DROPS Muskat
DROPS Muskat
100% Cotton
from 1.50 € /50g
Get the yarn to make this pattern from 19.50€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Enchanted Evening

Knitted dress in DROPS Muskat. Piece is knitted top down with round yoke, knot pattern and short sleeves. Size: S - XXXL

DROPS 211-1
DROPS design: Pattern no R-762
Yarn group B
----------------------------------------------------------

SIZE:
S - M - L - XL - XXL - XXXL

MATERIALS:
DROPS MUSKAT from Garnstudio (belongs to yarn group B)
650-700-750-800-900-1000 g colour 76, light denim

KNITTING TENSION:
21 stitches in width and 28 rows vertically in stocking stitch and knot pattern and pattern = 10 x 10 cm.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 4 mm
DROPS CIRCULAR NEEDLE SIZE 4 mm : Length 60 and 80 cm for stocking stitch and knot pattern.
DROPS DOUBLE POINTED NEEDLES SIZE 3 mm
DROPS CIRCULAR NEEDLE SIZE 3 mm: Length 40 and 80 cm for rib.
Needle size is only a suggestion! If you have too many stitches on 10 cm switch to a larger needle size. If you have too few stitches on 10 cm switch to a smaller needle size.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Muskat
DROPS Muskat
100% Cotton
from 1.50 € /50g
Get the yarn to make this pattern from 19.50€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

PATTERN: 
See diagrams A.1 and A.2. Choose diagram for your size (applies to A.1).

INCREASE/DECREASE TIP (evenly):
To calculate how to increase/decrease evenly use the total number of stitches on row (e.g. 120 stitches) , and divide stitches by number of increases/decreases to be done (e.g. 18) = 6.7. 
In this example increase by making 1 yarn over after alternately approx. every 6th and 7th stitch. On next round knit yarn overs twisted to avoid holes.
If decreasing knit in this example alternately approx. every 5th and 6th stitch and every 6th and 7th stitch together.

INCREASE TIP-1 (applies to waist on body):
Increase 1 stitch after 1st and 3rd marker thread and before 2nd and 4th marker thread as explained below.
INCREASE AS FOLLOWS AFTER MARKER THREAD:
Knit 1 stitch in loop around first stitch on left needle (i.e. In stitch from previous round).
INCREASE AS FOLLOWS BEFORE MARKER THREAD: Work until marker thread, then knit 1 stitch around outermost stitch on right needle (i.e. in stitch from previous round).

INCREASE TIP-2 (applies to sides of body):
Increase the same way before and after marker as explained in INCREASE TIP-1, but increase alternately before and after marker. I.e. increase only 1 time in each side every 1½ cm and this happen alternately before and after marker (not on each side).

DECREASE TIP (applies to waist of body):
The first decreases will be at the same time as working pattern. Adjust to decrease on a round without knots, and note that there will be fewer stitches in stocking stitch between 2 knots after a decrease.
Decrease 1 stitch after 1st and 3rd marker thread and before 2nd and 4th marker thread as explained below.
DECREASE AS FOLLOWS AFTER MARKER THREAD:
Slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked
DECREASE AS FOLLOWS BEFORE MARKER THREAD:
Work until 2 stitches remain before marker thread, knit 2 together.

CAST-OFF TIP:
To avoid a tight cast-off edge you may use a larger needle size. If this also is too tight, work a 1 yarn over after approx. every 8th stitch while casting off (cast off yarn overs as regular stitches).

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

DRESS - SHORT OVERVIEW OF THE PIECE:
Work neck edge and yoke in the round on circular needle from mid back, top down. Divide yoke for body and sleeve edges. Body is worked in the round on circular needle, top down. Work sleeve edges in the round on double pointed needles, top down.

NECK EDGE:
Cast on 120-124-130-134-138-140 stitches on a short circular needle size 3 mm with Muskat. Knit 1 round. Then work rib in the round (= knit 1/purl 1) for 4 cm.
Knit 1 round while increasing 18-26-32-16-22-35 stitches evenly - read INCREASE/DECREASE TIP = 138-150-162-150-160-175 stitches. Knit 1 round where yarn overs are knitted twisted.
Insert 1 marker in the middle of round (= mid front). Measure yoke from this marker! Then work yoke as explained below.

YOKE:
Switch to circular needle size 4 mm and work A.1 in the round (= 23-25-27-30-32-35 repetitions of 6-6-6-5-5-5 stitches). Continue pattern like this , and increase as shown in A.1. REMEMBER THE KNITTING TENSION!
When A.1 has been worked, there are 230-250-270-300-320-350 stitches on needle. Then work A.2 in the round (= 23-25-27-30-32-35 repetitions of 10 stitches). Continue pattern like this and increase as shown in A.2. After last increase in A.2 there are 276-300-324-360-384-420 stitches on needle.

Work until piece measures 17-19-21-23-25-27 cm from marker at the neck - NOTE: Work A.2 as far as you can until correct measurements and in some sizes A.x must be repeated vertically until correct measurements (pattern should continue on body).
Now divide yoke for body and sleeves, i.e. work next round as follows from mid back:
Work 38-42-45-51-56-62 stitches as before (= ½ back piece), slip the next 62-66-72-78-80-86 stitches on 1 stitch holder for sleeve edge, cast on 6-6-8-8-10-10 new stitches on row (= in the side under sleeve), work 76-84-90-102-112-124 stitches as before (= front piece), slip the next 62-66-72-78-80-86 stitches on 1 stitch holder for sleeve edge, cast on 6-6-8-8-10-10 new stitches on row (= in the side under sleeve) and work the remaining 38-42-45-51-56-62 stitches as before (= ½ back piece). Cut the yarn. Finish body and sleeve edges separately. NOW MEASURE PIECE FROM HERE!

BODY:
= 164-180-196-220-244-268 stitches. Insert 1 marker in each side on body, in the middle of the 6-6-8-8-10-10 stitches cast on under each sleeve. Insert in addition 4 marker threads in the piece as follows:
Count 21-24-27-32-37-42 stitches from marker in one side of piece, insert 1st marker thread before next marker, count 40-42-44-46-48-50 stitches, insert 2nd marker thread before next stitch, count 42-48-54-64-74-84 stitches (maker in the side is in the middle of these stitches), insert 3rd marker thread before next stitch, count 40-42-44-46-48-50 stitches, insert 4th marker thread before next stitch. 21-24-27-32-37-42 stitches remain on round after last marker thread. Move the marker threads upwards when working; they should be used for decrease and increase later.
Now continue A.x while AT THE SAME TIME decreasing in the sides on body as explained below:
Begin round at marker in one side of piece and work A.x in the round, but make sure to continue on correct row in diagram according to where piece was divided, and make sure to place knots correctly over knots on yoke. Work 6-6-8-8-10-10 stitches cast on under each sleeve in stocking stitch.
When piece measures 6 cm from division in all sizes, finish A.x, but finish after 1 round with knots. Continue to work stocking stitch in the round over all stitches.

AT THE SAME TIME when piece measures approx. 3 cm from division in all sizes, decrease 1 stitch after 1st and 3rd marker thread and before 2nd and 4th marker thread – read DECREASE TIP (= 4 stitches decreased).
Decrease like this every 2½ cm 4 times in total vertically = 148-164-180-204-228-252 stitches.

When piece measures 16 cm from division in all sizes, increase 1 stitch after 1st and 3rd marker thread and before 2nd and 4th marker thread – read INCREASE TIP-1. Increase in addition 1 stitch at marker in each side - read INCREASE TIP-2 (= 6 stitches increased in total on round). Increase like this every 2 cm 21 times vertically in all sizes = 274-290-306-330-354-378 stitches.
Work without increases until piece measures approx. 61-62-63-64-65-66 cm from division (approx. 2 cm remain until finished measurements, try the dress on and work to desired length).
Knit 1 round while increasing 20-22-24-26-26-28 stitches evenly = 294-312-330-356-380-406 stitches (increase a little to avoid the rib to be worked from contracting the edge).
Switch to circular needle size 3 mm. Work rib in the round = knit 1/purl 1 for 2 cm. Cast off with knit over knit and purl over purl - read CAST-OFF TIP. Dress measures approx. 85-88-91-94-97-100 cm from shoulder and down.

SLEEVE EDGE:
Slip the 62-66-72-78-80-86 stitches from stitch holder in one side of piece on double pointed needles size 4 mm and pick in addition up 1 stitch in each of the 6-6-8-8-10-10 new stitches cast on under sleeve = 68-72-80-86-90-96 stitches. Begin round in the middle of the 6-6-8-8-10-10 stitches that were cast on under sleeve and work 3 rounds in stocking stitch. AT THE SAME TIME on last round decrease 4-4-4-4-2-2 stitches evenly - remember INCREASE/DECREASE TIP = 64-68-76-82-88-94 stitches.
Switch to double pointed needles size 3 mm. Work rib in the round = knit 1/purl 1 for 3 cm. Cast off with knit over knit and purl over purl - remember CAST-OFF TIP! Sleeve edge measures approx. 4 cm from division. Work the other sleeve edge the same way.

This pattern has been corrected.

Updated online: 28.04.2020
New charts: A.1(S-M-L)- row 10. A.1(XL-XXL-XXXL) - row 14.
Updated online: 18.01.2021
Correction: Diagrams updated

Diagram

symbols = knit
symbols = Knot: Purl 3 together, do not slip stitches off the needle, but knit 3 together and then purl together 1 more time, slip all 3 stitches off the left needle.
symbols = increase 1 stitch by knitting into 1 stitch from previous round (i.e. In loop behind first stitch on left needle), do not slip stitches off the needle, knit the stitch on needle and slip the stitch off the needle.
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 211-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (60)

country flag Yulia wrote:

Hi! Still about the enchanted evening dress. In my question before, i mean: what method that we use to increase ( increase at diagram A.1 & A.2). Is that a left lifted increase(LLI)? Thx

10.10.2023 - 05:17

DROPS Design answered:

Hi Yulia, You increase in diagrams A.1 and A.2 as described in the description above (for the open diamond). Happy knitting!

10.10.2023 - 06:40

country flag Yulia wrote:

Hi! About enchanted evening dress. Now I’m working on diagram A.1 and A.2. Can you show me the video on how to do the increase at diagram? Because I’m little bit confuse about the description about the increase on diagram. Thx

10.10.2023 - 03:50

DROPS Design answered:

Dear Yulia, sure, this video shows how to increase - look at the increase towards left side. Happy knitting!

10.10.2023 - 09:15

country flag Audrey wrote:

Hallo liebes Team. Ich versteh nicht ganz wie ich in dem Diagramm die Maschen hinzufügen soll. ich vermute, dass dafür das Video "Aufnehmen 4- aus der Masche der Vorreihe" gedacht ist. aber ich verstehe nicht, warum in dem Video einmal von rechts und einmal von links die Masche verwendet wird und wie ich das jetzt auf das Diagramm beziehen muss. Danke für die Hilfe :)

25.09.2023 - 14:02

DROPS Design answered:

Liebe Audrey, in diesem Video zeigen wir, wie so eine Zunahme gestrickt wird. In dem Video zeigen wir beide "Seite", im Kleid strickt man wie bei der "linke Seite" erklärt, dh zuerst die Zunahme stricken, dann die Masche selbst. Viel Spaß beim stricken!

25.09.2023 - 15:42

country flag Emma wrote:

I'm trying to understand which size I should knit based on the finished dimensions. Could you indicate whether this is meant to have positive, negative, or no ease?

08.09.2023 - 17:18

DROPS Design answered:

Dear Emma, you can see the finished measurements in cm in the schematic after the pattern instructions. This model has little ease and it's meant to be fit. Happy knitting!

10.09.2023 - 19:18

country flag Combes wrote:

Bonjour, je ne comprends pas le passage sur AUGMENTATIONS-2 On me demande de faire 6 augmentation par tour en utilisant cette façon d'augmenter mais nous avons 4 marqueurs donc ce serait soit 4 soit 8 mais 6 je ne sais pas à quels marqueurs augmenter. J'ai compris qu'il ne fallait pas augmenter en même temps des deux côtés du même marqueur mais pourquoi 1,5 cm ? Ce ne serait pas plutôt tous les 1 cm augmenter de nouveau au niveau de 2 marqueurs ainsi passe de 4 augmentations à 6.

19.07.2023 - 17:24

DROPS Design answered:

Bonjour Mme Combes, vous devez augmenter 6 mailles au total: 1 maille de chaque côté de la robe (1 maille à chacun des 2 marqueurs sur les côtés) + 1 maille à chacun des 4 fils marqueurs (alternativement avant et après ces fils marqueurs). Bon tricot!

28.07.2023 - 08:56

country flag Tanja wrote:

Enchanted Evening: Ich möchte das Kleid gerne mit langen glatten Ärmeln statt der kurzen Puffärmel stricken. Gibt es dazu eine Anleitung? Danke für eine Hilfestellung!

12.01.2023 - 16:13

country flag Tanja wrote:

Enchanted Evening: Ich möchte das Kleid gerne mit langen Ärmeln anstelle der kurzen Puffärmelchen stricken. Gibt es dazu auch eine Anleitung? Danke für eine Hilfestellung!

12.01.2023 - 16:10

DROPS Design answered:

Liebe Tanja, leider können wir nicht jede Anleitung nach jeder Anfrage anpassen - aber vielleicht kann Ihnen die Anleitung von diesem Pullover weiterhelfen bzw inspirieren. Viel Spaß beim stricken!

12.01.2023 - 16:30

country flag Helena wrote:

Hej, Jag har stickat Enchanted evening men har problem med att mudden längst ner på kjolen viker upp sig. Det är inte att den rullar sig utan hela mudden viker upp sig (den viker sig i brytningen mellan slätstickning och mudd) Vad kan jag göra för att få den att inte vika upp sig?

17.12.2022 - 16:34

DROPS Design answered:

Hei Helena. Prøv å dampe kanten lett eller fukte den og sett den fast med nåler og la den tørke flatt. mvh DROPS Design

19.12.2022 - 08:21

country flag Neuloosi wrote:

"lisää 1. ja 3.merkkilangan jälkeen 1 silmukka ja lisää ennen 2. ja 4.merkkilankaa 1 silmukka Lisää myös kummankin sivun merkin molemmin puolin 1 silmukka (= työhön lisättiin yhteensä 6 silmukkaa)" Eikö silmukoita tule lisää 8 eikä 6?

07.12.2022 - 15:16

DROPS Design answered:

Hei, ohjeessa oli virhe. Merkkien kohdalla lisätään vain 1 silmukka, eli työhön lisätään yhteensä 6 silmukkaa. Ohjeeseen on tehty korjaus.

16.01.2023 - 18:11

country flag Eva wrote:

Hello! How large is the waist of different sizes? I can't find the measurements in the pattern.

23.04.2022 - 14:36

DROPS Design answered:

Dear Eva, the waist measurements are in the chart below the pattern instructions, in cm. They are: 35-39-43-49-54-60. Happy knitting!

23.04.2022 - 16:34