DROPS Belle
DROPS Belle
53% Cotton, 33% Viscose, 14% Linen
from 2.15 $ /50g
Get the yarn to make this pattern from 15.05$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Aegean

Jumper with seamless sleeves and lace pattern, worked top down in DROPS Belle. Sizes S - XXXL.

DROPS 177-24
DROPS Design: Pattern no vs-031
Yarn group B
----------------------------------------------------------
Sizes: S/M – L/XL - XXL - XXXL
Materials:
DROPS BELLE from Garnstudio (belongs to yarn group B)
200-200-250-250 g color 14, light blue
200-200-200-250 g color 15, jeans blue
NOTE: If the piece is worked in one color, there will be sufficient yarn with 350-400-400-450 g Belle.

DROPS CROCHET HOOK SIZE 4 MM / G/6 – or the hook size needed to get 18 double crochets and 9 rows on 10 cm / 4'' in width and 10 cm / 4'' in height –
1 repeat of A.3 should measure 5 cm / 2'' in width and the last 4 rows in the diagram measure 3.5 cm / 1 1/4'' in height.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Belle
DROPS Belle
53% Cotton, 33% Viscose, 14% Linen
from 2.15 $ /50g
Get the yarn to make this pattern from 15.05$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
CROCHET INFO:
At the beginning of each row of double crochet, replace the first double crochet with 3 chain stitches.
At the beginning of each row of single crochet, replace the first single crochet with 1 chain stitch.

PATTERN:
See diagrams A.1 to A.7. Diagrams A.1a and A.1b show how the rows start and finish. Diagrams A.2 and A.4 are used in the sides in sizes S/M and XXL.
----------------------------------------------------------

JUMPER:
The piece is worked in 2 parts which are sewn together.

BACK PIECE:
Right shoulder:
Start with light blue and hook size 4 mm / G/6 and work 62-66-72-77 chain stitches. Turn the piece and work 1 double crochet in the 4th chain stitch from the hook (= 2 double crochets) – READ CROCHET INFO. Work 1 double crochet in each of the next 2-6-5-3 chain stitches, * skip 1 chain stitch, work 1 double crochet in each of the next 6 chain stitches *, repeat from *-* 7-7-8-9 more times = 52-56-61-65 double crochets. Continue from the 2nd row in the diagrams (= row marked with an arrow) and work the pattern for the different sizes from the right side as follows:

Sizes S/M and XXL:
Work A.1b (= 1 stitch), A.3 over the next 45-54 double crochets (= 5-6 repeats), A.4 over the next 5 double crochets (= 1 repeat), A.1a (= 1 stitch). REMEMBER THE CROCHET GAUGE! Work the 3rd row back from the wrong side. Cut the strand.
Sizes L/XL and XXXL:
Work A.1b (= 1 stitch), work A.3 over the next 54-63 double crochets (= 6-7 repeats), A.1b. REMEMBER THE CROCHET GAUGE! Work the 3rd row back from the wrong side. Cut the strand.

Left shoulder:
Work chain stitches and the first row in the same way as for the right shoulder = 52-56-61-65 double crochets.
Continue from the 2nd row in the diagrams (= row marked with an arrow) and work the patterns for the different sizes from the right side as follows:
Sizes S/M and XXL:
Work A.1a, work A.2 over the next 5 double crochets(= 1 repeat), A.3 over the next 45-54 double crochets (= 5-6 repeats), work A.1b. Work the 3rd row back from the wrong side. Do not cut the strand!
Sizes L/XL and XXXL:
Work A.1b, work A.3 over the next 54-63 double crochets (= 6-7 repeats), work A.1b. Work the 3rd row back from the wrong side. Do not cut the strand!

All sizes:
Work the left and right shoulders together by continuing from the 4th row in the diagrams and work new chain stitches for the neck as follows: Work the pattern as before over the left shoulder, work 36 new chain stitches for the neck (= 1st row in A.5), continue with the pattern as before over the right shoulder. Turn and work back over the right shoulder until there is 1 stitch left before the 36 new chain stitches and skip this stitch. Work from the 2nd row of A.5 (= row marked with an arrow) over the 36 new chain stitches (= 4 repeats). Skip the next stitch (= first stitch on the left shoulder) and work the pattern as before to the end of the row. Turn the piece and work the last row in the diagrams.
Repeat the last 4 rows in height (= and work A.3 over A.5 (= in total 14-16-16-18 repeats of A.3 in width). When the last 4 row have been worked 5-5-6-6 time in height from shoulder and piece measures approx. 20-20-23-23 cm / 8"-8"-9"-9'' from the shoulder, change to jeans blue.
The outermost repeats in both sides of the piece are the sleeves and are not continued. Continue to work for the different sizes as follows:

Sizes S/M and XXL:
Continue the pattern from the 3rd row (= from the wrong side):
Skip A.1a, A.4, 2-1 repeats of A.3 and the first chain space in the next repeat of A.3 for the sleeve. Start in the next chain space of 3 chain stitches (= the middle chain space in a repeat of A.3) and work A.1a around this chain space, work A.4, work A.3 in total 8-12 times, A.2 and finish with A.1a around the middle chain space (with 3 chain stitches) in the next repeat of A.3. Turn the piece.
Sizes L/XL and XXXL:
Continue the pattern from the 3rd row (= from the wrong side).
Skip A.1b, 2-1 repeats of A.3 and skip the next 2 chain spaces in the next repeat of A.3. Start in the next chain space (= the last chain space in A.3) and work A.1b around this chain space, work A.3 in total 10-14 times in width, work A.1b around the next chain space (= first chain space in the next repeat of A.3). Turn the piece.

All sizes:
You have now skipped the same pattern in each side for the sleeves. Continue back and forth with the pattern until the piece measures approx. 43-47-51-54 cm / 17"-18½"-20"-21 1/4'' from the shoulder – adjust so that you finish after the last row of A.3. Cut and fasten the strand.

FRONT PIECE:
Left shoulder:
Work chain stitches and the first row in the same way as the shoulders on the back piece = 52-56-61-65 double crochets.
Continue from the 2nd row in the diagrams (= row marked with an arrow) and work the pattern for the different sizes from the right side as follows:
Sizes S/M and XXL:
Work A.6b over the first 10 double crochets, A.3 over the next 36-45 double crochets (= 4-5 repeats), A.4 over the next 5 double crochets, A.1a. When A.1a, A.3 and A.4 are completed in height, repeat the last 4 rows, but when the 9th row has been completed (= row marked with a star in A.6b) cut the strand.
Sizes L/XL and XXXL:
Work A.6b over the first 10 double crochets, work A.3 over the next 45-54 double crochets (= 5-6 repeats), A.1b. When A.1b and A.3 have been completed in height repeat the last 4 rows, but when the 9th row has been completed (= row marked with a star in A.6b) cut the strand.

Right shoulder:
Work chain stitches and the first row in the same way as the start of the other shoulders = 52-56-61-65 double crochets.
Continue from the 2nd row in the diagrams (= row marked with an arrow) and work the pattern for the different sizes from the right side as follows:
Sizes S/M and XXL:
Work A.1a, work A.2 over the next 5 double crochets, A.3 over the next 36-45 double crochets (= 4-5 repeats), work A.6a over the remaining 10 double crochets.
Sizes L/XL and XXXL:
Work A.1b, work A.3 over the next 45-54 double crochets (= 5-6 repeats), work A.6a over the remaining 10 double crochets.

All sizes:
When the diagrams have been completed in height (apart from A.6a) repeat the last 4 rows in the diagrams. The right and left shoulders are now worked together on the 10th row as follows: work the 10th row in A.6a over the right shoulder, work 18 new chain stitches and work the 10th row in A.6b over the left shoulder. Continue with the pattern as before to the end of the row. Turn and work 1 row back (= 11th and last row in the diagrams). Work A.7 in total 2 times around the 18 new chain stitches. There are now 14-16-16-18 repeats of A.3 in width.
Continue to work in the same way as for the back piece – Adjust so you work the same number of repeats in height as on the back piece, before changing color to jeans blue. The outermost repeats in each side are the sleeves and are not continued, in the same way as for the back piece. Check that you have the same number of repeats in height as on the back piece. Cut and fasten the strand.

ASSEMBLY:
Shoulder seams: Sew the shoulders together, edge to edge in each stitch with light blue.
Seams under the sleeves: Sew with light blue in the outermost stitch so that the seam is not thick.
Seams in the sides: Sew with jeans blue in the outermost stitch so that the seam is not thick.
Repeat in the other side. Cut and fasten the strands.

SLEEVE EDGE:
Work an edge around the sleeves as follows: Start mid under the sleeve and work with light blue and hook size 4 mm / G/6 as follows: * work 1 single crochet, 3 chain stitches, skip 1 cm / 3/8'' *, repeat from *-* around the whole sleeve and finish with 1 slip stitch in the first single crochet of the round. Work in the same way around the other sleeve. Cut and fasten the strand.

NECKLINE:
Work an edge around the neck with light blue and start mid top of one of the shoulders as follows:
ROUND 1: Fasten the strand with1 single crochet in the shoulder seam. Work * 3 chain stitches, skip approx. 2 cm / 3/4'', 1 single crochet *, repeat from *-* around the whole neckline and finish with 1 slip stitch in the first single crochet of the round.
ROUND 2: Work slip stitches to the first chain space.
Work 3 chain stitches and 2 double crochets in the first chain space. Work 3 double crochets around each chain space. Finish with 1 slip stitch in the 3rd chain stitch from the beginning of the round.
ROUND 3: Work * 3 chain stitches, skip 3 double crochets, 1 single crochet between the third and fourth double crochet *, repeat from *-* along the whole neckline, but finish with 1 slip stitch in the first chain stitch.
ROUND 4: Work 1 chain stitch, * work 2 chain stitches, work 1 single crochet around the next chain space *, repeat from *-* along the whole neckline. Finish with 1 slip stitch in the first chain stitch. Cut and fasten the strand.

Diagram

All measurements in charts are in cm.

symbols = 1 chain stitch
symbols = 1 single crochet in stitch
symbols = 1 single crochet around the chain space/row of chain stitches
symbols = 1 double crochet in stitch
symbols = Work 2 double crochets together as follows: Work 1 double crochet in the next double crochet, but wait with the last pull through, work 1 more double crochet in the same double crochet, but at the last pull through, pull the strand through loops on the hook
symbols = Work 2 double crochets together as follows: Work 1 double crochet around the middle chain stitch in the double crochet group but wait with the last pull through, work 1 more double crochet around the same chain stitch, but at the last pull through, pull the strand through all loops on the hook.
symbols = 1 double crochet around the chain space
symbols = Work a double crochet group around the chain space as follows: Work * 1 double crochet, 1 chain stitch *, repeat from *-* 2 more times around the same chain space, 1 double crochet around the same chain space
symbols = 1 double treble crochet around the chain space
symbols = When this row is complete, cut the strand – see the description in the text
symbols = start here!
diagram
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 177-24

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (55)

country flag M Jurrius wrote:

Bij A6b 6de regel (rij) staan 10 lossen maar moet daar geen half stokje tussen na 5 losse gehaakt te hebben?

27.03.2024 - 22:08

country flag Hannah Pitt wrote:

I have just started front left shoulder for size xxxl - do I work diagram a6b so as to shape the neck line or not? It seems to say to work a3 instead. Can you clarify? Thanks

13.11.2023 - 22:51

DROPS Design answered:

Dear Mrs Pitt, seen from RS you first work A.6b over the first 10 sts, then repeat A.3 and end with A.1b; from WS you will work first A.1b then repeat A.3 and end with A.6b. Happy crocheting!

14.11.2023 - 10:29

country flag Lundgren Ann-Margret wrote:

Jag ska virka modell 177-24 Jag läser diagram A3 som omfattar 9 stolpar. Först ska man virka ihop 2 maskor enl symbolen. Då blir inte mönstret symmetriskt. = 2 m tills hoppa över två, 1 fm hoppa över två, 1 fm, hoppa över två = 10 maskor. Behöver hjälp. Mvh AM Lundgren

07.07.2022 - 12:51

DROPS Design answered:

Hej Ann-Margret. Du ska virka 2 stolpar i samma stolpe, då blir det symmetriskt. Mvh DROPS Design

12.07.2022 - 13:12

country flag Anna wrote:

Alla fine ho risolto, grazie. Ho fatto una piccola modifica allo schema delle due spalle del dietro perchè i due schemi (spalla sinistra destra) non sono perfettamente simmetrici. Ho poi pensato di lavorare la parte in blu jeans in tondo. Lo suggerisco perchè si evitano le due cuciture sui fianchi.

14.10.2021 - 12:09

country flag Anna wrote:

Continuando il messaggio precedente, come posso risolvere che ai lati del collo in riga2 (sul dietro del lavoro) non ho gli stessi punti? Poiché la riga 2 della spalla sinistra termina con 1 punto basso, 5 catenelle, un punto Alto, mancano prima di questo ultimo punto i due punti lavorati insieme. La riga 2 della spalla destra (cioè sull'altro lato del collo) inizia infatti con1 punto Alto, 2 punti lavorati insieme, 5 catenelle e 1 punto basso. Come posso procedere?

08.10.2021 - 13:13

DROPS Design answered:

Buonasera Anna, faccia riferimento alla risposta precedente e ci ricontatti se dovesse aver bisogno. Buon lavoro!

13.10.2021 - 18:41

country flag Anna wrote:

Ho realizzato lo scollo del dietro ma al collo non ho uno schema simmetrico alla riga 2. La riga 2 della spalla destra inizia con: (A1b) 1 Punto Alto, (A3) 2 Punti Alti lavorati insieme, 5 catenelle ,1 punto basso, 3 catenelle, 1 punto basso, 5 catenelle La riga 2 della spalla sinistra finisce con: (A3) 2 Punti Alti 5 caselle, 1 punto basso, 3 catenelle, 1 punto basso, 5 catenelle, (A1b) 1Punto Alto

04.10.2021 - 20:25

DROPS Design answered:

Buonasera Anna, sulla seconda riga della spalla destra A.3 va ripetuto su 45-54 maglie alte e non lavorato 1 sola volta. Ci scusiamo se non abbiamo perfettamente interpretato la sua richiesta. Buon lavoro!

13.10.2021 - 18:41

country flag Lisa wrote:

Hei, jeg er usikker hvordan maskene i skuldrene går opp. Jeg hekler i størrelse M, og har 56 staver. Nå skal jeg begynne med diagrammene, men det går ikke opp når jeg bruker beskrivelsen til S/M størrelse til høyre skulder i bakstykket eller venstre skulder i forstykket. Når jeg følger størrelse S/M kommer jeg på totalt 52 masker. Skal jeg heller bruke beskrivelsen til størrelse L? Der går det opp på 56 masker. Mvh, Lisa

06.06.2021 - 14:47

DROPS Design answered:

Hei Lisa. Husk du strikker str. S/M (s/m er samme str.) = det første tallet i tallrekkene i oppskriften. Du hekler 62 luftmasker. Snu arbeidet og hekle 1 stav i 4.luftmaske fra nålen (= 2 staver). Hekle 1 stav i hver av de neste 2 luftmaskene, * hopp over 1 luftmaske, hekle 1 stav i hver av de neste 6 luftmasker *, gjenta fra *-* 7 ganger til = 52 staver. Fortsett fra 2.rad i diagrammene slik: Hekle A.1b (= 1 maske), A.3 over de neste 45 stavene (= 5 rapporter), A.4 over de neste 5 staver (= 1 rapport), A.1a (= 1 maske). God Fornøyelse!

14.06.2021 - 08:44

country flag Rana Totah wrote:

Hello Can you please tell me what is the first stitch inA3 as the diagram explanation is not showing the image of the symbol

17.05.2021 - 15:53

DROPS Design answered:

Dear Mrs Totah, depending on the part of the piece you are working, you will work either A.1b , A.2, A.4., A.6a... just before working A.3, so the stitch you have to work before A.3 will depend on the part of the piece you are working and if you are working from RS or from WS - see written pattern. Read more about diagrams here. Happy crocheting!

18.05.2021 - 08:27

country flag Lorena wrote:

Hola, no estoy segura de la siguiente instrucción "Repetir las últimas 4 hileras EN ALTURA" .... ¿debo repetir una vez más el diagrama desde la hilera 1 a la 4? .... no

19.04.2021 - 19:10

DROPS Design answered:

Hola Lorena. Se repiten las últimas cuatro filas trabajadas (p.e., en A.3, las filas 2-5).

24.04.2021 - 20:06

country flag Ximena wrote:

Buenas Noches! ¿Queria saber si los 75 cm es el ancho desde la manga derecha hasta la manga izaquierda, para la talla S ?

12.02.2021 - 02:32

DROPS Design answered:

Hola Ximena, si, es el ancho desde la manga derecha hasta la manga izaquierda, para la talla S. Buen trabajo!

12.02.2021 - 11:57