Stephanie wrote:
I am baffled with the In Treble Hat pattern. Do you have written instructions please?
11.11.2023 - 08:17DROPS Design answered:
Dear Stephanie, this is the only format of the pattern available, with a combination of charts and written instructions. To better understand our charts you can check the following lesson: https://www.garnstudio.com/lesson.php?id=69&cid=19. You can also ask if you have problems in a specific section of the pattern. Happy crocheting!
12.11.2023 - 22:51Elena wrote:
Cosa significa lavorare una maglia “intorno” alla catenella, anziché nella catenella?
14.12.2022 - 15:52DROPS Design answered:
Buonasera Elena, provi a vedere se questo video può esserle di aiuto. Buon lavoro!
28.12.2022 - 19:35Catherine Ness wrote:
I'm not referring to the main pattern which I have finished, only the last part of the pattern, just the edging. "Now work an edge as follows:.." My question is, why are the bottom edge and the top edge different? - one has 3ch between each dc, the other has 4ch! This results in one edge being tighter than the other.
03.10.2020 - 20:18DROPS Design answered:
Dear Mrs Ness, this is correct, the top edge will be tighter than the bottom edge. Happy crocheting!
05.10.2020 - 10:01Catherine Ness wrote:
When edging the neck warmer, the bottom edge has 3 chain between each dc but the top has 4 chain. Is this correct, as it means that the top will be looser than the bottom. Shouldn't both edges be the same?
28.09.2020 - 23:31DROPS Design answered:
Dear Mrs Ness, at the beg of the round you start with 3 chains to replace the first dc, then work 2 dc (= 1 dc-group with 3 dc), you work then 3 dc for each dc-group and 1 chain between each dc group, you should end with 1 chain after last dc-group and 1 sl st in the 3rd chain from beg of round wich replace 1st dc. Happy crocheting!
29.09.2020 - 08:03Kiara wrote:
Anch'io ho problemi nel leggere i diagrammi, ritengo che un video sarebbe molto utile per imparare ad orientarsi. Ho letto la risposta per Mary, ma vorrei sapere: quando non è indicato nulla, negli spazi bianchi, si salta direttamente avanti? Le tre catenelle indicate quasi all'inizio del lavoro in A.1 b e A.1 c, quando si lavorano? Appartengono a un giro? Grazie, attendo risposta prima di effettuare l'acquisto della lana.
28.01.2019 - 17:15DROPS Design answered:
Buongiorno Kiara. Se capiamo correttamente la domanda, lo spazio bianco in realtà coincide con una catenella (il trattino orizzontale che trova sopra lo spazio bianco). Intorno a quella catenella lavora le maglie alte al giro successivo e si forma il buco che vede in fotografia. Le 3 cat di A1b e A1c si lavorano al primo giro dei diagrammi. Buon lavoro!
28.01.2019 - 20:45Mary wrote:
Buonasera,putroppo non riesco a leggere il diagramma per il berretto!Non riesco proprio ad iniziare il lavoro,potrei avere delle delucidazioni in merito?Anche un video esplicativo su come lavorare i diagrammi A1a,b,c sarebbe utile!Grazie
21.10.2017 - 16:38DROPS Design answered:
Buongiorno Mary. Deve avviare 5 cat e chiuderle in cerchio. Poi lavora 3 cat, 2 maglie alte, (diagramma A.1a) poi ripete per 4 volte il diag A1b: 3 cat, 3 m.a; poi lavora il diag A1c: 3 cat e chiude il giro con 1 m.bss nella terza cat dall'inizio del giro.Prosegue iniziando i giri con 3 cat e lavorando 1 m.a quando trova il segno con il pallino nero e 1 cat quando trova il trattino orizzontale. Buon lavoro!
22.10.2017 - 09:34MARIA AMODEO FERNANDEZ wrote:
Hola, me encanta este conjunto,de momento querÍa hacer el cuello pero no entiendo el diagrama y he buscado en ayuda y no lo he encontrado, no se si está publicado o no. Por favor me podríais explicar cómo se hace lo del diagrama?, no comprendo lo de A.2a, A.2b y A2c, lo he leído varias veces pero no logro entender el patrón. Gracias por su contestación. Un saludo, MARIA.
10.01.2017 - 14:42DROPS Design answered:
Hola Maria. Los diagramas A.2a, A.2b y A2c se trabajan como sigue: 3 p.de cad., 2 p.a. (= A.2a), 1 p.de cad, 3 p.a., 1 p.de cad., 3 p.a. (= dos repeticiones de A.2b que tienes que trabajar hasta el final de la vuelta = un total 16-17 repeticiones (depende de la talla)) y 1 p.de cad. (= A.2c). No te olvides de finalizar la vta según la INFORMACIÓN PARA REALIZAR EL TRABAJO.
14.01.2017 - 12:24Anpatito wrote:
Bonjour Je n'ai pas de problème avec les points mais j'ai recommencé le bonnet plusieurs fois et je ne suis toujours pas satisfaite Il est toujours trop grand même après les 27 diminutions Je ne crochète ni trop serré ni trop lâche, ce n'est donc pas une question grosseur de crochet C'est dommage car l'ensemble me plaît beaucoup Comment dois-je procéder? Merci ^pour votre réponse
20.12.2016 - 19:52DROPS Design answered:
Bonjour Mme Anpatito, si votre échantillon et votre tension sont justes (= 11 B = 10 cm de large), et que la bordure en ms est trop large, ajoutez des diminutions supplémentaires pour ajuster à votre taille. (la bordure doit être plus serrée que le tour de tête pour que le bonnet tienne bien en place). Bon crochet!
21.12.2016 - 09:28Maria Bækkelund wrote:
Jeg kan ikke printe diagrammerne ud.Der er blank på siderne.Hilsen Maria Bækkelund
21.09.2016 - 17:38
In Treble |
|||||||||||||||||||
|
|
||||||||||||||||||
Set consists of: Crochet DROPS hat and neck warmer with double groups in 1 thread Big Delight or 2 threads Fabel.
DROPS 172-7 |
|||||||||||||||||||
CROCHET INFO: Beg every round with sc with 1 ch and finish with 1 sl st in first ch at beg of round. Beg every round with dc with 3 ch and finish with 1 sl st in third ch at beg of round. PATTERN: See diagrams A.1 and A.2. DECREASE TIP-1: Dec 1 sc as follows: Work 1 sc but wait with last pull through (= 2 sts on hook), then work next sc but on last pull through, pull yarn through all sts on hook = 1 sc dec. DECREASE TIP-2 (evenly spaced): To calculate how often dec should be done, use the total no of sts on round (= 81 sc) and divide these sts by no of dec to be done (e.g. 27 sc) = 3. I.e. in this example work approx. every 2nd and 3rd sc tog. COLOR TIP (applies to hat): To a richer color spectre with Big Delight work every other round with strand from inside and outside of ball. When using 2 threads DROPS Fabel, try to start the skeins with the same color report. ---------------------------------------------------------- HAT: The piece is worked top down in the round.. Beg with 1 thread Big Delight or 2 threads Fabel on hook size 7 mm/KorL and work pattern according to diagram A.1a, then work A.1b 4 times on round, finish with A.1c. REMEMBER THE CROCHET GAUGE! When entire diagram has been worked vertically, piece measures approx. 13 cm / 5'' from the top down. Continue by repeating the 2 last rounds in diagram until piece measures 20 cm / 8'' – adjust to finish after last round in diagram. Then work an edge in sc as follows – READ CROCHET INFO AND COLOR TIP: Work 1 sc in every dc and 1 sc around every ch = 81 sts (includes 1 ch at beg of round). On next round, dec 27-25 sts evenly - READ DECREASE TIP-1 and DECREASE TIP-2 = 54-56 sc. Continue in the round with 1 sc in every sc until piece measures 24-25 cm / 9½"-9 3/4" in total. Fasten off. NECK WARMER: Work in the round, bottom up. Work 85-90 ch on hook size 7 mm/KorL with 1 thread Big Delight or 2 threads Fabel and form a ring with 1 sl st in first ch. ROUND 1: Work 3 ch – READ CROCHET INFO, work 1 dc in each of the next ch 2, * work ch 1, skip ch 2, work 1 dc in each of the next 3 ch *, repeat from *-* the entire round until 2 ch remain, work 1 ch and finish with 1 sl st in 3rd ch at beg of round = 68-72 sts. Now work pattern, beg on round with arrow in diagram as follows: Work A.2a, A.2b 16-17 times on round, A.2c. REMEMBER THE CROCHET GAUGE! Repeat 2nd and 3rd round in diagram A.2a to A.2c until piece measures 34-36 cm / 13½"-14 1/4'' – adjust to finish after a round that is 3rd round in diagram. Now work an edge as follows: Work ch 5, 1 sc in next ch, * ch 3, 1 sc in next ch *, repeat from *-* the entire round and finish with 1 sl st in 1 ch at beg of round. Fasten off. Work 1 edge along ch-row worked at beg of piece as follows: Work 1 sc around a ch-space with ch 2, 4 ch * work 1 sc around next ch-space, 4 ch *, repeat from *-* the entire round and finish with 1 sl st in first sc on round. Fasten off. |
|||||||||||||||||||
Diagram explanations |
|||||||||||||||||||
|
|||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Anpatito wrote:
Merci beaucoup pour votre réponse C'est ce que j'ai fait
22.12.2016 - 11:07