Gladys Freer wrote:
What is the yardage needed to make this head band? Thank you.
14.11.2022 kl. 21:39:DROPS Design answered:
Hi Gladys, The Drops yarn has approx. 82 yards per ball and you need 2 balls. Happy knitting!
15.11.2022 kl. 07:00:Marie wrote:
Danke für die schnelle Antwort !
09.10.2019 kl. 13:50:Marie wrote:
Muß die 1. Reihe von M2 eine Rückreihe nach der Reihe M1 sein?
09.10.2019 kl. 10:48:DROPS Design answered:
Liebe Marie, ja genau, M.1 wird eine Hin-Reihe, so daß M.2 beginnt mit einer Rückreihe, so daß die Zöpfe bei Hinreihen gestrickt werden. Viel Spaß beim stricken!
09.10.2019 kl. 11:17:Luisa wrote:
Sorry one question how do I work the wrong side or it is on the diagrams for both sides wrong and right sides thanks much
25.08.2019 kl. 13:04:DROPS Design answered:
Dear Luisa, this pattern is worked flat, back and forth on needles. The diagram shows both right and wrong rows: start to read it from bottom right corner to left for right side rows and from left to right for wrong side rows. Happy knitting!
25.08.2019 kl. 15:32:Tammy wrote:
This ear warmer looks soooo cute. Is there a written pattern or only the chart? I’ve tried to do charts but I just haven’t been able to do them successfully.
18.11.2018 kl. 22:53:DROPS Design answered:
Dear Tammy, there are only diagrams to this pattern - 1 square in diagram = 1 row - both RS and WS rows are shown in diagram. Start M.1 from the right side reading from the right towards the left (= you increase 5 sts) then work M.2 starting on the bottom corner on the left sdie from WS towards the right - and work RS rows from the right towards the left. See diagram key to know how to work each stitch. Happy knitting!
19.11.2018 kl. 09:19:Patty wrote:
I actually figured it out how to get 30 stitches. Please clarify which direction to read the different rows on the chart. Thanks much!
18.09.2018 kl. 19:14:DROPS Design answered:
Dear Patty, M.1 is worked from RS = from the right towards the left. M.2 is worked beginning from WS = start on the bottom corner on the left side and read WS rows from the left towards the right and the RS rows from the right towards the left. M.3 will be then worked from RS = from the right towards the left. Happy knitting!
19.09.2018 kl. 09:28:Patty wrote:
I have read over this several times. After M1, I am not sure how you get 30 stitches?? the 3 garter stitches, M1 (19 stitches) and 3 garter stitches = 19 + 6 = 25. So after M1 I end up with 25 stitches. Please clarify. It seems like many people have had the same question. Thank you
18.09.2018 kl. 19:02:DROPS Design answered:
Hi Patty. It is correct that M.1 is worked across 19 stitches, but in 5 of those stitches you'll work 2 stitches in one = 5 stitches increased. So after M.1 is worked once, you'll have 30 stitches on the needle: 3 garter + 24 M.1 (including 5 increased) + 3 garter. Happy knitting.
01.10.2018 kl. 15:47:Sharon F. wrote:
Just made this but am confused. Based on my counting (since the rows are not numbered like American patterns), I thought row1 of M.2 was supposed to be on the right side, but then the cabled ended up being on the wrong side. I just repeated the past row. Are you supposed to start R1 on the wrong side? I am starting another one and want to make sure this is done correctly. Also, can you do a provisional cast on and attach with the Kitchener stitch?
06.01.2018 kl. 00:58:DROPS Design answered:
Dear Sharon, when you start the piece and setting up the pattern, you start with the pattern M.1 which you knit on the right side, then start with M.2; its first row from the wrong side. That way you will do the cables in the RS. I hope this helps. Also, if you prefer kitchener stitch, you can start with provisional cast on. Happy Knitting!
06.01.2018 kl. 12:55:Marjorie Odor Elizondo wrote:
Gracias por compartir tanta belleza, sin egoismo,y desinteresadamente. Exitos por siempre !!!!
29.02.2016 kl. 07:18:Renee Goldman wrote:
I have reached M2 of the Drops 126-24 and find that the pattern is only for 27 stitches, while I have 30 stitches after M1? What happens to the three stitches (The 27 stitches includes the 3 garter stitches).
20.12.2015 kl. 00:28:DROPS Design answered:
Dear Mrs Goldman, after M1 you have a total of 30 sts and work these 30 sts as follows: 3 sts in garter st, 24 sts in M2 (1st row in M2 = WS = K4, P5, K1, P4, K1, P5, K4), 3 sts in garter st = 30 sts. Happy knitting!
21.12.2015 kl. 10:32:Linda Carney wrote:
Love the pattern and the headband!! Making for friends an family.
13.12.2015 kl. 10:24:Heather wrote:
Can you please tell me the width measurement for this headband, thanks.
23.11.2015 kl. 17:48:DROPS Design answered:
Dear Heather, with the given tension, it will be a bit less than 12 cm (cables tighten work). Happy knitting!
24.11.2015 kl. 09:09:Pat wrote:
I don't know how you got to the 30 stitches. I casted on 25 stitches and then work first two rows in garter stitch. How do I get to the 30 stitches? Thanks! Pat
01.09.2015 kl. 19:36:DROPS Design answered:
Dear Pat, after the first 2 rows in garter st, you work diagram M.1 (= 19 sts) with 3 sts in garter st in each side - M.1 = 1 row including 5 inc - see diagram and text to diagram. Happy knitting!
02.09.2015 kl. 09:41:Lina Curry wrote:
Sorry but I am still confused do I work am three and back to M1 and again m tow after the 11 Rows please explain really appreciate it thank you
28.01.2015 kl. 17:31:DROPS Design answered:
Dear Mrs Curry, work first M1 (=19 sts) on next row from RS after the 2 rows in garter st - M1 is only 1 row - Then work M2 (1st row = from WS) and repeat M2 in height until piece measures 52-57 cm, then work M3 (= 1 row) and 2 rows garter st. (click here to read more about diagrams). Happy knitting!
29.01.2015 kl. 09:35:Lina Curry wrote:
Hi I have worked 9 row of pattern with 30 sitches I decreased on the 10 row I have 25 sitches how do I get back my 30 Stiches thank you
25.01.2015 kl. 18:14:DROPS Design answered:
Dear Mrs Curry, you first work M.1 (1 row), then over the 30 sts repeat M.2 in height until piece measures 52-57 cm (work until row 11 in M.2) then work M.3 (= 1 row = 25 sts). Happy knitting!
26.01.2015 kl. 10:31:Bozena Karol wrote:
Hi, I have a question: It seems that the description does not match the diagram. It says cast on 25sts but M1 shows only 19 sts? What happened to the remaining 6sts? thanks, Bozena
17.01.2015 kl. 22:38:DROPS Design answered:
Dear Mrs Bozena, you work M1 over the 19 sts with 3 garter sts each side (= 25 sts), when M1 has been worked, you have a total of 30 sts, continue with 3 garter sts each side. Happy knitting!
19.01.2015 kl. 11:37:Dianne wrote:
Is there somewhere that this pattern is written out in step by step directions.
08.12.2014 kl. 16:21:DROPS Design answered:
Dear Dianne, you can follow written pattern and diagrams at the same time - see related videos to that pattern under tab "videos" - and click here to read more about diagrams. Happy knitting!
08.12.2014 kl. 17:08:Anne wrote:
Regarding this pattern: what do you mean by work two sts. in this stitch on M1. Do you mean to K2tog.?
17.11.2014 kl. 22:37:DROPS Design answered:
Dear Anne, work 2 sts in a st means to work this st alternately into front and back loop (inc 1 st) as shown in the video below. Happy knitting!
18.11.2014 kl. 09:12:Alice wrote:
I would like to knit this head band Can you explain to me what does M1 M2 & M3 mean in this pattern and also what does the two dots mean in the patter on M1 Thank you
10.11.2014 kl. 00:10:DROPS Design answered:
Dear Alice, M1, M2 and M3 refer to the diagrams you will find at the bottom of the pattern (read more about diagrams here) - Each symbol correspond to a diagram text that is explained just above diagrams, each dot in a square means to work this st twice, ie in front & back loop. Happy knitting!
10.11.2014 kl. 10:18:Alkisti wrote:
Hi! I just wanted to know if the diagramm is worked from bottom up and from right side to left all the way up. I'm new with diagramms. Thanks
29.08.2014 kl. 18:03:DROPS Design answered:
Dear Alkisti, in each diagram 1 square = 1 st x 1 row. RS rows are worked from right to left and WS rows from left to right. Start M.2 at the bottom corner on the right side. Happy knitting!
01.09.2014 kl. 09:04:Elizabeth wrote:
What do you mean when you wrote: "... adjust to after row 11" in this sentence: "Now work M.2 with 3 garter sts each side until piece measures approx. 20½"-22½'' – adjust to after row 11 or 23 in M.2."
08.12.2013 kl. 02:43:DROPS Design answered:
Dear Elizabeth, it means you work M2 until piece measures 20½"-22½'' but adjust to stope after you have worked row 11 or 23 of the diagram. Happy knitting!
08.12.2013 kl. 20:55:Lota wrote:
Har fått ihop det nu :-)
01.12.2013 kl. 22:43:Lotta wrote:
Lika förvillad som Julie. Flätan kommer ju på ett avigt varv, om mönstret börjar med ett rät-varv???
01.12.2013 kl. 20:17:Lilly wrote:
Ciao , dite di lavorare in giri di andata e ritorno ma il filo nel giro di ritorno per continuare la lavorazione me lo ritrovo dalla parte opposta all'inizio del ferro. come fare per continuare la lavorazione?
23.11.2013 kl. 09:14:DROPS Design answered:
Buongiorno Lilly, deve lavorare M.2 avanti e indietro sui ferri, lavora il primo ferro seguendo il diagramma dal basso, da destra verso sinistra, gira il lavoro e lavorare il ferro di ritorno seguendo la seconda riga del diagramma da sinistra verso destra, e così via. Nella legenda è indicato come lavorare i punti sul rovescio del lavoro. Buon lavoro!!
23.11.2013 kl. 12:39:MEL wrote:
What do I knit for the wrong rows
07.09.2013 kl. 00:27:DROPS Design answered:
Dear Mel, all rows are shown in the diagrams, both RS and WS rows, so that eg, white square = K from RS and P from WS and x in square = P from RS and K from WS. Happy knitting!
07.09.2013 kl. 10:00:Gigi wrote:
Bonsoir, merci de m'expliquer : ajuster après le rang 11
10.01.2013 kl. 22:09:DROPS Design answered:
Bonjour Gigi, il faut que le rang 11 ait été tricoté. Bon tricot !
11.01.2013 kl. 08:58:Gigi wrote:
Que veux dire ajuster au 11 rang? Merci
10.01.2013 kl. 22:03:Elvia Mendivil wrote:
Hay un error los puntos no dan como los tiene distribuidos agradesco su atencion
28.10.2012 kl. 01:47:MARA wrote:
ME GUSTARIA ESTE PATRON
24.03.2012 kl. 22:11:DROPS Design answered:
Hola Mara, solo tienes que hacer clic en el link debajo de la fotografía.
25.03.2012 kl. 05:03:Sharon Brunotte wrote:
I just want to understand a wording. The pattern said work 2 sts in this st. What does this mean.
01.03.2012 kl. 04:22:DROPS Design answered:
It means that you will knit both into front and back loop, and this is to increase a stitch (aka kfb)
01.03.2012 kl. 18:07:Julie wrote:
Confused by pattern. row 1-K, row 2-K, row 3 is the M. 1 (right side), then row 4 is the M. 2 first row of pattern, should be wrong side, but messes up row with cable which should be right side (2 rows down from first row of M.2) Help! .
09.02.2012 kl. 02:26:Drops Design France wrote:
Tout à fait Micheline, on monte 25 m, après M.1 on a 30 m, on tricote donc M.2 (= 24 m) avec 3 m point mousse de chaque côté = 30 m.
02.12.2010 kl. 09:17:Micheline wrote:
Vous dites de monter 25mailles et le diagramme se fait sur 24 mailles!!
01.12.2010 kl. 20:20:Barbara wrote:
I love these headbands. A wonderful alternative to the hat. Sporty and feminine.
13.07.2010 kl. 09:16:Cornelia wrote:
Bitte bitte diese Strickanleitung in deutsch. Meine Freundin wünscht sich schon so lang ein schönes Stirnband
01.07.2010 kl. 22:50:Vi vil gjerne høre din mening om denne modellen!
Hvis du ønsker å stille et spørsmål, husk å velge riktig kategori i menyen under - det vil sørge for at du får svar raskere.
Din mailadresse vil ikke synes. Obligatoriske felt er markert med *.
Nicole Rivard wrote:
Comment fait-on pour ajuster au 11 e ou 23e rang du M2? \r\nEt le M3, est-ce qu\'il se tricote quand on a finit au complet le diagramme M2? Merci
02.11.2021 kl. 16:53: