DROPS / 183 / 23

Queen of Hearts by DROPS Design

Set consists of: Hat and mittens with hearts. Piece is knitted in DROPS Fabel.

DROPS design: Pattern fa-383
Yarn group A
----------------------------------------------------------
For entire set use approx. 100 g colour 400, black and 100 g colour 916, grand canyon.
----------------------------------------------------------

HAT:
Size: XS/S - M/L
Head circumference: 52/54 - 56/58 cm
Materials:
DROPS FABEL from Garnstudio (belongs to yarn group B)
50 g colour 400, black
50 g colour 916, grand canyon

Piece can also be knitted with yarn from:
“Alternative yarn (yarn group A)” - see link below.

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 cm) SIZE 2.5 mm – or size needed to get 26 stitches and 34 rows in stocking stitch = width 10 cm and 10 cm vertically.

DROPS CIRCULAR NEEDLE (40 cm) SIZE 2 mm for rib – or size needed to get 29 stitches and 38 rows in stocking stitch = width 10 cm and 10 cm vertically.
----------------------------------------------------------

MITTENS:
Size: one-size
Materials:
DROPS FABEL from Garnstudio (belongs to yarn group A)
50 g colour 400, black
50 g colour 916, grand canyon

Piece can also be knitted with yarn from:
“Alternative yarn (yarn group A)” - see link below.

DROPS DOUBLE POINTED NEEDLES SIZE 2.5 mm – or size needed to get 26 stitches and 34 rows in stocking stitch = width 10 cm and 10 cm vertically.

DROPS DOUBLE POINTED NEEDLES SIZE 2 mm for rib – or size needed to get 29 stitches and 38 rows in stocking stitch = width 10 cm and 10 cm vertically.

----------------------------------------------------------

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

75% Wool, 25% Polyamide
from 2.20 £ /50g
DROPS Fabel uni colour DROPS Fabel uni colour 2.20 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Fabel print DROPS Fabel print 2.30 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Fabel long print DROPS Fabel long print 2.50 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 8.80£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
INFORMATION FOR PATTERN:

MAGIC CIRCLE:
To avoid hole in the middle beg with this technique:
Hold yarn end in the left hand and make a loop around left index finger (from left to right). Hold the loop with left thumb and index finger. Insert needle through loop, get yarn from ball (i.e. place yarn 1 time over needle from you), pull yarn back through loop, 1 yarn over (now place yarn from the back and towards you) and pull yarn over through stitches on needle, * insert needle through loop, 1 yarn over (place yarn from the back and towards you), pull yarn over through loop, 1 yarn over (from the back and towards you) and pull yarn over through outermost stitch on right needle (i.e. the last stitch made) *, repeat from *-* until there are 8 stitches on needle. Distribute stitches on 4 double pointed needles size 2.5 mm as explained in pattern.
Then work as explained in pattern – AT THE SAME TIME pull yarn end so that loop is tighten tog and the hole disappears.

PATTERN:
See diagrams A.1 to A.5. Diagrams show all rows in pattern seen from the right side. See diagrams A.1 and A.2 - choose diagram for your size.
----------------------------------------------------------

HAT:
Worked in the round on circular needle, switch to double pointed needles when decreasing at the top of hat. Due to the pattern on the hat, it is available in sizes XS/S and M/L. Should you wish to make a size S/M (fits head size 54/56 cm) you can follow instructions for XS/S but increase ½ needle size.

Cast on 128-152 stitches on circular needle size 2 mm with black and knit 1 round. On next round work rib knit 2 and purl 2 until piece measures approx. 4 cm. Switch to circular needles size 2.5 mm, knit 1 round while decreasing 8 stitches evenly on round = 120-144 stitches. Work diagram A.1 (pattern in diagram is divisible with 8 stitches, but since the diagrams should fit above each other you must start on different part of the pattern depending on size). Work A.1 3-6 times in width. REMEMBER THE KNITTING TENSION! Work diagram 3 times vertically, piece measures approx. 17 cm. Then work A.2 over A.1. When diagram has been worked vertically, 12 stitches remain on needle. Knit stitches together 2 by 2 = 6 stitches. Cut the yarn. Pull yarn through the remaining stitches a couple of times and fasten.

----------------------------------------------------------

MITTENS:
Work mittens in the round on double pointed needles. Work hand from fingers and upwards to thumb gusset. Thumb is worked in the round from the top before casting off for thumb gusset and slip it together with the rest of mitten. Then continue in the round.

MITTEN PART 1:
Start with black and MAGIC CIRCLE - see explanation above = 8 stitches distributed on 4 double pointed needles 2.5 mm - NOTE: If you do not want to start with a magic circle cast on 8 stitches with black (when mitten is done baste a yarn up and down through stitches around hole at the tip and tighten tog).
Then work pattern in the round according to diagram A.3 for left mitten and A.4 for right mitten. When increases in diagram are done, there are 56 stitches on round. REMEMBER THE KNITTING TENSION! Continue until round marked with arrow in diagram (piece measures approx. 12 from tip), on this round cast off 3 stitches for thumb gusset (the black squares in diagram shows where to cast off). Put mitten aside and work the thumb.

THUMB:
Start with black and MAGIC CIRCLE = 8 stitches distributed on double pointed needles 2.5 mm. Work in the round according to diagram A.5. When increases in diagram are done, there are 20 stitches on round. On last round in diagram cast off 3 stitches for thumb gusset on round (the black squares in diagram shows where to cast off). 17 stitches remain on thumb. The thumb is now done.

MITTEN PART 2:
Now work thumb together with mitten, place thumb on needles where stitches for thumb gusset were cast off on mitten. Continue in the round according to diagram A.3/A.4 over stitches on mitten as before, skip the black squares, here work diagram A.6 (= thumb gusset). Star in A.6 should fit star in A.5 to continue pattern. When diagram A.6 is done, there are 56 stitches on round. Continue according to A.3/A.4. When diagram has been worked, switch to double pointed needle size 2 mm and knit 1 round, then work rib knit 2 and purl 2 for 5 rounds. Loosely cast off stitches with K over K and P over P. Sew the opening between thumb and mitten. Cut the yarn and fasten yarn ends.

This pattern has been corrected. .

Updated online: 27.10.2017
Corrected to circular needle on hat. Added info about sewing opening between thumb and mitten.
Updated online: 06.12.2018
Correction: the symbol for yarn over has been added to symbol definition
Updated online: 10.12.2018
Correction: Due to the pattern on the hat, it is available in sizes XS/S and M/L. Should you wish to make a size S/M (fits head size 54/56 cm) you can follow instructions for XS/S but increase ½ needle size.

Diagram

= black
= grand canyon
= between 2 stitches make 1 yarn over. On next round knit yarn over twisted to avoid holes.
= knit 2 together with black
= slip 1 stitch knitwise, knit 1 with black, pass slipped stitch over stitch worked
= slip 1 stitch knitwise, knit 2 stitches together, pass slipped stitch over stitches worked together
= stitch cast off in A.3, A.4 and A.5. Skip this stitch




Do you need help with this pattern?

Thank you for choosing a DROPS Design pattern. We take pride in providing patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern (DROPS 183-23) for measurements and calculations.

Are you having trouble following the pattern? See below for a list of resources to help you finish your project in no time - or why not, learn something new.

We have also step-by-step guides for different techniques which you'll find here.

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

to top

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

to top

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

to top

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

to top

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

to top

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

to top

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

to top

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

to top

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

to top

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

to top

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

to top

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

to top

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

to top

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

to top

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

to top

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

to top

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

to top

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

to top

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

to top

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

to top

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

to top

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

to top

Have you purchased DROPS yarn to make this pattern? Then you are entitled to receive help from the store where you bought the yarn. Find a list of DROPS stores here!
Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days. In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

Comments / Questions (8)

Ingamay Granberg 14.03.2019 - 14:12:

Ska man verkligen sticka vanten uppå ned och hur kan man börja jag fattar noll

DROPS Design 25.03.2019 kl. 11:49:

Hei Ingamay. Ja, denne votten strikkes rundt, fra tuppen og ned til håndleddet. Du begynner med å legge opp 8 masker med sort og magisk sirkel (om du ikke vil strikke magisk sirkel kan du legge opp vanlig og snurpe igjen hullet senere). Videre følger du diagram A.3 - diagrammet leses på vanlig måte (nedenfra og opp, fra høyre mot venstre). Du strikker altså 1 omgang slik: 1 maske grand canyon, 1 kast, 1 sort, 1 kast, 1 grand canyon, 1 sort, 1 grand canyon, 1 kast, 1 sort, 1 kast, 1 grand canyon. God fornøyelse.

Pirjo Ylikarjula 09.02.2019 - 08:20:

Min mössa blev så liten. Största storleken passar inta vuxen.Vad ska man ändra på?

Line 09.12.2018 - 01:03:

Der må altså være et eller andet helt glat med maskeantallet, som Malin og Rebecka også nævner. Min hue kommer i hvert fald kun til at passe et barn! Men altså 120m/26m*10cm giver jo heller ikke 56 cm som står som hovedmål.

DROPS Design 10.12.2018 kl. 10:03:

Hej Line, vælg den største størrelse, så skal vi se på den mindste størrelse en gang til :)

Line 05.12.2018 - 23:45:

I diagrammet er angivet, hvad jeg antager er en udtagning, men hvordan skal denne strikkes, for det står ikke nævnt i symbolforklaringen.

DROPS Design 06.12.2018 kl. 08:21:

Hei Line. Her manglet symbolforklaringen for kastene som strikkes annenhver omgang (de hvite ovalene). Denne er nå blitt lagt til, og du lager altså 1 kast mellom 2 masker. På neste omgang strikkes kastet vridd rett for å unngå hull. Takk for beskjed og god fornøyelse

Anne Blundell 28.08.2018 - 15:18:

Thanks so much for taking the time to answer my quaestion, much appreciated.

Anne Blundell 25.08.2018 - 14:07:

Can the hat pattern be adapted to knit straight on two needles? Since I find this much easier than a cisrcular needle

DROPS Design 27.08.2018 kl. 18:52:

Hello Anne. Yes, you can work with straight needles. Just cast on 2 sts more, one each side for the edges. You then follow the instructions as given. The diagram is worked in stocking st. Happy knitting!

Rebecka 28.01.2018 - 19:34:

Jag har precis som Malin stickat en halv vante med fabel på angivna stickor. När jag skickat de första fem raderna med hjärtan så är vanten bara 10 cm istället för 12 och alldeles för smal för en vuxen. Något måste vara fel i mönstret. Har stickat flera olika vantar och sockar efter era mönster men aldrig med det här resultatet.

Malin Bolmhagen 07.01.2018 - 09:04:

Jag har köpt samma garn och samma storlek på stickorna som i beskrivningen. Jag följde mönster för mössa S/M som passade till ett barn 4/5 år och vanten blev oxå i barnstorlek!

Post a comment to pattern DROPS 183-23

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.