Olivia wrote:
Hej jag förstår inte mönstret, varför är tecknet för omslag i mitten av två rutor,? Olivia
12.05.2021 - 17:17DROPS Design answered:
Hej Olivia, för att du gör omslaget mellan 2 maskor. Varv 1: 1rm, 2rm tills, 1 omslag, 1rm, 1 omslag, lyft 1 m, 1rm, drag den lyfta m över, 1rm, osv... Lycka till :)
14.05.2021 - 09:37Maria wrote:
Tricotei a frente direita seguindo os gráficos , 1ºM2a e seguidamente M2b, mas como devo proceder para tricotar a frente esquerda? qual a ordem que devo dar aos gráficos?
09.04.2020 - 22:33DROPS Design answered:
Olá, A frente esquerda tricota-se da mesma maneira e pela mesma ordem. uma vez que o ponto é o mesmo = Tricotar a carreira seguinte a partir da orla: 5 ms/pts em ponto jarreteira (= orla), 1 vez M2A, tricotar as restantes malhas seguindo M2B, 1 m/p ourela em ponto jarreteira no lado da cava. O que deve ter em atenção é começar pela orla do decote da frente esquerda até à cava. Bom Tricô!
14.04.2020 - 11:53Lydie PEYRICHOUT wrote:
Que veux dire M2A et M2B ?
04.02.2019 - 21:06DROPS Design answered:
Bonjour Mme Peyrichout, M.2A et M.2B sont les parties du diagramme M.2 à tricoter ainsi: commencez le rang par M.2A, puis répétez M.2B jusqu'à la fin du rang. Bon tricot!
05.02.2019 - 08:45Lefloch wrote:
Merci de me dire si c est du coton ou de la laine ?
05.01.2018 - 14:16DROPS Design answered:
Bonjour, c'etait 100% soie. Vous pouvez utiliser en alternative à celle-ci. Le résultat le plus similaire est obtenu en utilisant DROPS Baby Alpaca Silk. Bon tricot!
05.01.2018 - 14:29Lorraine wrote:
When this garment was made with the now discontinued silk yarn was the yarn used with two strands? I would like to make this pattern in a yarn with some silk content so I can use it for evening wear. Making it in a heavy cotton does not suit its intended purpose.
04.06.2017 - 08:10DROPS Design answered:
Dear Lorraine, This DROPS Silke was group C - correction will be done, so that you can use eg DROPS Paris as an alternative. Happy knitting!
07.06.2017 - 15:57Crissie wrote:
Hi another question, if I knit sleeves on straight needles, does pattern change, what about alternate row. Thanks again
03.02.2017 - 20:20DROPS Design answered:
Dear Crissie, please read here how to adjust a pattern on straight needles. Start reading diagrams starting from the bottom corner on the right side towards the left from RS and work from WS reading from the left towards the right. Happy knitting!
06.02.2017 - 09:05Crissie wrote:
Thanks so much for all your help
03.02.2017 - 16:17Crissie wrote:
Thank you for your prompt reply, still not sure "adjust to pattern". Are 2 ridges repeated after each set of M2b. Thanks again
03.02.2017 - 09:53DROPS Design answered:
Dear Crissie, work first 2 ridges then repeat M.2 in height until piece measures 8 cm, there are no ridges between the repeat in M.2. Happy knitting!
03.02.2017 - 13:32Crissie Grehan wrote:
Working Sleeve first, Don't understand lace pattern for sleeve, work 2 ridges then M 2b, how many rows are in M 2b. ?. 8cm adjust to the pattern ? what pattern. Thank you
02.02.2017 - 19:23DROPS Design answered:
Dear Mrs Grehan, you work M.2b until piece measures 8 cm from the cast on edge (including the 2 ridges), adjust after a full repeat of diagram in height. Happy knitting!
03.02.2017 - 09:09
Frederika |
|||||||||||||||||||
|
|
||||||||||||||||||
DROPS Cardigan in Silke or Paris with lace pattern.
DROPS 61-7 |
|||||||||||||||||||
Gauge: 17 sts x 22 rows in stockinette st = 10 x 10 cm [4" x 4"]. (Be sure to maintain the gauge - if knit too loosely the garment will stretch. Silke is not machine washable). Pattern: See charts (1 chart = 1 repeat). The pattern is shown from the right side. Garter st, when knitting flat: Knit all sts, all rows. Garter st, when knitting in the round: *Rnd 1, knit. Rnd 2, purl.* Repeat from * - *. Buttonholes: When the work measures 2 cm [0.75"], 9.5 (10-10) cm [3.75" (4" - 4")], 17 (18-18) cm [6.75" (7" - 7")], 25 (26-26) cm [9-7/8" (10.25" - 10.25")], 32.5 (34-34) cm [12.75" (13-3/8" - 13-3/8")] and 40 (42-42) cm [15.75" (16.5" - 16.5")] bind off for buttonholes on the right front as follows: bind off the 3rd and 4th sts and cast on 2 new sts over the bound-off sts on the next row. Knitting tip: Because of the pattern stitch, it is easy to make a mistake in the number of stitches bound off, increased or decreased. Be sure you have the correct number of sts in each row. Body: Cast on 173 (185-197) sts (including 5 sts at each end for the button bands) on circular needles and knit Pattern 1, keeping the 5 button band sts at each side in garter st throughout. Make buttonholes on the right front (see instructions above). When the work measures 27 (31-32) cm [10-5/8" (12.25" - 12-5/8")] knit the next row as follows: 44 (47-50) sts for the front, bind off 4 sts for armhole, 77 (83-89) sts for the back, bind off 4 sts for armhole, 44 (47-50) sts for the front. Knit the rest of each part separately. Front: = 44 (47-50) sts. Knit the next row as follows from the center front edge: 5 sts garter st (button band), Pattern 2A one time; knit the remaining sts in Pattern 2B, keeping the armhole edge st in garter st throughout. Continue in pattern and bind off for armholes every other row: 3 sts 1 (1-2) times, 2 sts 1 time, 1 st 2 times = 37 (40-40) sts. When the work measures 40 (42-42) cm [15.75" (16.5" - 16.5")], bind off at the neck edge every other row: 11 (12-12) sts 1 time, 3 sts 1 time, 2 sts 1 time, 1 st 2 times. Bind off when the work measures 50 (54-56) cm [19.75" (21.25" - 22")]. Back: = 77 (83-89) sts. Knit Pattern 2B, centering the pattern across the row. Keep 1 st at each armhole edge in garter st throughout. Bind off for armholes as on the front = 63 (69-69) sts. When the work measures 48 (52-54) cm [18-7/8" (20.5" - 21.25")] bind off the center 21 (23-23) sts for the neck. Bind off 2 sts at each neck edge on the next row. Bind off when the work measures 50 (54-56) cm [19.75" (21.25" - 22")]. Sleeves: Cast on 54 sts on double pointed needles; join and place a marker at the join. Knit 4 rows garter st, then Pattern 2B, centering the pattern across the row. When the work measures 8 cm [3-1/8"] - adjust for complete pattern - knit 4 rows garter st, decreasing 18 sts evenly distributed on the first row of garter st = 36 sts. Then knit Pattern 2B, centering the pattern across the row. Inc 1 st each side of marker 18 (18-19) times: Sizes S+M: every 4th row Size L: alternately every 3rd and 4th row = 72 (72-74) sts. Knit the increased sts into the pattern as you go along. When the work measures 45 (44-44) cm [17.75" (17.25" - 17.25")] bind off 2 sts each side of marker. Knit the rest back and forth on the needles. Bind off for sleeve caps each side every other row: 3 sts 2 times, 2 sts 3 (3-4) times, 1 st 2 (2-3) times, 2 sts 4 times, 3 sts 2 times, bind off. The work measures approx. 57 (56-58) cm [22.5" (22" - 22-7/8")]. Assembly: Sew shoulder seams. Pick up approx. 75-90 sts around the neck and knit 4 rows garter st, bind off. Crochet border: Crochet borders around the neck and the sleeve edges. Crochet from the right side as follows: 1 single crochet (sc), *ch 4 over 1 knit st, 1 sc in the next knit st *, repeat * - *. Sew in the sleeves and buttons. |
|||||||||||||||||||
Diagram explanations |
|||||||||||||||||||
|
|||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Yungsoon Naill wrote:
Love the look of this sweater! But the directions are a bit confusing: 1. Between the YO’s is there a knit stitch? 2. When working the left front panel, does the pattern need to be done in reverse to get the M2a next to the button band? If so, do the types of decreases get reversed too? To keep the sweater symmetrical.
02.08.2021 - 15:54