DROPS Paris
DROPS Paris
100% Cotton
from 1.10 $ /50g
Get the yarn to make this pattern from 6.60$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 190-20
DROPS Design: Pattern no w-721
Yarn group C or A + A
-----------------------------------------------------------
Sizes: S/M - L/XL
Fits head size: approx. 54/56 - 58/60 cm / 21''/22'' - 22½''/23½''
Materials:
DROPS PARIS from Garnstudio (belongs to yarn group C)
200-250 g color 16, white
50-50 g color 58, powder pink
50-50 g color 59, light old pink

The piece can also be crocheted with yarn from:
"Alternative yarn (Yarn group C)" – see link below.

DROPS CROCHET HOOK SIZE 4.5 MM/US 7 – or the size needed to get 16 double crochets and 9 rows on 10 cm / 4'' in width and 10 cm / 4'' in height.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Paris
DROPS Paris
100% Cotton
from 1.10 $ /50g
Get the yarn to make this pattern from 6.60$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
INFORMATION FOR THE PATTERN:

PATTERN:
See diagrams A.1 to A.4.

CROCHET INFO:
Each round of double crochets starts with 3 chain stitches (replaces the first double crochet) and ends with 1 slip stitch in the 3rd chain stitch at the beginning of the round.
The round with treble crochets in A.1 starts with 4 chain stitches (replaces the first treble crochet) and ends with 1 slip stitch in the 4th chain stitch at the beginning of the round.

INCREASE TIP:
Work 2 double crochets in the same stitch.

DECREASE TIP:
Work 2 double crochets together as follows: * Make 1 yarn over, insert the hook through the next stitch, pick up the strand, make 1 yarn over and pull the strand through the first 2 loops on the hook *, work from *-* 1 more time, make 1 yarn over and pull the strand through all 3 loops on the hook (= 1 double crochet decreased).

COLOR CHANGE:
To get a neat transition when changing color, work the last slip stitch of the round with the new color as follows: Insert the hook into the 3rd chain stitch at the beginning of the round, pick up the new color, make a yarn over with the new color and pull it through the loops on the hook.
----------------------------------------------------------

HAT:
The piece is worked in the round, top down; i.e. you work from the top of the hat down, working the brim in the round to finish. The inner part of the flower is worked at the same time as the hat and the petals are worked afterwards.
Work 2 chain stitches with hook size 4.5 mm/US 7 and white.
ROUND 1: Work 12 double crochets in the first chain stitch - read CROCHET INFO!
ROUND 2: Work 2 double crochets in each double crochet = 24 double crochets.
ROUND 3: Work * 2 double crochets in the first/next double crochet, 1 double crochet in the next double crochet, *, work from *-* to end of round = 36 double crochets.
ROUND 4: Work * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 2 double crochets *, work from *-* to end of round = 48 double crochets.
ROUND 5: Work * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 3 double crochets *, work from *-* to end of round = 60 double crochets. REMEMBER THE CROCHET GAUGE!
ROUND 6: Work * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 4 double crochets *, work from *-* to end of round = 72 double crochets.
Now size S/M has finished its increases, continue increasing in size L/XL as follows:
ROUND 7: Work * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 5 double crochets *, work from *-* to end of round = 84 double crochets.

BOTH SIZES:
Work 1 round with 1 double crochet in each double crochet AT THE SAME TIME as you increase 4-0 double crochets evenly on round – read INCREASE TIP = 76-84 double crochets. Work 2 rounds with 1 double crochet in each double crochet. The piece measures approx. 10-11 cm from the middle out.
Now work A.1 (= 4 stitches) over all stitches (= 19-21 times). On the last round of A.1 decrease 4 double crochets evenly on round – read DECREASE TIP = 72-80 double crochets. When A.1 has been worked 1 time in height, work A.2 and A.3 as follows:
Work with powder pink – read COLOR CHANGE, as follows:
ROUND 1: Work 1 double crochet in each double crochet.
ROUND 2: Work A.2 as follows: ** Work 1 double crochet in each of the first/next 3 double crochets, work 2 double crochets together in the next double crochet and around these double crochets work A.3 (= flower) as follows (see arrow in A.3, the flower starts here): Around the last double crochet worked in A.2 work as follows: * Work 4 chain stitches, 1 slip stitch *, work from *-* a total of 3 times, then work around the next-to-last double crochet worked in A.2 as follows: Work from *-* a total of 2 times, work 1 chain stitch, then work A.2 as follows: Work 1 double crochet in each of the next 4 double crochets **. Work from **-** to end of round = 9-10 flowers. You will work the petals around the chain-spaces later (= A.4).
Change to white.
ROUND 3: * Work 1 double crochet in each of the first/next 3 double crochets, work 1 double crochet around the chain stitch worked after the flower, work 1 double crochet in each of the next 4 double crochets *, work from *-* AT THE SAME TIME as you increase 18-10 double crochets evenly on round = 90 double crochets.
When A.2 and A.3 have been worked 1 time in height, the piece measures approx. 18-19 cm. Now work the brim with white as follows:
ROUND 1: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 8 double crochets *, work from *-* to end of round = 100 double crochets.
ROUND 2: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 9 double crochets *, work from *-* to end of round = 110 double crochets.
ROUND 3: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 10 double crochets *, work from *-* to end of round = 120 double crochets.
ROUND 4: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 11 double crochets *, work from *-* to end of round = 130 double crochets.
ROUND 5: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 12 double crochets *, work from *-* to end of round = 140 double crochets.
ROUND 6: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 13 double crochets *, work from *-* to end of round = 150 double crochets.
ROUND 7: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 14 double crochets *, work from *-* to end of round = 160 double crochets.
ROUND 8: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 15 double crochets *, work from *-* to end of round = 170 double crochets.
ROUND 9: * 2 double crochets in the first/next double crochet, 1 double crochet in each of the next 16 double crochets *, work from *-* to end of round = 180 double crochets.
Cut and fasten strands.

FLOWER:
Around each chain-space worked in A.3 work A.4 with light old pink. When A.4 has been worked around all 5 chain-spaces in 1 flower, cut the strand, tie the ends together and fasten. Work around all A.3s like this.

Diagram

All measurements in charts are in cm.

symbols = double crochet in stitch
symbols = double crochet around/between chain stitch/stitches
symbols = treble crochet in stitch
symbols = work 2 double crochets together as follows: * Make 1 yarn over, insert the hook through the next stitch, pick up the strand, make 1 yarn over and pull the strand through the first 2 loops on the hook *, work from *-* a total of 2 times, make 1 yarn over and pull the strand through all 3 loops on the hook.
symbols = slip stitch
symbols = round starts here
symbols = first round already worked, this shows how the next round is worked in/around the stitch
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 190-20

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (6)

country flag Tina Nordstrøm wrote:

Jeg har hæklet hatten i str L-XL.......hovedformen passer, men “skyggen” falder ned, og klasker......skal den stives med noget for at opnå den ombukkede effekt?

02.05.2019 - 15:29

DROPS Design answered:

Hej Tina, Det skal egentlig ikke være nødvendigt hvis du hækler den i DROPS Paris og hækler lidt stramt ifølge hæklefastheden i opskriften. God fornøjelse :)

03.05.2019 - 10:39

country flag Christa Hofer wrote:

Sehr, sehr lieb und hübsch

13.04.2019 - 22:45

country flag Karen wrote:

The hat is worked in the round but the pattern does not indicate making a ring. It just says "work 2 chains stitches"

03.07.2018 - 17:16

DROPS Design answered:

Dear Karen, yes, that is right. You work 2 chain sts, in the first of them work 12 treble crochets - this will make a base for circle and then continue work in round. Happy crocheting!

03.07.2018 - 21:32

country flag Chiara wrote:

Buongiorno, la ringrazio. Sí, ho controllato il campione ma il mio lavoro risulta essere un po' piú "pesante". Secondo lei potrebbe essere utile irrigidire la tesa con l'amido? Grazie.

26.06.2018 - 10:16

DROPS Design answered:

Buongiorno Chiara, l'amido potrebbe esserd una buona soluzione, oppure può provare a immergere la tesa in acqua zuccherata e lasciar asciugare. Buon lavoro!

26.06.2018 - 14:55

country flag Chiara wrote:

Buongiorno, la ringrazio. Sí, ho controllato il campione ma il mio lavoro risulta essere un po' piú "pesante". Secondo lei potrebbe essere utile irrigidire la tesa con l'amido? Grazie.

26.06.2018 - 10:01

country flag Chiara wrote:

Ho realizzato il modello 190-20 secondo le istruzioni. Ho utilizzato il filato Paris e l'uncinetto 4,5 mm. Mi sembra che il modello in foto sia stato realizzato con un filato più sottile rispetto a quello indicato. Se é effettivamente così, vorrei sapere quale filo e quale uncinetto sono stati utilizzati per il modello. Grazie.

25.06.2018 - 21:37

DROPS Design answered:

Buonasera Chiara, il modello è lavorato con il filato e l'uncinetto indicati nelle spiegazioni. Ha controllato che il suo campione corrispondesse a quello indicato prima di iniziare a lavorare? Buon lavoro!

25.06.2018 - 23:31