Seaside Watcher |
||||||||||||||||||||||
|
|
|||||||||||||||||||||
Knitted jumper in DROPS Air. The piece is worked with lace pattern and balloon sleeves. Sizes XS - XXL.
DROPS 212-43 |
||||||||||||||||||||||
------------------------------------------------------- EXPLANATIONS FOR THE PATTERN: ------------------------------------------------------- RIDGE/GARTER STITCH (worked back and forth): Knit all rows. 1 ridge in height = Knit 2 rows. PATTERN: See diagrams A.1 to A.3. Choose diagram for your size (applies to A.3). The diagrams show all rows in the pattern seen from the right side. DECREASE TIP-1 (evenly spaced): To work out how to decrease evenly, count the total number of stitches on needle (e.g. 100 stitches) and divide by number of decreases to be made (e.g. 11) = 9.09. In this example decrease by knitting approx. each 8th and 9th stitch together. INCREASE TIP: All increases are worked from the right side. Increase by making 1 yarn over on the inside of the 1 edge stitch on each side of the piece (= 2 stitches increased). On the next row the yarn overs are purled twisted. CASTING-OFF TIP: To avoid the cast-off edge being tight you can cast off with a larger size needle. If the edge is still tight, make 1 yarn over after approx. each 4th stitch at the same time as casting off and the yarn overs are cast off as normal stitches. ------------------------------------------------------- START THE PIECE HERE: ------------------------------------------------------- JUMPER – SHORT OVERVIEW OF THE PIECE:. The front and back pieces are worked separately back and forth with circular needle. Stiches are cast off for the armholes and neck and each shoulder is finished separately. The sleeves are worked back and forth with circular needle. The neck is worked after the garment has been sewn together. BACK PIECE: Cast on 88-94-100-106-115-124 stitches (including 1 edge stitch on each side of the piece) with circular needle size 4.5 mm and Air. Purl 1 row from the wrong side. Then work rib from the right side as follows: 1 edge stitch in GARTER STITCH – read description above, * purl 2, knit 1 *, work from *-* until there are 3 stitches left, purl 2 and finish with 1 edge stitch in garter stitch. When the rib measures 5 cm, knit 1 row from the right side where you decrease 11-11-11-11-12-11 stitches evenly spaced – read DECREASE TIP = 77-83-89-95-103-113 stitches. Purl 1 row from the wrong side. Change to circular needle size 5.5 mm. Work stocking stitch with 1 edge stitch in garter stitch on each side of the piece. REMEMBER THE KNITTING TENSION! When the piece measures 30-31-32-33-34-35 cm from the cast-on edge, cast off 4-4-4-5-6-6 stitches at the beginning of the next 2 rows for the armholes = 69-75-81-85-91-101 stitches. Continue with stocking stitch and 1 edge stitch in garter stitch on each side. When the piece measures 41-43-45-47-49-51 cm, place the middle 37-37-39-39-41-41 stitches on a thread for the neck, on the next row from the right side, and each shoulder is finished separately = 16-19-21-23-25-30 stitches on each shoulder. RIGHT SHOULDER: Continue with stocking stitch and 1 edge stitch in garter stitch on each side. Cast off on every row from the neck (i.e. at the beginning of each row from the wrong side) as follows: Cast off 1 stitch 2 times = 14-17-19-21-23-28 stitches. Cast off with knit from the right side when the piece measures 48-50-52-54-56-58 cm from the cast-on edge. LEFT SHOULDER: Work as for the right shoulder but when casting off for the neck, cast off at the beginning of each row from the right side. FRONT PIECE: Cast on 87-93-99-105-114-123 stitches (including 1 edge stitch on each side of the piece) with circular needle size 4.5 mm and Air. Purl 1 row from the wrong side. Then work rib from the right side as follows: 1 edge stitch in garter stitch, knit 1, * purl 2, knit 1 *, work from *-* until there is 1 stitch left and finish with 1 edge stitch in garter stitch. When the rib measures 5 cm, knit 1 row from the right side and decrease 10-10-10-10-11-10 stitches evenly spaced = 77-83-89-95-103-113 stitches. Purl 1 row from the wrong side. Change to circular needle size 5.5 mm. Then continue with pattern as follows: Work 1 edge stitch in garter stitch, 0-3-6-9-9-14 stitches in stocking stitch, A.1 (= 11 stitches), A.2 (= 10 stitches), A.3 (= 33-33-33-33-41-41 stitches), A.2 over 10 stitches, A.1 over 11 stitches, 0-3-6-9-9-14 stitches in stocking stitch and 1 edge stitch in garter stitch. When the piece measures 30-31-32-33-34-35 cm from the cast-on edge, decrease 4-4-4-5-6-6 stitches at the beginning of the next 2 rows for the armholes = 69-75-81-85-91-101 stitches. Continue with the pattern as before with the outermost stitch on each side worked in garter stitch. When the piece measures 38-39-41-42-43-44 cm, (finish neatly in relation to the pattern), place the middle 33-33-33-33-41-41 stitches on a thread for the neck on the next row from the right side and each shoulder is finished separately = 18-21-24-26-25-30 stitches on each shoulder. RIGHT SHOULDER: Continue with stocking stitch, A.1 and A.2 as before and the outermost stitch on each side worked in garter stitch. Cast off on each row from the neck (i.e. the beginning of each row from the right side) as follows: Cast off 2 stitches 1-1-1-1-0-0 time, then 1 stitch 2-2-3-3-2-2 times = 14-17-19-21-23-28 stitches. In sizes XS-S-M-L stop working pattern A.2; continue with purl over purl and stocking stitch over the other stitches. In sizes XL-XXL continue the pattern as before. The outermost stitch on each side is worked in garter stitch. Cast off with knit from the right side when the piece measures 48-50-52-54-56-58 cm from the cast-on edge. LEFT SHOULDER: Work as for the right shoulder but when casting off stitches for the neck, cast off at the beginning of each row from the wrong side. SLEEVE: Cast on 35-35-38-38-41-41 stitches (including 1 edge stitch in garter stitch on each side) with circular needle size 4.5 mm and Air. Purl 1 row from the wrong side. Then work as follows from the right side: Work 1 edge stitch in garter stitch, * purl 2, knit 1 *, work from *-* until there is 1 stitch left and finish with 1 edge stitch in garter stitch. When the rib measures 5 cm, knit 1 row from the right side and increase as follows: Work 1 edge stitch in garter stitch, knit 4-3-4-4-6-5, * 1 yarn over, knit 1 *, work from *-* until there are 5-4-5-5-7-6 stitches left, knit 4-3-4-4-6-5 and finish with 1 edge stitch in garter stitch = 60-62-66-66-68-70 stitches. Purl 1 row from the wrong side. Change to circular needle size 5.5 mm. Continue with pattern as follows: 1 edge stitch in garter stitch, 24-25-27-27-28-29 stitches in stocking stitch, A.2 over the next 10 stitches, 24-25-27-27-28-29 stitches in stocking stitch and 1 edge stitch in garter stitch. Repeat A.2 in height. When the sleeve measures 10 cm, increase 0-0-0-1-1-1 stitch inside the 1 edge stitch on each side of the piece – read INCREASE TIP. Increase like this every 8 cm a total of 0-0-0-2-2-3 times = 60-62-66-70-72-76 stitches. When the sleeve measures 47-47-47-46-44-42 cm from the cast-on edge, insert 1 marker inside the 1 edge stitch at the beginning of the row – it marks the bottom of the armhole. Work until the sleeve measures 50-50-50-49-48-46 cm. Cast off – read CASTING-OFF TIP! Work the other sleeve in the same way. ASSEMBLY: Sew the shoulder seams inside the cast-off edge. Sew the sleeve seams but leave a split of 3-3-3-3-4-4 cm at the top (i.e. from the marker). Sew the split to the bottom of the armhole and then sew the sleeves into the body. Sew the side seams inside the 1 edge stitch. NECK: Start on the one shoulder and knit up 75 to 96 stitches around the neck (number of stitches must be divisible by 3) with short circular needle size 4.5 mm and Air. Make sure the neck is neither tight nor loose in relation to the neck-line. Work rib in the round (= knit 1, purl 2) for 4 cm. Cast off with knit. |
||||||||||||||||||||||
Diagram explanations |
||||||||||||||||||||||
|
||||||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Comments / Questions (40)
Ronja Børsting Solberg wrote:
Hei! Stemmer det at ermer skal være kortere desto større størrelse du strikker? Ser at hvis du strikker en s så skal ermet være 50cm, men hvis du strikker en xl så skal det være 46cm.
04.03.2022 - 18:31DROPS Design answered:
Hei Ronja, Ermene er kortere i større størrelser pgs videre hals og lengre bærestykke. God fornøyelse!
07.03.2022 - 07:11Elizabeth wrote:
On the front piece in the smallest size, after you have cast off for the armholes there are only 7 stiches left for A-1 pattern instead of 11. How should I work the pattern with the reduced stitches? Or just do stocking stitch for remainder?
03.07.2021 - 23:23DROPS Design answered:
Dear Elizabeth, when -after decreasing- you do not have enough stitches for a pattern repeat, you knit those stitches with stockinett. Happy Kntting!
04.07.2021 - 00:46Martha wrote:
Hi, I really don't understand why you would seam the sleeves first then sew up the side seams of the front and back. I found it difficult to place the sleeves in and then sew up the side seam after I had sewn up the sleeves especially where there was the 5cm allowance for the sleeve. Really difficult to twist and sew in the sides This should have been to sew in the sleeves tops at the shoulders and front and back and then sew up the side seams and sleeve seams all in one go.
23.06.2021 - 04:04DROPS Design answered:
Dear Martha, see previous answer, hope this will help. Happy knitting!
23.06.2021 - 08:04Martha wrote:
Hi, I really don't understand why you would seam the sleeves first then sew up the side seams. I found it difficult to place them in and then sew up the side seam after I had sewn up the sleeves. This should have been to sew in the sleeves at the shoulders first and then sew up the side seams and sleeve seams all in one go.
23.06.2021 - 03:56DROPS Design answered:
Dear Martha, you first sew the shoulders and sew the sleeves; this video shows how to set a sleeve to a yoke/body - in the video the sleeve has been worked in the round, so that you can see how to sew the seamed sleeve on the yoke. But of course feel free to sew the sleeve how you are used to if you rather. Happy assembly!
23.06.2021 - 08:03Elfrieda wrote:
Ik heb een vraag over het voorpand. Ik ben aangekomen bij de armsgaten en ik vroeg me af of ik niet de armsgaten moet afkanten i.p.v. samenbreien zoals gezegd wordt. Voor het achterpand moet er wel afgekant worden, maar voor het voorpand moeten er volgens het patroon 5 steken geminderd worden aan elke kant. Ik ben hierdoor een beetje in de war geraakt.
23.04.2021 - 17:22DROPS Design answered:
Dag Elfrieda,
Ja, er moet denk ik inderdaad afgekant worden in plaats van geminderd. Ik zal het doorgeven aan de ontwerpafdeling ter correctie.
25.04.2021 - 18:04Nadia wrote:
Buonasera, ho chiesto spiegazioni in riferimento a questa descrizione, "Quando il lavoro misura 30-31-32-33-34-35 cm dal bordo di avvio, diminuire 4-4-4-5-6-6 maglie all’inizio dei 2 ferri successivi per gli scalfi = 69-75-81-85-91-101 maglie." io capisco che bisogna diminuire la mia misura 6 maglie ma tutte in una volta cioè primo ferro diminuisco 6 maglie all\'inizio e secondo ferro rovescio diminuisco altre 6 sempre all\'inizio? È così? Grazie
15.02.2021 - 20:56DROPS Design answered:
Buonasera Nadia, si, esatto, le 6 maglie devono essere diminuite insieme all'inizio dei 2 ferri successivi. Buon lavoro!
16.02.2021 - 22:48Nadia wrote:
"Quando il lavoro misura 30-31-32-33-34-35 cm dal bordo di avvio, diminuire 4-4-4-5-6-6 maglie all’inizio dei 2 ferri successivi per gli scalfi = 69-75-81-85-91-101 maglie." Io volevo capire esattamente come si lavora la dicitura qui sopra sono principiante e ho paura di non interpretare bene.
08.02.2021 - 11:59DROPS Design answered:
Buonasera Nadia, deve seguire i numeri per la sua taglia e diminuire le maglie indicate. Buon lavoro!
09.02.2021 - 21:51Mathilde wrote:
Bonjour, le modèle explique qu'il faut tricoter en aller-retour sur aiguilles circulaires, pensez-vous que je peux réaliser l'ouvrage avec des aiguilles normales ou il faut vraiment des circulaires ? Je vous remercie :)
16.01.2021 - 22:25DROPS Design answered:
Bonjour Mathilde, tout à fait, on utilise ici une aiguille circulaire pour avoir suffisamment de place pour y loger toutes les mailles. Pour le col, vous pourrez coudre d'abord une des épaules, tricoter le col et coudre l'autre épaule et le col. Cette leçon explique comment adapter un modèle sur aiguilles droites. Bon tricot!
18.01.2021 - 09:05Ashley wrote:
When the it says “when the sleeves measure 8cm to increase” does that mean from cast on edge or after the ribbing? Thanks.
09.01.2021 - 00:06DROPS Design answered:
Dear Ashley, measure the 10 cm (= 4 inches) before increasing from the cast on edge, then work these increases on every 8th cm = first increase will be worked at 10 cm, next at 18 cm, next at 26 cm etc.. Happy knitting!
11.01.2021 - 07:51Mariann wrote:
Hallo Dropsdesign, Ich habe Schwierigkeiten bei der Halsblende, da ich dem Text nicht entnehmen kann, ob man insgesamt im Ausschnitt 75-96 Maschen aufnehmen soll oder nur vorne? Ich habe vorne 33 Maschen stillgelegt und hinten 39, da ich den Pulli in L stricke. Wieviel Maschen soll ich denn jeweils vorne und hinten noch dazu aufnehmen und dann am Ende insgesamt auf der Nadel haben? Ich hoffe, Sie verstehen meine Frage. LG :)
07.12.2020 - 11:27DROPS Design answered:
Liebe Mariann, Maschen werden Sie auch in den Reihen zwischen den abgekettenen Maschen am Rückenteil und die stillgelegten Maschen vom Vorderteil aufgefassen (siehe Video) - Die Maschenanzahl können Sie immer bei der 1. Runde anpassen, damit die Halsblende nicht zu eng weder nicht zu locker ist, und durch 3 teilbar ist. Viel Spaß beim stricken!
07.12.2020 - 15:53