Gaetane wrote:
Bonjour une autre question , quand vous dites diminuez à tous les 2 tours , ça veut tu dire je tricote un rang end ,un rang env , et après je fait diminution sur end , et je retricote encore un rang end,un rang env sans diminution etc... ? Ou autrement ? Merci 🙏
12.06.2023 kl. 15:33:DROPS Design answered:
Bonjour Gaetane, quand on doit diminuer tous les 2 tours, on tricote ainsi: *1 tour avec diminutions, 1 tour sans diminutions*, et on répète de *-*. Bon tricot!
12.06.2023 kl. 15:55:
Gaetane wrote:
Bonjour je vient de tout relire et si je comprends bien je tricote mon 4 cm pour le début de jambe après je fait la bordure de la jambe et après je tricote le pied c est ça ? Merci 🙏
12.06.2023 kl. 02:50:DROPS Design answered:
Bonjour Gaetane, vous tricotez d'abord la jambe en rond pendant 4 cm, puis tricotez les 10 mailles centrales en laissant les autres mailles en attente. Cette vidéo devrait pouvoir vous aider à visualiser ce qu'il faut faire. Bon tricot!
12.06.2023 kl. 09:09:
Gaetane wrote:
Bonjour, lorsque rendu à tricoter le pied après mes 4 cm. De jambe, combien de cm en aller retour au point mousse dois je tricoter, avant de garder les 10 1ères mailles ? Merci 🙏
11.06.2023 kl. 20:58:DROPS Design answered:
Bonjour Gaetane, la division se fait tout de suite, vous pouvez couper le fil et tricoter les 10 mailles centrales pendant 7-8½-10 cm (n'oubliez pas de monter 1 m à la fin des 2 premiers rangs). Bon tricot!
12.06.2023 kl. 09:05:
Gaetane wrote:
Bonjour , j ai finalement compris ma 1ère question grâce à vos vidéos ! Merci 🙏 Mais je comprends pas , j ai 71 mailles ,alors comment puis-je avoir 35 m. De chaque côté entre mes 2 marqueurs ? Et puis comment puis-je repartir mes mailles sur combien d aiguilles? Voilà merci 🙏
06.12.2022 kl. 02:39:DROPS Design answered:
Bonjour Gaetane, le 1er marqueur est situé entre 2 mailles (au milieu des 10 mailles du devant), le 2ème marqueur est placé dans la maille du milieu dos, ainsi vous avez: 1 m avec le marqueur(milieu dos), 35 m, 2ème marqueur, 35 m = 71 m. Bon tricot!
06.12.2022 kl. 11:11:
Gaetane wrote:
H– EN MÊME TEMPS, à la fin des 2 rangs suivants monter 1 m lis (tricoter les m lis au POINT MOUSSE - voir ci-dessus) = 12 m. Quand la partie centrale mesure 7-8½-10 cm, diminuer 1 m lis de chaque côté = 10 m. Je saisi pas ça ! Comment fait on pour monter 1 maille lis ? Et est ce de chaque côté? Merci 🙏
06.12.2022 kl. 00:09:DROPS Design answered:
Bonjour Gaetane, cette vidéo montre comment tricoter ces chaussons en commençant par cette partie, cela devrait pouvoir vous être utile (les mailles envers sont ici tricotées de cette façon). Bon tricot!
06.12.2022 kl. 11:09:
Gaetane wrote:
Peut on faire ce modèle avec des aiguilles circulaires? Svp 🙏 merci pour votre réponse 😉
29.10.2022 kl. 22:10:DROPS Design answered:
Bonjour Gaetane, vous pouvez tricoter la partie "jambe" en rond sur aiguille circulaire, mais il vous faudra utiliser la technique du magic loop- le pied et la bordure autour de la jambe se tricotent en allers et retours (donc tout à fait réalisable sur circulaire). Bon tricot!
31.10.2022 kl. 09:48:
Avana wrote:
Avanafil 200 buy avanafil canada
07.03.2021 kl. 16:56:
Combigan wrote:
Brimonidine tartrate ophthalmic brimonidine side effects
07.03.2021 kl. 15:12:
Cyclosporine wrote:
Cyclomune eye drop cyclosporine 100 mg
06.03.2021 kl. 03:05:
Priligy wrote:
Priligy uk priligy online
05.03.2021 kl. 19:01:
Avana wrote:
Buy avanafil usa avana 200 mg
04.03.2021 kl. 02:48:
Soledad wrote:
Hice el zapato, pero no sé como hacer la caña, ni sé como hace los pliegues, no sé a que se refieren, han debido poner un vídeo de como hacer la caña
08.12.2020 kl. 12:56:
Karen wrote:
I’m confused with the pattern in the foot section. It says you should have 65 stitches on the needle having done the front. It then says there should be 32 stitches either side of the two markers (one for the toe and one for the heel). This does not add up to 65. In all sizes there is one stitch out. What am I missing?
12.11.2020 kl. 13:22:DROPS Design answered:
Dear Karen, your 65 sts should look like this with markers: 1 marker in the middle of the 27 sts slipped earlier on a thread and slipped back on needle (= mid back) + 13 sts on each side of this marker + 14 sts on each side of upper foot + 10 sts on top of foot (with 1 marker on either side), ie: 13+14 = 27 sts for one side / 10 sts for mid front / 27 sts for the other side / 1 st with marker on mid back = 65 sts. Hope this helps. Happy knitting!
12.11.2020 kl. 14:31:
Normand Champagne wrote:
Besoin explication poi t fantaisie 1. Rang 1 veux dire 5 endroit et 2 envers le 2 id e veut il cite 3 envers et deux endroit et on répète les 2 rangs
30.09.2019 kl. 20:26:DROPS Design answered:
Bonjour Mr Champagne, au rang 1 de A.1 (= sur l'endroit) on tricote: 5 m end, (2 m env, 2 m end)x5, 3 m end. Au rang 2 de A.1 (= sur l'envers), on tricote: 3 m end, (2 m env, 2 m end) x 5, 2 m env, 3 m end. Bon tricot!
01.10.2019 kl. 10:11:
Pauline wrote:
Hi , I watch the video of pattern 2 but the yarn over stitch is not clear for me?
15.04.2019 kl. 02:45:DROPS Design answered:
Hi Pauline, The yarn over is just winding the yarn around the right needle before working the next stitch. Happy knitting!
16.04.2019 kl. 07:45:
Marjolein wrote:
Hoii, in het patroon staat dat breinaald 6 gebruikt moet worden, maar in de lijst van de garencatagoriën staat dat deze wol voor naald 9 is, is dit een typfout in het patroon?
17.02.2019 kl. 17:31:DROPS Design answered:
Dag Marjolein,
Er wordt in dit patroon inderdaad een andere naalddikte gebruikt dan staat aangegeven in de garenlijst. De stekenverhouding is ook anders. Dit is geen typefout, maar is bewust gedaan, zodat het breiwerk wat dichter wordt.
17.02.2019 kl. 18:43:
Nicky Langevin wrote:
Bonjour j'aimerais avoir de l'informetion je ne comprends pas le point fantaisie je ne sais pas lire le diagramme au tricot pourriez-vous m'aidez.Merci
30.01.2019 kl. 00:00:DROPS Design answered:
Bonjour Mme Langevin, lisez le diagramme de bas en haut et de droit à gauche sur l'endroit, de gauche à droite sur l'envers, ainsi au 1er rang de A.1 = sur l'endroit, vous tricotez: 5 m end, 2 m env, 2 m end, 2 m env, 2 m end, 2 m env, 2 m end, 2 m env, 2 m end, 2 m env, 5 m end. Sur l'envers, tricotez: 3 m end, 2 m env, 2 m end, 2 m env, 2 m end, 2 m env, 2 m end, 2 m env, 2 m end, 2 m env, 2 m end, 2 m env, 3 m end. Bon tricot!
30.01.2019 kl. 07:43:Gwen Maddox wrote:
I am not sure where it says "work according to A1 until piece measures 38cm." Is the 38cm measured from cast on edge (i.e. beginning of garter stitch) or is it measured from the beginning of the piece where the A1 pattern starts ?
25.06.2016 kl. 04:49:DROPS Design answered:
Dear Mrs Maddox, measure the 38 cm from the cast on edge. Happy knitting!
27.06.2016 kl. 08:40:Deborah wrote:
What are double pointed needles and also what ply wool are you using please?
16.04.2016 kl. 15:56:DROPS Design answered:
Dear Deborah, double pointed needles are straight needles with two points, perfect for working small circunferences in round, such as socks or sleeves. They're usually sold in group of four or five, and you cand find them of different lenghts. This pattern is worked in Andes, which is a super bulky yarn. Happy knitting!
17.04.2016 kl. 14:54:Deborah wrote:
What are double pointed needles and also what ply wool are you using please?
16.04.2016 kl. 15:56:DROPS Design answered:
Dear Deborah, double pointed needles are straight needles with two points, perfect for working small circunferences in round, such as socks or sleeves. They're usually sold in group of four or five, and you cand find them of different lenghts. This pattern is worked in Andes, which is a super bulky yarn. Happy knitting!
17.04.2016 kl. 14:54:Agnes wrote:
Live in nz where do I get the work really need to make these slippers
05.04.2016 kl. 04:24:DROPS Design answered:
Dear Agnes, please click here to get the list of DROPS store shipping worldwide. Happy knitting!
05.04.2016 kl. 09:34:
TALLARON Christine wrote:
Bonjour, le modèle 15 veste avec torsades et capuche en lima drops de garnstudio paru sur le magazine spécial tricot les idées de marianne décembre 2015, devant droit qui dit de monter 35 mailles et tricoter 15 mailles jersey, 14 mailles en torsade et 6 mailles jersey, car la torsade se tricote sur un multiple de 24 mailles, dois je déja tricoter plusieurs rangs en jersey endroit et déjà faire les augmentations de 10 maille coté boutonnière avant de commencer la torsade ?
25.02.2016 kl. 16:30:DROPS Design answered:
Bonjour Mme Tallaron, le modèle en question est un modèle conçu par l'éditeur, merci de bien vouloir les contacter pour toute information complémentaire ou assistance à la réalisation de ce modèle. Bon tricot!
29.02.2016 kl. 13:39:
Diane wrote:
Do you offer the pattern for the othercuff shown in picture. I am most interested in cable cuff
14.12.2015 kl. 05:07:DROPS Design answered:
Dear Diane, the upper part of the slipper is explained under "Loose leg worked across". Happy knitting!
14.12.2015 kl. 10:17:
Amy wrote:
To whom it may concern: I am wanting to do the knitted slipper patterns and was inquiring about what yarn that I can use since I don't live anywhere close to a place that I can buy the yarn ( I live in Ontario and the closest place for me to get the yarn would be British Columbia and it would cost more than what the yarn is worth to ship it)if you could let me know it would be appreciated. Thank you for your help
20.11.2015 kl. 22:51:DROPS Design answered:
Dear Amy, we are happy to inform you that our yarn are avalaible in Canada, please click here to get the list of stores or where to buy them online. Happy knitting!
23.11.2015 kl. 09:37:
Stacy wrote:
When knitting the second slipper, it says to "make sure the leg opening is in the opposite side," and I'm not sure how to do that. Is it just on assembly that the buttons go on the opposite side or is there something else I'm missing?
18.11.2015 kl. 15:18:DROPS Design answered:
Dear Stacy, when sewing the leg, make sure the seam/buttons are on the opposite side (facing outwards when worn). Happy knitting!
18.11.2015 kl. 17:37:
Stacy Davenport wrote:
What size buttons are used for this pattern? I don't see a way to buy them online through your store.
17.11.2015 kl. 19:14:DROPS Design answered:
Dear Mrs Davenport, the buttons ref #536 are 25 mm - see here - you should find them online by our DROPS Superstore. Happy knitting!
18.11.2015 kl. 08:59:
Amy wrote:
To whom it may concern: I was just wondering if I can use the shetland chunky yarn since I am no where near a store to get the yarn that is required for the pattern, I was also wondering what the gauge and number of stitches are suppose to be for this pattern if you could let me know it would be appreciated. Amy
03.11.2015 kl. 23:38:DROPS Design answered:
Dear Amy, we are happy to inform you there are some DROPS stores in Canada where you can get your yarn online - see list here. Happy knitting!
04.11.2015 kl. 09:21:
Monica wrote:
On this slipper pattern and all knitted patterns on your site, how do you read the diagrams, from right to left or left to right? I've never used a diagram and I am a risky novice :) Thank you!!!
02.11.2015 kl. 05:16:DROPS Design answered:
Dear Monica, you will find here more informations about diagrams. Happy knitting!
02.11.2015 kl. 09:52:
Amy wrote:
To whom it may concern: I was wondering if there is a specific yarn that I am to be using to make the slipper boots or can I use what yarn I have available. The yarn that I am currently using is the Bernat Super Saver yarn, Thank you again for all your help Amy
31.10.2015 kl. 22:48:DROPS Design answered:
Dear Amy, these slippers are worked in DROPS Andes - see also - find a DROPS store there. Happy knitting!
02.11.2015 kl. 07:57:
Amy wrote:
To whom it may concern: I was wondering when I am knitting the 12 stitches do I knit both ends of the row in garter stitch or just the last stitch of the row. Thank you in advance for your help Amy
31.10.2015 kl. 16:27:DROPS Design answered:
Dear Amy, when you are working the 12 sts for mid upper part, work the 1st and last st in garter st. See also the video in previous answer. Happy knitting!
31.10.2015 kl. 18:20:
Amy wrote:
To whom it may concern: The problem I am having is I have the 10 stitches on my needle for the top portion of the slipper but when I reach the 7 cm am I suppose to increase on those 10 stitches to reach the number 61 stitches that I need or do I start increasing after after the 7 cm. It says to pick up 12 stitches after I reach the 7 cm on either side of the edge stitch. That is where I am having the problem. Thank you again for your help
29.10.2015 kl. 04:56:DROPS Design answered:
Dear Amy, after you have worked the 7 cm over the mid sts, and 10 sts left, pick up 12 sts along both side of the upper foot (along right side of the middle part + along left side of the middle part) + slip sts from thread back on needle = you have a total of 61 sts on needle and your work looks like as in video, time code 5:18 approx. Happy knitting!
29.10.2015 kl. 09:32:
Amy wrote:
To whom it may concern: I am still confused as to how many rows I need because there is no explanation for when I go to start the pattern 2 portion of the slipper part and how many increases I need to reach the required amount of sts as well. I tried to watch the video but it was hard to follow when the sped up the knitting part. Thank you again for your help Amy
28.10.2015 kl. 16:04:DROPS Design answered:
Dear Amy, wijth pattern 2 portion of the slipper part, do you mean the edge around leg? Work first 4 ridges in garter st (= 8 K rows) but on the 8th K row increase 6 sts evenly - see here how to increase evenly. Then work following A.1 until 35-38 cm, work 4 ridges (8 K rows), but on the 1st of these 8 rows, decrease 6 sts evenly. Happy knitting!
28.10.2015 kl. 18:26:
Amy wrote:
Amy 25.10.2015 kl. 00:38: To whom it may concern: I am currently working on the slipper boot pattern and am wondering how I am suppose to do the heel of the slipper when it doesn't say how many rows to do it just say to work back and forth on the needles. If you could let me know it would be appreciated Thank you in advance for your help
25.10.2015 kl. 15:33:
Amy wrote:
To whom it may concern: I am currently working on the slipper boot pattern and am wondering how I am suppose to do the heel of the slipper when it doesn't say how many rows to do it just say to work back and forth on the needles. If you could let me know it would be appreciated Thank you in advance for your help
25.10.2015 kl. 00:38:
Yvonne wrote:
Kan ik de slof ook op 2 pennen breien ?
10.06.2015 kl. 23:26:DROPS Design answered:
Hoi Yvonne. Nee, enkele delen van deze slof worden in de rondte gebreid.
11.06.2015 kl. 13:44:
Trudy wrote:
I guess I did not make myself clear. I understand about putting the stitches back on the needles, although I am not sure if we are using three now or four. If we are using four - then I need to know how many stitches are put onto the fourth needle which would be the heal area of the boot.
12.04.2015 kl. 17:54:DROPS Design answered:
Dear Trudy, distribute the sts on 4 needle or as in the video, making sure the markers are on the correct places. Happy knitting!
13.04.2015 kl. 09:32:
Elaine Langille wrote:
I don't understand "knit over knit" and "purl over purl" I watched the video, but still didn't know how to do it
11.02.2015 kl. 03:56:DROPS Design answered:
Dear Mrs Langille, you work pattern 2 over the 12 sts as follows from RS: 1 edge st in garter st, *K2,P2* over the next 10 sts and finish with 1 edge st in garter st. On next row from WS work 1 edge st in garter st, *P2/K2* over the next 2 sts, 1 edge st in garter st. Happy knitting!
11.02.2015 kl. 09:14:
M Damen wrote:
Een opmerking niet over de sloffen maar over de gebruikte taal. gecontroleerd is met 1 L niet met 2. Deze fout staat al enkele jaren bij ieder patroon.
04.01.2015 kl. 20:21:Dianne Perrin wrote:
Drops 158-47 pattern no an-025 I do not understand the directions for A.1 which is the first row and which x box is a p from rs and which x box is k from ws and which blank box is k from rs and which blank box is p from ws
16.12.2014 kl. 07:15:DROPS Design answered:
Dear Mrs Perrin, please click here to read more about diagrams. Row 1 = K5, (P2, K2) repeat (to) a total of 5 times, K3. Row2= K3, (P2, K2) repeat (to) a total of 5 times, P2, K3. Happy knitting!
16.12.2014 kl. 09:58:
France Roy wrote:
Serait-il possible de savoir combien il devrait rester de mailles après avoir fait les diminutions au talon et au bout de pied avant de fermer les mailles?
02.12.2014 kl. 18:21:DROPS Design answered:
Bonjour Mme Roy, vous avez 61-65-71 m au départ, et diminuez 4 m par tour de diminution (tous les 2 tours) pendant 5-5-6 cm - le nombre de mailles restant dépendra de votre nombre de rangs pour atteindre cette hauteur. Bon tricot!
03.12.2014 kl. 10:00:
Tracy wrote:
There should be a video showing how to knit these from begging to end...
18.11.2014 kl. 05:13:
Jeanne Pawluk wrote:
The pattern states that there are 32 stitches between markers on each side...this adds to 64 stitches and not 65 stitches as listed. Once I adjusted the amount of stitches, it worked out very well.
18.11.2014 kl. 03:01:DROPS Design answered:
Dear Mrs Pawluk, for 2nd size, you have 1 marker in the middle of the 10 sts on mid part (towards toe), and the other marker in the stitch at mid back (towards heel), so that you have from mid back : 1 st with marker, 32 sts, marker, 32 sts = 65 sts. Happy knitting!
18.11.2014 kl. 09:34:
Sandra Drouin wrote:
LOVE THIS PATTERN - THANKS!
02.11.2014 kl. 01:25:CARMEN URIZAR wrote:
Quisiera que me explicaran que significa: guardan los primeros 10 pts en la ag, desl los 27-27-29 pts, todo esto se suma, o como hago, necesito ayuda, gracias.
31.10.2014 kl. 07:14:DROPS Design answered:
Hola Carmen. Todos los patrones vienen para varias tallas y los números vienen separados por guiones porque cada número corresponde a una talla desde la más pequeña a la más grande. En este caso, desl 27 pts para la talla 35/37 - 27 para la talla 38/39 y 29 para la talla 40/42 y sigues con el patrón.
31.10.2014 kl. 20:28:
Cathy Smith wrote:
I have this pattern and the yarn suggested. I am wondering if I knit with one or two strands of yarn?
21.10.2014 kl. 04:02:DROPS Design answered:
Dear Mrs Smith, the slippers are worked with 1 strand of yarn and a tension 13 sts x 17 rows in stocking st = 10 x 10 cm with needle size 6 mm or size needed to get that tension. Happy knitting!
21.10.2014 kl. 10:04:
Cindy wrote:
How do you work 4 ridges at the same time on the drops slippers when you only have 2 hands? Directions make no sense
19.10.2014 kl. 06:50:DROPS Design answered:
Dear Cindy, at the beg of loose leg you will inc 6 sts evenly on the last row of the 4 ridges (ie on the 8th K row), and at the end of loose leg, you will dec 6 sts evenly on the first K row when you start the 4 ridges. Happy knitting!
20.10.2014 kl. 10:10:Julia Desch wrote:
This looks a lovely pattern and I will make it in my own wensleydale - the question is where do we find a non-slip sole to put on the bottom or stranding glue to ensure they dont slip - this is really important especially going up and down stairs......many thanks
13.10.2014 kl. 10:29:DROPS Design answered:
Dear Mrs Desch, we kindly recommand you to contact the store where you bought your yarn, they may help you and give you advices & tips. Happy knitting!
13.10.2014 kl. 13:29:
Kat wrote:
Hey! I'm really having troubles with this part here: "Then slip the sts from stitch holder back on needle and pick up 12-14-16 sts on each side of middle part (inside 1 edge st) = 61-65-71 sts on needle." What needle am I slipping the stitches onto? The same one as the one with ten stitches? Am I lnitting in the round here!? I also don't quite understand "the middle part".. Please help!
10.10.2014 kl. 04:43:DROPS Design answered:
Dear Kat, the "middle part" is the upper foot part you worked back & forth for 7-10 cm, pick up now 12-14-16 sts along left side of the upper foot, knit the sts from st holder back and pick up 12-14-16 sts along left side of upper foot, join in the round (sts will be picked up with dpn and distribute around) and continue in garter st. Happy knitting!
10.10.2014 kl. 09:03:
Kat wrote:
Hey! I'm really having troubles with this part here: "Then slip the sts from stitch holder back on needle and pick up 12-14-16 sts on each side of middle part (inside 1 edge st) = 61-65-71 sts on needle." What needle am I slipping the stitches onto? The same one as the one with ten stitches? Am I lnitting in the round here!? I also don't quite understand "the middle part".. Please help!
09.10.2014 kl. 07:27:DROPS Design answered:
Dear Kat, after you have worked the upper foot, you will pick up sts sts along each side of the upper foot and slip sts back from st holder, ie first pick up on the left side of instep (middle part worked back and forth), knit sts from st holder and pick up on the right side of instep (middle part worked back and forth), then continue in the round. Happy knitting!
09.10.2014 kl. 10:09:
Jean Brickey wrote:
First I agree with Ann Marie Marshall, I wish the pattern was written simpler. I am not sure if you are doing the foot in the round or in pieces. If in the round then why can't you use circular needles? Second it says to work 4 ridges. What is a ridge? and what is A.1? Not sure where you are going with this.
08.10.2014 kl. 19:46:DROPS Design answered:
Dear Mrs Brickey, start with the cuff (around ankle), then work the instep back & forth over the first 10 sts (+ 2 sts inc), then pick up sts each side of instep + knit back sts from st holder and work foot in the round, dec then for heel and toe (seam is under foot). Finish then with the loose edge to sew around the slipper. 1 ridge = K2 rows or K1 round, P1 round. A.1= diagram for the pattern. You may use circular needle for foot but maybe then with magic loop technic. Happy knitting!
09.10.2014 kl. 09:54:
Maggie Marshall wrote:
Would live these knitted slipper boot patterns but they wouldn't print
07.10.2014 kl. 04:52:DROPS Design answered:
Dear Mrs Marshall, when you click on the button "Print:pattern", make sure your browser allows popup windows, a new window with an add will open, click on "continue to print the pattern" in this new window to launch printing. Happy knitting!
07.10.2014 kl. 09:24:
Ann Marie Marshall wrote:
Please I need help on the pattern slippers 158-47 I do not understand the pattern I wish it was written out better that that
03.10.2014 kl. 19:53:DROPS Design answered:
Dear Mrs Marshall, you first work some rounds around ankle, then work the upper foot over the first 10 sts (inc 1 st each side), then work around picking up sts along both side of upper foot to finish with sole. A video will comme soon, please stay tuned. Happy knitting!
04.10.2014 kl. 17:20:
Nadine Lowden wrote:
Pattern says all slippers require 300g. but when you go to order it is only 200g. I am confused. will 200g do a pair.
03.10.2014 kl. 16:42:DROPS Design answered:
Dear Mrs Lowden, you need 300 g Andes to work these slippers, ie 3 balls Andes, check stock of your Drops store and contact them if necessary to know when they will have more if they don't have 3 balls right now. Happy knitting!
03.10.2014 kl. 16:49:
Marie Hall wrote:
What is the tension for the slipers
01.10.2014 kl. 18:14:DROPS Design answered:
Dear Mrs Hall, tension to this pattern is 13 sts x 17 rows in stockinette st = 10 x 10 cm ( 4'' x 4''). Happy knitting!
02.10.2014 kl. 08:58:
Amanda wrote:
I'm trying to make the foot i just want to know where it says K2 tog on each side of marker 4 a round is it with each marker as it says to put 2 markers. I've knitted patterns before but I'm so confused with this one
30.09.2014 kl. 17:34:DROPS Design answered:
Dear Amanda, you insert 2 markers, one at the mid top of toe and the 2nd one at the mid heel, then work K2 tog each side of these both markers = 4 dec sts per dec round (= every other round). You dec then 2 sts on top of toe and 2 sts on mid back. Happy knitting!
01.10.2014 kl. 09:18:
Rose MAcPherson wrote:
Is there a video that I can watch for this pattern,. I do not understand it at all. I have started them but have no idea how or what to do. Thank you for any help at all.
22.09.2014 kl. 17:57:DROPS Design answered:
Dear Mrs MacPherson, a video showing how to work this pattern be uploaded as soon as possible. Stay tuned ! Happy knitting!
02.10.2014 kl. 14:08:
Cindy wrote:
I am not used to a pattern explained this way. I am used to row 1... row 2... row 3.. etc. But these patterns are so beautiful! I have to try. Will let you know how it goes :)
19.09.2014 kl. 05:39:
Knut wrote:
27-27-29 refers to different sizes, 37-37-37 also
18.09.2014 kl. 08:29:
Terry wrote:
I am stuck at the foot. I have done the leg, 37-37-39. Next I am to keep first 10 stiches on the needle, then put remaining 27-27-29 on a stich holder. 37-37-39 = 113. 10 + 27-27-29 = 93. where are the remaining 20 stiches?
18.09.2014 kl. 02:45:DROPS Design answered:
Dear Terry, when leg part is done, you work foot over the first 10 sts, the remaining 27 sts (1st and 2nd size) or 29 sts (3rd size) go onto a st holder. You then work over the first 10 sts the lenght stated for your size, then pick up sts (either 12, 14 or 16 sts - see size) each side of the middle piece + knit back sts from st holder = 61 sts in 1st size, 65 sts in 2nd size, 71 sts in larger size). Happy knitting!
18.09.2014 kl. 09:00:
Darlene wrote:
I Have never knitted a pattern that is so confusing it it knitted on round needles or on 2 double needles please help if you can.
16.09.2014 kl. 19:49:DROPS Design answered:
Dear Darlene, you start working leg in the round on double pointed needle, then work the top of foot back and forth, pick up sts each side of the middle upper foot and continue in the round over all sts dec for shaping. The edge around the leg is then worked back and forth and sew to the leg. Happy knitting!
17.09.2014 kl. 08:57:
Andrea wrote:
A great pattern. Quick and easy to knit, comfy and cozy to wear. Would definitely make again.
14.09.2014 kl. 03:45:
Helene wrote:
Just the ticket for warm toes on a frosty winter's night! I would sew a leather sole onto the bottom of the slipper for durability.
04.07.2014 kl. 22:35:
Tordis Skurdal wrote:
Ser tøffe ut, og varmer godt oppover leggen
25.06.2014 kl. 22:15:
Isabel Campos wrote:
Fantásticas para andar em casa
21.06.2014 kl. 21:12:
Martina Herold wrote:
Möchte ich auf jeden Fall im Winter nicht vermissen !!!
15.06.2014 kl. 21:04:Amalia Briceño wrote:
Las quiero tejer para mis 5 hijas y 7 nietas
15.06.2014 kl. 16:52:
Fatemeh wrote:
Varm og god, for kalde vinter dager
05.06.2014 kl. 13:41:We would love to hear what you have to say about this pattern!
Si vous souhaitez poser une question, merci de bien vouloir vérifier que vous avez choisi la bonne catégorie dans le formulaire ci-dessous afin d'accélérer la réponse.
Votre adresse mail ne sera pas publiée. Les champs obligatoires sont indiqués par une *.
Peut on faire ce modèle avec des aiguilles circulaires svp merci 🙏 de votre réponse
29.10.2022 kl. 22:09: