DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
Get the yarn to make this pattern from 20.70£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Atlantis Jacket

Jacket with domino squares, garter stitch, stripes and raglan, knitted top down. Size: S - XXXL Piece is knitted in DROPS Fabel.

DROPS 188-14
DROPS design: Pattern fa-399
Yarn group A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS FABEL from Garnstudio (belongs to yarn group A)
350-350-400-450-500-550 g colour 340, blue lagoon
100-150-150-150-150-200 g colour 114, light pearl grey

Piece can also be knitted with yarn from:
“Alternative yarn (yarn group A)” - see link below.

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (60 or 80 cm) SIZE 3.5 mm – or size needed to get 23 stitches and 45 rows in garter stitch = width 10 cm and 10 cm vertically.

DROPS CIRCULAR NEEDLE (60 or 80 cm) SIZE 2.5 mm – or size needed to get 26 stitches and 51 rows in garter stitch = width 10 cm and height 10 cm.

DROPS MOTHER-OF-PEARL BUTTON ARCHED (white), NO 521: 6-6-6-7-7-7 pieces
----------------------------------------------------------

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Fabel
DROPS Fabel
75% Wool, 25% Polyamide
from 2.30 £ /50g
Get the yarn to make this pattern from 20.70£.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
INFORMATION FOR PATTERN:

GARTER STITCH (back and forth):
1 ridge = knit 2 rows.

GARTER STITCH (in the round - applies to sleeves):
1 ridge = 2 rounds. Knit 1 round and purl 1 round.

RAGLAN (applies to yoke):
SIZE S-M-L-XL:
ROW 1 (= wrong side): Knit all stitches. 
ROW 2 (= right side): Make 1 yarn over after 1st-2nd-4th-5th marker and 1 yarn over before 3rd-4th-6th-7th marker (= 2 stitches increased on each sleeve, 2 stitches increased on back piece and 1 stitch increased on each front piece = 8 stitches increased in total on row).
ROW 3 (and all rows from wrong side): Knit all stitches, do not work yarn overs twisted; they should make holes.
ROW 4: Increase 2 yarn overs on each front piece and 4 yarn overs on back piece as follows: Make 2 yarn overs after 1st and 4th marker as follows: Work to and with stitch with marker, 1 yarn over, knit 1, 1 yarn over. Make 2 yarn overs before 4th and 7th marker as follows: Work until 1 stitch remains before stitch with marker, 1 yarn over, knit 1, 1 yarn over (= 4 stitches increased on back piece and 2 stitches increased on each front piece = 8 stitches increased in total on row). 
ROW 6: Work as 2nd row (= 2 stitches increased on each sleeve and 2 stitches increased on back piece and 1 stitch increased on each front piece = 8 stitches increased in total on row).
ROW 8: Make 1 yarn over after 1st and 4th marker and 1 yarn over before 4th and 7th marker (= 2 stitches increased on back piece and 1 stitch increased on each front piece = 4 stitches increased in total on row).
ROW 10: Work as 2nd row (= 2 stitches increased on each sleeve and 2 stitches increased on back piece and 1 stitch increased on each front piece = 8 stitches increased in total on row).
SIZE XXL-XXXL:
ROW 1 (= wrong side): Knit all stitches. 
ROW 2 (= right side): Make 1 yarn over after 1st-2nd-4th-5th marker and 1 yarn over before 3rd-4th-6th-7th marker (= 2 stitches increased on each sleeve, 2 stitches increased on back piece and 1 stitch increased on each front piece = 8 stitches increased on row).
ROW 3 (and all rows from wrong side): Knit all stitches, do not work yarn overs twisted; they should make holes.
ROW 4: Increase 2 yarn overs on each front piece and 4 yarn overs on back piece as follows: Make 2 yarn overs after 1st and 4th marker as follows: Work to and with stitch with marker, 1 yarn over, knit 1, 1 yarn over. Make 2 yarn overs before 4th and 7th marker as follows: Work until 1 stitch remains before stitch with marker, 1 yarn over, knit 1, 1 yarn over (= 4 stitches increased on back piece and 2 stitches increased on each front piece = 8 stitches increased in total on row). 
ROW 6: Work as 2nd row (= 2 stitches increased on each sleeve and 2 stitches increased on back piece and 1 stitch increased on each front piece = 8 stitches increased on row).
ROW 8: Work as 4th row (= 4 stitches increased on back piece and 2 stitches increased on each front piece = 8 stitches increased in total on row). 
ROW 10: Work as 2nd row (= 2 stitches increased on each sleeve and 2 stitches increased on back piece and 1 stitch increased on each front piece = 8 stitches increased on row).
ROW 12: Work as 2nd row (= 2 stitches increased on each sleeve and 2 stitches increased on back piece and 1 stitch increased on each front piece = 8 stitches increased on row).

INCREASE TIP-1:
Work 2 stitches in 1 stitch.

INCREASE TIP-2:
Increase with 1 yarn over between 2 stitches. Knit yarn over twisted on next row, it should not make holes.

DECREASE TIP (applies to mid under sleeve):
All decreases are made on a row with knit.
Decrease on each side of marker as follows: Begin 4 stitches before marker, knit 2 together, knit 4 (marker is in the middle of these stitches), slip 1 stitch knitwise, knit 1, pass slipped stitch over stitch worked (= 2 stitches decreased).

KNITTING TIP (applies to domino squares): 
Always pick up stitches from right side.

STRIPES:
Work first row in every stripe from right side (applies to domino squares).
Knit first round in every stripe (applies to sleeves).
Work 1 ridge with light pearl grey.
Work 1 ridge with blue lagoon.

WHOLE DOMINO SQUARE:
Insert 1 marker thread in the middle stitch.
ROW 1 (= wrong side): Knit all stitches.
ROW 2 (= right side): Knit until 1 stitch remains before marker thread, slip 1 stitch knitwise, knit 2 together, pass the slipped stitch over stitches worked, knit the rest of row.
Repeat 1st and 2nd row, i.e. decrease 2 stitches in the middle of the square on every other row until 1 stitch remains, cut the yarn and pull it through stitch. 

HALF DOMINO SQUARE (vertical):
ROW 1 (= wrong side): Knit all stitches.
ROW 2 (= right side): Knit 2 together, knit the rest of row.
Work opposite on the square in the other side of piece, i.e. knit until 2 stitches remain, knit 2 together (i.e. decrease is done towards mid front). 
Repeat 1st and 2nd row, i.e. decrease 1 stitch on square on every other row until 1 stitch remains. Cut the yarn and pull it through stitch. 

HALF DOMINO SQUARE (horizontal):
Work as whole domino square but in addition to decreasing in the middle of square, slip last stitch at the end of every row on 1 stitch holder. Continue until 7-5-7-7-7-7 stitches remain on needle (= 9-10-10-11-12-13 stitches on stitch holder in each side). Knit 1 row from wrong side and slip last stitch at the end of row on stitch holder = 6-4-6-6-6-6 stitches on needle. Work next row (= from right side) as follows: Knit 1-0-1-1-1-1, slip 1 stitch knitwise, knit 2 together, pass slipped stitch over the 2 stitches worked together (= 2 stitches decreased), knit 1-0-1-1-1-1, slip last stitch at the end of row on stitch holder = 3-1-3-3-3-3 stitches. Slip these stitches on stitch holder as well. Cut and fasten the yarn. There are now 23-23-25-27-29-31 stitches in total on stitch holder.

BUTTONHOLES:
Decrease for buttonholes on right band (when garment is worn). Decrease from right side when 3 stitches remain on row as follows: Make 1 yarn over, knit the next 2 stitches together, knit last stitch. On next row knit yarn over to make holes.
Decrease first buttonhole when yoke measures approx. 1½-2 cm. Then decrease the next 5-5-5-6-6-6 buttonholes, approx. 7-8 cm between each.
----------------------------------------------------------

JACKET:
Piece is worked back and forth, top down. Increase out for raglan on each side of each sleeve and mid front and mid back. When yoke is done, work 1 and 1 domino square. Work sleeves in garter stitch in the round at the end.

YOKE:
Cast on 117-133-133-145-145-153 stitches (including 5 band stitches in each side of piece) on circular needle size 2.5 mm with blue lagoon. Work 2 ridges in GARTER STITCH - see explanation above. Switch to circular needle size 3.5 mm.
Work next row as follows from right side:
Left front piece:
Work 5 band stitches in garter stitch, work 1 stitch in garter stitch and insert 1st marker in this stitch, 1 yarn over, work 14-18-18-21-21-23 stitches in garter stitch and increase 0-0-4-0-2-7 stitches evenly (= 21-25-29-28-30-37 stitches).
Left sleeve:
Work 1 stitch in garter stitch and insert 2nd marker in this stitch, 1 yarn over, work 22 stitches in garter stitch and increase 0-0-2-2-0-0 stitches evenly, 1 yarn over, work 1 stitch in garter stitch and insert 3rd marker in this stitch (= 26-26-28-28-26-26 stitches).
Back piece:
Work 14-18-18-21-21-23 stitches in garter stitch and increase 0-0-4-0-2-7 stitches evenly, 1 yarn over, work 1 stitch in garter stitch and insert 4th marker in this stitch (= mid back), 1 yarn over, work 14-18-18-21-21-23 stitches in garter stitch and increase 0-0-4-0-2-7 stitches evenly (= 31-39-47-45-49-63 stitches).
Right sleeve:
Work 1 stitch in garter stitch and insert 5th marker in this stitch, 1 yarn over, work 22 stitches in garter stitch and increase 0-0-2-2-0-0 stitches evenly, 1 yarn over, work 1 stitch in garter stitch and insert 6th marker in this stitch (= 26-26-28-28-26-26 stitches).
Right front piece:
Work 14-18-18-21-21-23 stitches in garter stitch and increase 0-0-4-0-2-7 stitches evenly, 1 yarn over, work 1 stitch in garter stitch and insert 7th marker in this stitch, work 5 band stitches in garter stitch (= 21-25-29-28-30-37 stitches) = 125-141-161-157-161-189 stitches in total.
Work and increase for RAGLAN – see explanation above, begin to work 3rd row (i.e. 1st row is from wrong side). Remember BUTTONHOLES - see explanation above. REMEMBER THE KNITTING TENSION!
Work 3rd to 10th-10th-10th-10th-12th-12th row 1 time = 153-169-189-185-201-229 stitches (= 26-30-34-33-37-44 stitches on each front piece and 30-30-32-32-32-32 stitches on each sleeve and 41-49-57-55-63-77 stitches on back piece).
Repeat 1st to 10th-10th-10th-10th-12th-12th row 7-7-8-8-7-7 times = 405-421-477-473-537-565 stitches (= 68-72-82-81-93-100 stitches on each front piece and 72-72-80-80-88-88 stitches on each sleeve and 125-133-153-151-175-189 stitches on back piece).
Then work the first 0-6-0-4-4-8 rows 1 more time = 405-445-477-489-553-597 stitches (= 68-76-82-84-96-106 stitches on each front piece and 72-76-80-82-90-92 stitches on each sleeve and 125-141-153-157-181-201 stitches on back piece).
Piece now measures approx. 18-20-21-22-23-24 cm measured along the shoulder. Knit 1 row from wrong side.
Now divide piece on next row from right side as follows:
Left front piece:
Work 6 band stitches in garter stitch (including stitch with marker), 1 yarn over (= 1 stitch increased), knit until 2 stitches remain before 2nd marker (= 60-68-74-76-88-98 stitches), knit 2 together (= 1 stitch decreased = 68-76-82-84-96-106 stitches)
Left sleeve:
Slip the next 72-76-80-82-90-92 stitches (including stitches with 2nd and 3rd marker) on a stitch holder for sleeve, cast on 8-8-8-12-12-12 stitches under sleeve (insert 1 marker thread in the middle of these new stitches).
Back piece:
Knit 2 together (= 1 stitch decreased), knit until 4th marker (= 60-68-74-76-88-98 stitches), 1 yarn over (= 1 stitch increased), knit 1 (= stitch with 4th marker), 1 yarn over (= 1 stitch increased), knit until 2 stitches remain before 5th marker (= 60-68-74-76-88-98 stitches), knit 2 together (= 1 stitch decreased = 125-141-153-157-181-201 stitches).
Right sleeve:
Slip the next 72-76-80-82-90-92 stitches (including stitches with 5th and 6th marker) on a stitch holder for sleeve, cast on 8-8-8-12-12-12 stitches under sleeve (insert 1 marker thread in the middle of these new stitches).
Right front piece:
Knit 2 together (= 1 stitch decreased), knit until 7th marker (= 60-68-74-76-88-98 stitches), 1 yarn over (= 1 stitch increased), 6 band stitches in garter stitch (including stitch with marker = 68-76-82-84-96-106 stitches) = 277-309-333-349-397-437 stitches in total (= 72-80-86-90-102-112 stitches on each front piece and 133-149-161-169-193-213 stitches on back piece).
Work 1 row from wrong side, do not work yarn overs twisted to avoid holes AT THE SAME TIME increase 5-0-0-0-0-0 stitches evenly before marker under first sleeve, 5-0-0-0-0-0 stitches evenly before tip mid back, 5-0-0-0-0-0 stitches evenly before marker under next sleeve and 5-0-0-0-0-0 stitches evenly before band mid front – read INCREASE TIP-1 = 20-0-0-0-0-0 stitches increased in total = 297-309-333-349-397-437 stitches.
Now slip stitches on 3 stitch holders while at the same time working them from right side (i.e. work from left front piece over back piece and to right front piece) as follows:
Knit until 20-20-23-21-24-28 stitches remain before marker thread under sleeve, then slip them on stitch holder number 1 (= 57-60-63-69-78-84 stitches slipped on 1st stitch holder), knit the next 20-20-23-21-24-28 stitches (= until marker thread), work 2 stitches in next stitch (= 1 stitch increased), knit the next 19-19-22-20-23-27 stitches (work first domino square on left front piece/back piece over these 41-41-47-43-49-57 stitches and keep them therefore on needle), knit until 20-20-23-21-24-28 stitches remain before marker thread under right sleeve, then slip them on stitch holder number 2 (= 103-109-115-127-145-157 stitches on 2nd stitch holder), knit 19-19-22-20-23-27, work 2 stitches in next stitch (= 1 stitch increased), knit 20-20-23-21-24-28, leave stitches on needle (work first domino square on right front piece/back piece over these 41-41-47-43-49-57 stitches), knit the rest of row, then slip them on stitch holder number 3 (= 57-60-63-69-78-84 stitches on 3rd stitch holder).Cut and fasten the thread.
Stitches are now slipped on 3 stitch holders, 57-60-63-69-78-84 stitches in each side of piece, 103-109-115-127-145-157 stitches in the middle of piece and 41-41-47-43-49-57 stitches on needle in each side of piece (= mid under sleeves).

DOMINO SQUARES:
See chart below, numbers on chart describe which domino square you are working. First work 1 domino square mid under right sleeve (= 1.1). Then work 1 and 1 domino square. Work domino squares with 2 double pointed needles size 3.5 mm. Pick up stitches with blue lagoon. Work all domino squares in STRIPES – see explanation above, (i.e. work first row in lagoon from wrong side, change colour to light pearl grey and then work stripes).

RIGHT FRONT/BACK PIECE:
1ST ROW WITH DOMINO:
DOMINO 1.1:
Now work WHOLE DOMINO SQUARE – see explanation above, over the 41-41-47-43-49-57 stitches under right sleeve.

2ND ROW WITH DOMINO:
DOMINO 2.1:
Slip the last 15-16-17-19-24-26 stitches from stitch holder towards mid front/mid back back on double pointed needles 3.5 mm and pick up 16-17-18-20-25-27 stitches – read KNITTING TIP, on half right side of 1st domino square (pick up more stitches in right side of 1st domino square on 3rd row with domino square later) = 31-33-35-39-49-53 stitches. Work the whole domino square.

DOMINO 2.2:
Pick up 16-17-18-20-25-27 stitches from middle of left side (= half side) of 1st domino square (= towards mid front/mid back), and slip the first 15-16-17-19-24-26 stitches from stitch holder towards mid front/mid back back on double pointed needles size 3.5 mm = 31-33-35-39-49-53 stitches. Work the whole domino square.
Now there is 2 whole domino squares on 2nd row with domino, i.e. 1 domino on each side of the 1st domino square has been worked.

3RD ROW WITH DOMINO:
DOMINO 3.1:
Slip the next 17-18-19-21-24-26 stitches from stitch holder towards mid back/mid front back on double pointed needles 3.5 mm and pick up 18-19-20-22-25-27 stitches in right side of domino square 2.1 = 35-37-39-43-49-53 stitches. Work whole domino square.
DOMINO 3.2:
Pick up 18-19-20-22-25-27 stitches in left side of domino square 2.1 and pick up 17-18-19-21-24-26 stitches on last half in right side of 1st domino square = 35-37-39-43-49-53 stitches. Work whole domino square.
DOMINO 3.3:
Pick up 17-18-19-21-24-26 stitches in last half on left side of 1st domino square and pick up 18-19-20-22-25-27 stitches in right side of domino square 2.2 = 35-37-39-43-49-53 stitches. Work whole domino square.
DOMINO 3.4:
Pick up 18-19-20-22-25-27 stitches in left side of domino square 2.2 and slip the next 17-18-19-21-24-26 stitches from stitch holder towards mid front/mid back back on double pointed needles size 3.5 mm = 35-37-39-43-49-53 stitches. Work whole domino square.
4 domino squares have been worked on 3rd row with domino.

LEFT FRONT/BACK PIECE:
Work 1st to 3rd row with dominos as on right front/back piece.
Now work dominos over both left front piece/back piece and right front piece/back piece. Begin to work dominos over left front piece, then left back piece, right back piece and then right front piece as explained below and as numbers on chart show.

4TH ROW WITH DOMINO:
DOMINO 4.1:
Slip the next 19-20-21-23-24-26 stitches from stitch holder towards mid front back on double pointed needles 3.5 mm and pick up 20-21-22-24-25-27 stitches in right side of domino square 3.1 = 39-41-43-47-49-53 stitches. Work whole domino square. Now 6 stitches remain on stitch holder towards mid front.
DOMINO 4.2 TO 4.4:
Pick up 19-20-21-23-24-26 stitches in one side of domino square from 3rd row and pick up 20-21-22-24-25-27 stitches in one side of next domino square from 3rd row = 39-41-43-47-49-53 stitches. Work whole domino square.
DOMINO 4.5:
Pick up 19-20-21-23-24-26 stitches in left side of domino square 3.4 and slip the next 20-21-22-24-25-27 stitches from stitch holder towards mid back back on double pointed needles size 3.5 mm = 39-41-43-47-49-53 stitches. Work whole domino square.
DOMINO 4.6:
Slip the last 19-20-21-23-24-26 stitches from stitch holder mid back back on double pointed needles 3.5 mm and pick up 20-21-22-24-25-27 stitches in right side of domino square 3.1 = 39-41-43-47-49-53 stitches. Work whole domino square.
DOMINO 4.7 TO 4.9:
Pick up 19-20-21-23-24-26 stitches in one side of domino square from 3rd row and pick up 20-21-22-24-25-27 stitches in one side of next domino square from 3rd row = 39-41-43-47-49-53 stitches. Work whole domino square.
DOMINO 4.10:
Pick up 20-21-22-24-25-27 stitches in left side of domino square 3.4 and slip the next 19-20-21-23-24-26 stitches from stitch mid front back on double pointed needles size 3.5 mm = 39-41-43-47-49-53 stitches. Work whole domino square. Now 6 stitches remain on stitch holder towards mid front.
10 domino squares have been worked on 4th row with domino.

5TH ROW WITH DOMINO:
DOMINO 5.1:
Pick up 21-22-23-25-27-29 stitches in right side of domino square 4.1 and work HALF DOMINO SQUARE (vertical) – see explanation above.
DOMINO 5.2 TO 5.10:
Pick up 21-22-23-25-27-29 stitches in one side of domino square from 4th row and pick up 22-23-24-26-28-30 stitches in one side of next domino square from 4th row = 43-45-47-51-55-59 stitches. Work whole domino square.
DOMINO 5.11:
Pick up 21-22-23-25-27-29 stitches in left side of domino square 4.10 and work half domino square (vertical).
9 whole domino squares and 2 half domino squares (vertically) have been worked on 5th row with domino.

6TH ROW WITH DOMINO:
DOMINO 6.1 TO 6.10:
Pick up 21-22-23-25-27-29 stitches in one side of domino square from 5th row and pick up 22-23-24-26-28-30 stitches in one side of next domino square from 5th row = 43-45-47-51-55-59 stitches. Work whole domino square.
10 domino squares have been worked on 6th row with domino.

7TH ROW WITH DOMINO:
DOMINO 7.1 TO 7.9:
Pick up 21-22-23-25-27-29 stitches in one side of domino square from 6th row and pick up 22-23-24-26-28-30 stitches in one side of next domino square from 6th row = 43-45-47-51-55-59 stitches. Work HALF DOMINO SQUARE (horizontal) - see explanation above.
9 half domino squares have been worked (horizontally) on 7th row with domino. On each domino 23-23-25-27-29-31 stitches have been slipped on a stitch holder (work an edge over these stitches later).
Fasten all yarns.

LEFT BAND:
Work band in blue lagoon.
Slip the 6 stitches from stitch holder in left side of piece back on double pointed needles size 3.5 mm. Work in garter stitch back and forth for approx. 13-14-14-15-17-18 cm, adjust measurement to domino square mid front (= domino square 5.1). Then work short rows over band stitch, begin from right side as follows:
ROW 1: Work until 1 stitch remains, turn piece.
ROW 2: Slip 1 stitch knitwise, tighten yarn and work back.
ROW 3: Work until 2 stitches remain, turn piece.
ROW 4: Work as 2nd row.
ROW 5: Work until 3 stitches remain, turn piece.
ROW 6: Work as 2nd row.
ROW 7: Work until 4 stitches remain, turn piece.
ROW 8: Work as 2nd row.
Insert 1 marker in band, NOW MEASURE PIECE FROM HERE!
Then work in garter stitch over all stitches. When band measures 9-10-10-11-12-13 cm from marker (adjust measurement according to domino 6.1) slip stitches on a stitch holder.
Sew band to domino square 5.1 and 6.1 in outermost loop of edge stitch.

RIGHT BAND:
Work as left band, but sew the first 13-14-14-15-17-18 cm to domino square 5.11. Work the short rows over band stitches as on left band but begin from wrong side. Sew the last 9-10-10-11-12-13 cm to domino square 6.10. Slip stitches on a stitch holder. Sew band to domino square 5.11 and 6.10 in outermost loop of edge stitch.

EDGE:
Work edge in blue lagoon.
Band (= 6 stitches) in each side of piece has been slipped on stitch holders and every domino has 23-23-25-27-29-31 stitches slipped on stitch holder = 219-219-237-255-273-291 stitches in total on stitch holders. Slip stitches back on circular needle size 3.5 mm.
Work 2 ridges AT THE SAME TIME on first row (= from right side) increase 4-6-6-7-6-7 stitches evenly over every half domino square (= 27-29-31-34-35-38 stitches on every domino = 36-54-54-63-54-63 stitches increased in total) – read INCREASE TIP-2 = 255-273-291-318-327-354 stitches in total. NOTE! If the edge is tight, increase more stitches in every domino. Loosely cast off.

SLEEVE:
Work sleeves in blue lagoon.
Slip the 72-76-80-82-90-92 stitches from stitch holder back on double pointed needles size 3.5 mm and pick up 1 stitch in each of the 8-8-8-12-12-12 stitches cast on under sleeve = 80-84-88-94-102-104 stitches. Insert 1 marker in the middle of the new stitches under the sleeve. Work sleeves in the round in GARTER STITCH - see explanation above.
When piece measures 2 cm, decrease 1 stitch on each side of marker (= 2 stitches decreased) - read DECREASE TIP. Decrease like this every 9th-8th-8th-7th-6th-5th round 16-17-17-19-22-22 times in total = 48-50-54-56-58-60 stitches. When piece measures 35-33-33-32-31-30 cm, adjust so that last round is purled. Work 4 ridges in stripes, work first stripes in light pearl grey.
Cast off, make sure to avoid a tight cast-off edge, cast off with 1 larger needle size if needed. Sleeve measures approx. 37-35-35-34-33-32 cm from where sleeve was divided from body. Work the other sleeve the same way.

ASSEMBLY:
Sew on buttons on left band.

Diagram

symbols = first number shows which row you are on and second number shows with domino it is on row - see explanation in pattern
symbols = mid back, chart is drawn top down, the way garment is worked
symbols = mid front
symbols = knitting direction
symbols = slip sleeve stitches on stitch holder here
symbols = mid back
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 188-14

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (14)

country flag PATRIZIA wrote:

Avorare a diritto fino a quando rimangono 20-20-23-21-24-28 maglie prima del segnapunti sotto la manica sinistra, poi trasferirle sul fermamaglie n° 1 da qua in poi non capisco quante maglie devo tyrasferire totali sui 3 fermaglie ...si parla di 3 fermagli ma poi facendo la somma delle singole parti diventano 5 ......mi sono persa sono giorni che leggo e rileggo ma non trovo soluzione grazie

27.05.2021 - 09:10

DROPS Design answered:

Buonasera Patrizia, i fermamaglie sui cui trasferire le maglie sono 3, e il passaggio e ben descritto: se segue fedelmente le indicazioni riuscirà a impostare il lavoro. Buon lavoro!

29.05.2021 - 14:46

country flag Patrizia wrote:

Qualcuno mi può aiutare x favore con la divisione dei punti sui 3 fermamaglie per iniziare con il domino ?non riesco proprio a capire come fare ..grazie sin da ora

26.05.2021 - 22:05

DROPS Design answered:

Buonasera Patrizia, ci può spiegare esattamente in quale punto riscontra difficoltà? Buon lavoro!

27.05.2021 - 00:08

country flag Tikva wrote:

Guten Tag,\r\nich möchte die Jacke für eine Frau mit Brustumfang 144 (ohne Zugaben) stricken, gibt es für diese Größe eine Berechnung, ebenfalls um die Jacke etwas in der Länge zu vergrößern, da ich bei der Größe der Frau eine deutlich längere Jacke für angebracht halte. Ich wäre sehr dankbar, wenn Sie mir auf die o.g. Maße eine Anleitung geben könnten. DANKE SEHR.

28.01.2020 - 13:03

DROPS Design answered:

Liebe Tikva, leider können wir jeder Anleitung nach jedem individuellen Frage anpassen und einzelne Modelle auf individuellen Wunsch hin umrechnen. Wenn sie Hilfe damit brauchen, wenden Sie sich bitte an Ihrem DROPS Laden, dort hilft man Ihnen gerne weiter. Viel Spaß beim stricken!

28.01.2020 - 13:26

country flag Marion Jakobsen wrote:

Jeg kan ikke få plads til 2 dominoruder på siden af domino 1.1.

17.10.2018 - 08:04

DROPS Design answered:

Hei Marion. Jeg antar du snakker om langs siden av domino 1.1? Du må tilpasse slik at du strikker opp 16-17-18-20-25-27 masker langs halve ruten. Det vil si at du må strikke opp 2 masker i noen av maskene. God fornøyelse

17.10.2018 - 08:15

country flag Ana Alfonsín wrote:

Muchas gracias por el patrón, mis alumnas lo están disfrutando como niñas!!

09.05.2018 - 22:18

country flag Anna wrote:

Ser meget spændende ud

17.02.2018 - 20:48

country flag Anne Curtis wrote:

Love the design, cannot wait for the pattern to start knitting!

08.02.2018 - 08:47

country flag Dubuisson Maud wrote:

Bonjour, je trouve ce gilet très original (le dégradé de couleur) quand aurons-nous les explications du modèle ? Merci

01.02.2018 - 18:14

country flag Patricia wrote:

Superbe !!! Quand pourra t-on avoir les explications ?

19.01.2018 - 16:06

country flag Judit Maruzsi wrote:

I would love to knit this one! I hope that this pattern will be published!

19.01.2018 - 10:31