DROPS / 171 / 25

Spectre by DROPS Design

Knitted DROPS jacket worked in a circle in garter st with short rows in ”Delight”. Size: S - XXXL.

DROPS design: Pattern no de-157
Yarn group A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS DELIGHT from Garnstudio
500-550-600-650-750-800 g color no 18, fall forest

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (40 and 80 cm / 16'' and 32'') SIZE 4 mm/US 6 - or size needed to get 21 sts x 41 rows in garter st = 4'' x 4'' (10 x 10 cm).
DROPS DOUBLE POINTED NEEDLES size 3.5 mm / US 4 for sleeve - or size needed to get 23 sts x 30 rows in stockinette st = 4'' x 4'' (10 x 10 cm).

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (42)

75% Wool, 25% Polyamide
from 2.55 $ /50g
DROPS Delight print DROPS Delight print 2.55 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 25.50$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

GARTER ST (worked in the round):
1 ridge = 2 rounds. * K 1 round and P 1 round *, repeat from *-*.

SHORT ROWS IN GARTER ST - WITH YOS:
When turning and making a YO avoid holes in piece.
Short rows in garter st: Work no of sts described in pattern, slip 1 st as if to P, place strand on the front of piece, move the slipped st back on left needle. Turn piece. On next row when getting to the slipped st, work st and strand around it (YO) tog as one st and work the rest of row.

INCREASE TIP:
When picking up more sts than there are ridges (e.g. when picking up 140 sts evenly over the next 132 ridges), pick up 1 st in every ridge and make the remaining sts with 1 YO distributed evenly between sts. I.e. in this example pick up 132 sts in the 132 ridges and make YOs 8 times evenly = 140 sts. Work YO twisted on next row.
----------------------------------------------------------

CIRCLE:
Work first the outer circle, then pick up sts on the shortest curve on this and work circles in the middle.

OUTER CIRCLE:
Work piece back and forth in GARTER ST - see explanation above, until finished measurements. Cast on 70-72-74-76-78-80 sts on circular needle size 4 mm / US 6 with Delight.

PART 1:
Work 7-7-7-7-8-8 ridges (= 14-14-14-14-16-16 rows). REMEMBER THE KNITTING GAUGE On next row from RS work short rows as follows:
Row 1 (= RS): K the first 60-66-66-66-66-66 – READ SHORT ROWS IN GARTER ST – WITH YOS, turn piece.
Row 2 (= WS): K all sts, turn piece.
Row 3: K the first 54-60-60-60-60-60, turn.
Row 4: K all sts, turn piece.
Row 5: K the first 48-54-54-54-54-54, turn.
Row 6: Turn and K all sts, turn piece.

Continue to work short rows in garter st like this. I.e. work 6 sts less on every row from RS until 1 ridge has been worked (= 2 rows) over the last 6 sts (= 10-11-11-11-11-11 ridges, 17-18-18-18-19-19 ridges have been worked in total on the widest). Last row is from WS. Then work short rows as follows:
Row 1 (= RS): K the first 8 sts, turn piece.
Row 2 (= WS): K all sts, turn piece.
Row 3: K the first 14 sts, turn piece.
Row 4: K all sts, turn piece.
Row 5: K the first 20 sts, turn piece.
Row 6: Turn and K all sts, turn piece.
Continue to work short rows in garter st like this. I.e. work 6 sts more on every row from RS until 2-4-6-8-10-6 sts remain on row (= 11-11-11-11-11-12 ridges). Last row is from WS. Work 7-7-8-8-8-8 ridges over all sts.

14-14-15-15-16-16 ridges have been worked on the shortest and 35-36-37-37-38-39 ridges have been worked on the widest. Piece measures approx. 7-7-7-7-8-8 cm / 2 3/4"-2 3/4"-2 3/4"-2 3/4"-3"-3" on the shortest and approx. 17-18-18-18-19-19 cm / 6 3/4"-7"-7"-7"-7½"-7½" on the widest.

Work 20-20-20-21-21-21 parts in total. Piece measures approx. 137-137-146-154-164-164 cm / 54"-54"-57½"-60½"-64½"-64½" on the shortest and approx. 341-351-361-379-389-400 cm / 134"-138"-142"-149"-153"-157½" on the widest. Bind off.

ASSEMBLY:
Sew bind-off edge tog with cast-on edge, in outer loop of edge sts.

CIRCLE IN THE MIDDLE:
Work piece in the round on circular needle (switch to double pointed needles when needed) from the shortest side on the outer circle and in towards middle. Pick up from RS on circular needle size 4 mm / US 6 as follows: Adjust so that seam is mid back.

Pick up 1 st in each of the first 35-37-40-41-43-45 ridges (i.e. over the next 70-74-80-82-86-90 rows), cast on 36-38-40-42-44-46 sts (for armhole), skip the next 35-37-39-41-43-45 ridges (= 70-74-78-82-86-90 rows in total), pick up 134-140-144-150-154-158 sts evenly over the next 140-132-142-151-164-156 ridges (= 280-264-284-302-328-312 rows in total) – READ INCREASE TIP, cast on 36-38-40-42-44-46 sts (for armhole), skip the next 35-37-39-41-43-45 ridges (= 70-74-78-82-86-90 rows in total), pick up 1 st in each of the first 35-37-40-41-43-45 ridges (i.e. over the next 70-74-80-82-86-90 rows) = 276-290-304-316-328-340 sts.

Now work in the round in GARTER ST - see explanation above, until finished measurements. P 1 round, insert 5 markers and dec evenly as follows: Dec 0-2-4-4-4-4 sts evenly on entire round and work as follows: * P 46-48-50-52-54-56, insert 1 marker *, repeat from *-* 5 times in total, P the last 46-48-50-52-54-56 sts = 276-288-300-312-324-336 sts.

On next round, dec as follows: K 1, K the next 2 tog (= 1 st dec), * work until 3 sts remain before next marker, K 2 tog (= 1 st dec), K 2 (marker is in the middle of these 2 sts), K 2 tog (= 1 st dec) *, repeat from *-* 5 times in total, work until 3 sts remain, K 2 tog (= 1 st dec), K 1 (= 12 sts dec in total).

Dec like this every 4th round until 24 sts remain. Work all sts tog 2 by 2 = 12 sts. Cut the yarn and pull it through the remaining sts, tighten tog and fasten. Circle in the middle measures approx. 42-44-46-48-50-52 cm / 16½''-17¼''-18''-19''-19¾''-20½'' in diameter.

SLEEVE:
Worked in the round from bottom up.
Cast on 46-48-50-52-56-58 sts on double pointed needles size 3.5 mm / US 4 with Delight. Work in garter st for 3 cm / 1''. Then work in stockinette st but assemble sleeves with WS outwards. Insert 1 marker at beg of round (= mid under sleeve). When piece measures 6-10-6-10-10-8 cm / 2 1/4"-4"-2 1/4"-4"-4"-3", inc 1 st on each side of marker. Inc like this every 3-2½-2½-2-2-2 cm / 1 1/8"-7/8"-7/8"-3/4"-3/4"-3/4" 16-17-19-20-20-22 times in total = 78-82-88-92-96-102 sts. Bind off when sleeve measures 53 cm / 21'' in total. Make another sleeve the same way.

ASSEMBLY:
Turn the sleeves and fasten them with WS outwards.

Diagram

All measurements in charts are in cm.

= outer circle
= circle in the centre
= knitting direction

1) Why is the knitting/crochet tension so important?

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

2) What are the yarn groups?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

3) Can I use a different yarn than what the pattern suggests?

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

4) How do I use the yarn converter?

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

5) Why do I get the wrong knitting tension with the suggested needle size?

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

6) Why is the pattern worked top-down?

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

7) Why are the sleeves shorter in larger sizes?

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

8) What is a repeat?

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

9) How do I work according to a knitting diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

10) How do I work according to a crochet diagram?

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

11) How do I work several diagrams simultaneously on the same row/round?

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

12) Why does the piece start with more chain stitches than it’s worked with?

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

13) Why increase before the rib edge when the piece is worked top-down?

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

14) Why increase in the cast-off edge?

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

15) How do I increase/decrease on every 3rd and 4th row/round alternately?

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

16) Why is the pattern slightly different than what I see in the photo?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

17) How can I work a jacket in the round instead of back and forth?

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

18) Can I work a jumper back and forth instead of in the round?

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

19) Why do you show discontinued yarns in the patterns?

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

20) How do I make a women’s size garment into a men’s size one?

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

21) How do I prevent a hairy garment from shedding?

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

22) Where on the garment is the length measured?

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

23) How do I know how many balls of yarn I need?

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.