DROPS Karisma
DROPS Karisma
100% Wool
from 3.00 $ /50g
Get the yarn to make this pattern from 12.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 204-19
DROPS design: Pattern u-883
Yarn group B
----------------------------------------------------------

FOR THE ENTIRE SET:

SIZE:
S/M - M/L
Head circumference: Approx. 54/56 - 56/58 cm = 21 1/4”/22” – 22”/22 3/4”

MATERIALS:
DROPS KARISMA from Garnstudio (belongs to yarn group B)
150-150 g color 48, wine red
50-100 g color 01, off white

HAT:

SIZE:
S/M - M/L
Head circumference: Approx. 54/56 - 56/58 cm = 21 1/4”/22” – 22”/22 3/4”

MATERIALS:
DROPS KARISMA from Garnstudio (belongs to yarn group B)
100-100 g color 48, wine red
50-50 g color 01, off white

KNITTING GAUGE:
22 stitches in width and 30 rows vertically in stockinette stitch and Nordic pattern = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 mm = US 4
DROPS CIRCULAR NEEDLE SIZE 3.5 mm = US 4: Length 40 cm = 16” for stockinette stitch and Nordic pattern.
DROPS CIRCULAR NEEDLE SIZE 3 mm = US 2,5: Length 40 cm = 16” for rib.
Needle size is only a suggestion! If you have too many stitches on 10 cm = 4” switch to larger needles. If you have too few stitches on 10 cm = 4” switch to smaller needles.

MITTENS:

SIZE:
S/M - M/L
Length: approx. 24-26 cm = 9 1/2”-10 1/4” Circumference: approx. 21-21 cm = 8 1/4”-8 1/4”

MATERIALS:
DROPS KARISMA from Garnstudio (belongs to yarn group B)
100-100 g color 48, wine red
50-50 g color 01, off white

KNITTING GAUGE:
23 stitches in width and 32 rows vertically in stockinette stitch and Nordic pattern = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 3 mm = US 2,5
Needle size is only a suggestion! If you have too many stitches on 10 cm = 4” switch to larger needles. If you have too few stitches on 10 cm = 4” switch to smaller needles.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Karisma
DROPS Karisma
100% Wool
from 3.00 $ /50g
Get the yarn to make this pattern from 12.00$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
----------------------------------------------------------

EXPLANATION FOR THE PATTERN:

----------------------------------------------------------

PATTERN:
Hat: See diagram A.1.
Mittens: See diagrams A.1 and A.2.
Work the entire pattern in stockinette stitch.

DECREASE TIP-1 (applies to top of hat):
Work until 2 stitches remain before marker, knit these 2 stitches together (= 1 stitch decreased).

DECREASE TIP-2 (applies to top of mittens):
Begin 3 stitches before marker thread, knit 2 together, knit 2 (marker thread is between these 2 stitches), slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked (= 2 stitches decreased at marker thread).

DECREASE TIP-3 (applies to thumbs):
Begin 2 stitches before marker thread, knit 2 together, marker thread, slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked (= 2 stitches decreased).

KNITTING TIP-1:
To avoid the knitting gauge to tighten when working pattern, it is important not to tighten the strands on back side of piece. Use a larger needle size when working pattern if needed.

KNITTING TIP-2 (applies to mittens):
If you want a mitten with a larger circumference the mittens can be worked on half a size or one size larger needle. Half a needle size larger will be 1 cm = 3/8” more in circumference and a one needle size larger will be 2 cm = 3/4” more in circumference.


KNITTING TIP-3 (applies to mittens):
Length before thumb opening begins can be adjusted by working more or less rounds before working marking for thumb opening.

----------------------------------------------------------

START THE PIECE HERE:

----------------------------------------------------------

HAT - SHORT OVERVIEW OF THE PIECE:
Worked in the round on a short circular needle, bottom up. Switch to double pointed needles when needed.

HAT:
Cast on 108-112 stitches on a short circular needle size 3 mm = US 2,5 with wine red. Knit 1 round. Then work rib in the round (= knit 2/purl 2) for 4 cm = 1 1/2”. Switch to a short circular needle size 3.5 mm = US 4. Read KNITTING TIP-1 and work A.1 in the round (= 27-28 repetitions of 4 stitches). REMEMBER THE KNITTING GAUGE!
Work until piece measures approx. 20 cm = 8” in both sizes but adjust so that next round is a unicolored round straight before or after a round with dots.
Insert 6-7 markers in piece 18-16 stitches between every marker. On next round decrease 1 stitch before every marker - read DECREASE TIP-1= 6-7 stitches decreased. Decrease like this every other round 4-6 times in total and then every round 5-4 times in total = 54-42 stitches remain. Knit 3 rounds in stockinette stitch with the color of the last stripe where all stitches are knitted together 2 by 2 on all three rounds = 7-6 stitches remain. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. Piece measures approx. 25-26 cm = 9 3/4”-10 1/4” from top and down.

ASSEMBLY:
Make a pompom with wine red and off white with an approx. diameter of 6 cm = 2 3/8” and fasten it at the top of the hat.

----------------------------------------------------------

MITTENS - SHORT OVERVIEW OF THE PIECE:
Work piece in the round on double pointed needles, bottom up. Mittens have the same circumference in both sizes but different length. Circumference can be adjusted - read KNITTING TIP-2!

LEFT MITTEN:
Cast on 48-48 stitches on double pointed needles size 3 mm = US 2,5 with wine red. Work 8 rounds in stockinette stitch for folding edge.
Purl 1 round (= folding edge). Measure piece from folding edge!
Work 8 rounds in stockinette stitch with wine red. REMEMBER THE KNITTING GAUGE!
Read KNITTING TIP-1 and work A.1 in the round (= 12 repetitions of 4 stitches). Repeat A.1 vertically.
When piece measures approx. 11 cm = 4 3/8” from folding edge (adjust so that next round is a unicolored round with wine red), work a marking for thumb opening as follows - read KNITTING TIP-3: Work 14 stitches in stockinette stitch with wine red, work 8 stitches in stockinette stitch for thumb opening in a different color that stands out from the rest of piece, then work the remaining 26 stitches in stockinette stitch with wine red. Continue pattern as before over all stitches until mitten measures approx. 21-23 cm = 8 1/4”-9” from folding edge. Approx. 3 cm = 1 1/8” remain until finished measurements, try the mitten on and work until desired length - NOTE: Finish after a whole stripe with off white and work with wine red (without dots) until correct measurements.
Insert 1 marker thread at beginning of round and 1 marker thread after 24 stitches.
Work in stockinette stitch in the round with wine red. AT THE SAME TIME on first round decrease on each side of the 2 marker threads - read DECREASE TIP-2 (= 4 stitches decreased).
Decrease like this on every round 11 times in total in both sizes = 4 stitches remain. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. Mitten measures approx. 24-26 cm = 9 1/2”-10 1/4” from top and down to folding edge.

THUMB:
Pull out the thread that was worked over the 8 stitches for thumb opening. Pick up 8 stitches on each side of thumb opening with wine red = 16 stitches. Distribute these 16 stitches on double pointed needles size 3 mm = US 2,5. Work in stockinette stitch in the round with wine red.
When thumb measures approx. 5 -5½ cm = 2”-2 1/8”, insert 1 marker thread in each side of thumb. Approx. 1 cm = 3/8” remains until finished measurements on thumb, try the mitten on and work until desired length.
On next round decrease on each side of both marker threads – read DECREASE TIP-3 (= 4 stitches decreased). Decrease like this every round 3 times in total = 4 stitches remain. Cut the yarn and pull it through the remaining stitches, tighten together and fasten. Thumb measures approx. 6 -6½ cm = 2 3/8”-2 1/2” from top and down.

RIGHT MITTEN:
Cast on 48-48 stitches on double pointed needles size 3 mm = US 2,5 with wine red. Work 8 rounds in stockinette stitch for folding edge.
Purl 1 round (= folding edge). Work 8 rounds in stockinette stitch with wine red.
Remember KNITTING TIP-1 and work A.2 in the round (= 12 repetitions of 4 stitches). Repeat A.2 vertically.
When piece measures approx. 11 cm = 4 3/8” from folding edge (adjust length according to left mitten), work a marking for thumb opening as follows: Work 26 stitches in stockinette stitch with wine red, work 8 stitches in stockinette stitch for thumb opening in a different color, then work the remaining 14 stitches in stockinette stitch with wine red. Continue pattern as before over all stitches until mitten measures approx. 21-23 cm = 8 1/4”-9” from folding edge (adjust length according to left mitten).
Insert 1 marker thread at beginning of round and 1 marker thread after 24 stitches.
Work in stockinette stitch in the round with wine red. AT THE SAME TIME on first round decrease on each side of the 2 marker threads - read DECREASE TIP-2 (= 4 stitches decreased). Decrease like this on every round 11 times in total in both sizes = 4 stitches remain on needles. Cut the yarn and pull it through the remaining stitches, tighten together and fasten.

THUMB:
Work thumb the same way as on left mitten.

ASSEMBLY:
Fold the folding edge towards wrong side, and fasten with neat stitches.

Diagram

All measurements in charts are in cm.

symbols = wine red
symbols = off white
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 204-19

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (6)

country flag Katarina Lans wrote:

I mönstret 204-19, så är det lite oklart hur man minskar på toppen av vantarna. Jag förstår ingenting! Går det att tydliggöra? T.ex. att man ska minska 3 maskor innnan markören, men det blir bara förvirrande när man ska kombinera beskrivningen och minskningstips 2. Vore enklare att läsa vad man ska göra sticka för sticka.

22.01.2024 - 20:44

DROPS Design answered:

Hej Katarina. När du ska börja minska och har satt de 2 markörerna i arbetet så minskar du vid varje markör på följande sätt: Börja 3 maskor före markören, sticka 2 maskor räta tillsammans, sticka 2 rätmaskor (markören sitter mellan dessa 2 maskorna), lyft 1 maska som om den skulle stickas rät, sticka 1 rätmaska, drag den lyfta maskan över maskan som stickades (= 2 maskor minskade vid markören). Detta gör du vid varje markör och varje varv tills du har 4 maskor kvar. Då klipper du av tråden, drar den genom de sista 4 maskorna, drar åt och fäster tråden. Mvh DROPS Design

24.01.2024 - 15:05

country flag Valerie wrote:

Bonjour Lorsque je commence les diminutions le dessin est décalé, dois je ajuster ou continuer selon le schéma ? Merci par avance pour votre aidaient cordialement Valerie

19.10.2023 - 18:51

DROPS Design answered:

Bonjour Valérie, au choix, vous pouvez simplement continuer en suivant le diagramme ou bien ajuster le motif pour que les plumetis soient toujours alignés. Bon tricot!

20.10.2023 - 08:08

country flag Marian wrote:

When decreasing I find that the pattern is not staying as it should because there are less stitches. Is this correct, if not, how do I adjust? Thank you.

04.09.2023 - 15:33

DROPS Design answered:

Dear Marian, continue working the pattern as before over as many stitches as possible - depending on the decrease rounds you might have some difference at the transition of rounds. Happy knitting!

05.09.2023 - 11:43

country flag Nini Nielsen wrote:

Jeg mener at det er et dårligt design. vanten er alt for vid i den lille størrelse. desuden er karisma ikke egnet til p.3

27.02.2021 - 22:20

country flag Jane wrote:

Not to worry I finally found the answer: MITTENS - SHORT OVERVIEW OF THE PIECE: Work piece in the round on double pointed needles, bottom up. Mittens have the same circumference in both sizes but different length. Circumference can be adjusted - read KNITTING TIP-2!

15.11.2019 - 14:33

country flag Jane wrote:

The mitten pattern says it is for 2 sizes -s/m and m/l. As far as I can see you cast on 48 stitches for both sizes. I can’t see where you do increases, or make adjustments, to make the larger size, so the pattern is just for one size? How many extra stitches do I cast on for the m/l size? Thank you

15.11.2019 - 14:11

DROPS Design answered:

Dear Jane, mittens have the same circumference in both size (only length is different) - to adust circumference see KNITTING TIP-2. Happy knitting!

15.11.2019 - 14:42