approx. 6 x 6 cm / 2 3/8'' x 2 3/8").
------------------------------------------------------

HAT:
Size: S/M - L/XL
To fit head circumference: approx. 54/56 - 58/60 cm / 21 1/4"/22" - 22 3/4"/23½"
Circumference: 48-54 cm / 19"-21 1/4"
Height: 24-25 cm / 9½"-9 3/4"

Materials: DROPS DELIGHT from Garnstudio
100 g color no 10, olive/rust/plum for both sizes

DROPS CROCHET HOOK size 3.5 mm/E/4 - or size needed to get 20 dc = 10 cm / 4'' in width (1 square measures approx. 6 x 6 cm / 2 3/8'' x 2 3/8'').

(Continue to pattern...)

See deals and shadecard for: DROPS Delight

Comments (168)

Print Pattern Print Photo

The following yarns can be used as alternatives for DROPS Delight. All prices valid per 26/10/2014.

DROPS Tutorial Videos: Chain stitch (ch)

DROPS Tutorial Videos: dc (US) / tr (UK)

DROPS Tutorial Videos: Granny square

DROPS Tutorial Videos: Granny stripes

DROPS Tutorial Videos: Single crochet, sc (US) / Double crochet , dc (UK)

DROPS Tutorial Videos: Slip stitch (sl st)

DROPS Tutorial Videos: Stripes crochet

If you do not find the video you need, click here to go to DROPS Video Index.

Yarn type
NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from cm to inch - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
NECK WARMER:

ROUNDS WITH DC:
Beg every round with dc with 3 ch (= 1st dc), finish round with 1 sl st in 3rd ch from beg of round.

COLOR CHANGE:
To get a nice color change work last sl st on round with the new thread. Continue on to next round with the new thread.
--------------------------------------------------------

SQUARE:
Ch 6 with Delight on hook size 3.5 mmE/4 and form a ring with 1 sl st in 1st ch. Read ROUNDS WITH DC.
ROUND 1: * Work 3 dc in ch-ring, 3 ch *, repeat from *-* a total of 4 times = 12 dc and 4 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball (= new color each round) - READ COLOR CHANGE.
ROUND 2: In every ch-space work as follows: 3 dc, 3 ch and 3 dc, 1 ch = 24 dc and 8 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball.
ROUND 3: * In next ch-space work as follows: 3 dc, 3 ch and 3 dc (= corner), ch 1, in next ch-space work 3 dc, 1 ch *, repeat from *-* the entire round = 36 dc and 12 ch-spaces. Cut and fasten the thread.
Work a total of 25 squares. Work squares tog into 1 strip as follows: Place 2 and 2 squares on top of each other, insert hook through ch-space in the corner on both squares, work 1 ch and 1 sc, * ch 3, 1 sc in next ch-space on both squares *, repeat from *-*, cut and fasten the thread. Work the ends of the strip tog the same way to form a ring – NOTE: twist the strip 1 time to form a twisted ring, before working the ends tog.

NECK WARMER:
Worked from middle of piece = the twisted ring and out towards the outer edges - i.e. work upwards and downwards at the same time. NOTE! Beg every round with 3 ch (= 1st dc).
Work 1st round along the strip as follows: In each of the 4 ch-spaces on every square work 3 dc and ch 1, finish round with 1 sl st in 3rd ch from beg of round (= 1st dc), sl st until next ch-space. Continue to work as follows: In every ch-space work 3 dc, ch 1, finish round with 1 sl st in 3rd ch from beg of round (= 1st dc), sl st until next ch-space. Continue like this until neck warmer measures approx. 36 cm / 14 1/4'' vertically (the entire piece, not just from the middle and outwards). Cut and fasten the thread.

--------------------------------------------------------

HAT:

ROUNDS WITH DC:
Beg every round with dc with 3 ch (= 1st dc), finish round with 1 sl st in 3rd ch from beg of round.

DECREASE TIP 1:
Dec 1 dc by working the next 2 dc tog as follows: Work 1 dc but wait with last pull through (= 2 sts on hook), work next dc but on last pull through, pull thread through all 3 sts on hook.

ROUNDS WITH SC:
Beg every round with sc with 1 ch (not counted as 1st sc) - NOTE! Work sc in back loop of every sc, finish with 1 sl st in 1st sc.

DECREASE TIP 2:
Dec 1 sc by working 2 sc tog as follows: * Insert hook in back loop of next sc, get thread *, repeat from *-* one more time, make 1 YO and pull thread through all 3 sts on hook.

COLOR CHANGE:
To get a nice color change work last sl st on round with the new thread. Continue on to next round with the new thread.
--------------------------------------------------------

SQUARE:
Ch 6 with Delight on hook size 3.5 mm/E/4 and form a ring with 1 sl st in 1st ch. Read ROUNDS WITH DC.
ROUND 1: * Work 3 dc in ch-ring, 3 ch *, repeat from *-* a total of 4 times = 12 dc and 4 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball (= new color each round) - READ COLOR CHANGE.
ROUND 2: In every ch-space work as follows: 3 dc, 3 ch and 3 dc, 1 ch = 24 dc and 8 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball.
ROUND 3: * In next ch-space work as follows: 3 dc, 3 ch and 3 dc (= corner), ch 1, in next ch-space work 3 dc, 1 ch *, repeat from *-* the entire round = 36 dc and 12 ch-spaces. Cut and fasten the thread.
Work a total of 8-9 squares. Work squares tog into 1 strip as follows: Place 2 and 2 squares on top of each other, insert hook through ch-space in the corner on both squares, work 1 ch and 1 sc, * ch 3, 1 sc in next ch-space on both squares *, repeat from *-*, cut and fasten the thread. Work the ends of the strip tog the same way to form a ring.

HAT:
Worked in the round. Work along one side of strip as follows: In each of the 4 ch-spaces on every square work 3 dc, finish with 1 sl st in 3rd ch (= 1st dc) from beg of round = 96-108 dc. Then work ROUNDS WITH DC - read explanation above - as follows: 3 ch (= 1st dc), skip 1st dc from previous round, 1 dc in every dc, finish round with 1 sl st in 3rd ch from beg of round. Continue until hat measures approx. 16 cm / 6 1/4'' from bottom edge. Then dec as follows:
ROUND 1: * 1 dc in each of the next 6-7 dc, dec 1 dc - READ DECREASE TIP 1 *, repeat from *-* the entire round = 84-96 dc (= 12 sts dec).
ROUND 2: * 1 dc in each of the next 5-6 dc, dec 1 dc *, repeat from *-* the entire round = 72-84 dc.
ROUND 3: * 1 dc in each of the next 4-5 dc, dec 1 dc *, repeat from *-* the entire round = 60-72 dc.
ROUND 4: * 1 dc in each of the next 3-4 dc, dec 1 dc *, repeat from *-* the entire round = 48-60 dc.
ROUND 5: * 1 dc in each of the next 2-3 dc, dec 1 dc *, repeat from *-* the entire round = 36-48 dc.
ROUND 6: * 1 dc in each of the next 1-2 dc, dec 1 dc *, repeat from *-* the entire round = 24-36 dc.
SIZE S/M: Work all dc on round tog 2 by 2 = 12 dc, cut the thread and sew the last dc tog with thread end.
SIZE L/XL:
ROUND 7: * 1 dc in next dc, dec 1 dc *, repeat from *-* the entire round = 24 dc.
ROUND 8: Work all dc on round tog 2 by 2 = 12 dc, cut the thread and sew the last dc tog with thread end.

EDGE:
Work an edge along bottom edge of hat (along the other side of strip with squares) as follows: Work ch 1, in each of the 4 ch-spaces on every square work 4 sc = 128-144 sc, finish with 1 sl st in 1st sc from beg of round. Then work ROUNDS WITH SC - read explanation above. When edge measures approx. 1 cm / ½", dec 16-20 sc evenly on round - READ DECREASE TIP 2 = 112-124 sc. Continue until edge measures approx. 2 cm / 3/4'', cut and fasten the thread. The hat measures approx. 24-25 cm / 9½"-9 3/4'' vertically.


----------------------------------------------------------
Wrist warmers – see design: 143-41
----------------------------------------------------------



Do you need some help?

For further pattern help, please contact the store where you bought the yarn. Having bought DROPS yarn, you are guaranteed to receive qualified help from a store specializing in the DROPS patterns. You can also take a look at our tutorial videos.

All patterns are carefully reviewed, but we must make reservation for possible mistakes. All patterns are translated from Norwegian and you can always check the original pattern for measurements and calculations. Go to original pattern for design DROPS 143-40. If you think you have found an error in the pattern, please post your remark or question in our Comments section.

© 1982-2014 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. This is for all of you with knitting as a hobby and for you who run a yarn store. Either way, the DROPS pattern database is at your free disposal. As a store you are welcome to use the DROPS pattern database to promote the sale of your assortment. Print out any pattern you may want, make as many copies as desired. The only thing we ask is that you don't make any changes / additions to the original printed document... and that the patterns according to the DROPS philosophy are given out to the consumers for free.
The sale of garments based on DROPS DESIGN is permitted as long as they are sold as single items or per order. Further commercial use of the patterns is not permitted. It has to be clearly stated that the garment is made based on a design from DROPS DESIGN. The use of DROPS photos for marketing purposes/sales is only permitted when only DROPS yarns have been used. The photo may not be cut or edited and the logo should be clearly visible. The use of clothes labels of which DROPS DESIGN forms part is conditioned by the inclusion of the following text: “A DROPS DESIGN made by …..”.
We reserve the right to withdraw the permission for use at any time, notwithstanding the reason.

DROPS Design