DROPS / 171 / 19

Juniper by DROPS Design

Knitted DROPS jumper with vents in the side and roll edge in ”Andes”. Size: S - XXXL.

Tags: sweaters,

DROPS design: Pattern no an-043
Yarn group E or C + C
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
All measurements in chart in cm. Conversion to inch - see page 4.
Materials:
DROPS ANDES from Garnstudio
600-700-750-800-900-1000 g color no 7820, green

DROPS CIRCULAR NEEDLE (60 or 80 cm / 24'' or 32'') size 8 mm / US 11 - or size needed to get 11 sts x 15 rows in stockinette st = 4'' x 4'' (10 x 10 cm).
DROPS CIRCULAR NEEDLE (40 cm / 16'') size 7 mm / US 10.75 for neck edge - or size needed to get 12 sts x 24 rows in garter st = 4'' x 4'' (10 x 10 cm).

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (11)

65% Wool, 35% Alpaca
from 7.85 $ /100g
DROPS Andes uni colour DROPS Andes uni colour 7.85 $ /100g
Wool Warehouse Direct Ltd
Order
DROPS Andes mix DROPS Andes mix 8.25 $ /100g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 47.10$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (worked in the round):
1 ridge = 2 rounds. * K 1 round and P 1 round *, repeat from *-*.

GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

INCREASE TIP:
Inc 1 st by making a YO. On next row K YO twisted to avoid holes.
----------------------------------------------------------

BACK PIECE:
Worked back and forth on circular needle.
Cast on 48-53-57-63-69-77 sts on circular needle size 8 mm / US 11 with Andes.
Work as follows (1st row = WS): 2 edge st in GARTER ST - see explanation above - in stockinette st (i.e. P on 1st row) until 2 sts remain, 2 edge sts in garter st. Continue back and forth like this until piece measures 14 cm / 5½''. At the end of the next 2 rows cast on 1 new st in each side = 50-55-59-65-71-79 sts. Now continue in stockinette st and 1 edge st in garter st in each side. REMEMBER THE KNITTING GAUGE When piece measures 31-32-33-34-35-36 cm / 12¼''-12½''-13''-13 3/8''-13¾''-14¼'', bind off 2-2-3-3-4-4 sts in each side for armhole = 46-51-53-59-63-71 sts. When piece measures 50-52-54-56-58-60 cm / 19 3/4''-20½''-21¼''-22''-22¾''-23 5/8'', bind off the middle 16-17-17-17-19-19 sts for neck and finish each shoulder separately. Continue bind off 1 sts on the next row from the neckline =14-16-17-20-21-25 sts for shoulder. Bind off when piece measures 52-54-56-58-60-62 cm / 20½''-21¼''-22''-22¾''-23 5/8''-24 3/8''. Work the other shoulder the same way.

FRONT PIECE:
Cast on and work as back piece. When piece measures 45-46-48-49-51-52 cm / 17 3/4"-18"-19"-19 1/4"-20"-20½'', slip the middle 8-9-9-9-11-11 sts on a stitch holder for neck and finish each shoulder separately. Continue to bind off for neck on every row from neck as follows: bind off 2 sts 2 times and 1 st 1 time = 14-16-17-20-21-25 sts remain for shoulder. Bind off when piece measures 52-54-56-58-60-62 cm / 20½''-21¼''-22''-22¾''-23 5/8''-24 3/8''. Work the other shoulder the same way.

SLEEVE:
Worked back and forth on circular needle.
Cast on 26-27-28-30-31-32 sts (includes 1 edge st in each side) on circular needle size 8 mm / US 11 with Andes. Work as follows (1st row = WS): 1 edge st in garter st, in stockinette st (i.e. P on 1st row) until 1 st remains, 1 edge st in garter st. When piece measures 10-10-10-12-12-9 cm / 4"-4"-4"-4 3/4"-4 3/4"-3½'', inc 1 st in each side of piece - READ INCREASE TIP! Inc like this every 6th row 11-5-5-5-3-0 times, then every 4th row 0-7-7-7-10-14 times (= 11-12-12-12-13-14 times in total) = 48-51-52-54-57-60 sts. Bind off when piece measures 54-53-53-51-51-48 cm / 21 1/4"-21"-21"-20"-20"-19" (shorter measurements in the larger sizes because of wider shoulders). Make another sleeve the same way.

ASSEMBLY:
Sew the shoulder seams tog. Sew sleeves in body. Sew underarm seam and side seam, start at the cuff and work down to sts cast on in the side on body (= 14 cm / 5½'' vent). Sew inside 1 edge st in garter st in each side. Repeat in the other side.

NECK EDGE:
Worked in the round on circular needle.
Pick up from RS approx. 50-60 sts (includes sts on stitch holder) on circular needle size 7 mm / US 10.75 with Andes. Work 2 ridges. Bind off.

Diagram

All measurements in charts are in cm.


Comments (11)

Leave your comment!

Gabrielle 24.04.2018 - 10:25:

I prefer patterns that are worked back and forth (not in the round). How can I search for / find these patterns? Would it be possible to have a separate category for patterns worked back and forth?

DROPS Design 24.04.2018 kl. 14:24:

Dear Gabrielle, there is no search for patterns worked back and forth, this one eg is worked back and forth in several parts sewn tog at the end. And you'll find here how to adapt a pattern into straight needles. Happy knitting!

Pia Neergaard 16.04.2018 - 22:26:

Spørgsmål har noget garn der har 70% alpaca 20 % uld og 10 % acrylic og vil gerne strikke denne opskrift , garnet hedder bbb alpaka 70

DROPS Design 17.04.2018 kl. 10:12:

Hei Pia. For å finne ut om garnet kan byttes i det du har må du sjekke strikkefastheten. Denne oppskriften strikkes med garn fra garngruppe E, evt 2 tråder med garngruppe C, og strikkefasthet 11 m x 15 p glstrikk på 10 x 10 cm. Du kan lese mer om garngruppene våre her: link Innholdet i garnet kan påvirke plaggets egenskaper (hvordan det kjennes ut, hvordan det vaskes osv), så det blir opp til deg. God fornøyelse

Els-Marie Edelfeldt 23.11.2017 - 13:49:

Stickar tröja mönster 171/19 "Juniper"... när ärmen beskrivs står det: Öka vart 6:e varv 5 ggr (min stl. M) OCH vart 4:e varv 7 går. Hur skall jag tolka det????? Växlar jag eller tar jag det efter varandra? Otydlig beskrivning tycker jag....Mvh Els-Marie

DROPS Design 23.11.2017 kl. 14:25:

Du ska först öka 5 gånger på vart 6:e varv och därefter öka 7 gånger på vart 4:e varv.

Trisha Cochrane 24.02.2017 - 09:05:

Hi there - I have just started knitting the Juniper with Drops Andes wool. But the bottom edge is already rolling up - and since there is no ribbing I am not clear how it will stay straight as in the photo? Could you help? Thank you :)

DROPS Design 24.02.2017 kl. 09:54:

Dear Mrs Cochrane, you can block the jumper before wearing it. Happy knitting!

Maria 22.11.2016 - 16:15:

Buongiorno,é possibile lavorare con ferri dritti questo modello?grazie

DROPS Design 22.11.2016 kl. 16:20:

Buongiorno Maria. Sì le spiegazioni prevedono già una lavorazione avanti e indietro sui ferri. Può quindi sostituire i ferri circolari con quelli dritti e seguire le spiegazioni senza apportare modifiche. Il bordo intorno allo scollo viene lavorato in tondo: può usare il gioco di ferri a doppia punta. Buon lavoro!

Rita Bossaerts 24.06.2016 - 16:01:

Less is more...

Anneke 21.06.2016 - 23:30:

Door eenvoud mooi!

FruStrik 07.06.2016 - 15:32: www.frustrik.dk

Skøn farve, hurtig og let model og i et dejligt garn - Andes!

Lena Arweson 05.06.2016 - 21:30:

Vacker tröja som passar till allt

Iviva 04.06.2016 - 22:47:

Tout simple, facile à porter , j'espère qu'il sera retenu !

Post a comment to pattern DROPS 171-19

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.