DROPS Muskat
DROPS Muskat
100% Cotton
from 1.95 $ /50g
Get the yarn to make this pattern from 19.50$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Seashore Bliss

Crochet DROPS jumper with lace pattern and round yoke in ”Muskat”. The piece is worked top down. Size: S - XXXL.

DROPS 169-15
DROPS design: Pattern no r-699
Yarn group B
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS MUSKAT from Garnstudio
500-550-600-650-700-750 g color no 18, white

DROPS CROCHET Hook size 4 mm / G/6 – or size needed to get 18 dc x 9 rows = 4'' x 4'' (10 x 10 cm).

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Muskat
DROPS Muskat
100% Cotton
from 1.95 $ /50g
Get the yarn to make this pattern from 19.50$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
PATTERN:
See diagrams A.1 to A.4. Diagram A.4 shows how round beg and ends.

CROCHET INFO:
Replace first dc at beg of every dc round with 3 ch. Finish round with 1 sl st in 3rd ch at beg of round.
Replace first sc at beg of every sc round with 1 ch. Finish every round with 1 sl st in ch from beg of round.

INCREASE TIP:
Inc 1 dc by working 2 dc in same dc.

DECREASE TIP:
Dec 1 dc by working 2 dc tog as follows: Work 1 dc but wait with last pull through (= 2 sts on hook), then work next dc but on last pull through, pull yarn through all 3 sts on hook.

TIP ARMHOLE:
Size S, M and XL: In the last repeat of A.1 before marker 1 and marker 3 (= beginning of armhole), replace the last chain stitch with a double crochet in the last stitch of the same repeat on previous row.
----------------------------------------------------------

JUMPER:
The piece is worked top down. NOTE: It is important to keep the crochet gauge vertically so that the measurements on yoke will be correct.

YOKE:
Work 108-108-117-117-124-124 ch on hook size 4 mm / G/6 with Muskat and form 1 ring with 1 sl st in first ch. Work first round as follows: Work 3 ch (= 1 dc) - READ CROCHET INFO, 1 dc in each of the next 3-3-5-5-5-5 ch, * skip ch 1, 1 dc in each of the next 6 ch *, repeat from *-* the entire row = 94-94-102-102-108-108 dc. Work 1 round with 1 dc in every dc and inc 18-18-22-22-28-40 dc evenly - READ INCREASE TIP = 112-112-124-124-136-148 dc. Work next round and insert 8 markers in the piece as follows: A.4 shows how round beg and ends. Insert 1st marker at beg of round, work A.2 over the first 4 dc, insert 2nd marker, A.1 over the next 12 dc (= 2 times in width), insert 3rd marker, A.2 over the next 4 dc, insert 4th marker, work A.1 over the next 36-36-42-42-48-54 dc (= 6-6-7-7-8-9 times in width), insert 5th marker, A.2 over the next 4 dc, insert 6th marker, A.1 over the next 12 dc (= 2 times in width), insert 7th marker, A.2 over the next 4 dc, insert 8th marker, A.1 over the last 36-36-42-42-48-54 dc (= 6-6-7-7-8-9 times in width). REMEMBER THE CROCHET GAUGE!

SIZE XXL-XXXL:
On 5th round (round with dc) in A.1 inc evenly as follows:
Between 2nd and 3rd marker and 6th and 7th marker: Inc 6-6 dc.
12-12 dc have been inc in total on round (= 18-18 dc between 2nd and 3rd marker and 6th and 7th marker). Repeat A.1 3-3 times between 2nd and 3rd marker and between 6th and 7th marker:

ALL SIZES:
On 6th round (round with dc) in A.1 inc evenly as follows:
Between 2nd and 3rd marker and 6th and 7th marker: Inc 0-0-6-6-6-6 dc (= 12-12-18-18-24-24 dc between these markers).
Between 4th and 5th marker and 8th and 1st marker: Inc 0-6-6-6-6-6 dc (= 36-42-48-48-54-60 dc between each of these markers). Then repeat diagram A.1 2-2-3-3-4-4 times between 2nd and 3rd marker, 6-7-8-8-9-10 times between 4th and 5th marker, 2-2-3-3-4-4 times between 6th and 7th marker and 6-7-8-8-9-10 times between 8th and 1st marker. Work A.2 as before.

SIZE XL-XXL-XXXL:
On 8th round (round with dc) in A.1 inc evenly as follows:
Between 4th and 5th marker and 8th and 1st marker: Inc 6-6-6 dc (= 54-60-66 dc between each of these markers).
12-12-12 dc have been inc in total on round. Repeat A.1 9-10-11 times between 4th and 5th marker and between 8th and 1st marker. Repeat inc on 10th round in A.1 (= 60-66-72 dc between each of these markers). Repeat diagram A.1 10-11-12 times between 4th and 5th marker and between 8th and 1st marker.

ALL SIZES:
On last round in A.2 insert 1 new marker in the middle of each A.2 (i.e. 18 dc on each side of marker in A.2 = 4 markers). Remove the old markers (= 4 markers remain in piece). Sts between markers are for sleeves (= 48-48-54-54-60-60 dc on each sleeve). When A.2 has been worked 1 time vertically, there are 240-252-276-300-324-336 dc on round. Yoke is now done in size S.

SIZE M-L-XL-XXL-XXXL:
Continue with pattern A.1 as before but over dc in A.2 (= 36 dc) work A.3 2 times in total in width (marker is in the middle of these repetitions). Work 1-2-3-4-5 rounds of A.3 (see arrow in diagram for correct size). Piece now measures 17-18-19-20-21-22 cm / 6¾''-7''-7½''-8''-8¼''-8¾'' vertically.

ALL SIZES:
Work A.1a (see arrow on where pattern beg in the different sizes) 3 times in total in width until first marker, work 8-8-8-10-10-10 ch, skip sts between the 2 markers (= sleeve), work A.1a 12-13-14-16-17-18 times in total in width until next marker (= front piece), work 8-8-8-10-10-10 ch, skip sts between the 2 markers (= sleeve), work A.1a 9-10-11-13-14-15 times in total in width (= 160-172-184-212-224-236 sts). Fasten off.

BODY:
Beg round mid under sleeve as follows:

Size S-L:
Work 1 sl st in 5th ch, ch 1, work 1 sc in each of the next 3-3 ch, work A.1a as before until ch under 2nd sleeve, 1 sc in each of the 8-8 ch under sleeve, work A.1a as before the rest of round. Work the 8-8 sts under each sleeve as 1st st in A.1a.

SIZE M-XL-XXL-XXXL:
Work 1 sl st in 5th ch, ch 3, work 1 dc in each of the next 3-5-5-5 ch, work A.1a as before until ch under 2nd sleeve, 1 dc in each of the 8-10-10-10 ch under sleeve, work A.1a as before the rest of round. Work the 8-10-10-10 sts under each sleeve as 1st st in A.1a.

ALL SIZES:
Insert 1 marker in piece, NOW MEASURE PIECE FROM HERE.
On first round with dc dec 4-4-4-2-2-2 dc evenly - READ DECREASE TIP = 156-168-180-210-222-234 dc. Then repeat A.1a 26-28-30-35-37-39 times in width. Repeat A.1a vertically. When piece measures 12 cm / 4¾'', adjust so that next round is with dc, dec 6 dc evenly = 150-162-174-204-216-228 dc. Now repeat A.1a 25-27-29-34-36-38 times in width.

SIZE XL:
Repeat dec when piece measures 16 cm / 6 1/4'' from marker = 198 dc. Now repeat A.1a 33 times in width.

ALL SIZES:
When piece measures 20-21-22-23-24-25 cm / 8''-8¼''-8¾''-9''-9½''-9¾'' from marker – adjust so that next round is with dc, inc 6 dc evenly. Repeat inc every 2-2-1½-1½-1½-1½ cm / 3/4"-3/4"-½"-½"-½"-½" 5-5-7-7-7-7 more times = 186-198-222-246-264-276 dc. Repeat A.1a 1 more in width on every inc. When all inc are done, repeat A.1a 31-33-37-41-44-46 times in width. Work until piece measures 36-37-38-39-40-41 cm / 14¼''-14½''-15''-14 1/4''-15¾''-16 1/8" from marker, adjust to finish nicely according to pattern. Fasten off.

SLEEVE:
SIZE S:
Beg by working mid under sleeve as follows: Work 1 sl st in 4th ch of the 8 ch worked in armhole on body. Work 1 ch (= 1 sc). Then work 1 sc in each of the next ch 4, work A.3 over the next 18 dc, work A.1 (adjust pattern according to A.3) 2 times in total in width as before, work A.3 over the next 18 dc, finish with 1 sc in each of the last 3 ch. Work as 1st st in A.3 in the 8 sts under sleeve. When A.3 has been worked 1 time vertically, there are 56 dc on last round.

SIZE M-XL-XXL:
Beg by working mid under sleeve as follows: Work 1 sl st in 4th ch of the 8-10-10 ch worked in armhole on body. Work 3 ch (= 1 dc). Then work 1 dc in each of the next 4-6-6 ch, work A.3 as before, work A.1 (adjust pattern according to A.3) 2-3-4 times in total in width as before, work A.3, finish with 1 dc in each of the last 3 ch. Work as 1st st in A.3 in the 8-10-10-10 dc under sleeve. When A.3 has been worked 1 time vertically, there are 56-64-70 dc on last round.

SIZE L:
Beg by working mid under sleeve as follows: Work 1 sl st in 4th ch of the 8 ch worked in armhole on body. Work 1 ch (= 1 sc). Then work 1 sc in each of the next ch 4, work A.3 as before, work A.1 (adjust pattern according to A.3) 3 times in total in width as before, work A.3, finish with 1 sc in each of the last 3 ch. Work as 1st st in A.3 in the 8 dc under sleeve. When A.3 has been worked 1 time vertically, there are 62 dc on last round.

SIZE XXXL:
Beg by working mid under sleeve as follows: Work 1 sl st in 4th ch of the 10 ch worked in armhole on body. Work 3 ch (= 1 dc). Then work 1 dc in each of the next ch 6, work A.1a over the next 60 dc, finish with 1 dc in each of the last 3 ch = 70 dc.

ALL SIZES:
= 56-56-62-64-70-70 dc. Repeat A.1a vertically until finished measurements. On first round with dc dec 2-2-2-4-4-4 dc evenly = 54-54-60-60-66-66 dc. Repeat A.1a 9-9-10-10-11-11 times in total in width. When piece measures 10 cm / 4'', adjust so that next round is with dc, dec 6 dc evenly = 48-48-54-54-60-60 dc. Then repeat A.1a 8-8-9-9-10-10 times in width. When piece measures 23 cm / 9'', adjust to finish nicely according to pattern, fasten off. Work another sleeve the same way.

NECK EDGE:
Crochet an edge around the neck. Beg mid back. Work * 1 sc in first dc, ch 3, skip approx. 1 cm / 3/8'' *, repeat from *-* around the entire neck. Make sure to avoid a tight neck edge, adjust to finish with 1 sl st in first ch. Fasten off.

This pattern has been corrected.

Updated online: 29.06.2018
armhole tip has been added.

Diagram

All measurements in charts are in cm.

symbols = ch
symbols = sc in st
symbols = sc between 2 dc
symbols = sc around ch
symbols = dc in st
symbols = dc around ch
symbols = this round is not worked, it has already been worked, it only shows how next round should be worked in st
symbols = sl st
symbols = first round in diagram
diagram
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 169-15

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (132)

country flag Séverine wrote:

Ce modèle est truffé d'erreurs et très mal traduit. Vous avez de beaux modèles mais les traductions sont très mauvaises. Les explications sont très floues, mal agencées par rapport à l'évolution du travail. Decue+++++

14.03.2024 - 14:39

DROPS Design answered:

Bonjour Séverine, si vous avez repéré des erreurs, n'hésitez pas à les communiquer pour qu'elles soient corrigées; si vous avez besoin d'aide pour la réalisation de ce modèle, n'hésitez pas à utiliser cet espace pour poser vos questions afin que nous puissions essayer de vous aider. Bon crochet!

14.03.2024 - 16:27

country flag Jeannette Pedersen wrote:

Hej jeg forstå ikke udtganingen i omgang 5 har sat mærketråd

22.02.2024 - 11:51

DROPS Design answered:

Hei Jeannette. Husk les øketips øverst i oppskriften (ØKETIPS: Det økes 1 st ved å hekle 2 st i samme st. ) Så i str. XXL og XXXL økes det 6 masker mellom 2. og 3. merketråd jevnt fordelt og det økes 6 masker mellom 6. og 7.merketråd jevnt fordelt. mvh DROPS Design

26.02.2024 - 13:51

country flag Michelle wrote:

Is this worked in the round? It doesnt say anywhere

23.11.2023 - 12:01

DROPS Design answered:

Dear Michelle, correct, the whole piece is worked in the round. Happy crocheting!

23.11.2023 - 15:38

country flag Paloma wrote:

Hola: Creo que estoy interpretando algo mal. En base a la explicación del canesú terminaríamos con 3 vueltas, y después está la explicación para las tallas XXL-XXXL, que empieza en la 5ª, y la de TODAS LAS TALLAS, que empieza en la 6ª. Yo soy talla L, ¿qué tengo que hacer en las filas 4 y 5? Gracias.

19.09.2023 - 17:31

DROPS Design answered:

Hola Paloma, tienes que seguir trabajando el patrón como se estableció en la vuelta 3. trabajando las siguientes 2 filas de los diagramas A.1 y A.2.

25.09.2023 - 00:58

country flag Susan M Skypeck wrote:

What is the pattern correction for 169-15.? All I see in the directions is "armhole tip added" but no explanation. What's the "tip"? Thank you

26.08.2023 - 12:24

DROPS Design answered:

Dear Mrs Skypeck, this tip has been added at the top of the pattern, see TIP ARMHOLE: - this applies only if you printed the pattern before the correction has been made. Happy crocheting!

28.08.2023 - 16:47

country flag Delia Molinario wrote:

Buongiorno, ho quasi finito lo sprone (Taglia M) ma ho un dubbio e non so come procedere: l'ultimo giro del diagramma A2 (quello dove sposto i marcapunti) a quale giro del diagramma A1 corrisponde? Essendoci 14 giri nel diagramma A2 e dovendo ripetere contemporaneamente A1, l'ultimo giro di A2 corrisponde al quarto di A1...è giusto?

23.08.2023 - 15:01

DROPS Design answered:

Buomgiorno Dalia, se ha finito il diagramma A.1,può riprenderlo da capo. Buon lavoro!

23.08.2023 - 15:45

country flag Airashii wrote:

Hi. Exactly that is what I do not understand: "work sc (US-English) under sleeves and next row in A.1a over all remaining stitches (just as before)". Row with the arrow begins with sc (division for armholes), the beginning for body is mid under sleeve and starts with sc, next row in A1.a (body) starts with dc (dc, ch2, sc, ch2, sc, ch2), the instructions are also "work the 8-8 sts under each sleeve as 1st st in A.1a". This does not match (sc-dc). I am confused.

22.06.2023 - 16:45

DROPS Design answered:

Dear Airashii, on the first round of sleeve you should also work sc mid under sleeves - see SLEEVE: SIZE S: - so work first sc and continue as the next row in A.1 over all stitches. Happy crocheting!

22.06.2023 - 17:28

country flag Airashii wrote:

Hi. I need additional help. :/ Which row on diagram A.1a should I do on 2nd round for body size S (the row with arrow (*sc, ch3, dc, ch3*) again, like in the 1st round?)? Thank you for your help.

21.06.2023 - 21:06

DROPS Design answered:

Dear Airashii, when you have worked the row with the arrow you have divided piece for armhole and you continue now working body in the round, work as explained under BODY: Beg round mid under sleeve as follows: Size S-L: this means you will work sc (US-English) under sleeves and next row in A.1a over all remaining stitches (just as before). On next round work ALL SIZES continue A.1a and decrease as explained. Happy crocheting!

22.06.2023 - 09:58

country flag Airashii wrote:

Hi Drops Team. I am doing yoke and I do not know what should I do in 6th round - as I understand there are no increases for size S in this round, but I do not know what do you mean by "then repeat diagram A.1 2-2-3-3-4-4 times between M2 &M3 ...". Should I just work diagrams A.1 and A.2 normally? How many stitches should I have after finishing 6th round (size S)? Many thanks for your help.

21.06.2023 - 07:28

DROPS Design answered:

Dear Airashii , there is no extra increases in size S, so just work the diagrams as before, increasing in each A.2 just as shown in the diagram. Happy crocheting!

21.06.2023 - 08:14

country flag Carmen wrote:

Buongiorno, non capisco cosa indicano le lettere A1, A2, A3

09.04.2023 - 21:07

DROPS Design answered:

Buonasera Carmen, A,1, A.2 e A.3 rappresentano i diagrammi che può trovare alla fine della pagina. Buon lavoro!

11.04.2023 - 22:43