DROPS Safran
DROPS Safran
100% Cotton
from 1.45 $ /50g
Get the yarn to make this pattern from 2.90$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 60-24
DROPS 60-24
DROPS design: Pattern no E-062
--------------------------------------------------------
Sizes: S/M (M/L)
Bikini panties measurements: Width at front: 26 (29) cm = 10 1/4" (11 3/8").
Width at back: 31 (36) cm = 12 1/4" (14 1/4").
Materials: DROPS Safran Mouliné from Garnstudio
100 (150) g color no 44, light beige

DROPS Crochet hook size 3 MM = US C
Crochet gauge: 18 half double crochets and 14 rows = 10 x 10 cm = 4” x 4” with hook size 3 MM = US C. Remember hook size is only a guide!
-------------------------------------------------------

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Safran
DROPS Safran
100% Cotton
from 1.45 $ /50g
Get the yarn to make this pattern from 2.90$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
Instructions for crocheting:
Half double crochet: 1 yarn over, pick up strand through stitch below, 1 yarn over and pull strand through all loops on hook.
Decreasing: Decrease by working 1 less stitch.
Increasing: Increase 1 stitch by working 1 new chain stitch and on next row working this stitch as 1 new half double crochet.
Turning piece: At end of each row, work 1 chain stitch to turn. The first half double crochet on next row is replaced by 2 chain stitches.

Panties: Start at top of front piece and work in one go through to back piece. Read section above - Instructions for crocheting.
Work 46 (54) chain stitches + 2 to turn, with hook size 3 MM = US C and light beige. Work half double crochets. At the same time decrease in each side: 1 stitch x 2 (2) every row, then decrease 1 stitch x 13 (16) every 2nd row = 16 (18) stitches, piece measures approx. 20 (24) cm = 8" (9 1/2"). Work 6 (7) cm = 2 3/8" (2 3/4"), piece measures 26 (31) cm = 10 1/4" (12 1/4"). Now measure the piece onwards from here! Increase in each side: 1 stitch x 4 (4) every row, 1 stitch x 14 (17) every 2nd row, 1 stitch x 2 (2) every row = 56 (64) stitches, height of back piece = 24 (28) cm = 9 1/2" (11"). Cut and fasten strand. Work a cord of approx. 130 cm = 51 1/4" of chain stitches, thread it up and down through the first row at top of front and back pieces so that it can be tied at one side.

Bikini top: Work a cord of approx. 70 (70-70) cm = 27 1/2" (27 1/2"-27 1/2") of chain stitches with hook size 3 MM = US C and light beige, measure piece from here.
Row 1: Work 2 half double crochets in 2nd chain stitch from hook, turn with 2 chain stitches.
Row 2: 2 half double crochets in each half double crochet below (= 4 half double crochets), turn with 2 chain stitches.
Row 3: 1 half double crochet in first half double crochet, 2 half double crochets in next stitch, insert a marker thread, 2 half double crochets in next stitch, 1 half double crochet in last stitch (= 6 half double crochets), turn with 2 chain stitches.
Row 4: 2 half double crochets (1 stitch in each stitch), 2 half double crochets in next stitch, (marker thread), 2 half double crochets in next stitch, 2 half double crochets (1 stitch in each of the next 2 stitches) (= 8 half double crochets on row), turn with 2 chain stitches.
Row 5: 3 half double crochets (1 stitch in each stitch), 2 half double crochets in next stitch, (marker thread), 2 half double crochets in next stitch, 3 half double crochets (1 stitch in each of the next 3 stitches) (= 10 half double crochets on row), turn with 2 chain stitches.
Continue this increase with 1 half double crochet more on each side of the marker thread until there are 24 (28-32) half double crochets on row and the outside edge of piece measures approx. 9 (10-11) cm = 3 1/2" (4"-4 3/8"). On the next 6 rows increase only on every 2nd row = 30 (34-38) half double crochets on row - outside edge measures approx. 13 (14-16) cm = 5 1/8" (5 1/2"-6 1/4"). Then work half double crochets without increasing. Work until outside edge of piece measures 19.5 (20.5-23) cm = 7 5/8" (8 1/8"-9"), cut and fasten strand. Work another piece. Work a cord of approx. 120 cm = 47 1/4" with chain stitches, thread it up and down through the last row of both pieces so that it can be tied mid back.





CROCHET HAT

Materials: Safran Mouliné,
75% cotton, 25% acrylic, 50 g = approx. 120 m
100 (100) g color no 44, light beige

DROPS Crochet hook size 2.5 MM = US C/2

Crochet gauge: 20 half double crochets and 15 rows = 10 x 10 cm = 4” x 4” with hook size 2.5 MM = US C/2. Remember hook size is only a guide!

Half double crochet: Half double crochet: 1 yarn over, pick up strand through stitch below, 1 yarn over and pull strand through all loops on hook.

Treble crochet: 2 yarn overs, pick up strand through stitch below, 1 yarn over and pull strand through 2 loops, 1 yarn over and pull strand through 2 loops, 1 yarn over and pull through last loop.

Hat: Work 4 chain stitches and form them to a ring with 1 slip stitch in first chain stitch with hook size 2.5 MM = US C/2. Begin all rounds with 2 chain stitches which replace the first half double crochet and finish all rows with 1 slip stitch.
Rounds 1+2: Work 6 half double crochets around ring. Then work 2 half double crochets in each half double crochet = 12 half double crochets.
Round 3: * 2 half double crochets in first half double crochet, 1 half double crochet in next half double crochet *, repeat from *-* to end of round = 6 increases = 18 half double crochets.
Round 4: * 2 half double crochets in first half double crochet, 2 half double crochets *, repeat from *-* to end of round.
Round 5: * 2 half double crochets in first half double crochet, 3 half double crochets *, repeat from *-* to end of round.

Continue to increase 6 half double crochets on each round so that there is 1 half double crochet more between each increase each round.

When increases measure 9 (11) cm = 3 1/2" (4 3/8") from middle - (number of stitches divisible by 6) work next round with row of Holes as follows: 5 chain stitches, * skip 5 stitches, in the 6th stitch work 5 treble crochets (2 yarn overs), 1 chain stitch *, repeat from *-* finish with 4 treble crochets in the first stitch and 1 slip stitch in the 4th of the first 5 chain stitches. Then 2 rounds of half double crochets, 1 stitch in each stitch. Repeat these 3 rounds 3 times - piece measures approx. 17 (19) cm = 6 3/4" (7 1/2") from middle, but on last round of half double crochets, decrease 12 half double crochets evenly on round by skipping 1 half double crochet 12 times.
Then work brim as follows:
Round 1: 2 half double crochets in every 3rd stitch - repeat to end of round.
Rounds 2-10: 1 half double crochet in each stitch. Cut and fasten strand.
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 60-24

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (19)

country flag Monique wrote:

Het is niet duidelijk of bij het hoedje de 6 meerderingen in alle verdere toeren moeten, of alleen maar tot het begin van het gaatjespatroon!

11.04.2010 - 22:12

country flag Monique Van Den Burg wrote:

U geeft een merkwaardige beschrijving van het dubbele stokje! en de 1e toer na de gaatjes toer moet toch zijn: eenhalfstokje in ieder van de DUBBELE halfstokje van de vorige toer (en de 2e pas in het halfstokje...)? groetjes, monique

11.04.2010 - 15:01

country flag DROPS Design wrote:

You dec 1 stitch each side, i.e 2 sts on a row with dec. Do this on every row 2 times, i.e following 2 rows. Then not on every but everyother 13 (16) times - i.e another 26 (32) rows.

07.01.2009 - 23:52

country flag Lindsay wrote:

For the Bikini Bottom, could you clarify this line of directions: "Dec 1 st at each side 2 (2) times every row, then 13 (16) times every other row = 16 (18) sts" It's been a little confusing trying to figure out exactly what it's saying to do. Am I decreasing 4 sts every row and 16 sts every other row until I only have 18 sts left? I would really appreciate it! I love all your patterns and can't wait to finish this one!

07.01.2009 - 23:40

country flag byun wrote:

when you say "2 times every other row, 15 times every row, then 5 times alternately every and every other row = 3 sts" what do you mean? Thanks!

08.04.2007 - 18:53

country flag Drops Design wrote:

Det ser ut til at det mangler noe på oppskriften, vi vil legge ut en revidert. Takk for at du sier ifra. mvh Drops Design

09.03.2006 - 15:41

country flag Monica Hansen wrote:

Overdel: Forstår ikke dette m å felle "deretter 1m x18 på hver rad"!Hvor mange masker skal det være igjen etter å ha felt 1m x 2 på hver annen rad, før dette 18 tallet kommer inn i bildet??? Takknemlig for svar! (Nybegynner)

08.03.2006 - 20:22

country flag Drops design wrote:

There shouldn't be any diagramlink on this, it was a mistake. rgds

06.03.2006 - 17:50

country flag Tamara Dunn wrote:

Hello The diagram link on this page isn't showing.

03.03.2006 - 07:35