DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 4.55 $ /50g
Get the yarn to make this pattern from 31.85$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Cable Snooze

Knitted bag for babies in DROPS Merino Extra Fine. The piece is worked with lace pattern, double moss stitch and hood. Sizes premature – 2 years.

DROPS Baby 33-7
DROPS Design: Pattern no me-066-by
Yarn group B
-------------------------------------------------------

Sizes: (<0) 0/1 - 1/3 - 6/9 - 12/18 months (2) years
Sizes equivalent to approx. height of child in cm:
(40/44) 48/52 - 56/62 - 68/74 - 80/86 (92)
Sizes equivalent to approx. height of child in feet:
(1ft4/1ft5) 1ft7/1ft8 – 1ft10/2ft – 2ft2/2ft5 – 2ft7/2ft9 (3ft)

Finished measurements:
Chest measurements: (44) 52-62-68-72 (76) cm = (17 1/4") 20 1/2"-24 3/8"-26 3/4" (30")
Full length: (40) 48-56-66-76 (86) cm = (16 3/4") 19"-22"-26"-30" (33 7/8")

All measurements in charts are in cm.

Materials:
DROPS MERINO EXTRA FINE from Garnstudio (belongs to yarn group B)
(350) 400-450-500-600 (650) g color 15, light grey green

-------------------------------------------------------
ACCESSORIES FOR THE PIECE:

KNITTING GAUGE:
21 stitches in width and 28 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.
1 repeat of A.4/A.5 (18 stitches) measures approx. 7 cm = 2 3/4” in width.
1 repeat of A.6 (32 stitches) measures approx. 12 cm = 4 3/4” in width.

NEEDLES:
DROPS CIRCULAR NEEDLE SIZE 4 MM = US 6: length 80 cm = 32”.
The needle size is only a guide. If you have too many stitches on 10 cm = 4”, change to a larger needle size. If you have too few stitches on 10 cm = 4”, change to a smaller needle size.

DROPS WOOD BUTTONS, Oak NO 503: (8) 9-10-11-12 (12) items.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 4.55 $ /50g
Get the yarn to make this pattern from 31.85$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------

EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

RIDGE/GARTER STITCH (worked back and forth):
1 ridge = Knit 2 rows.

PATTERN:
Sizes (<0) 0/1 month: See diagrams A.1, A.3, A.4 and A.5.
Sizes 1/3 - 6/9 - 12/18 months (2) years: See diagrams A.2, A.3 and A.6.
The diagrams show all the rows in the pattern seen from the right side.

BUTTONHOLE-1 (for bottom of bag):
1 BUTTONHOLE = knit 2 together, make 1 yarn over. On the next round knit the yarn over to leave a hole. The other (4) 4-4-5-5 (5) buttonholes are worked evenly spaced with approx. (4½) 5-6-5½-6 (6) cm = (1 3/4”) 2”-2 3/8”-2 1/8”-2 3/8” 2 3/8” between each.

BUTTONHOLE-2 (for band mid front):
Work buttonholes on the right band working from the right side. 1 BUTTONHOLE = knit together the 3rd and 4th stitch from the edge, make 1 yarn over. On the next row (wrong side) knit the yarn over to leave a hole.
Work buttonholes when the band measures (measured from the marker):
(<0) months: 2, 8, 14 and 20 cm = 3/4”, 3 1/8”, 5 1/2” and 8”
0/1 month: 2, 8, 14, 20 and 26 cm = 3/4”, 3 1/8”, 5 1/2”, 8” and 10 1/4”
1/3 months: 2, 7, 13, 18, 24 and 29 cm = 3/4”, 2 3/4”, 5 1/8”, 7”, 9 1/2” and 11 3/8”
6/9 months: 2, 9, 16, 23, 29 and 35 cm = 3/4”, 3 1/2”, 6 1/4”, 9”, 11 3/8” and 13 3/4”
12/18 months: 2, 8, 14, 20, 26, 32 and 38 cm = 3/4”, 3 1/8”, 5 1/2”, 8”, 10 1/4”, 12 1/2” and 15”
(2) years: 2, 8, 15, 21, 28, 34 and 41 cm = 3/4”, 3 1/8”, 6”, 8 1/4”, 11”, 13 3/8” and 16 1/8”

-------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

BAG - SHORT OVERVIEW OF THE PIECE:
The piece is worked back and forth with circular needle in 2 parts. You cast on stitches in each side for the sleeves. The piece is sewn together on the shoulders/mid top of sleeves and under sleeves. You work a hood to finish.

FRONT PIECE:
Cast on (48) 56-68-74-78 (82) stitches (including 1 edge stitch in each side) with circular needle size 4 mm = US 6 and Merino Extra Fine. Work GARTER STITCH – read description above. When the piece measures (2) 2-2-2½-2½ (2½) cm= (3/4”) 3/4”-3/4”-1”-1” (1”) work (4) 4-4-5-5 (5) buttonholes evenly spaced – read BUTTONHOLE-1. Continue with garter stitch until the piece measures (4) 4-4-5-5 (5) cm = (1 1/2”) 1 1/2”-1 1/2”-2”-2” (2”). The next row is worked as follows from the right side:

SIZES (<0) 0/1 MONTH: 1 edge stitch in garter stitch, purl (2) 6 stitches, A.1 (= 14 stitches which increase to 18 stitches), purl (14) 14 stitches, A.1 (= 14 stitches which increase to 18 stitches), purl (2) 6 stitches and finish with 1 edge stitch in garter stitch = (56) 64 stitches on the row. Purl 1 row from the wrong side (edge stitches worked in garter stitch).
The next row is worked as follows from the right side: 1 edge stitch in garter stitch, A.3 over the first (2) 6 stitches, A.4 (= 18 stitches), purl (14) 14 stitches, A.5 (= 18 stitches), A.3 over the next (2) 6 stitches and finish with 1 edge stitch in garter stitch. Then work as described under ALL SIZES!

SIZES 1/3 - 6/9 - 12/18 MONTHS (2) YEARS: 1 edge stitch in garter stitch, purl 0-2-4 (6) stitches, work A.2 (= 26 stitches which increase to 32 stitches), purl 14-16-16 (16) stitches, A.2 (= 26 stitches which increase to 32 stitches), purl 0-2-4 (6) stitches and finish with 1 edge stitch in garter stitch = 80-86-90 (94) stitches.
Purl 1 row from the wrong side (edge stitches worked in garter stitch).
The next row is worked as follows from the right side: 1 edge stitch in garter stitch, work A.3 over the first 0-2-4 (6) stitches, A.6 (= 32 stitches), purl 14-16-16 (16) stitches, A.6 (= 32 stitches), A.3 over the next 0-2-4 (6) stitches and finish with 1 edge stitch in garter stitch. Then work as described under ALL SIZES!

ALL SIZES:
Continue this pattern. REMEMBER THE KNITTING GAUGE! When the piece measures (16) 18-22-26-32 (38) cm = (6 1/4”) 7”-8 3/4”-10 1/4”-12 1/2” (15”) – adjust so that the next row is worked from the right side, divide the piece mid front and each side is finished separately.
Cut the strand. Place the first (25) 29-37-40-42 (44) stitches, seen from the right side, on 1 thread (= left front piece). There are now (31) 35-43-46-48 (50) stitches left on needle for right front piece.

RIGHT FRONT PIECE:
= (31) 35-43-46-48 (50) stitches. Insert 1 marker in the piece - will be used to measure the positions of the buttonholes. Start from the right side and continue pattern as before, but the outermost 6 stitches towards mid front are worked in garter stitch (= band). Work buttonholes on the right band – read BUTTONHOLE-2.
AT THE SAME TIME when the piece measures (30) 37-45-54-63 (72) cm = (11 3/4”) 14 1/2”-17 3/4”-21 1/4”-24 3/4” (28 3/8”) from the cast-on edge cast on stitches for the sleeve at the end of each row from the right side (i.e. towards the side) as follows: Cast on (4) 6-6-7-9 (12) stitches a total of 3 times and then (14) 15-16-17-18 (18) stitches 1 time = (57) 68-77-84-93 (104) stitches on the needle (the new stitches are worked into A.3 as you go). When all stitches are cast on continue with pattern as before, but the outermost 12 stitches on the sleeve are worked in garter stitch (= turn-up).
Continue working until the piece measures (37) 45-52-62-71 (81) cm = (14 1/2”) 17 3/4”-20 1/2”-24 3/8”-28” (32”). You should now have worked approx. 1 cm = 3/8” after the last buttonhole on the band, but adjust so that the next row is worked from the right side.
On the next row (right side) place the outermost (7) 8-9-10-10 (11) stitches towards mid front on 1 thread for neck, but to avoid having to cut the strand, work the stitches before placing them on the thread. Continue the pattern as before. Then bind off for the neck at the beginning of each row from the neck as follows: Bind off 2 stitches 1 time and then 1 stitch (2) 2-2-2-3 (3) times = (46) 56-64-70-78 (88) stitches left on needle for shoulder/sleeve. Continue the pattern as before until the piece measures (39) 47-55-65-75 (85) cm = (15 1/4”) 18 1/2”-21 5/8”-25 1/2”-29 1/2” (33 1/2”), but adjust so that the next row is worked from the right side. Knit 1 row from the right side and at the same time decrease (4) 4-6-6-6-6 (6) stitches evenly over A.5/A.6 = (42) 52-58-64-72 (82) stitches on the row. Knit 1 row from the wrong side. Bind off with knit from the right side, but make sure that the bind-off edge is not tight. The piece measures approx. (40) 48-56-66-76 (86) cm = (15 3/4”) 19”-22”-26”-30” (33 7/8”) from the cast-on edge. Work the left front piece as described below.

LEFT FRONT PIECE:
Place the (25) 29-37-40-42 (44) stitches from the strand back on the circular needle. Start from the right side and continue pattern as before. AT THE SAME TIME, at the end of the first row, knit up 6 new stitches behind the right band, i.e. knit up 1 stitch in each of the 6 band stitches = (31) 35-43-46-48 (50) stitches on needle. Continue pattern as before, but the outermost 6 stitches towards mid front are worked in garter stitch (= band – NOTE: do not work buttonholes on left band).
AT THE SAME TIME when the piece measures (30) 37-45-54-63 (72) cm = (11 3/4”) 14 1/2”-17 3/4”-21 1/4”-24 3/4” (28 3/8”) cast on new stitches for the sleeve at the end of each row from the wrong side (i.e. towards the side) as follows: Cast on (4) 6-6-7-9 (12) stitches a total of 3 times and then (14) 15-16-17-18 (18) stitches 1 time = (57) 68-77-84-93 (104) stitches on the needle (the new stitches are worked into A.3 as you go). When all stitches are cast on continue pattern as before, but the outermost 12 stitches on the sleeve are worked in garter stitch = turn up).
Continue until the piece measures approx. (37) 45-52-62-71 (81) cm = (14 1/2”) 17 3/4”-20 1/2”-24 3/8”-28” (32”) - adjust to match the right front piece and so that the next row is worked from the wrong side.
On the next row (wrong side) place the outermost (7) 8-9-10-10 (11) stitches towards mid front on a thread for the neck, but to avoid having to cut the strand, work the stitches before placing them on the thread. Continue the pattern as before. Then bind off for the neck at the beginning of each row from the neck as follows: Bind off 2 stitches 1 time and then 1 stitch (2) 2-2-2-3 (3) times = (46) 56-64-70-78 (88) stitches left on shoulder/sleeve. Continue pattern as before until the piece measures (39) 47-55-65-75 (85) cm = (15 1/4”) 18 1/2”-21 5/8”-25 1/2”-29 1/2” (33 1/2”), but adjust so that the next row is from the right side. Knit 1 row from the right side and decrease at the same time (4) 4-6-6-6 (6) stitches evenly over A.4 = (42) 52-58-64-72 (82) stitches on needle. Knit 1 row from the wrong side. Bind off with knit from the right side, but make sure that the bind-off edge is not tight. The piece measures approx. (40) 48-56-66-76 (86) cm = (15 3/4”) 19”-22”-26”-30” (33 7/8”). Work the back piece as described below.

BACK PIECE:
Cast on (48) 56-68-74-78 (82) stitches and work garter stitch for (4) 4-4-5-5 (5) cm = (1 1/2”) 1 1/2”-1 1/2”-2”-2” (2”). Work 2 rows stockinette stitch with 1 edge stitch in garter stitch in each side. The next row is worked as follows from the right side: 1 edge stitch in garter stitch, work A.3 until there is 1 stitch left on the row and finish with 1 edge stitch in garter stitch. Continue this pattern. When the piece measures (30) 37-45-54-63 (72) cm (12 1/4”) 14 1/2”-17 3/4”-21 1/4”-23 3/4” (28 3/(“) cast on new stitches for the sleeves at the end of each row on each side as follows: Cast on (4) 6-6-7-9 (12) stitches a total of 3 times on each side and then (14) 15-16-17-18 (18) stitches 1 time on each side = (100) 122-136-150-168 (190) stitches on the row (the new stitches are worked into A.3 as you go). When all stitches are cast on continue with A.3 as before, but the outermost 12 stitches on both sleeves are worked in garter stitch (= turn up).
When the piece measures (38) 46-54-64-74 (84) cm = (15”) 18”-21 1/4”-25 1/4”-29 1/8” (33”) bind off the middle (12) 14-16-18-20 (22) stitches for neck. Then bind off 2 stitches on the next row from the neck = (42) 52-58-64-72 (82) stitches left on needle for shoulder/sleeve. Continue pattern as before until there is 1 cm = 3/8” left before the piece measures (40) 48-56-66-76 (86) cm = (15 3/4”) 19”-22”-26”-30” (33 7/8”), but adjust so that the next row is worked from the right side. Knit 1 row from the right side and knit 1 row from the wrong side. Bind off with knit from the right side, but make sure that the bind-off edge is not tight. Work the other shoulder in the same way.

ASSEMBLY:
Sew shoulder/top of sleeve seams inside the bind-off edge. Sew under-sleeve seams and side seams inside the 1 edge stitch. Turn up the bottom 3 cm = 1 1/8” on each sleeve and fasten with a couple of small stitches on each side. Sew buttons onto bottom of bag (the buttons are sewn along the middle of the garter stitch edge on the back piece but on the wrong side so that they are buttoned through the buttonholes on the front piece). Sew the remaining buttons to the left band.

HOOD:
Knit up from the right side approx. 52 to 72 stitches around the neck (including the stitches from the threads in front) with circular needle size 4 mm = US 6 and Merino Extra Fine. Knit 1 row from the wrong side. Then knit 1 row from the right side, where you increase evenly on row until you have a total of (68) 76-84-88-92 (96) stitches. Work A.3 back and forth over all stitches - AT THE SAME TIME cast on 6 new stitches at the end of the next 2 rows for the folding edge = (80) 88-96-100-104 (108) stitches. Continue with A.3 over all stitches until the hood measures approx. (18) 19-20-21-22 (23) cm = (7”) 7 1/2”-8”-8 1/4”-8 3/4” (9”). Knit 1 row from the right side and knit 1 row from the wrong side. Bind off with knit from the right side. Fold the hood double and sew together at the top, inside the bind-off edge. Fold the 6 outermost stitches on each side to the right side and sew down to the neck with small, neat stitches.

This pattern has been corrected.

Updated online: 19.11.2018
Correction: piece is purled mid-front, between cable pattern on front piece.
Updated online: 26.09.2019
Correction: RIGHT & LEFT FRONT PIECE: .... Knit 1 row from the right side and at the same time decrease (4) 4-6-6-6 (6) stitches evenly over A.5/A.6 = (42) 52-58-64-72 (82) stitches on the row. Knit 1 row from the right side and decrease at the same time (4) 4-6-6-6 (6) stitches evenly over A.4/A.6 = (42) 52-58-64-72 (82) stitches on needle.

Diagram

All measurements in charts are in cm.

symbols = knit from right side, purl from wrong side
symbols = purl from right side, knit from wrong side
symbols = between 2 stitches make 1 yarn over; on the next round purl the yarn over to leave a hole
symbols = between 2 stitches make 1 yarn over; on the next round purl the yarn over twisted to avoid a hole
symbols = knit 2 together
symbols = slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch
diagram
diagram
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Baby 33-7

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (137)

country flag Sandra wrote:

Hallo, beim Vorderteil wird in der Hinreihe ja zwischen den beiden Zopfmustern A6 16 Maschen links gestrickt. Wie werden diese 16 Maschen dann in der Rückreihe gestrickt, rechts oder links? Danke.

21.09.2020 - 22:35

DROPS Design answered:

Liebe Sandra, diese Maschen werden glatt links gestrickt, dh links bei den Hinreihen und rechts bei den Rückreihen. Viel Spaß beim stricken!

22.09.2020 - 11:25

country flag Wendy Rawluk wrote:

Please assist me in understanding Baby 33-7 pattern for the assembly of the hood. I've tried many different ways which seem bulky for a newborn size 0/1 that I have knit. Please send video of assembly so I have better understanding. This is a present for my grandchild. Thank you.

30.08.2020 - 19:00

DROPS Design answered:

Dear Mrs Rawluk, this video shows the technique used for the hood in this pattern (except that the stitches are here worked following diagram). If you have any doubt, bring your work to your yarn store or send them a picture, they will be able to assist you. Happy knitting!

31.08.2020 - 09:56

country flag Wendy Rawluk wrote:

I’m knitting size 0/1 and am just finishing the hood. Is the hood to be folded in half and sewn across cast off edge? Just confirming as when I test out the look - it doesn’t seem quite right. Thank you

30.08.2020 - 01:47

DROPS Design answered:

Dear Mrs Rawluk, yes correct, that's the way the hood will be worked. Happy knitting!

31.08.2020 - 09:42

country flag Satu Haaranen-Vepsäläinen wrote:

Miten silmukat riittävät ohjeen 80s kun niitä ei lisätä missään vaiheessa 12s enempää. Teen kokoa 1/3kk ja luodessaniitä on 58s.

15.08.2020 - 13:06

DROPS Design answered:

Hej, työn alussa luodaan kyseisessä koossa 68 silmukkaa, joten silmukkaluku on oikea.

10.09.2020 - 17:39

country flag Satu wrote:

Miten silmukat riittävät ohjeen 80s kun niitä ei lisätä missään vaiheessa 12s enempää. Aloituksessa niitä on vain 58s.(koko 1/3kk) Mitä minulta jää huomaamatta?

15.08.2020 - 13:04

country flag Mette Brottmann Hansen wrote:

Hej Drops Jeg mangle mønster A.3 ifølge opskriften, skal jeg bare udvide A.4 - A.5 med lidt ekstra masker? mvh Mette

09.08.2020 - 20:32

country flag Véro wrote:

Bonjour en haut du devant,on tricote en jersey envers sur les deux derniers rangs?les manches sont elles continuées en point de blé? Merci de votre réponse . Cordialement.

15.07.2020 - 20:46

DROPS Design answered:

Bonjour Véro, quand l'ouvrage mesure (39) 47-55-65-75 (85) cm, vous tricotez toutes les mailles à l'endroit sur l'endroit en diminuant à intervalles réguliers au-dessus des diagrammes, tournez, tricotez toutes les mailles à l'endroit, tournez et rabattez toutes les mailles à l'endroit (vous avez maintenant 1 côte mousse en haut de l'épaule/de la manche). Bon tricot!

16.07.2020 - 09:52

country flag Bernice Howie wrote:

Wish the pattern was printed in words row by row. Not one for following diagrams!

12.07.2020 - 20:18

DROPS Design answered:

Dear Mrs Howie, there are only diagrams to this pattern, but you will find how to read diagrams here. Happy knitting!

13.07.2020 - 09:29

country flag Martine wrote:

Bonjour ce modèle est magnifique mais doit-il impérativement êre tricoté avec une aiguille circulaire ? j'ai du mal avec ce genre d'aiguille :(

09.07.2020 - 09:17

DROPS Design answered:

Bonjour Martine, ce modèle se tricote en allers et retours, on utilise ici une aiguille circulaire pour avoir suffisamment de place pour toutes les mailles. Découvrez ici comment adapter un modèle sur aiguilles droites. Bon tricot!

09.07.2020 - 09:46

country flag Susanne wrote:

Hallo ihr lieben, ich bin am Rückenteil angelangt und fesge mich wie ich die 16 Maschen für den halsausschnitt abkette. Teile ich die arbeitnin zwei und arbeite wie die vorderseite ab oder kette ich die einfach ab und stricke ganz normal weiter. Ist der halsausschnitt hinten dann mit grade ecken ? Was mach ich dann mit den maschen der anderen Schulter solange ? Ganz liebe Grüße!

16.05.2020 - 19:57

DROPS Design answered:

Liebe Susanne, bei 54 cm (3. Größe) stricken Sie die nächste Hinreihe (im Muster wie zuvor): 60 Maschen stricken, 16 Maschen abketten, 60 Maschen stricken. Jezt stricken Sie eine Schulter nach der anderen. Wenden Sie und die Rückreihe über die 60 M stricken, die 2 ersten Maschen am Anfang der nächste Reihe stricken = 58 M bleiben. Stricken Sie dann bis zur Ende wie beschrieben und abketten Sie die Maschen von der 1. Schulter. Dann die Maschen von den anderen Schulter stricken (wie bei der 1. aber spiegelverkehr, die 2 Maschen für den Halsauschnitt werden bei einer Rückreihe abgekettet). Viel Spaß beim stricken!

18.05.2020 - 08:16