Noi saremmo felici di ricevere i tuoi commenti e opinioni su questo modello!
Se vuoi fare una domanda, fai per favore attenzione a selezionare la categoria corretta nella casella qui sotto per velocizzare il processo di risposta. I campi richiesti sono indicati da *.
Maria Nybro Rubech wrote:
Er der en video til udtagning. Jeg forstår nemlig ikke helt beskrivelsen
16.02.2024 - 07:52DROPS Design answered:
Hej Maria, ja, her ser du: udtagning med omslag men der er mange måder at tage ud på: Tag ud
16.02.2024 - 12:24Ace wrote:
Going off of last comment: you noted in another comment to do bind off at the beginning of the row. But this isn’t where the neck is. Wouldn’t it be at the end of the row, so it adds to the part that is already binded off? Also, is this part in the round or back and forth?
25.01.2024 - 19:44DROPS Design answered:
Dear Ace, when binding off for neck you work the stitches for the left shoulder (from RS), then cast off the middle stitches for neck, then work the remaining sts for right shoulder and finish each shoulder separately, next row from RS on right shoulder/from WS on left shoulder will start from neck towards armhole. Happy knitting!
26.01.2024 - 07:49Ace wrote:
Please respond in detail if able. I don’t understand in the back piece “Continue by binding off 1 stitch on the next row from the neck = 19-20-23-24-27-30 stitches.” What are those stitches supposed to denote? How many rows is this supposed to be? Just one or multiple? How do we know where the neck is supposed to be? This step is very unclear. I saw the previous answer to a similar question but it still does not make sense. Please clear this step up if able. Thank you so much.
25.01.2024 - 19:33DROPS Design answered:
Dear Mrs Ace, after you have cast off the middle stitches for neck you will work each shoulder separately to the finished measurements, if you cast off the sts from RS you are now working the right shoulder, work next row from WS, then at the beg of next row from RS (= from neck), cast off 1 stitch then continue as before over the remaining 19-20-23-24-27-30 sts and cast off when piece measures 54-56-58-60-62-64 cm. Then work left shoulder the same way, casting off 1 stitch at the beg of first row from neck/from WS. Happy knitting!
26.01.2024 - 07:48Claire wrote:
Can you clarify what is meant by "Continue by binding off 1 stitch on the next row from the neck = 19-20-23-24-27-30" in the "back piece" section?? also, when it says repeat on the other shoulder, what step do i start on?
11.01.2024 - 17:29Claire wrote:
Can you clarify (in the "back piece") what is meant by "Continue by binding off 1 stitch on the next row from the neck = 19-20-23-24-27-30" ? also, when it says do the same from the other shoulder, what step should i start on for this shoulder?
11.01.2024 - 17:28DROPS Design answered:
Dear Claire, if you worked first the left shoulder on back piece, you cast off for neck at the beg of every row from right side; when working the right shoulder you will cast off for neck at the beg of every row from wrong side. Happy knitting!
12.01.2024 - 07:44Claire H wrote:
When i start the back piece after completing the body in the round....am i switching to straight needles??! there is no indication to switch, but i just started the back piece in the round, and it does not look quite right
11.01.2024 - 05:03DROPS Design answered:
Hi Claire, You work the back and front pieces separately, after the body, back and forth. But you can continue to use circular needles even though you are working back and forth. Happy knitting!
11.01.2024 - 07:39Maja wrote:
Hej, Jag testade stickfastheten genom att sticka 12 maskor på bredden och 14 varv på höjden med slätstickning som ni angav ovan. Men rutan blir inte 10x10 utan ca 11x11 med sticka 9. Kommer tröjan ändå bli bra eller bör jag istället använda mig av sticka 8 istället för 9 och 7 istället för 8?
30.12.2023 - 20:59Claire wrote:
What differentiates the body from the back/front piece? are both knitted from bottom to top? in specifically the back piece, when it says continue with stripes, does it mean from where we left off from A1 in the body piece? if so, the instructions say this for: Continue with stockinette stitch and stripes according to A.1 to finished length" so finished length does not mean finishing the A1 diagram then? thanks!
29.12.2023 - 07:09DROPS Design answered:
Dear Claire, you first work body in the round then divide piece for armholes and finish back and front piece separately, stripes should continue the same way on both pieces, only neck shaping will be diferent (deeper on front piece). When you have finished A.1 in height, repeat from the first row to the last row as many times as needed. Happy knitting!
02.01.2024 - 10:19Claire wrote:
What size is the model wearing? :)
29.12.2023 - 04:57DROPS Design answered:
Dear Claire, most of the time our models are wearing either a size S or a size M; but as our bodies are all different, to find the best appropriate size measure a similar garment you have and like the shape and compare the measurements to the ones in the chart. Read more here. Happy knitting!
02.01.2024 - 10:17
Moroccan Market Muse |
|||||||||||||||||||
|
|
||||||||||||||||||
Maglione lavorato ai ferri a strisce in DROPS Melody. Taglie XS - XXL.
DROPS 212-20 |
|||||||||||||||||||
------------------------------------------------------- TECNICHE IMPIEGATE: ------------------------------------------------------- MOTIVO: Vedere i diagrammi A.1 e A.2. Ripetere A.1 in altezza fino alla fine del lavoro. SUGGERIMENTO PER GLI AUMENTI: Aumentare facendo 1 gettato a ogni lato del segnapunti + 1 maglia a ogni lato. Sul giro successivo lavorare i gettati a ritorto per evitare buchi. SUGGERIMENTO PER LE DIMINUZIONI-1 (distribuiti in modo uniforme): Per stabilire ogni quanto diminuire in modo uniforme, prendere il n° totale di maglie sul ferro (ad esempio 50 maglie) e dividerlo per il n° di diminuzioni da fare (ad esempio 20) = 2,5. In questo esempio lavorare insieme a diritto in modo alternato ogni 1° e 2° maglia e ogni 2° e 3° maglia. ------------------------------------------------------- INIZIO DEL LAVORO: ------------------------------------------------------- MAGLIONE – BREVE RIASSUNTO DEL LAVORO: Lavorare il corpo in tondo con i ferri circolari, dal basso verso l’alto. Dividere il lavoro per le maniche e finire avanti e indietro sui ferri. Lavorare le maniche in tondo con i ferri a doppia punta/ferri circolari corti, dall’alto in basso. CORPO: Avviare 120-128-140-148-160-176 maglie con i ferri circolari n° 8 mm e il grigio perla. Lavorare 1 giro diritto, poi lavorare a coste come segue: * 1 maglia diritto / 1 maglia rovescio *, ripetere *-*. Lavorare a coste per 4 cm, poi passare ai ferri circolari n° 9 mm. Continuare a maglia rasata e strisce seguendo A.1 fino alla fine del lavoro. FARE ATTENZIONE ALLA TENSIONE DEL LAVORO! Quando il lavoro misura 36-37-38-39-40-41 cm, lavorare il giro successivo come segue: intrecciare 1 maglia, lavorare 58-62-68-72-78-86 maglie, intrecciare 2 maglie, lavorare 58-62-68-72-78-86 maglie e intrecciare 1 maglia. Ora finire ogni lavoro in modo separato, avanti e indietro sui ferri. Mettere le prime 58-62-68-72-78-86 maglie in sospeso e continuare a lavorare le ultime 58-62-68-72-78-86 maglie per il dietro. DIETRO: = 58-62-68-72-78-86 maglie. Continuare a maglia rasata e strisce. Quando il lavoro misura 52-54-56-58-60-62 cm, intrecciare le 18-20-20-22-22-24 maglie centrali per il collo e finire ogni spalla in modo separato. Continuare a intrecciare 1 maglia sul ferro successivo dal collo = 19-20-23-24-27-30 maglie. Continuare a maglia rasata fino a quando il lavoro misura 54-56-58-60-62-64 cm (= 18-19-20-21-22-23 cm dal punto in cui è stata intrecciata 1 maglia a ogni lato per lo scalfo), intrecciare. Lavorare l’altra spalla nello stesso modo. DAVANTI: = 58-62-68-72-78-86 maglie. Continuare a maglia rasata e strisce. Quando il lavoro misura 47-49-51-53-55-57 cm, mettere le 12-14-14-16-16-18 maglie centrali in sospeso per il collo e finire ogni spalla in modo separato. Poi intrecciare le maglie su ogni ferro dal collo come segue: intrecciare 2 maglie 1 volta e 1 maglia 2 volte = 19-20-23-24-27-30 maglie sulla spalla. Continuare a maglia rasata fino a quando il lavoro misura 54-56-58-60-62-64 cm (= 18-19-20-21-22-23 cm dal punto in cui è stata intrecciata 1 maglia per lo scalfo), intrecciare. Lavorare l’altra spalla nello stesso modo. CONFEZIONE: Cucire i margini delle spalle. MANICHE: Lavorare le maniche con i ferri a doppia punta/ferri circolari corti, dall’alto in basso. Riprendere 44-46-48-50-52-54 maglie attorno allo scalfo nel filo più esterno delle maglie più esterne con i ferri circolari n° 9 mm e il colore mattone – iniziare dove il lavoro è stato diviso per il davanti e il dietro e riprendere 22-23-24-25-26-27 maglie fino al margine della spalla, riprendere 22-23-24-25-26-27 maglie dal margine della spalla e giù ancora fino alla divisione. Inserire 1 segnapunti al centro sotto la manica. Lavorare a maglia rasata e A.2. Quando il lavoro misura 30-29-28-27-26-23 cm, aumentare 1 maglia a ogni lato del segnapunti – leggere il SUGGERIMENTO PER GLI AUMENTI. Aumentare in questo modo ogni 5 cm per un totale di 3 volte per tutte le taglie = 50-52-54-56-58-60 maglie. Continuare a maglia rasata e A.2 fino a quando il lavoro misura 44-43-42-41-40-37 cm. Ora finire la manica con il grigio perla. Lavorare 1 giro diritto in cui diminuire 20-22-20-22-20-22 maglie in modo uniforme = 30-30-34-34-38-38 maglie. Passare ai ferri a doppia punta n° 8 mm e lavorare a coste (1 maglia diritto / 1 maglia rovescio) per 4 cm. Intrecciare con diritto su diritto e rovescio su rovescio quando la manica misura 48-47-46-45-44-41 cm. Lavorare l’altra manica nello stesso modo. COLLO: Iniziare dal diritto del lavoro con il grigio perla e i ferri circolari corti n° 8 mm. Riprendere 60-80 maglie (comprese le maglie in sospeso – il n° dev’essere divisibile per 2). Lavorare a coste (1 maglia diritto / 1 maglia rovescio) per 4 cm. Intrecciare con diritto su diritto e rovescio su rovescio. |
|||||||||||||||||||
Spiegazioni del diagramma |
|||||||||||||||||||
|
|||||||||||||||||||
Avete realizzato questo o un altro dei nostri modelli? Taggate le vostre foto nei social media con #dropsdesign in modo che possiamo vederle! Avete bisogno di aiuto con questo modello?Troverete video tutorial, una sezione per i commenti/domande e molto altro guardando il modello su www.garnstudio.com © 1982-2024 DROPS Design A/S. Ci riserviamo tutti i diritti. Questo documento, compreso tutte le sue sotto-sezioni, è protetto dalle leggi sul copyright. Potete leggere quello che potete fare con i nostri modelli alla fine di ogni modello sul nostro sito. |
Ace wrote:
Please respond in detail if able. I don’t understand in the back piece “Continue by binding off 1 stitch on the next row from the neck = 19-20-23-24-27-30 stitches.” What are those stitches supposed to denote? How many rows is this supposed to be? Just one or multiple? How do we know where the neck is supposed to be? This step is very unclear. I saw the previous answer to a similar question but it still does not make sense. Please clear this step up if able. Thank you so much.
25.01.2024 - 19:34