DROPS Safran
DROPS Safran
100% Cotton
from 1.45 $ /50g
Get the yarn to make this pattern from 5.80$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 170-15
DROPS design: Pattern no e-237
Yarn group A
----------------------------------------------------------
BIKINI TOP:
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS SAFRAN from Garnstudio
100-100-100-100-100-150 g color no 11, strong yellow

BIKINI PANTIES:
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS SAFRAN from Garnstudio
100-150-150-150-150 g color no 11, strong yellow

NOTE: Yarn amount is given for each piece, but if both pieces are made in one color you will need 200-200-200-250-250-250 g Safran in total.

DROPS CROCHET HOOK SIZE 2.5 mm/C – or size needed to get 28 dc x 16 rows and 28 sc x 35 rows = 4'' x 4'' (10 x 10 cm).

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

More like this:
Women Bikinislace
DROPS Safran
DROPS Safran
100% Cotton
from 1.45 $ /50g
Get the yarn to make this pattern from 5.80$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
CROCHET INFO:
On first row in piece work first dc in 5th ch from hook (= 2 dc).
Replace first dc at beg of every dc row with 3 ch.
Replace first sc at beg of every sc row with 1 ch.
----------------------------------------------------------

BIKINI TOP:
First work 2 loose bra cups. The work the 2 bra cups tog.

BRA CUP:
Work 21-24-27-27-32-38 ch with Safran on hook size 2.5 mm/C. Work back and forth as follows (1st row = from RS): Work 1 dc in 5th ch from hook (= 2 dc) - READ CROCHET INFO, then work 1 dc in each of the next 15-18-21-21-26-32 ch, work (2 dc, ch 1, 2 dc) in the last ch on row, rotate piece, skip last ch (i.e. ch just worked in) and continue with 1 dc in each of the remaining 17-20-23-23-28-34 ch on the other side of ch-row = 38-44-50-50-60-72 dc + 1 ch. Turn piece and continue back and forth with 1 dc in every dc on each side of ch-row and work (2 dc, ch 1, 2 dc) around ch at the top of each row. REMEMBER THE CROCHET GAUGE! Continue like this until 11-12-13-14-14-15 rows in total with dc have been worked, but on last row adjust no of sts so that there are 40-44-48-52-56-64 dc on each side of ch at the top (= 80-88-96-104-112-128 dc in total). Piece measures approx. 7-7½-8-9-9-9½ cm / 2 3/4"-2 7/8"-3 1/8"-3½"-3½"-3 3/4" from ch-row and outwards. NOTE: Next row worked is from RS. I.e. the yarn must be cut in size S, L and XXXL before continuing.
Now work an edge as follows:
ROW 1 (= RS): Work * 1 dc, ch 1, skip next dc *, repeat from *-* until 2 dc remain before ch at the top of bra cup, work 1 dc in next dc, ch 1, 1 dc in next dc (= last dc before ch at the top), work (1 ch, 1 dc, ch 1, 1 dc, 1 ch) around ch, then work the same way but reversed down on opposite side of bra cup as follows: Work 1 dc in first dc after ch at the top, ch 1, 1 dc in next dc, continue with * ch 1, skip next dc, 1 dc *, repeat from *-* the rest of the row.
ROW 2: Turn and work 1 sc in first dc, * work ch 3, skip (1 ch, 1 dc, 1 ch), 1 sc in next dc *, repeat from *-* up to ch at the top of bra cup but work last sc around the middle ch at the top of bra cup. Then work ch for tie by working ch for 85-90-90-95-100-100 cm / 33½"-35½"-35½"-37½"-39½"-39½" (measured from the top of bra cup). Turn and work 1 sl st in every ch. NOTE: Make sure that sl sts does not tighten ch row. Then work reversed of the other side of bra cup as follows: 1 sc around ch-space at the top of bra cup (i.e. there are 2 sc around same ch-space), * work ch 3, skip (1 ch, 1 dc, 1 ch), 1 sc in next dc *, repeat from *-* down along the entire edge. Cut the yarn.
Work another bra cup the same way.

Now work the 2 bra cups tog into a top. NOTE: Make sure to work over both bra cups seen from RS.
ROW 1 (= RS): Work 47-56-65-75-84-98 loose ch and insert a marker in the first ch worked (work an edge beg from this marker later in piece). Then work 48-50-53-56-59-62 sc evenly around the outermost dc/sc (i.e. along edge at the bottom on one bra cup), work 1 ch (= between the 2 bra cups), work 48-50-53-56-59-62 sc evenly around the outermost dc/sc (i.e. along edge at the bottom on the other bra cup), them work 47-56-65-75-84-98 loose ch (includes 1 ch to turn with) at the end of row = 191-213-237-263-287-321 sts.
ROW 2: Work 1 sc in 2nd ch from hook (= 2 sc), work 1 sc in each of the next 3-5-7-3-5-5 ch, * skip ch 1, work 1 sc in each of the next 6 ch *, repeat from *-* 5-6-7-9-10-12 more times (= 41-49-57-65-73-85 sc), now work 1 sc in each of the next 97-101-107-113-119-125 sc/ch, * work 1 sc in each of the next ch 6, skip 1 ch *, repeat from *-* 5-6-7-9-10-12 more times, work 1 sc in each of the last 5-7-9-5-7-7 ch (= 41-49-57-65-73-85 sc) = 179-199-221-243-265-295 sc on row.
ROW 3: Work 1 dc in each of the first 5 sc, * work ch 1, skip 1 sc, 1 dc in next sc *, repeat from *-* until 4 sc remain, work 1 dc in each of the last 4 sc.
ROW 4: Work 1 sc in every dc and around every ch.
Repeat 3rd and 4th row 2-2-2-3-3-3 more times.

Then work as follows:
Work 1 sc in each of the first 5-8-5-6-6-6 sc, * work 1 sc in each of the next 2 sc, work ch 3, work 1 sl st in last sc worked (= picot), 1 sc in next sc *, repeat from *-* until 6-8-6-6-7-7 sc remain, work 1 sc in each of the last 6-8-6-6-7-7 sc. Fasten off.

EDGE:
Now work an edge, beg from marker. NOTE: Skip the ch sts not worked.
Work as follows from RS:
Work 1 sc in each of the first ch 5, * work 1 sc in next ch, ch 3, 1 sl st in last sc worked (= picot), work 1 sc in each of the next 4 ch *, repeat from *-* until 1-4-2-0-3-0 ch remain before bra cup, work 1 sc in each of the next 1-4-2-0-3-0 ch and 1 sc in corner in transition for bra cup. Then work * 1 sc around first ch-space on bra cup, ch 3, 1 sc around same ch-space, work 1 sc in next sc *, repeat from *-* up to strap on bra cup. Now work in sl st row:* 1 sc in each of the first 3 sl sts, ch 3, 1 sl st in last sc worked *, repeat from *-* 3-3-4-4-5-5 more times, work 1 sc in each of the next 2 sc, 1 sl st in next sl st. Now do not work up along the strap but turn and work down towards bra cup again: Work 1 sl st through 1 ch on the back of strap and continue with edge the same way but reversed in ch-row on strap, then along opposite side of bra cup, work 1 sc in ch between the 2 bra cups. Continue with edge the same way as on first bra cup and strap and then along the remaining ch cast on. Fasten off.

ASSEMBLY:
Sew a tunnel for the ties in each side of top as follows: Fold the 1st dc/sc inwards on WS so that it meets the 5th dc/sc and sew neatly tog through both layers. Place ties in a cross on the back and thread ends of tie through tunnel - see A.1.
----------------------------------------------------------

BIKINI PANTIES:

CROCHET INFO:
Replace first dc at beg of every dc row with 3 ch.
Replace first sc at beg of every sc row with 1 ch.

DEC ON SC-ROW:
Dec 1 sc in each side on a row as follows:
Work 1 sc, * insert hook in next st, get thread *, repeat from *-*, make a YO and pull yarn through all 3 loops on hook. Then work 1 sc in every st until 3 sts remain on row, repeat dec in the next 2 sts, 1 sc in last st.

INCREASE TIP:
Inc 1 sc in each side on a row as follows:
Work 2 sc in first sc, work 1 st in every sc until 1 sc remains, work 2 sc in last sc.
----------------------------------------------------------

BIKINI PANTIES:
Work bikini panties in sc with an edge on front and back piece and ties in the sides. Start at top of front piece and work in one until back piece.

Work 80-90-95-105-110-120 ch on hook size 2.5 mm/C/2 with Safran. Turn and work 1 sc in 2nd ch from hook (= 2 sc) - READ CROCHET INFO, then work 1 sc in each of the next ch 3, * skip ch 1, 1 sc in each of the next 4 ch *, repeat from *-* 14-17-18-20-21-23 more times = 65-73-77-85-89-97 sc. Then work 1 sc in every sc, and on next row dec 1 sc in each side as follows - READ DECREASE TIP: Dec every 3rd row 13-13-14-14-16-16 times, every other row 6-9-9-10-10-13 times, every row 2-2-2-4-3-3 times and on every other row 2 times in all sizes = 19-21-23-25-27-29 sc. Piece measures 16-18-19-20-21-23 cm / 6 1/4"-7"-7½"-8"-8 1/4"-8 3/4". REMEMBER THE CROCHET GAUGE! Continue with 1 sc in every sc until piece measures 21-23-25-26-28-30 cm / 8 1/4"-9"-9 3/4"-10 1/4"-11"-11 3/4". On next row inc 1 st in each side as follows: Inc every other row 2 times in all sizes, every row 0-2-3-5-8-13 times and every other row 31-32-32-31-31-29 times = 85-93-97-101-109-117 sc. Continue with 1 sc in every sc until piece measures 44-46-48-50-52-55 cm / 17 1/4"-18"-19"-19 3/4"-20½"-21½". Cut the yarn. Now work an edge and ties as follows:

EDGE AND TIES:
Work an edge on back piece as follows:
ROW 1 (= RS): Work 1 dc in first sc, * work ch 1, skip 1 sc, 1 dc in next sc *, repeat from *-* the rest of row. Cut the yarn.
ROW 2: Work loose ch for approx. 29-30-31-32-33-34 cm / 11 3/8''-11¾''-12¼''-12½''-13''-13 3/8'', then continue over edge at the back as follows: * 1 sc in first/next dc, ch 3, skip 1 dc, work 1 sc in next dc *, repeat from *-* the rest of row, then work ch for 29-30-31-32-33-34 cm / 11 3/8''-11¾''-12¼''-12½''-13''-13 3/8''.
ROW 3: Turn piece and work 1 sl st in every ch on tie (make sure to avoid tight sl sts), then continue over edge at the back as follows: Work 1 sc in first sc, * 2 sc around ch-space, ch 3, 1 sl st in last sc worked, 1 sc around same ch-space, 1 sc in next sc *, repeat from *-* the entire row, and continue with 1 sl st in every ch worked for tie in the side. Fasten off.

Work an edge on front piece as follows:
Work 1 sc in every sc. NOTE: Skip the ch sts not worked = 65-73-77-85-89-97 sc. Then work an edge and ties as on back piece.

Diagram

All measurements in charts are in cm.

diagram measurements
diagram measurements
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 170-15

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (58)

country flag PILAR BIZARRO wrote:

Por favor me podrían enviar el patrón de este Bikini

13.05.2018 - 23:34

DROPS Design answered:

Hola Pilar. Puedes descargar gratis el patrón desde la pagina: https://www.garnstudio.com/pattern.php?id=7422&cid=23. Pincha el icono de impresora para imprimir el patrón.

27.05.2018 - 21:44

country flag Susi Crochet wrote:

Hallo liebes Drops Team \r\nIch bin ja auch den Bikini am häkeln mit der safran wolle. Da her meine Frage ist.ob ich auch mit der Wolle safran auch in Wasser damit kann wenn der Bikini vertig ist.\r\nLG\r\nSusi Crochet

13.05.2018 - 21:03

DROPS Design answered:

Liebe Susi Crochet, am besten tragen Sie den Bikini nicht zum baden. Viel Spaß beim häkeln!

14.05.2018 - 11:40

country flag Virginie wrote:

Quand vous dites pour le bas du bikini qu’il faut diminuer 1ms de chaque coté ainsi 14 fois tous les 3 rangs. Cela veut dire que le premier rang on diminue 14 fois d’un coté et 14 fois de l’autre et les deux rangs suivants on ne diminue rien? Vos explications ne sont pas claires et je ne comprends pas. Merci pour votre réponse.

12.05.2018 - 23:44

DROPS Design answered:

Bonjour Virginie, vous crochetez *1 rang en diminuant 1 ms de chaque côté, 2 rangs sans diminuer*, répétez de *à* 13 fois au total, crochetez 1 rang en diminuant 1 ms de chaque côté (= vous avez diminué 14 fois tous les 3 rangs). Crochetez ensuite 1 rang sans diminuer, et diminuez 1 ms de chaque côté au rang suivant, répétez ces 2 rangs 10 fois au total = vous avez diminué 10 fois 1 ms de chaque côté tous les 2 rangs. Au rang suivant, diminuez 1 ms de chaque côté et répétez ce rang un total de 4-3 fois (cf taille) puis diminuez encore 2 fois tous les 2 rangs (= 1 rang sans diminuer, 1 rang avec diminutions) x 2. Bon crochet!

14.05.2018 - 10:23

country flag Dewaet wrote:

Gehaakte bikini tahiti Kan ik uitleg krijgen over he broekje van de bikini , ik snap het ik heb 105 lossen opgezet en dan begrijp ik het niet hoeveel steken moeten er geminderd worden en hoeveel steken blijven er over alvorens ik moet meerderen voor achterpand . Vriendelijke groeten Monica Dewaet

28.04.2018 - 14:39

DROPS Design answered:

Hallo Dewaet, Na het haken van de ketting van 105 lossen haak je de eerste toer volgens instructie: (sla 1 l over, 1 v in elke van de volgende 4 l etc). Dan heb je 85 vasten op de toer. Op de volgende toer haak je 1 vaste in elke vaste (= 85 vasten). Vanaf de toer daarna minder je aan elke kant 1 vaste volgens instructie (lees hiervoor de tip voor het minderen op de vastentoer in de beschrijving vlak onder 'BIKINIBROEKJE')

28.04.2018 - 17:54

Marie M. N. wrote:

Hi! I was wondering if there should be more than 7 repeats when going back on the first string in row 2 (in the part where you crochet the two bra cups together). I am doing a large.

15.04.2018 - 16:42

DROPS Design answered:

Dear Marie M.N., in size L you will repeat from *-* a total of 8 times (= 7 more times), and you should have 57 sts in this "section". Happy crocheting!

16.04.2018 - 09:41

country flag Mina Dahle wrote:

Hei! jeg vil gjerne lage denne, men lurer på om dere vet ca Cup størrelse? Jeg er S rundt, men har en DD cup. noen tips til hvordan jeg kan gjøre det slik at den passer hele veien? :D Takk

08.02.2018 - 19:00

DROPS Design answered:

Hei Mina. Ta en titt på målene på målskissen, hekle cupene i den str som passer deg og når du skal hekle de 2 brystcupene sammen til en overdel (RAD 1) velger du den størrelsen som passer deg rundt. God Fornøyelse!

09.02.2018 - 09:34

country flag Helene wrote:

Hej Jag är inte så van att virka men vill göra bikinitoppen, har något diagram istället för text där man lättare ser hur man ska göra? eller närbild på toppen? DROPS / 170 / 15 Tahiti by DROPS Design från: 76kr Virkad DROPS bikini i ”Safran” med hålmönster och knytning. Stl S- XXXL.

27.04.2017 - 08:30

DROPS Design answered:

Hei Helene. På denne oppskriften har vi kun en beskrivende tekst, ingen diagram. Om du klikker på bildet, vil du få et større bilde. God Fornøyelse!

27.04.2017 - 11:46

country flag Virginia Killough wrote:

There are two version of directions for the bikini panties on your web site. One is made in sc and one is made in dc. Which is right? I first made it in sc then rechecked the pattern online and it said dc. So I ripped it out and did it in dc, now it looks too big, doesn't match the gauge. The top went very well, but I'm lost with the bottoms. help!

15.10.2016 - 22:18

DROPS Design answered:

Dear Mrs Killough, remember that crochet terms are different in UK-English and US-English - make sure you are reading the correct page matching your language selecting language under picture. Happy crocheting!

17.10.2016 - 09:45

country flag Fyrir wrote:

Sehr schönes Stück und gute Anleitung. Es wäre allerdings schön gewesen ein paar Bilder zu haben die vorallem das Oberteil während der einzelnen Herstellungsschritte zeigen.

18.08.2016 - 22:48

country flag Fyrir wrote:

Sehr schönes Stück und gute Anleitung. Es wäre allerdings schön gewesen ein paar Bilder zu haben die vorallem das Oberteil während der einzelnen Herstellungsschritte zeigen.

18.08.2016 - 14:41