Aurora Borealis |
||||||||||||||||||||||
|
||||||||||||||||||||||
Knitted DROPS shawl with zig-zag pattern, lace pattern and stripes in ”Alpaca”.
DROPS 171-13 |
||||||||||||||||||||||
GARTER ST (back and forth): K all rows. 1 ridge = K2 rows. MEASUREMENTS All measurements given in pattern are measured at the longest. PATTERN: See diagrams A.1 to A.6. The diagrams show all rows in pattern seen from RS. When diagram A.6 and A.1b are repeated, there are more and more sts between YO and dec (dec = slip 2 sts as if to K, K 1, pass the 2 slipped sts over) than shown in diagram, note that the dec will repeat vertically over themselves until finished measurements. ---------------------------------------------------------- SHAWL: Worked top down, back and forth on circular needle to make room for all the sts. Cast on 5 sts on circular needle size 3.5 mm / US 4 with blue. STRIPE 1 (stockinette st): ROW 1 (= WS): * K 1, 1 YO *, repeat from *-* until 1 st remains, K 1 = 9 sts. ROW 2 (= RS): K all sts. ROW 3 (= WS): K 2, * 1 YO, K 1 *, repeat from *-* 6 times in total, finish with K 1 = 15 sts. Then work pattern as follows, beg from RS: Work 2 edge sts in GARTER ST – see explanation above, repeat A.1a 6 times in total but on last repetition do not work last st in diagram (i.e. last repetition = 1 st), finish with 2 edge sts in garter st. Continue pattern like this. Work edge sts in garter st until finished measurements. REMEMBER THE KNITTING GAUGE When A.1a has been worked 1 time vertically, there are 117 sts on needle (= 19 sts in each of the first 5 repetitions of A.1a and 18 sts in the last repetition). Piece measures approx. 12 cm / 4¾'' - READ MEASUREMENTS. STRIPE 2 (lace pattern): Switch color to petrol. Work A.1b over A.1a. Then work lace pattern as follows: Work 2 edge sts in garter st, * A.2 over the next 2 sts, repeat A.3 (= 7 sts) over the next 14 sts (= 2 times in total in width), A.4 over the next 3 sts *, repeat from *-* 5 times in total, then work A.2 over the next 2 sts, repeat A.3 (= 7 m) over the next 14 sts (= 2 times in total in width), A.4 over the next 2 sts (i.e. do not work last st in A.4), finish with 2 edge sts in garter st. Continue pattern like this. When A.2 to A.4 have been worked 1 time vertically, there are 201 sts on needle (= 33 sts in each of the first 5 repetitions of A.2 to A.4 and 32 sts in the last repetition of A.2 to A.4). Work next row as follows from RS: Work 2 edge sts in garter st, repeat A.5a (= 33 sts) 6 times in total in width but on last repetition in width do not work last st in diagram, finish with 2 edge sts in garter st. When A.5a has been worked 1 time vertically, there are 207 sts on needle (= 34 sts in each of the first 5 repetitions and 33 sts in the last repetition). STRIPE 3 (stockinette st): Switch color to green/turquoise. Work A.5b over A.5a. When A.5b has been worked 1 time vertically, there are 255 sts on needle (= 42 sts in each of the first 5 repetitions and 41 sts in the last repetition). Piece measures approx. 26 cm / 10 1/4''. Work 2 edge sts in garter st, work and inc as A.6a 6 times in total but on last repetition in width do not work last st in diagram, finish with 2 edge sts in garter st. When A.6a has been worked 3 times vertically - READ PATTERN, there are 327 sts on needle (= 54 sts in each of the first 5 repetitions of A.6a and 53 sts in the last repetition). Then work A.6b over A.6a (note that dec will continue over itself vertically until finished measurements) AT THE SAME TIME on first row in A.6b dec 4 sts evenly on each side of dec in every A.6b (= 8 sts dec in every A.6b = 48 sts dec in total on entire shawl) = 285 sts on needle (= 47 sts in each of the first 5 repetitions of A.6b and 46 sts in the last repetition). Piece measures approx. 37 cm / 14½''. STRIPE 4 (lace pattern): Switch color to dark purple. Work A.1b over A.6b. Then work lace pattern as follows: Work 2 edge sts in garter st, * A.2 over the next 2 sts, repeat A.3 (= 7 sts) over the next 42 sts (= 6 times in total in width), A.4 over the next 3 sts *, repeat from *-* 5 times in total, then work A.2 over the next 2 sts, repeat A.3 (= 7 m) over the next 42 sts (= 6 times in total in width), A.4 over the next 2 sts (i.e. do not work last st in A.4), finish with 2 edge sts in garter st. Continue pattern like this. When A.2 to A.4 have been worked 1 time vertically, there are 369 sts on needle (= 61 sts in each of the first 5 repetitions of A.2 to A.4 and 60 sts in the last repetition of A.2 to A.4). Work next row as follows from RS: Work 2 edge sts in garter st, repeat A.6b 6 times in total in width but on last repetition do not work last st in diagram, finish with 2 edge sts in garter st = 375 sts (= 62 sts in each of the first 5 repetitions of A.6b and 61 sts in the last repetition). Piece measures approx. 50 cm / 19 3/4''. STRIPE 5 (stockinette st): Switch to blue. Work A.1b AT THE SAME TIME on first row inc 4 sts evenly on each side of dec in every A.1b (= 8 sts inc in every A.1b = 48 sts inc in total on entire shawl) = 423 sts (= 70 sts in each of the first 5 repetitions of A.1b and 69 sts in the last repetition). Work 2 edge sts in garter st, work and inc as A.6a 6 times in total but on last repetition do not work last st in diagram, finish with 2 edge sts in garter st. When A.6a has been worked 3 times vertically, there are 495 sts on needle (= 82 sts in each of the first 5 repetitions of A.6a and 81 sts in the last repetition). then work A.6b over A.6a AT THE SAME TIME on first row in A.6b dec 4 sts evenly on each side of dec in every A.6b (= 8 sts dec in every A.6b = 48 sts dec in total on entire shawl) = 453 sts on needle (= 75 sts in each of the first 5 repetitions of A.6b and 74 sts in the last repetition). Piece measures approx. 61 cm / 24''. STRIPE 6 (lace pattern): Switch color to petrol. Work A.1b over A.6b. Then work lace pattern as follows: Work 2 edge sts in garter st, * A.2 over the next 2 sts, repeat A.3 (= 7 sts) over the next 70 sts (= 10 times in total in width), A.4 over the next 3 sts *, repeat from *-* 5 times in total, then work A.2 over the next 2 sts, repeat A.3 (= 7 sts) over the next 70 sts (= 10 times in total in width), A.4 over the next 2 sts (i.e. do not work last st in A.4), finish with 2 edge sts in garter st. Continue pattern like this. When A.2 to A.4 have been worked 1 time vertically, there are 537 sts on needle (= 89 sts in each of the first 5 repetitions of A.2 to A.4 and 88 sts in the last repetition of A.2 to A.4). Work next row as follows from RS: Work 2 edge sts in garter st, repeat A.6b 6 times in total but on last repetition do not work last st in diagram, finish with 2 edge sts in garter st = 543 sts (= 90 sts in each of the first 5 repetitions of A.6a and 89 sts in the last repetition). Loosely bind off. Piece measures approx. 74 cm / 29''. |
||||||||||||||||||||||
Diagram explanations |
||||||||||||||||||||||
|
||||||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Comments / Questions (43)
Theo wrote:
Goedendag, ik heb de eerste streep gebreid. 117 steken over. Nu moet ik 1b breien maar begrijp niet goed wat er wordt bedoeld met dat er neer steken over zijn en dat die weer geminderd moeten worden. Waar moet ik ze exact minderen? Ik hoop op een spoedig antwoord :-)
23.08.2017 - 20:07DROPS Design answered:
Hallo Theo, Steeds bij het wisselen van kleur brei je A.1b. Bij streep 2 is de uitleg mbt dat er meer steken zijn nog niet van toepassing maar bij de strepen die erop volgen wel. Het gaat er om dat de minderingen in A.1b steeds boven elkaar komen en die minderingen liggen steeds verder uit elkaar. Het wordt waarschijnlijk wel duidelijk tijdens het breien.
28.08.2017 - 12:23Daisy Van De Peppel wrote:
Hallo, ik ben nu 3 keer overnieuw begonnen met het patroon maar kom maar niet na a1 op 117 steken uit. Ik begin bij elke rij met 2 kansteken, brei de herhalingen en de laatste maak ik 1 steek van (dan heb ik erna 3 kantsteken). Klopt dit?
16.08.2017 - 23:24DROPS Design answered:
Hallo Daisy, Op de laatste toer van A.1 heeft A.1 19 steken. Als je A.1 6 keer herhaalt kom je op 114 steken, maar bij de laatste herhaling van A.1 vervalt de laatste steek van A.1. Dus kom je op 113 Steken. Daarnaast brei je aan elke zijkant, dus aan het begin en einde, 2 kantsten. Daarmee kom je op een totaal van 117 steken.
03.11.2017 - 11:06Vera wrote:
Liebes Drops-Team, ich habe beim 3. Streifen schon nach 1x Muster A6a in die Höhe stricken eine Maschenzahl von 54 (bzw. 53) in jedem Rapport. Wie soll das Muster weitergeführt werden, um nicht noch mehr Maschen zu bekommen? Oder muss man eigentlich direkt jedes Hin-und Rückreihenpaar (2 Reihen) dreimal stricken? Danke!!
14.08.2017 - 11:22DROPS Design answered:
Liebe Vera, es werden 4 M in A.6a zugenommen - nach A.5b haben Sie 42 M in jedem der ersten 5 Rapporte + 4 M zugenommen x 3 Rapporte A.6a = 42 + (4x3) = 54 M. Viel Spaß beim stricken!
28.08.2017 - 11:29Daisy wrote:
Goedendag, ik zie overal staan dat je op de laatste herhaling de laatste steek niet breit. Geldt dit dan voor elke toer van het patroon of alleen de eerste? En is dit dan een steek afhalen?
27.07.2017 - 20:13DROPS Design answered:
Hoi Daisy, Dit geldt voor elke toer in het patroon, en alleen voor de laatste herhaling in de breedte. Je hoeft deze steek klaar bent met de 6 herhalingen van A.1 in de breedte, heb je 2 steken over op de naald voor de kantsteken in ribbelsteek.
30.07.2017 - 20:56Dekepper wrote:
Bonjour, j'ai déjà fait le motif 6a ,2 fois en hauteur, j'ai bien diminué au même endroit et je me retrouve déjà avec 50 mailles dans chaque motifs il faut que je fasse encore une foi en hauteur ,je vais me retrouver avec plus de 54 mailles que dois je faire ?
02.06.2017 - 17:32DROPS Design answered:
Bonjour Mme Dekepper, quand on tricote 1 fois A.6a, on augmente 4 m au total, vous devez ainsi avoir dans chacun des 5 premiers motifs: 42 m (après A.5b) + (3 fois A.6a en hauteur x 4 augm) = 42+ 12 = 54 m. Bon tricot!
06.06.2017 - 08:27Dekepper wrote:
Je comprend bien qu' il faut prendre les jetés sur l'endroit au rang 36, mais au rang 35 il y bien des jetés qu'il faut prendre normal et 1 torse?
28.04.2017 - 13:00DROPS Design answered:
Bonjour Mme Dekepper, effectivement, un des 3 jetés sera tricoté torse, autant pour moi, les jetés (= ovale simple) se tricotent normalement et les jetés (= ovale noir) se tricotent torse au rang suivant, donc sur ces rangs endroit sur l'envers, ils vont se tricoter torse à l'endroit. Bon tricot!
28.04.2017 - 13:53Dekepper wrote:
Bonjour, pour le rang de mailles endroit sur l'envers doit on prendre les jetés sur l'endroit où sur l' envers ?
28.04.2017 - 11:23DROPS Design answered:
Bonjour Mme Dekepper, à la fin de A.1, quand on tricote les 2 rangs à l'endroit sur l'envers, on tricote les jetés également à l'endroit (pas torse pour qu'ils forment des trous). Bon tricot!
28.04.2017 - 11:53Dekepper wrote:
Bonjour, pouvez vous m'aider après avoir fait mon premier motif A1a je me retrouve avec bien 117 mailles et pourtant la dernière mailles je l'ai tricoté en tant que maille lisière et étant donné que le 6eme motif on ne tricote pas la dernière maille je ne comprend plus!!!
21.04.2017 - 18:04DROPS Design answered:
Bonjour Mme Dekepper, c'est tout à fait juste ainsi: 2 m lis point mousse, puis 5 x A.1 (= 19 m a dernier rang) puis 1 x A.1 (= 18 m au dernier rang), 2 m lis = 2+ 5x19 + 18 + 2 = 117 m. Bon tricot!
24.04.2017 - 08:42Dekepper wrote:
Bonjour, pour le premier motif A1.a je me retrouve bien avec 117 mailles en faisant bien à la fin de chaque rangs 1 jeté, 2 mailles lisières.Je comprend pas pour le 6ème motif =1 mailles en moins,car il faut quand même les deux mailles lisières .Pouvez vous m'aider?
21.04.2017 - 10:25DROPS Design answered:
Bonjour Mme Dekepper, c'est exact, vous tricotez 5 x A.1 (= 2 m au 1er rang, et 19 m au dernier rang) mais au dernier (= 6ème) motif de A.1, vous ne tricotez pas la dernière maille (= 1 m au 1er rang et 18 m au dernier rang), soit: 19x5 + 18 + les m lis soit 2x2 m = 117 m. Bon tricot!
21.04.2017 - 10:58Sandrine wrote:
Bonjour. Pour la rayure 3 il est indiqué de tricoter 3 fois le diagramme A6a. J'ai tricoté une première fois le diagramme sans soucis. En revanche pour la deuxième fois je ne sais comment faire le premier rang car j'ai 4 mailles "en trop" dans chaque répétition horizontale. Pouvez vous m'aider à trouver une solution svp ?
19.04.2017 - 15:02DROPS Design answered:
Bonjour Sandrine, Dans chaque motif de A.6a, on augmente 4 m au total (= 2 de chaque côté de la diminution). Quand vous répétez A.6a en hauteur, augmentez au début et à la fin de chaque motif comme dans le diagramme et diminuez au milieu comme avant (les diminutions doivent être alignées les unes au-dessus des autres). Bon tricot!
19.04.2017 - 15:49