DROPS Sky
DROPS Sky
74% Alpaca, 18% Polyamide, 8% Wool
from 5.40 € /50g
Get the yarn to make this pattern from 54.00€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

After Midnight

Knitted jacket in DROPS Sky. The piece is worked top down with round yoke and Nordic pattern on the yoke. Sizes S - XXXL.

DROPS 205-26
DROPS Design: Pattern no sk-048
Yarn group B
-------------------------------------------------------

SIZES:
S - M - L - XL - XXL - XXXL

MATERIALS:
DROPS SKY from Garnstudio (belongs to yarn group B)
250-300-300-350-350-400 g colour 05, black
50-50-100-100-100-100 g colour 03, light beige
50-50-50-50-50-50 g colour 11, hazelnut
50-50-50-50-50-50 g colour 17, curry
50-50-50-50-50-50 g colour 18, dusty pink
50-50-50-50-50-50 g colour 19, brick

KNITTING TENSION:
20 stitches in width and 26 rows in height with stocking stitch and Nordic pattern = 10 x 10 cm.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 4.5 MM.
DROPS CIRCULAR NEEDLE SIZE 4.5 MM: Length 40 cm and 80 cm for stocking stitch and Nordic pattern.
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM.
DROPS CIRCULAR NEEDLE SIZE 3.5 MM: Length 80 cm for rib.
Needle size is only a guide. If you get too many stitches on 10 cm, change to a larger needle size. If you get too few stitches on 10 cm, change to a smaller needle size.

DROPS MOTHER OF PEARL BUTTONS, Arched (white) NO 522: 6-6-7-7-8-8 items.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Sky
DROPS Sky
74% Alpaca, 18% Polyamide, 8% Wool
from 5.40 € /50g
Get the yarn to make this pattern from 54.00€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

RIDGE/GARTER STITCH (worked back and forth):
Knit all rows.
1 ridge in height = Knit 2 rows.

ELEVATION (back of neck):
So the jacket is slightly higher at the back of the neck when working a round yoke, you can work an elevation as described here. Skip this section if you do not want an elevation.
Insert a marker thread in the middle stitch of the row. Start from the right side with light beige and knit 14-15-16-16-17-18 stitches past the marker thread, turn, tighten strand and purl 29-31-33-33-35-37 stitches. Turn, tighten strand and knit 43-46-49-49-52-55 stitches, turn, tighten strand and purl 57-61-65-65-69-73 stitches. Turn, tighten strand and knit 71-76-81-81-86-91 stitches, turn, tighten strand and purl 85-91-97-97-103-109 stitches. Turn, tighten the strand and knit to end of row. Then purl 1 row (bands worked in garter stitch). Then work YOKE as described in the text.

PATTERN: 
See diagram A.1. Choose diagram for your size. The whole pattern is worked in stocking stitch.

KNITTING TIP:
To avoid the knitting tension becoming tighter when working pattern it is important that the strands at the back are not tight. Use a size larger needle when working pattern if this is a problem.

INCREASE TIP (evenly spaced):
To work out how to increase evenly, count the total number of stitches on the needle (e.g. 100 stitches) minus the bands (e.g. 10 stitches) and divide the remaining stitches by the number of increases to be made (e.g. 43) = 2.1. 
In this example, increase by making 1 yarn over after approx. each 2nd stitch. Do not increase on bands. On the next row work the yarn overs twisted to avoid holes.

INCREASE TIP-2 (for sides of body and mid under sleeves):
All increases are worked from the right side!
Work until there are 3 stitches left before the marker thread, make 1 yarn over, knit 6 (marker thread sits between these 6 stitches) make 1 yarn over (= 2 stitches increased).
On the body the yarn overs are purled twisted on the next row (wrong side) to avoid holes. On the sleeves the yarn overs are knitted twisted on the next round to avoid holes. The new stitches are worked in stocking stitch. 

DECREASE TIP (for mid under sleeves): Work until there are 5 stitches left before the marker thread, knit 2 together, knit 6 (marker thread sits between these 6 stitches), slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (= 2 stitches decreased).

BUTTONHOLES:
Work buttonholes on the right band (when the garment is worn). Work from the right side when there are 3 stitches left on the row as follows: Make 1 yarn over, knit 2 together and knit 1. On the next row (wrong side), knit the yarn over to leave a hole.
The first buttonhole is worked when the rib on the neck measures approx. 1½-2 cm. Then work the other 5-5-6-6-7-7 buttonholes with approx. 9-9½-8-8½-7½-8 cm between each one.

CASTING OFF TIP:
To avoid the cast-off edge being tight you can cast off with a double strand or a larger size needle.

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

JACKET – SHORT OVERVIEW OF THE PIECE:
The neck and the yoke are worked back and forth with circular needle from mid front, top down. The yoke is divided for body and sleeves. The body is continued back and forth with circular needle from mid front. The sleeves are worked in the round with short circular needle/double pointed needles, top down.

NECK:
Cast on 100-104-108-112-116-120 stitches (including 5 band stitches on each side towards mid front) with circular needle size 3.5 mm and curry. Purl 1 row (= wrong side). Change to light beige. The next row is worked as follows from the right side: 5 band stitches in GARTER STITCH – read description above, * knit 2, purl 2 *, work from *-* until there are 7 stitches left on the row, knit 2 and finish with 5 band stitches in garter stitch. Continue this rib for 3 cm but remember the BUTTONHOLE on the right band – read description above. Purl 1 row from the wrong side where you increase 43-45-47-49-51-53 stitches evenly spaced – read INCREASE TIP-1 (bands worked in garter stitch; do not increase on bands) = 143-149-155-161-167-173 stitches. Insert 1 marker at the beginning of the row; the yoke will be measured from this marker. Change to circular needle size 4.5 mm.
Now you can work an ELEVATION in the back of the neck – read description above. If you do not want an elevation, go straight to YOKE.

YOKE:
The next row is worked as follows from the right side: 5 band stitches in garter stitch, work A.1A until there are 6 stitches left on the row (= 22-23-24-25-26-27 repeats of A.1A with 6 stitches), work A.1B (= 1 stitch) and finish with 5 band stitches in garter stitch. Continue this pattern. REMEMBER THE KNITTING TENSION!
AT THE SAME TIME on each row marked with an arrow in A.1A increase stitches evenly spaced as described below – read INCREASE TIP-1!
Arrow-1: Increase 42-48-48-54-60-60 stitches evenly spaced = 185-197-203-215-227-233 stitches (there is now room for 29-31-32-34-36-37 repeats of A.1A with 6 stitches).
Arrow-2: Increase 38-42-48-52-52-58 stitches evenly spaced = 223-239-251-267-279-291 stitches (there is now room for 53-57-60-64-67-70 repeats of A.1A with 4 stitches).
Arrow-3: Increase 28-30-36-44-50-50 stitches evenly spaced = 251-269-287-311-329-341 stitches (there is now room for 40-43-46-50-53-55 repeats of A.1A with 6 stitches).
Arrow-4: Increase 18-24-30-30-36-42 stitches evenly spaced = 269-293-317-341-365-383 stitches (there is now room for 43-47-51-55-59-62 repeats of A.1A with 6 stitches).
Arrow-5: Increase 12-18-18-24-24-36 stitches evenly spaced = 281-311-335-365-389-419 stitches (there is now room for 45-50-54-59-63-68 repeats of A.1A with 6 stitches).
When A.1 has been completed in height the piece measures 19-19-19-25-25-25 cm from the marker on the neck.
Continue with stocking stitch and black and with 5 band stitches in garter stitch on each side towards mid front, until the piece measures 19-21-23-25-27-29 cm from the marker on the neck.
Now divide the yoke for body and sleeves continuing with black on the next row as follows: Work 46-50-53-58-63-69 stitches in garter stitch and stocking stitch as before (= front piece), place the next 54-61-67-72-74-77 stitches on 1 thread for sleeve, cast on 6-6-8-8-10-10 new stitches on the needle (= in side under sleeve), work 81-89-95-105-115-127 stitches in stocking stitch (= back piece), place the next 54-61-67-72-74-77 stitches on 1 thread for sleeve, cast on 6-6-8-8-10-10 new stitches on the needle (= in side under sleeve) and work the remaining 46-50-53-58-63-69 stitches in stocking stitch and garter stitch as before (= front piece). Body and sleeves are finished separately. THE PIECE IS NOW MEASURED FROM HERE!

BODY:
= 185-201-217-237-261-285 stitches. Insert 1 marker thread 49-53-57-62-68-74 stitches in from each side (= in sides of body). There are 87-95-103-113-125-137 stitches between the marker threads on the back piece. Allow the threads to follow your work onwards; they will be used when increasing in the sides.
Work stocking stitch back and forth using black and with 5 band stitches in garter stitch on each side towards mid front – remember buttonholes on right band.
When the piece measures 5 cm from the division in all sizes, increase 1 stitch on each side of both marker threads – read INCREASE TIP-2 (= 4 stitches increased). Increase like this every 5 cm a total of 6 times on each side = 209-225-241-261-285-309 stitches.
Continue working until the piece measures 32 cm from the division in all sizes (there is approx. 2 cm left to finished length; you can try the jacket on and work to desired length). 
Change to circular needle size 3.5 mm and work 3 ridges back and forth over all stitches. Cast off with knit from the right side – read CASTING OFF TIP! The jacket measures approx. 56-58-60-62-64-66 cm from the shoulder down.

SLEEVE:
Place the 54-61-67-72-74-77 stitches from the thread on the one side of the piece on short circular needle/double pointed needles size 4.5 mm and knit up 1 stitch in each of the 6-6-8-8-10-10 stitches cast on under the sleeve = 60-67-75-80-84-87 stitches. Insert 1 marker thread in the middle of the 6-6-8-8-10-10 new stitches. Allow the thread to follow your work onwards; it will be used when decreasing and increasing mid under sleeve.
Start the round at the marker thread and work stocking stitch in the round with black. When the sleeve measures 2 cm from the division in all sizes decrease 2 stitches mid under sleeve – read DECREASE TIP. Decrease like this every 3½-2-1½-1-1-1 cm a total of 4-6-7-8-9-8 times = 52-55-61-64-66-71 stitches.
Work until the piece measures 16-16-16-13-13-12 cm from the division (shorter measurements in larger sizes due to wider neck and longer yoke). Now increase 2 stitches mid under sleeve – read INCREASE TIP-2. Increase as follows every 1 cm a total of 18-16-17-20-20-20 times = 88-87-95-104-106-111 stitches. Continue working until the sleeve measures 39-38-36-35-33-32 cm from the division. Knit 1 round where you decrease 0-0-0-0-2-0 stitches evenly spaced = 88-87-95-104-104-111 stitches. The next round is worked as follows: Knit 0-1-1-0-0-1, * knit 2 together *, work from *-* to end of round = 44-44-48-52-52-56 stitches left.
Change to double pointed needles size 3.5 mm and work rib (= knit 2 / purl 2) for 6 cm. Cast off with knit over knit and purl over purl – remember CASTING OFF TIP. The sleeve measures approx. 46-45-43-42-40-39 cm from the division. Work the other sleeve in the same way.

ASSEMBLY:
Sew buttons onto left band.

Diagram

symbols = light beige
symbols = brick
symbols = black
symbols = curry
symbols = dusty pink
symbols = hazelnut
symbols = increase row
diagram
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 205-26

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (8)

country flag Tina Östin wrote:

After midnight kofta: framkanten, stickas den i svart först när mönstret är färdigstickat? I vitt mönstergården?

09.12.2022 - 09:35

DROPS Design answered:

Hei Tine. Litt usikker på hva du mener med " I vitt mönstergården?", men når diagram A.1 er ferdig strikket, strikkes det videre med fargen sort. Slik står det under FRAM- OCH BAKSTYCKE: ..... Sticka slätstickning fram och tillbaka med svart och 5 framkantsmaskor i rätstickning i varje sida mot mitt fram – kom ihåg knapphål på höger framkant. mvh DROPS Design

12.12.2022 - 12:59

country flag Sara wrote:

Hi, what cast-on method would you suggest for this?

03.06.2022 - 15:41

DROPS Design answered:

Dear Sara, we usually use the continental method - see this video. But feel free to use your favorite cast on edge, just make sure your cast-on edge is not too tight - Happy knitting!

03.06.2022 - 16:09

country flag Josie wrote:

Bonjour, j'ai reçu ma laine Sky pour réaliser le cardigan 205-26. Lorsque j'ai regardé la photo des modèles Sky, c'était écrit 23m, j C'était parfait pour mon échantillon. Mais pour les explications de ce modèle, l'échantillon est de 20m. Qu'est ce que je ne comprends pas svp ? Merci et bonne journée.

26.01.2022 - 10:12

DROPS Design answered:

Bonjour Josie, le nombre de mailles varie en fonction de l'effet et de la texture souhaitée, par ex. 23 m pour un bonnet, mais l'échantillon de "base" est de 21 mailles pour 10 cm (cf nuancier), on va tricoter ici un peu plus souplement avec 20 mailles pour 10 cm. Pensez à bien adapter la taille des aiguilles si besoin pour que votre échantillon corresponde. Bon tricot!

26.01.2022 - 13:11

country flag Rosemarie Olivebring wrote:

Stickar jag framstycke, 8 nya uppläggningsmaskor bakstycke 8 uppläggningsmaskor plus framstycke i ett enda stycke?

17.01.2022 - 19:19

DROPS Design answered:

Hei Rosemarie. Om du mener når du skal dele bærestykket til bol og ermer, strikkes dette i et stykke. Maskene du setter på tråder, strikkes når bolen er ferdig. mvh DROPS Design

18.01.2022 - 12:52

country flag Rosemarie Olivebring wrote:

Jag undrar på diagrammet för XXL vid pil 2 och 3 är det bara 4 maskor. 2 av maskorna har tagits bort.?

08.01.2022 - 20:03

country flag April Anderson wrote:

The picture of the woman wearing the sweater shows a sweater that is not a cardigan! She is wearing a pullover. Is this pattern for a cardigan or a pullover?

21.11.2019 - 21:18

DROPS Design answered:

Dear Mrs Anderson, you will find the After Midnight jacket/cardigan pattern here and the After Midnight Sweater pattern here. Happy knitting!

22.11.2019 - 08:54

country flag Anne wrote:

Wunderschön! Auch die Farbzusammenstellung gefällt mir. Und ich finde die Ärmel klasse, machen die Jacke peppig.

24.09.2019 - 21:57

country flag Kirsten wrote:

Schönes Modell, außer die Ärmel, sie sind ja total ausgebeult.

13.07.2019 - 12:19