DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 6.30 CAD /50g
Get the yarn to make this pattern from 50.40CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Sticks and Stones

Knitted sweater with stripes and raglan, worked top down in DROPS Merino Extra Fine. Size children 3 to 14 years.

DROPS Children 27-18
DROPS design: Pattern no me-015-bn
Yarn group B
--------------------------------------------------------
Size: 3/4 - 5/6 - 7/8 - 9/10 - 11/12 - 13/14 years
Materials: DROPS MERINO EXTRA FINE from Garnstudio
150-200-200-250-250-300 g color no 07, light brown
100-100-100-150-150-150 g color no 18, green
100-100-100-150-150-150 g color no 09, dark brown
50-50-50-50-50-50 g color no 01, off white

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR Needle size 4 mm / US 6 (40 and 60 cm / 16'' and 24'') - or size needed to get 21 sts x 28 rows in stockinette st = 4'' x 4'' (10 x 10 cm).
DROPS DOUBLE POINTED NEEDLES AND CIRCULAR Needle size 3 mm / US 2.5 (40 and 60 cm / 16'' and 24'') - for rib.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 6.30 CAD /50g
Get the yarn to make this pattern from 50.40CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
INCREASE TIP (applies to raglan):
Work until 2 sts remain before marker: Make 1 YO, K 2 sts (marker is in the middle of these sts), make 1 YO. On next round K YOs twisted (i.e. work in back loop of st instead of front) to avoid holes.

DIAGRAM:
See diagram A.1-A.3.

STRIPES:
Work: 21-21- 26-20- 20-24 rounds with dark brown
(including rib and short rows on neck) , 6-7- 8-10- 11-12
rounds with light brown and 6-7- 8-10- 11-12 round with
dark brown, diagram A.3, diagram A.2 (work 6-7- 8-10-
11-12 rounds of each stripe), diagram A.1. Then work
with dark brown until finished measurements. IE: In
diagram A.1 and A.3 each row of diagram = 1 round. In
diagram A.2 work 6-7- 8-10- 11-12 rounds (= approx. 2-
2.5-3- 3.5-4- 4 cm of each stripe (Stripes in A.2 vary in
the different sizes according to length of garment).

DECREASE TIP (applies to sleeves):
Work until 2 sts remain before marker, K 2 tog and K 2 twisted tog (i.e. work in back loop of st instead of front).
--------------------------------------------------------

JUMPER:
Worked in the round on circular needle, from top down in STRIPES - see explanation above.

YOKE:
Cast on 92-92- 96-96- 96-96 sts on a short circular
needle size 3 mm with dark brown, insert 1 marker at
beg of round (= mid back). K 1 round. Work rib = K 2/P
2 for 3 cm/1".
Then work an elevation in back of neck as follows (continue in rib): Work 8 sts past marker, turn, tighten yarn and work 16 sts back, turn, tighten yarn and work 24 sts, turn, continue by working 8 sts more on every turn until a total of 48-48-64-64-64-64 sts have been worked, turn and work 1 round until marker mid back again.
Switch to circular needle size 4 mm / US 6 and work 1 round in stockinette st while at the same time inc 10 sts evenly = 102-102-106-106-106-106 sts.

Now insert 4 new markers (for raglan) as follows: Work 17-17-18-18-18-18 sts from marker mid back, insert 1st marker here (at the same time remove marker mid back), work 17 sts more (= sleeve), insert 2nd marker, work 34-34-36-36-36-36 sts (= front piece) and insert 3rd marker, work 17 sts (= sleeve), insert 4th marker and work until 1st marker again (there are 34-34-36-36-36-36 sts between markers on back piece). REMEMBER STRIPES! Then on 1st round, inc 1 st on each side of the 4 markers for raglan (= 8 inc) - SEE INCREASE TIP! Repeat inc every round 1-3-3-5-5-7 times (= 2-4-4-6-6-8 times in total) and then every other round 13-13-15-15-17-17 times = 222-238-258-274-290-306 sts on needle. Work next round as follows: Slip the 47-51-55-59-63-67 sts between 1st and 2nd marker on a stitch holder, cast on 8 new sts over stitch holder, work until 3rd marker, slip the 47-51-55-59-63-67 sts between 3rd and 4th marker on a stitch holder, cast on 8 new sts over stitch holder, work until 1st marker again = 144-152-164-172-180-188 sts on needle.

BODY:
Continue with STRIPES in stockinette st. Work until piece measures 41-45-50-55-59-64 cm / 16"-17 3/4"-19 3/4"-21½"-23 1/4"-25 1/4" in total from shoulder.
Work first 1 round in stockinette st while AT THE SAME TIME inc 28-32-32-36-36-40 sts evenly = 172-184-196-208-216-228 sts. Switch to circular needle size 3 mm / US 2.5 and work rib = K 2/P 2 for 5 cm / 2''. LOOSELY bind off with K over K and P over P. Piece measures in total approx. 42-46-51-56-60-65 cm / 16½"-18"-20"-22"-23½"-25½" from neck (= 46-50-55-60-64-69 cm / 18"-19 3/4"-21½"-23½"-25 1/4"-27" in total from shoulder and down).

SLEEVE:
Slip sts from one stitch holder on double pointed needles size 4 mm / US 6 and cast in addition on 8 new sts under sleeve = 55-59-63-67-71-75 sts. Insert 1 marker mid under sleeve (i.e. in the middle of the 8 new sts). NOW MEASURE PIECE FROM HERE! Continue with STRIPES - AT THE SAME TIME when 2.5 cm / 7/8'' have been worked, dec 1 st on each side of marker – SEE DECREASE TIP! Repeat dec every 2.5 cm / 7/8'' 8-10-11-13-14-15 more times (= 9-11-12-14-15-16 times in total) = 37-37-39-39-41-43 sts. Continue to work until sleeve measures 27-30-34-38-41-45 cm / 10½"-11½"-13½"-15"-16"-17 3/4". Work 1 round in stockinette st while AT THE SAME TIME inc 7-7-9-9-7-9 sts evenly = 44-44-48-48-48-52 sts. Switch to double pointed needles size 3 mm / US 2.5 and work rib = K 2/P 2 for 5 cm / 2''. Then LOOSELY bind off with K over K and P over P.
Work the other sleeve the same way.

ASSEMBLY:
Sew the openings under the sleeves.

This pattern has been corrected.

Updated online: 14.06.2021
Correction in diagram A.3.

Diagram

symbols = light brown
symbols = dark brown
symbols = green
symbols = off white
diagram
diagram

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Sticks and Stones

Anagocha, Spain

Sticks and Stones

Annette, Germany

Sticks and Stones pullover

natafor, Finland

Post a comment to pattern DROPS Children 27-18

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (35)

country flag Brigitte wrote:

Eine Frage zu den Raglanschrägen und den Umschlägen. Spielt es hier keine Rolle, wie die Umschläge abgestrickt werden ? Sollte sich nicht bei jeder Raglanschräge einmal die Masche nach rechts und dahinter die Masche nach links neigen ? Und das bei jeder Raglanschräge ? Oder spielt das hier keine Rolle, wie man den Umschlag abstrickt ? Danke und liebe Grüße Brigitte

10.05.2023 - 10:32

DROPS Design answered:

Liebe Brigitte, hier werden die Umschläge einfach verschränkt gestrickt (wie z.B. in dieser Lektion, aber gerne können Sie die Umschläge so stricken, daß sie in die gewünschte Richtung neigen werden (siehe dieses Video z.B.). Viel Spaß beim stricken!

10.05.2023 - 16:36

country flag Brigitte Beier wrote:

Für den höheren Nacken immer 8 M. mehr im Bündchenmuster stricken. Da heisst es nur " Faden fest anziehen “ Wenn ich zurückstricke, hebe oder stricke ich die 1. Masche ab ? Danke für eine kurze Erklärung Brigitte Beier

08.05.2023 - 15:31

DROPS Design answered:

Liebe Frau Beier, bei der nächsten Reihen wird der Faden fest gezogen und dann strickt man weiter - dieses Video zeigt, wie man so eine Erhöhung strickt. Viel Spaß beim stricken!

08.05.2023 - 16:14

country flag Brigitte wrote:

Die Raglanschräge finde ich nicht schön, 7 x in jeder Reihe, dann 15 x in jeder 2. Reihe. Übergang sieht nicht gut aus. Warum ist das so gelöst ?

07.05.2023 - 15:55

country flag Brigitte wrote:

Sehr geehrte Damen vom Strickteam,l warum wird bei den Raglanzunahmen z. B. 11 x in jeder Reihe und dann 15 x in jeder 2. Reihe zugenommen ? Dieser Übergang sieht nicht schön aus. Könnte man das nichtt anders - also in jeder 2. Reihe machen ? Kenne ich z, B, bei Erwachsenenpullover so. Würde dann die Raglanschreäge zu lang werden ? Das kenn ich so nicht von anderen Raglanpullovern von oben nach unten, Hätten Sie noch einen anderen Vorschlag hiefür ?

07.05.2023 - 15:54

DROPS Design answered:

Liebe Brigitte, je nach der Größe und dem Schnitt, braucht mann eine bestimmte Reihenanzahl für die gewünschte Höhe; damit die Passe (und Rumpfteil sowie Ärmel) die genaue Breite haben, soll man so zunehmen, dh einpaar Zunahmen in jeder Runde dann in jeder 2. Runde. Viel Spaß beim stricken!

08.05.2023 - 08:15

country flag Brigitte wrote:

Ich möchte die Raglanpasse - habe 96 M. für das Bündchen - in jeder 2. Reihe zunehmen.\r\n(nicht wie beschrieben am Anfang jede Reihe) Was muss ich dann verändern bzw. wie viele Maschen in der 1. Reihe zunehmen ?\r\nKönnten Sie mir das ausrechnen ? Größe soll ansonsten so bleiben.\r\nDanke und herzliche Grüße Brigitte Beier

09.03.2023 - 15:43

country flag Brigitte wrote:

Was ist nun richtig ? das Video.....da ist der Beginn der verkürzten Reihen nach dem Bündchen, was ich auch für richtig halte, in der Beschreibung aber bereits bei Beginn des Bündchens mit 2 re, 2 li. Maschen (schon im Bündchen verkürzte Reihen beginnen ???) Wenn ich aber nach dem Bund beginne, wird das dann hintene nicht zu hoch ? Ich mache eigentlich die verkürzten R. immer, damit es vorn etwas tiefer ist und nicht hinten höher. ???? Danke für die Antwort. Brigitte

24.02.2023 - 09:54

DROPS Design answered:

Liebe Brigitte, das Video zeigt die Technik, dann soll mann immer die Beschreibung der Anleitung folgen, was das Muster (Rippenmuster oder Glatt rechts), die Maschenanzahl, usw betrifft. Viel Spaß beim stricken!

24.02.2023 - 10:09

country flag Brigitte wrote:

Hallo, nochmal eine Frage - warum bereits im Bündchenmuster die verkürzten Reihen ? Wäre es nicht besser, die verkürzten Reihen erst nach dem Bündchen im Glatt rechts Gestrick zu stricken ? Gruß Brigitte

23.02.2023 - 14:31

DROPS Design answered:

Liebe Brigitte, das ist wahrscheinlich ein Designer-Wahl, gerne können Sie wahrscheinlich die Erhöhung auch glatt rechts stricken. Viel Spaßb eim stricken!

23.02.2023 - 14:55

country flag Brigitte Beier wrote:

Stimmt die Angabe der Ärmellänge ? ........ weiterstricken bis die Ärmellänge 45 cm erreicht hat, dann Bündchen mit 5 cm = 50 cm. Die Gesamtlänge ab Halsmitte ist mit 73 cm angegeben. Das habe ich ja als erwachsene Person bei einer Größe von 1.66 !! Das kann sicher nicht stimmen. Ich bitte um Rückmeldung bzw. Korrektur ? Brigitte Beier

12.02.2023 - 10:03

DROPS Design answered:

Liebe Frau Beier, ja so stimmt es aber die Maßnahmen finden Sie in der Skizze = 8 cm (1/2 Halsauschnitt) + 15 cm Passe + 50 cm Ärmel = 73 cm für 1/2 Spannweite (2x73=146 cm von der Ende vom 1. Ärmel bis der Ende vom 2. Ärmel. Viel Spaß beim stricken!

13.02.2023 - 09:44

country flag Brigitte wrote:

Wird der Ärmel rundgestrickt oder in Hin- und Rückreihen ? Geht aus der Anleitung nicht klar hervor. Danke für Ihre Antwort.

08.02.2023 - 22:03

DROPS Design answered:

Liebe Brigitte, die Ärmel werden in der Runde gestrickt. Viel Spaß beim stricken!

09.02.2023 - 09:51

country flag Brigitte Beier wrote:

Danke für die Antwort. Aber ich habe leicht gedehnt für das Rippenmuster Halsbündchen 24 M. auf 10 cm, das sind 3 M mehr als im Glatt rechts Muster auf 10 cm, das wären bei 88 cm Umfang ca. 26 M. Zunahme, aber nicht 36 oder 32. Das halte ich für zu viel, dann schlabbert er unten zu weit. Was meinen Sie ? Oder soll das Bündchen unten weiter sein als der Rest ? Danke nochmal für Ihre Antwort

07.02.2023 - 12:58

DROPS Design answered:

Liebe Frau Beier, das Rippenmuster ist elastischer und zieht sich z.B. im Vergleich zum Glatt-rechts-Gestrick zusammen. Wenn vor dem Rippenmuster-Rand zugenommen wird, kann man damit vermeiden, dass der Rand deutlich enger wird als das restliche Rumpfteil. Wenn Sie aber einen eher festen Rand möchten, dann können Sie so anpassen. Viel Spaß beim stricken!

07.02.2023 - 13:27