DROPS / 186 / 1

Blushing Beauty by DROPS Design

Knitted jumper with lace pattern. Sizes S - XXXL. The piece is worked in 2 strands DROPS Air or you can use 2 strands DROPS Brushed Alpaca Silk.

DROPS Design: Pattern no ai-106
Yarn group C + C or E
-----------------------------------------------------------
Sizes: S - M - L - XL - XXL - XXXL
Materials:
DROPS AIR from Garnstudio (belongs to yarn group C)
300-350-400-400-450-500 g colour 20, rose

Or use:
DROPS BRUSHED ALPACA SILK from Garnstudio (belongs to yarn group C)
175-200-225-225-250-275 g colour 06, coral

The piece can also be knitted with yarn from:
"Alternative yarn (Yarn group C)" – see link below.

DROPS CIRCULAR NEEDLE (80 cm) SIZE 9 MM – or the size needed to get 10 stitches and 14 rows stocking stitch with 2 strands on 10 cm in width and 10 cm in height.

DROPS CIRCULAR NEEDLE (80 cm) SIZE 8 MM for rib - or the size needed to get 11 stitches and 15 rows stocking stitch with 2 strands on 10 cm in width and 10 cm in height.
----------------------------------------------------------

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (37)

65% Alpaca, 28% Polyamide, 7% Wool
from 3.00 £ /50g
DROPS Air mix DROPS Air mix 3.00 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Air uni colour DROPS Air uni colour 3.00 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 18.00£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
INFORMATION FOR THE PATTERN:

RIDGE/GARTER STITCH (worked back and forth):
1 ridge = Knit 2 rows.

PATTERN:
See diagrams A.1 and A.2. Choose diagram for your size.
The diagram shows all the rows in the pattern from the right side.

DECREASE TIP (for neck):
Decrease for neck inside the 2 edge stitches in garter stitch. All decreases are made from the right side!
Decrease as follows after the 2 edge stitches: Slip 1 stitch as if to knit, knit 1, pass the slipped stitch over the knitted stitch.
Decrease as follows before the 2 edge stitches: Knit 2 together.

INCREASE TIP (for sleeve):
Increase 1 stitch inside 1 edge stitch in garter stitch by making 1 yarn over. On next row work the yarn over twisted to avoid a hole.
----------------------------------------------------------

JUMPER:
The piece is worked back and forth with circular needle. Front and back pieces are worked separately. The sleeves are worked back and forth with circular needle.

BACK PIECE:
Cast on 47-47-53-59-65-71 stitches with circular needle size 8 mm and 2 strands Air or 2 strands Brushed Alpaca Silk. Purl 1 row from the wrong side. Then work 4 rows rib (= knit 1 / purl 2) with 1 edge stitch in GARTER STITCH - see description above, in each side. Change to circular needle size 9 mm. On the next row work and decrease as follows - from the right side: Work 6-6-6-9-9-9 stitches in garter stitch - and decrease 1-0-1-1-1-1 stitch over these stitches, * A.1 (= 11-11-13-13-15-17 stitches), 1 stitch in garter stitch *, work from *-* a total of 2 times, work A.1 (= 11-11-13-13-15-17 stitches), 6-6-6-9-9-9 stitches in garter stitch - and decrease 1-0-1-1-1-1 stitch over these stitches = 45-47-51-57-63-69 stitches. Continue the pattern like this - REMEMBER THE KNITTING TENSION!
When the piece measures 34-35-36-37-38-39 cm (measure along the one stitch in garter stitch between 2 repeats of A.1) cast off 3 stitches at the beginning of the next 2 rows = 39-41-45-51-57-63 stitches.
When the piece measures approx. 42-44-46-47-49-51 cm - adjust so that you have worked the last row in the diagram, work A.2 (= 11-11-13-13-15-17 stitches) over A.1 to finished length. AT THE SAME TIME when the piece measures 49-51-53-55-57-59 cm work 2 ridges over the middle 13-13-15-15-15-15 stitches on the row; the other stitches are worked as before. On the first row from the right side after the 2 ridges, cast off the middle 9-9-11-11-11-11 stitches for neck. Place the 15-16-17-20-23-26 stitches on the right side of the row (seen from the right side) on 1 thread or leave them un-worked on a needle.
Continue with pattern back and forth over the remaining 15-16-17-20-23-26 stitches and 2 edge stitches in garter stitch towards the neck - AT THE SAME TIME on the next row from the right side, decrease 1 stitch for the neck - read DECREASE TIP = 14-15-16-19-22-25 stitches on needle. Continue working until piece measures 52-54-56-58-60-62 cm. Then loosely cast off. Work the other shoulder in the same way.

FRONT PIECE:
Cast on and work in the same way as the back piece until the piece measures 40-42-44-45-47-49 cm. Now work 2 ridges over the middle 11-11-13-13-13-13 stitches on the row, the other stitches are worked as before. On the first row from the right side after the 2 ridges, cast off the middle 7-7-9-9-9-9 stitches for neck. Place 16-17-18-21-24-27 stitches on the right side of the row (seen from the right side) on 1 thread or leave them un-worked on a needle.

READ THE WHOLE OF THE NEXT SECTION BEFORE CONTINUING:
Continue back and forth with pattern over the remaining 16-17-18-21-24-27 stitches and 2 edge stitches in garter stitch towards the neck. On the next row from the right side, decrease for neck - remember DECREASE TIP. Decrease like this every 2nd row a total of 2 times = 14-15-16-19-22-25 stitches on needle. AT THE SAME TIME work A.1 up to and including the last row in the diagram, then work A.2 (= 11-11-13-13-15-17 stitches) over A.1 to finished length.
Continue working until piece measures 52-54-56-58-60-62 cm. Then loosely cast off. Work the other shoulder in the same way.

SLEEVE:
Cast on 17-17-20-20-20-23 stitches (including 1 edge stitch in each side) with circular needle size 8 mm and 2 strands Air or 2 strands Brushed Alpaca Silk. Purl 1 row from the wrong side. Then work 6 rows rib (= knit 1 / purl 2) with 1 edge stitch in garter stitch in each side. Change to circular needle size 9 mm. The next row is worked as follows - from the right side: Work 1 edge stitch in garter stitch, * knit 1, 1 yarn over *, work from *-* until there are 2 stitches left, knit 1 stitch and work 1 edge stitch in garter stitch = 31-31-37-37-37-43 stitches (on the next row, work the yarn overs twisted to avoid holes). Knit 1 row from the wrong side where you increase 2-4-0-2-4-0 stitches evenly on row = 33-35-37-39-41-43 stitches.
The next row is worked as follows - from the right side: 1 edge stitch in garter stitch, purl 10-11-11-12-12-12 (knit from wrong side), A.1 (= 11-11-13-13-15-17 stitches), purl 10-11-11-12-12-12 stitches (knit from wrong side) and 1 edge stitch in garter stitch. Continue the pattern like this. When the piece measures 14 cm increase 1 stitch in each side - read INCREASE TIP (= 2 stitches increased). Increase like this every 16-16-15-14-13-12 cm a total of 3 times = 39-41-43-45-47-49 stitches. Continue working until piece measures 51-50-49-47-45-43 cm (shorter measurements in larger sizes due to broader shoulders). Then loosely cast off. Work the other sleeve in the same way.

ASSEMBLY:
Sew shoulder seams inside the cast-off edge – make sure the seam is not tight. Sew the side seams in the outermost loop of the outermost stitch. Sew in the sleeves – sew the 2 cm on each side of sleeve so that it fits into the armhole, then sew the sleeve seams inside the 1 edge stitch.

Diagram

= knit from right side, purl from wrong side
= between 2 stitches make 1 yarn over
= slip 1 stitch as if to knit, knit 2 together, pass the slipped stitch over the knitted together stitches


Ida 26.11.2018 - 21:37:

Takk for svar. Men etter at man har felt av tre masker i hver side til erme, er det kun to masker igjen i rille på hver side, så jeg får det fortsatt ikke til å stemme

DROPS Design 30.11.2018 kl. 14:02:

Hei Ida. Genseren på bilder er nok strikket i str M, og da sitter du igjen med 3 rillemasker etter å ha felt av 3 masker til erme. Det er 3 rillemasker du kan se på bildet i tillegg til sømmen for ermet. God fornøyelse.

Ida Sofie Bergen 24.11.2018 - 22:59:

På bildet er det en type struktur øverst på ermet som ikke er glattstrikk/mønster. Men hvis man følger oppskriften, ser det ikke ut til at man får slik struktur som på bildet, er det riktig?

DROPS Design 26.11.2018 kl. 09:16:

Hei Ida. Det strikkes riller i hver ende av forstykke og bakstykket oppover og det er nok disse du sikter til. God fornøyelse

Evelyne 31.10.2018 - 17:09:

Je voudrais faire ce modèle avec un seul fil car je n'aime pas les pull épais. Comment adapter le modèle?

DROPS Design 01.11.2018 kl. 13:56:

Bonjour Evelyne, vous pouvez tricoter ce pull avec 2 fils Air (= groupe C) ou 1 fil du groupe E (voir alternatives - mais sur la base du même échantillon, soit 10 m x 14 rangs = 10 x 10 cm en jersey. Nous ne sommes malheureusement pas en mesure de pouvoir ajuster ce modèle pour une autre tension, il vous faudra recalculer en fonction de votre échantillon si besoin, ou bien rechercher parmi les modèles correspondant à la tension souhaitée à l'aide de notre moteur de recherches. Bon tricot!

Mette Kragh 30.10.2018 - 13:01:

Når jeg strikker blusen i Drops Brushed Alpha sink, skal jeg vel kun bruge én tråd?

DROPS Design 30.10.2018 kl. 15:58:

Hei Mette, For å få riktige strikkefasthet må du bruke 2 tråder av garn som hører til gruppe C eller en tråd av garn som hører til gruppe E. Drops Brushed Alpaca Silk er gruppe C så du må derfor bruke 2 tråder. God fornøyelse!

Marianne 27.10.2018 - 22:49:

Jeg strikker trøjen i str L og Jeg bliver lidt i tvivl når der i opskriften under afsnittet om bagstykket står i slutningen af det første afsnit at jeg "skal fortsætte mønstret således" jeg skal vel ikke fortsætte med at tage en maske ind i hver side men nu i stedet strikke 5 retmasker 3*mønster og afslutte med 5 retmasker. Det jeg spørg om er om jeg ikke skal fortsætte med at have 51 masker?

DROPS Design 05.11.2018 kl. 08:48:

Hei Marianne. Ja, det var en litt uheldig formulering. Du skal fortsette med mønsteret som forklart, men du skal felle masker kun den første gangen. God fornøyelse.

Eva Hansen 27.09.2018 - 15:26:

Hei! Jeg lurer på hva som menes med " 2 kantmasker i rille mot hals "

DROPS Design 28.09.2018 kl. 15:09:

Hej Eva, de 2 yderste masker mod halsen strikkes i rille/ret på hver pind, du kan også se det på billedet. God fornøjelse!

Ann-Mari Rasmuson 21.08.2018 - 08:46:

I want to knit this jumper in a uk size 12 for my granddaughter. Is that size M?

DROPS Design 21.08.2018 kl. 08:59:

Dear Mrs Ann-Mari. You can check measurements for each size in the diagram at the bottom of the pattern. Measurements are given in cm. Happy knitting!

Malin 04.08.2018 - 11:28:

Etter å ha strikket vrangborden på ermet så står det at man skal strikke «1kantmaske, *1 r, 1 kast* og at kastene på neste omgang skal strikkes vridd, MEN det står ingen ting om omgangen skal strikkes rett eller vrang. Hvordan skal det strikkes her?

DROPS Design 17.08.2018 kl. 13:15:

Hei Malin. Du skal strikke neste omgang rett fra vrangen (vrang fra retten), alle kastene strikkes vridd, og det økes 2-4-0-2-4-0 masker jevnt fordelt. Videre strikkes det vrang (sett fra retten) og mønster etter A.1 som forklart i oppskriften. God fornøyelse.

Marita 02.08.2018 - 21:04:

Hei! Skal plagget være på retten eller vrangen når det sys sammen?

DROPS Design 17.08.2018 kl. 13:09:

Hei Marita. Du kan sy sammen fra rettsiden. Her er en video som viser hvordan man gjør dette. God fornøyelse.

Nadine22 15.07.2018 - 11:23:

Bonjour Je reviens vers vous concernant ce modèle car je ne comprends pas du tout ce que je dois faire concernant les diminutions du devant aprés avoir rabattues les 13 mailles centrales. Merci de me venir en aide Bien cordialement

DROPS Design 16.07.2018 kl. 08:51:

Bonjour Nadine22, on ne rabat pas les 13 m centrales pour l'encolure devant ou dos, on tricote au point mousse sur les 13 m centrales (taille S et M) du dos et on rabat les 9 m centrales pour l'encolure dos - et on tricote au point mousse sur les 13 m centrales (4 grandes tailles) pour l'encolure devant et on rabat les 9 m centrales pour l'encolure. Quand ces mailles sont rabattues, placez les mailles de l'épaule gauche en attente et tricotez l'épaule droite comme indiqué, puis coupez le fil et tricotez l'épaule gauche comme pour l'épaule droite mais en sens inverse. Bon tricot!

Post a comment to pattern DROPS 186-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.