DROPS / 197 / 24

Lady Angelika by DROPS Design

Knitted sweater with lace pattern in DROPS Flora. Sizes S - XXXL. Knitted hat with lace pattern in DROPS Flora.

Tags: hats, lace, sweaters,

DROPS Design: Pattern no fl-035
Yarn group A
-------------------------------------------------------

YARN FOR WHOLE SET:
Sizes: S - M - L - L/XL - XXL - XXL/XXXL
Finished measurements:
Chest measurements: 84-92-100-108-126-134 cm = 33”-36 1/4”-39 3/8”-42 1/2”-49 1/2”-52 3/4”
Full length: 56-58-60-62-64-66 cm = 22"-22 3/4"-23 5/8"-24 3/8"-25 1/4"-26"
All measurements in charts are in cm

Fits head size: 54/56 - 54/56 - 56/58 - 56/58 - 58/60 - 58/60 cm = 21 1/4”/22” – 21 1/4”/22” – 22”/22 3/4” – 22”/22 3/4” – 22 3/4”/23 5/8” – 22 3/4”/23 5/8”
Materials:
DROPS FLORA from Garnstudio (belongs to yarn group A)
350-350-400-450-500-550 g color 20, peach pink

YARN FOR SWEATER:
Sizes: S - M - L - L/XL - XXL - XXL/XXXL
Finished measurements:
Chest measurements: 84-92-100-108-126-134 cm = 33”-36 1/4”-39 3/8”-42 1/2”-49 1/2”-52 3/4”
Full length: 56-58-60-62-64-66 cm = 22"-22 3/4"-23 5/8"-24 3/8"-25 1/4"-26"
All measurements in charts are in cm

Materials:
DROPS FLORA from Garnstudio (belongs to yarn group A)
300-350-350-400-450-500 g color 20, peach pink

YARN FOR HAT:
Sizes: S/M - M/L - L/XL
Fits head size: approx. 54/56 - 56/58 - 58/60 cm = 21 1/4”/22” – 22”/22 3/4” – 22 3/4”/23 5/8”
Materials:
DROPS FLORA from Garnstudio (belongs to yarn group A)
50-50-50 g color 20, peach pink

-------------------------------------------------------
ACCESSORIES FOR THE PIECE:

SWEATER:

KNITTING GAUGE:
24 stitches in width and 38 rows in height with lace pattern on body and bottom of sleeves = 10 x 10 cm = 4” x 4”.
1 repeat measures: A.1 - 6 cm = 2 3/8” in width, A.2 - 5 cm = 2” in width, A.4 - 4 cm = 1 1/2” in width.
23 stitches in width and 30 rows in height with stockinette stitch on sleeves = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM = US 4.
DROPS CIRCULAR NEEDLE SIZE 3.5 MM = US 4: length 40 cm = 16” and 80 cm = 32” for lace pattern and stockinette stitch.
DROPS CIRCULAR NEEDLE SIZE 3 MM = US 2,5: length 40 cm = 16” for garter stitch neck.
The needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

HAT:

KNITTING GAUGE:
24 stitches in width and 38 rows in height with lace pattern = 10 x 10 cm = 4” x 4”.
1 repeat measures: A.8 - 5 cm = 2” in width, A.3 - 5 cm = 2” in width.
23 stitches in width and 30 rows in height with stockinette stitch = 10 x 10 cm = 4” x 4”.

NEEDLES:
DROPS DOUBLE POINTED NEEDLES SIZE 3.5 MM = US 4.
DROPS CIRCULAR NEEDLE SIZE 3.5 MM = US 4: length 40 cm = 16” for lace pattern.
DROPS CIRCULAR NEEDLE SIZE 2.5 MM = US 1,5: length 40 cm = 16” for rib.
The needle size is only a guide. If you get too many stitches on 10 cm = 4”, change to a larger needle size. If you get too few stitches on 10 cm = 4”, change to a smaller needle size.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (16)

65% Wool, 35% Alpaca
from 3.90 $ /50g
DROPS Flora uni colour DROPS Flora uni colour 3.90 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Flora mix DROPS Flora mix 4.10 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 27.30$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
-------------------------------------------------------
EXPLANATIONS FOR THE PATTERN:

-------------------------------------------------------

RIDGE/GARTER STITCH (worked in the round):
1 ridge = 2 rounds. Knit 1 round and purl 1 round.

PATTERN:
Sweater: See diagrams A.1 to A.7. Choose diagram for your size (applies to A.5 and A.6).
Hat: See diagrams A.3, A.8 and A.9.
The diagrams show all the rows in the pattern seen from the right side.

INCREASE TIP (for mid under sleeve):
Start 1 stitch before the stitch with the marker thread, make 1 yarn over, knit 3 (the marker thread sits in the middle stitch of these 3 stitches), make 1 yarn over (= 2 stitches increased). On the next round knit the yarn overs twisted to avoid holes.

DECREASE TIP-1 (evenly spaced):
To work out how to decrease evenly, count the total number of stitches on the needle (e.g. 124 stitches) and divide by the number of decreases to be made (e.g. 16) = 7.75.
In this example, decrease by knitting each 7th and 8th stitch together (approx.).

DECREASE TIP-2 (for top of hat):
Decrease as follows before the garter stitch: Start 2 stitches before the stitch with the marker thread, knit 2 together (= 1 stitch decreased).
Decrease as follows after the garter stitch: Slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch (= 1 stitch decreased).

----------------------------------------------------------

START THE PIECE HERE:

-------------------------------------------------------

SWEATER – SHORT OVERVIEW OF THE PIECE:
The piece is worked in the round with circular needle, bottom up as far as the armholes. Then the front and back pieces are worked separately, back and forth with circular needle. The sleeves are worked in the round with double pointed needles/short circular needle, bottom up.

BODY:
Cast on 280-308-336-364-420-448 slightly loose stitches with circular needle size 3.5 mm = US 4 and Flora. Work 3 RIDGES in the round – read description above. Work 2 rounds of stockinette stitch. Then work A.1 in the round (= 20-22-24-26-30-32 repeats of 14 stitches). When A.1 has been completed there are 240-264-288-312-360-384 stitches on the needle and the piece measures approx. 7 cm = 2 3/4” from the cast-on edge at the longest point.
REMEMBER THE KNITTING GAUGE!
Then work A.2 (= 20-22-24-26-30-32 repeats of 12 stitches). When A.2 has been completed, work A.3 (= 20-22-24-26-30-32 repeats of 12 stitches). When A.3 has been completed there are 200-220-240-260-300-320 stitches on the needle. Then work A.4 (= 20-22-24-26-30-32 repeats of 10 stitches). When A.4 has been worked a total of 3 times in height, insert 2 marker threads in the piece as follows (without working the stitches): The first marker thread is inserted in the first stitch on the round, then count 99-109-119-129-149-159 stitches and insert 1 marker thread in the next stitch. There are 99-109-119-129-149-159 stitches left on the round after the second marker thread. The threads mark the sides of the body.
READ THE REST OF BODY BEFORE CONTINUING!
PATTERN:
The next round is worked as follows: Work 5-10-15-15-25-30 stitches in stockinette stitch (marker thread in first of these stitches), work A.5A (= 5 stitches), A.5B over the next 80-80-80-90-90-90 stitches (= 8-8-8-9-9-9 repeats of 10 stitches), A.5C (= 6 stitches), work 9-19-29-29-49-59 stitches in stockinette stitch (marker thread in the middle stitch of these stitches), work A.5A (= 5 stitches), A.5B over the next 80-80-80-90-90-90 stitches (= 8-8-8-9-9-9 repeats of 10 stitches), A.5C (= 6 stitches) and finish with 4-9-14-14-24-29 stitches in stockinette stitch. Continue this pattern, but when A.5 has been worked 1-1-1-2-2-2 times in height work A.6 over A.5 in the same way. When A.X in A.6 has been worked 1 time in height work A.Y to finished length.
ARMHOLE:
AT THE SAME TIME when the piece measures 38-38-39-40-41-42 cm = 15”-15”-15 1/4”-15 3/4”-16 1/8”-16 1/2” bind off for armholes in each side as described below. The marker threads have been inserted in the piece and you should have started A.5 as described above, but adjust so that the next round is an odd round in the diagrams, i.e. a round of lace pattern. This is important so that the rows of pattern are worked from the right side when you start working back and forth.
The bind-off round is worked as follows: Bind off 3-3-4-4-6-8 stitches for armhole, work the next 95-105-113-123-139-145 stitches as before, bind off 5-5-7-7-11-15 stitches for armhole, work the next 95-105-113-123-139-145 stitches as before and bind off the remaining 2-2-3-3-5-7 stitches for armhole. Front and back pieces are finished separately.

FRONT PIECE:
= 95-105-113-123-139-145 stitches. Continue the pattern back and forth as before (the first row is from the wrong side and each row from the wrong side is purled).
AT THE SAME TIME bind off for armholes at the beginning of each row in each side as follows: Bind off 3 stitches 0-0-0-0-2-3 times, 2 stitches 0-2-3-3-4-4 times and then 1 stitch 1-2-4-4-4-4 times in each side = 93-93-93-103-103-103 stitches left. Continue the pattern as before with 1 edge stitch in each side (knit edge stitch from right and wrong side).
When the piece measures approx. 48-50-52-53-55-57 cm = 19”-19 3/4”-20 1/2”-21”-21 5/8”-22 1/2” (A.X in A.6 should now be finished and A.Y should have started) place the middle 19-19-19-23-23-23 stitches on 1 thread for neck and each shoulder is finished separately. Continue casting off for neck at the beginning of each row from the neck as follows: Bind off 2 stitches 3 times and 1 stitch 3 times = 28-28-28-31-31-31 stitches left on shoulder. Continue working until there is 1 row left before the piece measures 56-58-60-62-64-66 cm = 22"-22 3/4"-23 5/8"-24 3/8"-25 1/4"-26". Knit 1 row from the wrong side. Loosely bind off with knit from the right side. Work the other shoulder in the same way.

BACK PIECE:
= 95-105-113-123-139-145 stitches. Continue the pattern back and forth as before (the first row is from the wrong side and each row from the wrong side is purled).
AT THE SAME TIME bind off for armholes at the beginning of each row in each side as follows: Bind off 3 stitches 0-0-0-0-2-3 times, 2 stitches 0-2-3-3-4-4 times and then 1 stitch 1-2-4-4-4-4 times in each side = 93-93-93-103-103-103 stitches left. Continue the pattern as before with 1 edge stitch in each side (knit edge stitch from right and wrong side). Remember that when A.X in A.6 has been worked 1 time in height, you continue with A.Y to finished length.
AT THE SAME TIME when the piece measures 54-56-58-60-62-64 cm = 21 1/4"-22"-22 3/4"-23 5/8"-24 3/8"-25 1/4" bind off the middle 33-33-33-37-37-37 stitches for neck and each shoulder is finished separately. Then bind off 2 stitches on the next row from the neck = 28-28-28-31-31-31 stitches left on shoulder. Continue working until there is 1 row left before the piece measures 56-58-60-62-64-66 cm = 22"-22 3/4"-23 5/8"-24 3/8"-25 1/4"-26". Knit 1 row from the wrong side. Loosely bind off with knit from the right side. Work the other shoulder in the same way.

SLEEVE:
Cast on 60-60-60-72-72-72 slightly loose stitches with double pointed needles size 3.5 mm = US 4 and Flora. Work 3 ridges in the round. Work 2 rounds of stockinette stitch. Then work A.7 in the round (= 5-5-5-6-6-6 repeats of 12 stitches). When A.7 has been completed work A.3 in the round (= 5-5-5-6-6-6 repeats of 12 stitches). Continue this pattern, but when there are 6 rounds left in A.3 work stockinette stitch over the one purled stitch in the pattern until A.3 is finished. When A.3 has been completed, there are 50-50-50-60-60-60 stitches on the needles. Insert 1 marker thread in the first stitch on the round and allow it to follow your work onwards. The marker thread will be used when you increase mid under sleeve.
Work stockinette stitch in the round. When the piece measures 14-14-13-13-13-13 cm = 5 1/2”-5 1/2”-5 1/8”-5 1/8”-5 1/8”-5 1/8” increase 2 stitches mid under sleeve – read INCREASE TIP. Increase like this a total of 11-17-19-17-21-23 times in Size S: Every 10th round, in M and L/XL: Every 6th round, in L: Alternately every 5th and 6th round, in XXL: Alternately every 4th and 5th round and in XXL/XXXL: Every 4th round = 72-84-88-94-102-106 stitches. Continue until the sleeve measures 50-50-49-48-46-45 cm = 19 3/4”-19 3/4”-19 1/4”-19”-18”-17 3/4” (shorter measurements in the larger sizes due to wider shoulders and longer sleeve cap). The next round is worked as follows: Bind off 3-3-4-4-6-8 stitches, work 67-79-81-87-91-91 stitches in stockinette stitch and bind off the remaining 2-2-3-3-5-7 stitches. Cut the strand. Then finish the sleeve cap back and forth with circular needle size 3.5 mm = US 4 as follows: Work stockinette stitch and bind off at the beginning of each row in each side as follows: Bind off 3 stitches 1 time in all sizes, 2 stitches 2-2-3-3-4-4 times and 1 stitch 1-2-4-4-7-10 times in each side, then bind off 2 stitches in each side until the piece measures 55-56-57-56-57-58 cm = 21 5/8”-22”-22 1/2”-22”-22 1/2”-22 3/4”. Bind off 3 stitches 1 time in each side and then bind off the remaining stitches. The sleeve measures approx. 56-57-58-57-58-59 cm = 22”-22 1/2”-22 3/4”-22 1/2”-22 3/4”-23 1/4” from top down.
Work the other sleeve in the same way.

ASSEMBLY:
Sew shoulder seams inside the bind-off edge. Sew in the sleeves inside the 1 edge stitch in each side.

NECK: Knit up approx. 90 to 106 stitches from the right side around the neck with short circular needle size 3 mm = US 2,5 and Flora. Purl 1 round, knit 1 round and purl 1 round. Bind off with knit.

-------------------------------------------------------

HAT - SHORT OVERVIEW OF THE PIECE:
The piece is worked in the round with short circular needle, bottom up. Change to double pointed needles when necessary.

HAT:
Cast on 124-136-136 stitches with short circular needle size 2.5 mm = US 1,5 and Flora. Knit 1 round. Then work rib in the round (= knit 2 / purl 2) for 4 cm = 1 1/2”. Change to short circular needle size 3.5 mm = US 4 and knit 2 rounds where you decrease 16 stitches evenly on first round – read DECREASE TIP-1 = 108-120-120 stitches. Work A.8 in the round (= 9-10-10 repeats of 12 stitches). When A.8 has been completed work A.3 in the round (= 9-10-10 repeats of 12 stitches). When A.3 has been completed there are 90-100-100 stitches on the needle. Then work A.9 in the round (= 9-10-10 repeats of 10 stitches). A.9 is repeated to finished length. AT THE SAME TIME when the piece measures 17-19-21 cm = 6 3/4”-7 1/2”-8 1/4” insert 1 marker thread in each garter stitch (= 9-10-10 marker threads in the piece). On the next round decrease 1 stitch before each garter stitch – read DECREASE TIP-2 = 81-90-90 stitches. Work 1 round without decreasing. On the next round decrease 1 stitch after each garter stitch – read DECREASE TIP-2 = 72-80-80 stitches. Continue to decrease like this, alternately before and after the garter stitch, every 2nd round until you have decreased a total of 8 times by each marker thread (4 times before and 4 times after each marker thread) = 18-20-20 stitches left. Work 1 round where all stitches are knitted together 2 and 2 = 9-10-10 stitches left. Knit 1 round without decreasing. On the next round knit all stitches together again 2 and 2 = 5 stitches left in all sizes. Cut the strand, pull it through the remaining stitches, tighten and fasten well. The hat measures approx. 23-25-27 cm = 9”-9 3/4”-10 5/8” from the top down.

This pattern has been corrected. .

Updated online: 02.04.2019
Diagrams A.1 and A.7 have been corrected

Diagram

All measurements in charts are in cm.

= knit from right side, purl from wrong side
= purl from right side
= between 2 stitches make 1 yarn over
= knit 2 together
= slip 1 stitch as if to knit, knit 1 and pass the slipped stitch over the knitted stitch
= slip 1 stitch as if to knit, knit 2 together and pass the slipped stitch over the knitted together stitches - NOTE: On round marked with an arrow in A.1 and A.7, the beginning of round is displaced 1 stitch to the right as follows: Don’t work the last stitch on previous round (ie: round before the one marked with arrow), this is now the first stitch on round marked with arrow. Work the round. On next round knit all stitches, but last stitch is not worked when next round starts with this symbol. On row marked with an arrow in A.2, A.3 and A.4 the round start is displaced by 2 stitches to the left, i.e. slip the first 2 stitches onto the right needle without working them, then work the repeat in the round. The 2 slipped stitches are worked in the last repeat. On the next round all stitches are knitted and on the round after that the round start is moved back to where it was before





Elaine Hébert 18.05.2019 - 15:08:

Comment mesurer le tour de tête pour pouvoir choisir la bonne grandeur du bonnet ?

DROPS Design 20.05.2019 kl. 10:21:

Bonjour Mme Hébert, mesurez le tour de tête au niveau du front (en gardant le mètre ruban bien droit). Le bonnet sera légèrement plus court en circonférence pour bien s'adapter à la tête et à la taille indiquée. Bon tricot!

Petra 18.03.2019 - 18:51:

Im Diagramm ist das Maß von 56 cm bis zum Beginn der Armausschnitte angegeben. In der Anleitung Seite 3 steht Armausschnitte: GLEICHZEITIG bei einer Länge von 38 cm für die Armauschnitte ... Wie ist das zu verstehen? Wann wird mit den Armausschnitte begonnen? Ich hoffe auf eine Antwort. Mit freundlichen Grüßen Petra

DROPS Design 19.03.2019 kl. 10:17:

Liebe Petra, die Maschen für die Armausschnitte werden bei 38 cm abgekettet, dann stricken Sie jedes Teil separat bis 56 cm (= 18 cm Armausschnitt), so haben Sie: 38 cm + 18 cm = 56 cm gesamte Höhe. Viel Spaß beim stricken!

ChrisPJ 18.03.2019 - 09:40:

Hallo, Ihr solltet erwähnen, dass sich der Rapport ändert beim Wechsel von A1 auf A2 (genauso wie beim Wechsel von A7 auf A3). Die Linie mit den linken Maschen muss fortgesetzt werden, also muss A2 in der Mitte von A1 anfangen. Habe ich leider zu spät gemerkt, sieht aber auch gut aus, wenn man den Rapport nicht ändert, dann wird es eher ein Blattmuster am Übergang :-) Grüße, Christine

DROPS Design 18.03.2019 kl. 11:42:

Liebe ChrisPJ, danke für den Hinweis, unser Designteam wird das mal schauen. Viel Spaß beim stricken!

Cajsa 06.12.2018 - 11:08:

På mitt mönster finns det inget.

DROPS Design 06.12.2018 kl. 11:35:

Hei Cajsa. Ser du de andre diagrammene? gjelder dette uansett hvaslags enhet du bruker? (mobil, nettbrett, pc). Vi har dobbelsjekket dette hos oss, og alle diagrammene skal være synlige. Du kan eventuelt prøve å se på den norske eller danske oppskriften og se om du ser det der. God fornøyelse

Cajsa 06.12.2018 - 10:00:

Var är mönster A4??? Hittar inget sånt...

DROPS Design 06.12.2018 kl. 11:04:

Hei Cajsa. A.4 ligger sammen med de andre diagrammene enderst på siden: Det ligger under A.6, til venstre for A.3 og over A.12. God fornøyesle

Doris 26.10.2018 - 07:41:

In der Beschreibung ist bei "Rumpfteil" von "A.X" und "A.Y" die Rede, das verstehe ich nicht. Was ist damit gemeint?

DROPS Design 26.10.2018 kl. 09:07:

Liebe Doris, A.X in A.6 = die ersten Reihen, an der rechten Seite mit "A.X" markiert sind. A.Y sind dann die 4 letzten Reihen in A.6 = die sind an der rechten Seite von den Diagrammen mit "A.Y" markiert. Viel Spaß beim stricken!

Doenja 17.10.2018 - 16:39:

Graag een juiste vertaling. Er staat erg veel Engels tussendoor wat het erg verwarrend maakt !!

Madelon 17.10.2018 - 13:43:

Ik heb een vraag: ik merk dat ik jullie modellen vaak te kort vind. Ik hou er van als truien over mijn billen vallen. Hoe kan ik nu bijvoorbeeld bij dit patroon eenvoudig de trui langer maken zonder dat dit de rest van het patroon beïnvloedt? Welke tip hebben jullie hiervoor? Ik hoor het graag!

DROPS Design 28.10.2018 kl. 17:54:

Dag Madelon,

Bij deze trui zou je wat extra herhalingen van A.5 kunnen maken om het lijf langer te maken.

Rianne 16.10.2018 - 16:12:

Ik vind dit een erg leuke trui. Helaas staan er in de Nederlandse vertaling nog erg veel fouten.

Cécile 09.08.2018 - 22:09:

Longing

Post a comment to pattern DROPS 197-24

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.