Margaretha Parmann wrote:
Står brett avfellingskanten dobbel- er det hele delen med striper ?
19.03.2024 - 22:01DROPS Design answered:
Hei Margaretha, Dette betyr at du legger den ene sida av tøffelen oppe på den andre, slik at du kan sy sømmen nedover hælen. God fornøyelse!
20.03.2024 - 07:56Christina wrote:
Da jeg er allergisk overfor uld fra får. Kan jeg da bruge Puna istedet?
05.11.2019 - 12:43DROPS Design answered:
Hei Christina. DROPS Puna er 100% ull fra Alpaca og så lenge du ikke er allergisk mot alpaca ull skulle det gå greit, men jeg ville ha testet med en liten prøve før jeg bega meg på et stort prosjekt. God Fornøyelse!
11.11.2019 - 09:19Ana Clerins wrote:
Once I start with grey&white stripes, I place a marker after the first 12 stitches. The I knit in garter. What do I do with thise 12 stitches, leave them to wait and not knit or cast off or knit in garter stitch
11.01.2019 - 21:29DROPS Design answered:
Hola Ana. Moviendo el marcapuntos 12 puntos estamos desplazando el inicio de la fila. Después seguimos trabajando sobre todos los puntos ( incluido los 12 puntos)
13.01.2019 - 18:16Dorthe wrote:
Skal der strikkes hele vejen rundt fra mærket midt på foden ? Jeg kan ikke se hvordan man skal sy sammen under foden ??? Skal der strikkes i 2 stykker fra mærket til midt bag ??
02.11.2018 - 17:52DROPS Design answered:
Hei Dorthe. Du strikker rundt fra tåen og frem til du setter et merke midt oppå foten (når arbeidet måler ca 13-14-15½ cm.) Videre strikkes det frem og tilbake på pinnen, fra merket midt oppå foten. Det vil si at den delen med striper (hælen) er strikket frem og tilbake. God fornøyelse.
05.11.2018 - 07:57Inger Hiaasen wrote:
Vil gjerne bruke drops eskimo på denne oppskriften, hvordan forholder jeg meg til antall masker pinnestørrelse og mål Kunne også tenkt meg enda en større størrelse (44/46) Blir veldig glad om jeg kunne få svar meget raskt, da jeg ville lage disse som presanger og ikke har så lang tid på meg 1000 takk
03.05.2018 - 12:07DROPS Design answered:
Hej Inger, Vi har flere filtede tøfler i Eskimo, det er bedre du bruger de opskrifter: tovede tøfler
09.05.2018 - 13:54Lisbeth Larsen wrote:
Opskriften passer. Til gengæld passer garnangivelsen IKKE: Der er for lidt af den naturfarvede, hvis man følger farvesammensætningen. Mangler til den ene bagstrop og snørrebånd! Til gengæld er der RIGELIGT i de andre farver, hvor jeg har 2 nøgler af den aqua og 1 nøgle af den havblå til overs. Har hæklet den mindste størrelse. MEN hellere for meget end for lidt! med venlig hilsen Lisbeth
16.02.2018 - 15:24Vibeke Nyrop wrote:
Der er noget der ikke passer i denne opskrift: Der slås 28 masker op og tages 1 maske ud på hver side af begge mærker (= 4 masker taget ud på omgangen) 3-4-4 gange til, hvorefter der tages 1 maske ud før hvert mærke (= 2 masker taget ud på omgangen) 0-0-1 gang = 44-48-50 masker. (for str. 38 bliver det: 28+4x4+0=44m og ikke 48m) Senerre sættes der et mærke midt ovenpå foden efter de første 11-12-13 masker. Er det det korrekte antal masker?
01.11.2017 - 18:30DROPS Design answered:
Hei Vibeke. Det er riktig slik det står i oppskriften. Det står: Tag ud således på hver 2.omgang 3-4-4 gange til, ... Altså; det står beskrevet hvordan du øker og deretter skal du gjøre det 3-4-4 gange til (Totalt 4-5-5 ganger). Da stemmer maskeantallet med hvor merket som settes oppå foten. God Fornøyelse!
02.11.2017 - 14:00Coleen Gray wrote:
When measuring for the length of the slipper, ie "Cast off when the piece measures approx.26-28½ -31½ cm", do you measure from the start of the garter stitch or from the original cast on? I am asking because I don't have anywhere near the same number of stripes as in the picture for this pattern, although my gauge is correct,
29.04.2017 - 13:02DROPS Design answered:
Dear Mrs Gray, this should be total length (= from cast on). Remember to keep same tension when working garter st. Happy knitting!
02.05.2017 - 09:02
Toes and Stripes |
|
|
|
Felted slippers with stripes, worked from the toe backwards in DROPS Lima.
DROPS Extra 0-1362 |
|
RIDGE/GARTER STITCH (worked in the round): 1 ridge = 2 rounds. 1 round knit and 1 round purl. RIDGE/GARTER STITCH (worked back and forth): 1 ridge = 2 rows knit. STRIPES: Work * 1 ridge off white, 1 ridge gray *, repeat from *-* to finished measurements. INCREASE TIP: Increase 1 stitch by making 1 yarn over, on the next round knit the yarn over twisted to prevent holes. ---------------------------------------------------------- SLIPPER: The piece is worked in the round from the toe backwards, then work back and forth over the heel. Sew together mid back and mid front of the toe. Cast on 28 stitches with double pointed needles size 4 mm / US 6 and gray. Knit 1 round and insert 1 marker in the first stitch and 1 marker in the 15th stitch (= the sides). Continue with stockinette stitch AT THE SAME TIME as, on the next round, you increase 1 stitch on each side of both markers (= 4 stitches increased on the round) – READ INCREASE TIP! Increase in this way every 2nd round 3-4-4 more times, then increase 1 stitch before each marker (= 2 stitches increased on the round) 0-0-1 times = 44-48-50 stitches. REMEMBER THE GAUGE! Continue working stockinette stitch until the piece measures 13-14-15½ cm / 5"-5½"-6 1/4''. Work 2 RIDGES in the round – see description above, AT THE SAME TIME as you insert a marker mid top of foot after the first 11-12-13 stitches. Cut the strand. Start after the marker (from the right side) and work STRIPES and RIDGES back and forth – see description above. Bind off when the piece measures approx. 26-28½ -31½ cm / 10 1/4"-11 1/4"-12½" (let the strand end be approx. 20 cm / 8'' long, this is used for assembly). ASSEMBLY: Fold the binding-off edge double and sew together mid back – sew in the outermost stitch so that the seam is not too thick. Sew together the hole at the front of the toe with graft stitches in gray – sew the 14 stitches on top of the foot with the 14 stitches under the foot. Work another slipper in the same way. FELTING: Put the slippers in the washing machine with a detergent without enzymes and optical bleach. Wash hot at 40C/104F with the normal spin and without pre-wash. Afterwards, put the slippers on your feet and shape them to the right measurements while they are still wet. Later, wash the slippers as wool garments. AFTER FELTING: If the piece is not felted enough and is too big: Wash the piece one more time in the washing machine while it is still wet add a terry towel that measures approx. 50 x 70 cm = 19 3/4" x 27 1/2" - NOTE: Do not use a short program. If the piece has been felted too much and is too small: While the piece is still wet stretch it to the correct measurements, if the piece is dry, make sure to soak it first. Remember: All subsequent washes are as a normal wool garment. |
|
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Debbie wrote:
This is a great pattern. It actually works not all the felted slipper pattern do!
27.12.2019 - 01:43