Warm Apricot |
||||||||||||||||||||||
|
||||||||||||||||||||||
Crochet DROPS top with lace pattern and raglan in ”Safran”. The piece is worked top down. Size: S - XXXL.
DROPS Extra 0-1287 |
||||||||||||||||||||||
PATTERN: See diagrams A.1. CROCHET INFO: Replace first dc at on every dc round with ch 3, finish the round with 1 sl st in 3rd ch from beg of round. On every sc round, replace first sc with 1 ch and finish round with 1 sl st in 1st ch from beg of round. INCREASE TIP-1: Inc 1 dc by working 2 dc in same dc. INCREASE TIP-2 (applies to sides of body): Work until 3 dc remain before marker thread, work 2 dc in next dc (= 1 dc inc), work 1 dc in each of the next 4 dc (marker thread is in the middle of these sts), work 2 dc in next dc (= 1 dc inc). RAGLAN: Inc for raglan on each side of A.1. Inc 2 sts BEFORE A.1 as follows: Work until 2 dc remain before A.1, work 2 dc in each of the next 2 dc (= 2 dc inc). Inc 2 sts AFTER A.1 as follows: Work 2 dc in each of the first 2 dc after A.1 (= 2 dc inc). Inc 1 sts BEFORE A.1 as follows: Work until 1 dc remains before A.1, work 2 dc in next dc (= 1 dc inc). Inc 1 sts AFTER A.1 as follows: Work 2 dc in first dc after A.1 (= 1 dc inc). The inc on body and sleeves are uneven as explained in pattern. DECREASE TIP: Work until 4 dc remain before marker thread, work the next 2 dc tog as follows: Work 1 dc in next dc but wait with last pull through (= 2 sts on hook), work 1 dc in next dc, but on last pull through pull yarn through all sts on hook - 1 dc have been dec, work 1 dc in each of the next 4 dc (marker thread is between these sts), work the next 2 dc tog (= 1 dc dec). ---------------------------------------------------------- YOKE: The piece is worked top down. Work 161-166-171-176-181-186 ch on hook size 3.5 mm/E/4 with Safran. Work next round as follows: Work 1 dc in 4th ch from hook (= 2 dc) - READ CROCHET INFO, 1 dc in each of the next ch 2, * skip ch 1, 1 dc in each of the next 4 ch *, repeat from *-* the entire row = 128-132-136-140-144-148 dc. Then work next round as follows: Work 1 dc in each of the first 18-19-20-21-22-23 dc AT THE SAME TIME inc 4-5-5-6-7-8 dc evenly – READ INCREASE TIP-1 – (= half back piece), A.1 over the next 11 dc, 2 dc in next dc, 1 dc in each of the next 4 dc, 2 dc in next dc, A.1 over the next 11 dc (= sleeve), 1 dc in each of the next 36-38-40-42-44-46 dc AT THE SAME TIME inc 8-10-10-12-14-16 dc evenly (= front piece), A.1 over the next 11 dc, 2 dc in next dc, 1 dc in each of the next 4 dc, 2 dc in next dc, A.1 over the next 11 dc (= sleeve), 1 dc in each of the last 18-19-20-21-22-23 dc AT THE SAME TIME inc 4-5-5-6-7-8 dc evenly. On front and back piece there are now 44-48-50-54-58-62 dc and on sleeve there are A.1, 8 dc and A.1. On next round inc for RAGLAN – see explanation above! INC AS FOLLOWS ON FRONT AND BACK PIECE: Inc 2 dc every round 3-4-7-9-13-16 times in total, then 1 dc every round 12-12-10-9-6-5 times in total. INC AS FOLLOWS ON SLEEVES: Inc 2 dc every round 0-0-1-3-4-4 times in total, then 1 dc every round 15-16-16-15-15-17 times in total. REMEMBER THE CROCHET GAUGE! When A.1 have been worked 1 time vertically, repeat A.1a over A.1. After all inc there are 80-88-98-108-122-136 dc on front piece and back piece, on sleeve there are A.1, 38-40-44-50-54-58 dc and A.1. Piece measures approx. 14-15-16-17-18-19 cm / 5½''-6''-6¼''-6¾''-7''-7½''. Work next round as follows: Work 1 dc in each of the first 40-44-49-54-61-68 dc, work 8 ch (= under sleeve), insert 1 marker thread in the middle between the new ch, skip: A.1a, 38-40-44-50-54-58 dc and A.1a (= sleeve), work 1 dc in each of the next 80-88-98-108-122-136 dc, 8 ch (= under sleeve), insert 1 marker thread in the middle of the new sts, skip: A.1a and 38-40-44-50-54-58 dc and A.1a (= sleeve), work 1 dc in each of the next 40-44-49-54-61-68 dc = 160-176-196-216-244-272 dc and 16 ch. Insert 1 marker in piece, NOW MEASURE PIECE FROM HERE. Move marker threads when working, leave the marker in piece. BODY: Work 1 dc in every dc, 1 dc in every ch. There are 88-96-106-116-130-144 dc between marker threads on back piece and front piece. When piece measures 3 cm / 1'' (measured from marker), dec 1 st on each side of each marker thread in the side (= 4 sts dec) - READ DECREASE TIP! Repeat dec every 4-4-3½-4½-4½-4½ cm / 1½"-1½"-1 1/4"-1 3/4"-1 3/4"-1 3/4" 3-3-4-3-3-4 more times = 160-176-192-216-244-268 dc in total. When piece measures 17-18-19-20-21-22 cm / 6¾''-7''-7½''-8''-8¼''-8¾'' (measured from marker), inc 1 st on each side of each marker thread (= 4 dc inc) – see INCREASE TIP-2. Repeat inc every 1½ cm / ½'' 6-6-7-6-6-7 more times = 188-204-224-244-272-300 dc. Continue with 1 dc in every dc until piece measures 32-33-34-35-36-37 cm / 12½''-13½''-13 3/8''-13¾''-14¼''-14½'' (measured from marker). Piece measures approx. 46-48-50-52-54-56 cm / 18''-19''-19¾''-20½''-21¼''-22'' in total from neck edge. Work 1 edge around the top as follows: Work * 1 sc in first/next dc, ch 4, skip approx. 1 cm / 3/8'' *, repeat from *-* around the entire top. Fasten off. SLEEVE EDGE: Sleeve is worked in the round, top down. Beg by working mid under sleeve as follows: Work 1 sc in 5th ch of the 8 ch worked in armhole on body. Work 3 ch (= 1 dc). Then work with 1 dc in each of the next ch 3, A.1a as before, 1 dc in each of the next 38-40-44-50-54-58 dc, A.1a as before, 1 dc in each of the last 4 ch under sleeve, finish with 1 sl st in 3rd ch at beg of round. Work 1 dc in every dc and A.1a until 1 whole repetition of A.1a has been worked. Then work 1 dc in every dc, work A.1b over A.1a = 68-70-74-80-84-88 dc. On next round work 1 dc in every dc AT THE SAME TIME dec 12 dc evenly = 56-58-62-68-72-76 dc. Work 1 dc in every dc until sleeve edge measures approx. 4 cm / 1½''. Work * 1 sc in first/next dc, ch 4, skip approx. 1 cm / 3/8'' *, repeat from *-* around the entire sleeve. Fasten off. Work a sleeve edge around the other sleeve. NECK EDGE: Beg mid back. Work ch 1, * 1 sc in first/next dc, ch 4, skip approx. 1 cm / 3/8'' *, repeat from *-* around the entire neck, finish with 1 sl st in first ch, make sure to avoid a tight neck edge. |
||||||||||||||||||||||
Diagram explanations |
||||||||||||||||||||||
|
||||||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Comments / Questions (70)
Sheryl Barreto wrote:
Is this worked as one open piece and ten sewn behind at the end?
02.07.2021 - 16:00DROPS Design answered:
Dear Sheryl, no, this piece is crocheted in one piece, on the round and only a few stitches sewing required at the end (under the arms). Happy stitching!
03.07.2021 - 06:34Simona Serini wrote:
Per una circonferenza di seno di 104 cm, che taglia devo calcolare? Grazie
10.06.2021 - 09:55DROPS Design answered:
Buongiorno Simona, trova lo schema delle taglie in fondo alla pagina, potrebbe provare una taglia L o XL: provi a confrontare le misure con quelle di un modello simile che ha già. Buon lavoro!
11.06.2021 - 07:54Anita wrote:
Dzień dobry, jak rozumiem całość ma być połączona na plecach. W jaki sposób to zrobić ? Dziękuję
24.04.2021 - 13:24DROPS Design answered:
Witaj Anito, ten sweterek jest przerabiany na okrągło, nie trzeba go zszywać/łączyć na plecach. Pozdrawiamy!
26.04.2021 - 08:39Claudia wrote:
Hola! Perdon pero no me queda muy claro si se trabaja en redondo o de ida y vuelta? Les agradeceria si me lo explicaran. Gracias!
07.11.2020 - 00:52DROPS Design answered:
Hola Claudia, la labor se trabaja en redondo; cada vuelta se termina con 1 punto enano en la 3ª cadeneta/1ª cadeneta del inicio de la vuelta.
19.11.2020 - 20:58Sara wrote:
Danke für die schöne Anleitung. Leider enthält die Anleitung auf Deutsch einige Flüchtigkeitsfehler, die mich manchmal ins Stolpern gebracht habe. Anstelle der Abkürzung Rd für Runde wird manchmal R verwendet, was aber für Reihe steht, welche in dieser Anleitung gar nicht vorhanden sind. Im ersten Satz des Abschnitts "Rumpfteil" wird A1a erwähnt, obwohl gar nicht mit A1a weiter gehäkelt wird. Ansonsten eine wirklich schöne Arbeit, die Freude beim Häkeln macht.
09.09.2020 - 15:02DROPS Design answered:
Liebe Sara, vielen Dank für Ihre Anmerkungen! Die Anleitung wurde nun korrigiert. Viel Spaß beim Weiterhäkeln und beim Tragen dieses schönen Tops! :-)
09.09.2020 - 21:01Katharina wrote:
Hallo, ich habe eine Frage zum Muster. Wird A. 1a immer nur wiederholt oder auch A 1b? Das Bild sieht so aus, dass nur A 1a wiederholt wird. Vielen Dank für die Antwort. Katharina
14.06.2020 - 13:21Silvia wrote:
Buongiorno, ho inteso che la maglia é lavorata in tondo top down, ma non capisco quando chiudere il cerchio: il modello dice di lavorare tot catenelle per lo sprone, ma non di chiudere il cerchio con una maglia bassissima nella prima catenella e continuare a lavorare in tondo. Nonostante questo, non c'é scritto da nessuna parte di girare il lavoro. È poco chiaro
29.05.2020 - 15:41DROPS Design answered:
Buonasera Silvia, questa maglia è lavorata in tondo, infatti il 1° giro inizia con 1 maglia alta nella 4° catenella. Si ricordi di leggere il suggerimento per il lavoro, per l'inizio e la fine dei giri. Buon lavoro!
31.05.2020 - 20:49Ana Mafalda Faria wrote:
Olá. Só para confirmar: a peça crocheta-se de cima para baixo, em redondo, e a peça não se vira após cada volta, certo? Obrigado
29.03.2020 - 20:05Elisabeth wrote:
Bonjour, pour les augmentations (top taille XL) : est-ce 2 brides par tour pendant 9 tours puis 1 bride pendant 9 tours? ou est-ce 9 x 2 brides par tour et dans ce cas combien de tours faut-il pour arrêter les augmentations? même question pour l'augmentation d'une bride. Merci d'avance pour votre réponse
27.03.2020 - 18:56DROPS Design answered:
Bonjour Elisabeth, les augmentations dos/devant ne se font pas au même rythme que celles des manches, vous augmentez pour le dos/le devant: 9x 2 brides tous les tours + 9 x 1 b tous les tours (= 18 tours au total) et sur les manches: 3 x 2 b tous les tours + 15 fois 1 b tous les tours (= 18 tours au total) = vous augmenterez ainsi par tour: 16 brides (= 2 brides dos/devant/manches) au début puis 12 brides (= 2 brides dos/devant mais 1 bride manches) et enfin 8 brides (= 1 bride dos/devant/manches). Bon crochet!
30.03.2020 - 08:45Bonnie Carter wrote:
Just to let you know, I went into pattern for American English and British English and they both said, "..... All measurements in charts are in cm. For conversion from inches to cm - click here. " I was hoping for a diagram showing inches, but both appear to have cm. Please advise. Thank you.
12.03.2020 - 20:15DROPS Design answered:
Dear Mrs Carter, the US-English written pattern includes measurements in both cm and inches, but measurement chart will be only in cm - you can convert them into inches here. Happy crocheting!
13.03.2020 - 08:51