Mieke Van Der Woude wrote:
In het patroon staat “ Meerder op de toer met een pijl 36-42-48 stk gelijkmatig over stk in A.2”. Helaas snap ik niet wat hier mee moet doen als ik het diagram bekijk. Kunt u mij verder helpen? Groeten, Mieke
01.04.2022 - 21:18DROPS Design answered:
Dag Mieke,
Op die toeren meerder je het aantal aangegeven steken , gelijkmatig verspreid over de toer. Je meerdert door 2 stokjes in 1 steek te haken.
04.04.2022 - 11:46Lisen wrote:
Tusen takk for vennlig og lynraskt svar. Jeg har også et spørsmål til 3. siste og nestsiste rad i A2: I nestsiste rad sier diagrammet at det skal hekles staver i luftmasker. Men jeg ser ikke at det blir noen luftmasker å hekle dem i? Ifølge diagrammet skal det så vidt jeg forstår bare være staver i 3. siste rad i A. Så jeg valgte å sette stavene i nestsiste rad mellom stavgruppene (og det går jo bra). Men har jeg oversett / misforstått noe? Eller er symbolet feil?
18.01.2022 - 14:23DROPS Design answered:
Hei Lisen. Du har valgt helt riktig (hekle stav mellom hver stavgruppe siden det ikke er en luftmaske å hekle om). mvh DROPS Design
25.01.2022 - 10:25Lisen wrote:
Hei Drops, tusen takk for alle deres fantastiske mønstre og ditto kundestøtte! Mitt spørsmål: Økning skal skje ved at det hekles to st i en. Men jeg skjønner ikke hvordan det skal la seg gjøre her? Bir det ikke bare å slå ekstra staver rundt lm-buene?
16.01.2022 - 10:52DROPS Design answered:
Hei Lisen. Jo, her burde øketipset vært omformulert til at det økes ved å hekle 1 ekstra stav om luftmasken / luftmaskebuen. Eller bare å fjerne øketipset, som vi når har gjort. Takk for at du gjorde oss oppmerksom på dette. mvh DROPS Design
18.01.2022 - 09:49Romane wrote:
Bonjour merci pour votre retour. Cependant, ce n'est toujours pas clair parce que vous dites qu'il faut crocheter soit 3 soit 4 brides dans chaque arceau. Or avec un départ de 79 brides, il n'y a que 26 arceaux. Donc si on augmente d'une bride dans chaque arceau, on n'augmente que de 26 brides au lieu de 36. Donc pour chaque arceau, il faut augmenter d'une ou de deux brides et on aura soit 4 ou 5 brides par arceau? Ca fait quand même une fameuse augmentation pour un rang.
10.06.2021 - 17:09DROPS Design answered:
Bonjour Romane, tout à fait, dans ce cas, si vous comptez par arceau, vous aurez 1 bride de A1. + 10 fois 5 brides + 16 fois 4 brides dans chacun des arceaux de A.2 - crochetez ainsi alternativement 4 ou 5 brides autour de chacun des arceaux en les espaçant à intervalles réguliers. Bon crochet!
11.06.2021 - 07:52Romane wrote:
Bonjour, Y aurait-il moyen que vous fassiez un tutoriel vidéo pour les premiers rangs, et surtout pour le rang d'augmentation? Merci d'avance,
10.06.2021 - 11:39DROPS Design answered:
Bonjour Romane, cette leçon explique comment répartir des augmentations, autrement dit, aux rangs indiqués par une flèche, vous crochèterez soit 3 brides dans chaque arceau (= comme dans le diagramme), soit 4 brides (= 1 augmentation). Est-ce plus facile à comprendre ainsi? Bonne continuation!
10.06.2021 - 13:24Oshrat wrote:
A1 means chain in each round? Why do we need it?
27.11.2020 - 13:15DROPS Design answered:
Dear Oshrat, A.1 indicates the beginning of each round. It may start with 1 chain or 3 chains (= 1 treble stitch). Happy crocheting!
29.11.2020 - 18:46Claudia wrote:
I'm having trouble doing the first row. Am I supposed to make one chain between the six dc block ???
14.06.2020 - 01:04DROPS Design answered:
Dear Claudia, to avoid a tight edge and since the foundation chain is often quite too tight, you crochet here more chains than you need sts on first round, and, on first dc round you will skip 1 chain after every 6 trebles so that you get the correct number of sts/width at the end, just skip every 7th chain as explained and check/keep your tension. Happy crocheting!
15.06.2020 - 09:24Amany wrote:
In the row of first increase, i am not getting 19 repetitions i did increase in each diuble croxhet of the row before (12 dc), i get 13 repetitions not 19 what am i doing wrong??
09.09.2019 - 20:08DROPS Design answered:
Dear Amany, before the first increase you should have 13 repeats in width, on first increase row you should have 6 dc in each A.2 but you have to increase evenly 36 dc (read how to increase evenly here ) = 115 dc in total, ie you have now enough stitches to work 19 repeats of A.2. Happy crocheting!
10.09.2019 - 08:47Monica wrote:
Buongiorno. Come si fa a lavorare 2 m.a. in 1 m.a. nei giri indicati dalla freccia se nel.giro prima non ci sono maglie alte? Grazie
26.06.2019 - 14:15DROPS Design answered:
Buongiorno Monica. Lavora a intervalli regolari 1 maglia alta in più negli archi di catenelle. Buon lavoro!
26.06.2019 - 15:14Potier wrote:
Bonjour pouvait vous me détailer le chema mieux merci
25.03.2019 - 12:47DROPS Design answered:
Bonjour Mme Potier, vous trouverez ici quelques indications complémentaires sur la lecture des diagrammes. Bon crochet!
25.03.2019 - 13:17
Newport |
||||||||||||||||||||||
|
||||||||||||||||||||||
Crochet DROPS poncho in "Big Merino". Worked top down with lace pattern. Size: S - XXXL.
DROPS Extra 0-1309 |
||||||||||||||||||||||
PATTERN: See diagram A.2. Beg round is worked after A.1. Finish round with 1 sl st in first/third ch on round. STRIPES: Work poncho in stripes, see no 1-3 in diagram. Color no 1 = off white Color no 2 = beige Color no 3 = lavender ---------------------------------------------------------- PONCHO: Worked in the round, top down. Work stripes - see explanation above. Work 92-99-113 ch on hook 5.5 mm/US 9 with off white and form a ring with one sl st in first ch. Work 1 dc in first ch, * skip ch 1, work 1 dc in each of the next 6 ch *, repeat from *-* = 79-85-97 dc. Continue to work as follows: Work A.1 (= 1 dc), then work A.2 over the remaining dc, beg on second round in diagram (= 13-14-16 repetitions in width). On rows with arrow inc 36-42-48 dc evenly over dc in A.2 – continue with 6-7-8 repetitions more of A.2 for every inc (i.e. work 19-21-24 repetitions of A.2 in width after first inc, 25-28-32 repetitions of A.2 in width after next inc). REMEMBER THE CROCHET GAUGE! When A.2 has been worked 1 time vertically, there are 151-169-193 dc on row. Work A.2 1 more time vertically, and inc the same way as before = 223-253-289 dc on round. Work the last 5 round in A.2 0-1-2 more times (without inc). Then work the first 4 rounds in A.2, then fasten off. EDGE AT THE TOP: Work 1 sc in every ch from cast on edge with off white. Fasten off. |
||||||||||||||||||||||
Diagram explanations |
||||||||||||||||||||||
|
||||||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |