DROPS / 207 / 19

Autumn Gold by DROPS Design

Crocheted jumper in DROPS Sky and DROPS Kid-Silk. The piece is worked with a round yoke, top down and with puff-stitches on the yoke. Sizes S - XXXL.

DROPS Design: Pattern no sk-058
Yarn group B + A or C
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL - XXXL

MATERIALS:
DROPS SKY from Garnstudio (belongs to yarn group B)
300-350-350-400-450-500 g colour 17, curry
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
150-175-175-200-225-250 g colour 30, curry

CROCHET TENSION:
13 double treble crochets/double crochets in width with 1 strand of each quality = 10 cm.
Pattern A.2: 3 rows measure approx. 3.25 cm in height.

CROCHET HOOK:
DROPS CROCHET HOOK SIZE 5.5 MM.
Hook size is only a guide. If you get too many stitches on 10 cm, change to a larger hook size. If you get too few stitches on 10 cm, change to a smaller hook size.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

74% Alpaca, 18% Polyamide, 8% Wool
from 3.45 £ /50g
DROPS Sky uni colour DROPS Sky uni colour 3.45 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Sky mix DROPS Sky mix 3.45 £ /50g
Wool Warehouse Direct Ltd
Order

75% Mohair, 25% Silk
from 3.80 £ /25g
DROPS Kid-Silk uni colour DROPS Kid-Silk uni colour 3.80 £ /25g
Wool Warehouse Direct Ltd
Order
DROPS Kid-Silk long print DROPS Kid-Silk long print 3.80 £ /25g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 54.90£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

CHAIN STITCH:
If you work outermost on the hook the chain stitch will often be too tight; 1 chain stitch should be as long as 1 double crochet/treble crochet/double treble crochet is wide. 

CROCHET INFORMATION:
Each row is worked back and forth and then worked together at the end/beginning of each row as follows:
Each row of double crochets starts with 1 chain stitch (replace the first double crochet) and finishes with 1 slip stitch in the 1th chain stitch, turn the piece.
Each row of puff stitches starts with 3 chain stitches and finishes with 1 slip stitch in the 3rd chain stitch, turn the piece.
Each row of double treble crochets starts with 4 chain stitches (replace the first double treble crochet) and finishes with 1 slip stitch in the 4th chain stitch, turn the piece.


INCREASE TIP-1 (evenly spaced):
To work out how to increase evenly, count the total number of stitches on the row (e.g. 61 stitches) and divide by the number of increases to be made (e.g. 12) = 5.1. 
In this example, increase by working 2 double crochets in approx. each 5th stitch from the previous row.

PATTERN: 
See diagrams A.1 to A.5.

1 PUFF-STITCH:
Work as follows in the same stitch (important to work in the stitch not around the stitch): * Make 1 yarn over, insert the hook through the stitch, make 1 yarn over and pull it through the stitch; make both yarn overs long (to avoid the puff-stitch being small and compact it is important to pull the yarn overs to approx. 2 cm in length) *, work from *-* a total of 5 times, make a yarn over and pull the strand through all loops on the hook.

INCREASE TIP-2 (for sides of body):
Increase 1 stitch by working 2 stitches in the same stitch.
Increase on each side of the marker thread as follows:
Work until there are 4 stitches left before the marker thread, increase 1 stitch in the next stitch, work 6 stitches (marker thread sits in the middle of these 6 stitches), increase 1 stitch in the next stitch (= 2 stitches increased at each marker thread and a total of 4 stitches increased on the row).

DECREASE TIP (for each side of sleeve):
Decrease on a row of double crochets by working the 2 outermost stitches on the row together as follows: Insert the hook through the next-to-outermost stitch, make 1 yarn over and pull the yarn over through the stitch, insert the hook through the next stitch, make 1 yarn over and pull the yarn over through the stitch, make 1 more yarn over and pull it through all 3 loops on the hook (= 1 stitch decreased).

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

JUMPER – SHORT OVERVIEW OF THE PIECE:
The yoke is worked top down and back and forth (i.e. alternately from the right and wrong side) from mid back; it is worked together at the end of each row. The yoke is divided for body and sleeves and both are continued separately back and forth in the same way.

YOKE:
Work 61-63-67-69-71-73 CHAIN STITCHES – read description above, with hook size 5.5 mm and 1 strand Sky + 1 strand Kid-Silk (= 2 strands) and form them into a ring with 1 slip stitch in the first chain stitch.
The first row is worked as follows from the wrong side: Work 2 chain stitches – read CROCHET INFORMATION, 1 double crochet in each chain stitch to the end of the row = 61-63-67-69-71-73 double crochets.
Work 1 row of double crochets from the right side with 1 double crochet in each double crochet and increase at the same time 12 double crochets evenly spaced on the row – read INCREASE TIP-1 = 73-75-79-81-83-85 double crochets.
The next row is worked as follows from the wrong side:
Work A.1 over the first stitch (shows how the rows start and finish), work A.3 over 2 stitches and repeat A.2 to the end of the row (= 35-36-38-39-40-41 repeats of 2 stitches). Continue this pattern back and forth. REMEMBER THE CROCHET TENSION! AT THE SAME TIME on each row marked with an arrow in A.1, increase double crochets evenly spaced as described below – remember INCREASE TIP-1:
Arrow-1: Increase 36-36-38-40-40-42 double crochets evenly spaced = 109-111-117-121-123-127 stitches (there is now room for 53-54-57-59-60-62 repeats of A.2 in width).
Arrow-2: Increase 16-20-24-24-26-30 double crochets evenly spaced = 125-131-141-145-149-157 stitches (there is now room for 61-64-69-71-73-77 repeats of A.2 in width).
Arrow-3: Increase 16-20-24-24-26-30 double crochets evenly spaced = 141-151-165-169-175-187 stitches (there is now room for 69-74-81-83-86-92 repeats of A.2 in width).
Arrow-4: Increase 16-20-24-22-24-30 double crochets evenly spaced = 157-171-189-191-199-217 stitches (there is now room for 77-84-93-94-98-107 repeats of A.2 in width).
Continue working A.1 to A.3 up to and including the row marked for your size; i.e. sizes S-M-L are now finished. Continue in sizes XL-XXL-XXXL and increase on the last row as follows:
Arrow-5: NOTE: Do not turn on this row but work the row from the right side so the next row is from the wrong side – increase 12-24-28 double crochets evenly space = 203-223-245 stitches.
When A.1 to A.3 have been completed for your size, the piece measures approx. 14-14-14-17-17-17 cm from the cast-on edge mid front.
The next row is worked as follows from the wrong side:
Work A.4 over the first stitch (shows how the rows start and finish), repeat A.5 (= 1 stitch) to end of row. Continue this pattern; A.4 and A.5 are repeated in height to finished length. When the piece measures approx. 17-18-20-21-22-24 cm from the cast-on edge mid front – adjust so the next row is a row of double crochets (from right side), increase 4-10-12-6-14-12 double crochets evenly spaced = 161-181-201-209-237-257 stitches.
Continue working until the piece measures approx. 19-21-23-25-27-29 cm from the cast-on edge mid front – adjust so the next row is a row of double crochets.
Now divide the yoke for body and sleeves; i.e. the next row is worked as follows from the right side:
Work 1 double crochet in each of the first 24-27-29-31-35-39 stitches (= half back piece), work 6-6-6-8-8-8 loose chain stitches (= in side under sleeve), skip the next 34-38-44-44-50-52 stitches (= sleeve), work 1 double crochet in each of the next 46-52-56-60-68-76 stitches (= front piece), work 6-6-6-8-8-8 loose chain stitches (= in side under sleeve), skip the next 34-38-44-44-50-52 stitches (= sleeve) and work 1 double crochet in each of the last 23-26-28-30-34-38 stitches (= half back piece). Body and sleeves are finished separately. THE PIECE IS NOW MEASURED FROM HERE!

BODY:
= 105-117-125-137-153-169 stitches (including the 6-6-6-8-8-8 chain stitches under each sleeve). Insert 1 marker thread after the first 27-30-32-35-39-43 stitches (= half back piece) and 1 marker thread after the next 52-58-62-68-76-84 stitches (= front piece), there are 26-29-31-34-38-42 stitches left to the beginning of the row (= half back piece). Allow the marker threads to follow your work onwards; they will be used when increasing in the sides.
Continue back and forth with patterns A.4 and A.5 as before. When the body measures 8 cm from the division, increase 2 stitches in each side – read INCREASE TIP-2. Increase like this every 9 cm a total of 3 times in each side = 117-129-137-149-165-181 stitches. Continue working until the body measures 35 cm from the division but finish after a row of double crochets from the right side. Cut and fasten the strands. The jumper measures approx. 56-58-60-62-64-66 cm from the shoulder down.

SLEEVE:
The sleeve is worked back and forth (i.e. alternately from the right and wrong side) from mid under the sleeve (so the texture matches on the body and sleeve).
Start from the wrong side, in the middle of the 6-6-6-8-8-8 stitches under the sleeve and work 1 double treble crochet in each of the 3-3-3-4-4-4 stitches from the middle outwards – remember CROCHET INFORMATION, work 1 double treble crochet in each of the 34-38-44-44-50-52 stitches which were skipped and finish with 1 double treble crochet in each of the last 3-3-3-4-4-4 stitches mid under sleeve = 40-44-50-52-58-60 stitches, turn the piece.
Continue back and forth with patterns A.4 and A.5 as before. When the piece measures approx. 3 cm from the division decrease 1 stitch on each side – read DECREASE TIP. Decrease like this every 5-3-2-2-1½-1½ cm a total of 3-4-6-6-8-8 times on each side = 34-36-38-40-42-44 stitches.
When the sleeve measures 16-16-16-15-15-15 cm from the division increase 1 stitch on each side by working 2 stitches in the next-to-outermost stitch on each side. Increase like this every 9-9-8-8-6-5½ cm a total of 3-3-3-3-4-4 times on each side = 40-42-44-46-50-52 stitches. Continue working until the sleeve measures 45-44-42-41-39-38 cm from the division but finish after a row of double crochets (you can try the jumper on and continue to desired length). NOTE: Shorter measurements in larger sizes due to wider neck and longer yoke. Cut and fasten the strands. Work the other sleeve in the same way.

ASSEMBLY:
Sew the seam under the sleeve – sew in the outermost loop of the outermost stitch.

This pattern has been corrected. .

Updated online: 28.10.2019
And use:
DROPS KID-SILK from Garnstudio (belongs to yarn group A)
150-175-175-200-225-250 g colour 30, curry

Diagram

= this row has already been worked; it shows how the next row is worked in the stitches
= 1 chain stitch (equivalent to 1 double crochet) - if you work outermost on the hook the chain stitch will often be too tight; 1 chain stitch should be as long as 1 double crochet is wide.
= 1 double crochet in treble crochet/puff-stitch/double treble crochet
= 3 chain stitches (equivalent to 1 treble crochet)
= skip 1 stitch, work 1 treble crochet in the next stitch, work 1 chain stitch, work 1 PUFF-STITCH – read description in text – in the skipped stitch (the puff-stitch should cross over the treble crochet so that the treble crochet will be on the wrong side of the jumper)
= skip 1 puff-stitch + 1 chain stitch, work 1 treble crochet in the next treble crochet, work 1 chain stitch, 1 puff-stitch in the skipped chain stitch (the puff-stitch should cross over the treble crochet so that the treble crochet will be on the wrong side of the jumper)
= increase row
= 4 chain stitches (equivalent to 1 double treble crochet)
= 1 double treble crochet in stitch


Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 207-19) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (9)

Eva 27.10.2019 - 16:27:

I really like this design. I'm going to crochet it next week. But I think there should be just 125-150g Kid-Silk (size S). Is it possible?

DROPS Design 27.10.2019 kl. 17:52:

Dear Eva. You seem to be right about the amount (150 gr) We've sent your comment to the Design Department. Happy knitting!

Anna 30.07.2019 - 16:48:

Name Suggestion: Saffron Sky I love this pattern and am looking forward to making it.

Agnes 30.07.2019 - 16:43:

J'aime beaucoup ce modèle, il me fait penser à un ananas de par sa couleur et son point. Je l'appellerai donc le pull " Ananas"

Jacqueline 29.06.2019 - 13:50:

Really pretty. I can see a neutral palette with the top shoulders in a different color. Would really love to make this!

Johanna 14.06.2019 - 23:17:

Very Lovely ! I am certainly gonna crochet this one !

Koszinski 10.06.2019 - 09:28:

J adore ce modele

Ellis 09.06.2019 - 20:14:

Don't like crocheted clothing , mostly to stiff

Adiba 06.06.2019 - 16:20:

Ma couleur préférée ! Je l'appellerai potisoleil 😊

Caroline 05.06.2019 - 17:38:

Eigentijds, met een leuke mix van stoer en schattig.

Post a comment to pattern DROPS 207-19

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.