DROPS / 167 / 7

Country Girl by DROPS Design

Crochet DROPS hat with fan pattern in ”Muskat”.

DROPS design: Pattern no r-696
Yarn group B
----------------------------------------------------------
Size: S/M – L/XL
Head circumference: 54/56 - 58/60 cm
Materials:
DROPS MUSKAT from Garnstudio
150-200 g colour no 18, white

DROPS CROCHET HOOK SIZE 3 mm – or size needed to get 22 tr x 11 rows = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

100% Cotton
from 2.15 € /50g
DROPS Muskat uni colour DROPS Muskat uni colour 2.15 € /50g
Winnie’s Craft Café
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 6.45€. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
PATTERN:
See diagrams A.1 and A.2. Diagram A.2 shows how round beg and ends.

CROCHET INFO:
Replace first tr at beg of every round beg with tr with 3 ch. Finish round with 1 sl st in 3rd ch at beg of round.
Replace first dc at beg of every dc round with 1 ch. Finish round with 1 sl st in first ch at beg of round.

DECREASE TIP:
Dec 1 tr by working the next 2 tr tog as follows: Work 1 tr but wait with last pull through (= 2 sts on hook), then work next tr but on last pull through, pull yarn through all 3 sts on hook.

INCREASE TIP:
Inc 1 tr by working 2 tr in same tr.
----------------------------------------------------------

HAT:
The piece is worked top down. Work 5 ch on hook size 3 mm with Muskat and form a ring with 1 sl st in first ch.
ROUND 1: Work 11 tr in ring – read CROCHET INFO.
ROUND 2: Work 2 tr in every tr = 22 tr.
ROUND 3: Work * 2 tr in first/next tr, 1 tr in next tr *, repeat from *-* the entire round = 33 tr.
ROUND 4: Work * 2 tr in first/next tr, 1 tr in each of the next 2 tr *, repeat from *-* the entire round = 44 tr. REMEMBER THE CROCHET TENSION!
ROUND 5: Work * 2 tr in first/next tr, 1 tr in each of the next 3 tr *, repeat from *-* the entire round = 55 tr.
ROUND 6: Work * 2 tr in first/next tr, 1 tr in each of the next 4 tr *, repeat from *-* the entire round = 66 tr.
ROUND 7: Work * 2 tr in first/next tr, 1 tr in each of the next 5 tr *, repeat from *-* the entire round = 77 tr.
ROUND 8: Work * 2 tr in first/next tr, 1 tr in each of the next 6 tr *, repeat from *-* the entire round = 88 tr.
ROUND 9: Work * 2 tr in first/next tr, 1 tr in each of the next 7 tr *, repeat from *-* the entire round = 99 tr. Now work differently in the different sizes.

SIZE S/M:
ROUND 10: Work * 2 tr in first/next tr, 1 tr in each of the next 10 tr *, repeat from *-* the entire round = 108 tr.
Then work 1 tr in every tr until piece measures 16 cm.
Work next round as follows: Work 1 tr in every tr AT THE SAME TIME dec 3 tr evenly READ DECREASE TIP = 105 tr. Work brim.

SIZE L/XL:
ROUND 10: Work * 2 tr in first/next tr, 1 tr in each of the next 8 tr *, repeat from *-* the entire round = 110 tr.
ROUND 11: Work 1 tr in each of the first 2 tr, * 2 tr in next tr, 1 tr in each of the next 17 tr *, repeat from *-* the entire round = 116 tr.
Then work 1 tr in every tr until piece measures 17 cm.
Work next round as follows: Work 1 tr in every tr AT THE SAME TIME dec 4 tr evenly READ DECREASE TIP = 112 tr. Work brim.

BRIM:
Now work A.1 as follows (repeat A.1 15-16 times in total on round):
ROUND 1: A.2 shows how round beg and ends - remember CROCHET INFO. Work * 2 ch, skip the first/next 3 tr, in next tr work 1 dtr + 2 ch + 1 tr + 2 ch + 1 dtr, 1 ch, skip 3 tr *, repeat from *-* the entire round, finish round with 1 sl st in first ch = 15-16 tr/dtr-groups and 16-17 ch-spaces.
ROUND 2: Work * 1 dc around first/next ch-space, 3 tr around next ch-space, 1 tr in next tr, 3 tr around next ch-space *, repeat from *-* the entire round = 15-16 tr-groups and 15-16 dc.
ROUND 3: Work 1 tr + 2 ch + 1 tr in first dc, skip 2 tr, 1 dc in each of the next 3 tr, skip 2 tr, * in next dc work 1 tr + 2 ch + 1 tr + 2 ch + 1 tr, skip 2 tr, 1 dc in each of the next 3 tr, skip 2 tr *, repeat from *-* the entire round, finish with 1 tr in first dc at beg of 2nd round + 2 ch = 15-16 tr-groups and 45-48 dc.
ROUND 4: Work * 1 tr in first/next tr, 4 tr around first/next ch-space, skip 1 tr + 1 dc, 1 dc in next dc, skip 1 dc + 1 tr, 4 tr around next ch-space *, repeat from *-* the entire round = 15-16 tr-groups and 15-16 dc.
ROUND 5: Work * 1 dc in each of the first/next 3 tr, skip 2 tr, in next dc work 1 tr + 2 ch + 1 tr + 2 ch + 1 tr, skip 2 tr, 1 dc in each of the next 2 tr *, repeat from *-* the entire round = 15-16 tr-groups and 75-80 dc.
ROUND 6: Work * 1 dc in each of the first/next 2 dc, 5 tr around first/next ch-space, 1 tr in next tr, 5 tr around next ch-space, skip 1 dc, 1 dc in next dc *, repeat from *-* the entire round = 15-16 tr-groups and 45-48 dc.
ROUND 7: Work 1 tr + 3 ch + 1 tr in first dc, skip 1 dc + 2 tr, 1 dc in each of the next 7 tr, skip 2 tr + 1 dc, * in next dc work 1 tr + 3 ch + 1 tr + 3 ch + 1 tr, skip 2 tr + 1 dc, 1 dc in each of the next 7 tr, skip 1 dc + 2 tr *, repeat from *-* the entire round, finish round with 1 tr in first dc at beg of 6th round + 3 ch = 15-16 tr-groups and 105-112 dc.
ROUND 8: Work * 1 tr in first/next tr, 6 tr around first/next ch-space, skip 2 dc, 1 dc in each of the next 3 dc, skip 2 dc, 6 tr around next ch-space *, repeat from *-* the entire round = 15-16 tr-groups and 45-48 dc.
ROUND 9: Work * 1 dc in each of the first/next 5 tr, skip 2 tr + 1 dc, in next dc work 1 tr + 3 ch + 1 tr + 3 ch + 1 tr, skip 1 dc + 2 tr, 1 dc in each of the next 4 tr *, repeat from *-* the entire round = 15-16 tr-groups and 135-144 dc. Fasten off.

Diagram

= ch
= dc in st
= dc around ch-space
= tr in st
= tr around ch-space
= dtr in tr
= tr worked in next dc (= i.e. in same dc as the next 2 tr)
= finish round with 1 sl st in first ch
= replace first dc at beg of round with 1 ch Finish round with 1 sl st in first ch
= replace first tr at beg of round with 3 ch Finish round with 1 sl st in 3rd ch
= last round before brim, round has already been worked

Eb 23.07.2019 - 09:49:

Bonjour! Je suis désolée mais même après avoir parcouru toutes les questions-réponses, je n'arrive toujours pas à interpréter le passage de A1 à A2, et surtout lire A2. Après le cercle du début, 1bride 1 augmentation (A1), puis une coulée 3 en l'air et...une bride...dans la m.coulée? Puis une bride pour finir A2 et on reprend A1? Désolée, je ne comprends pas et pourtant je ne suis pas debutante...Merci bcp de votre aide! EB.

DROPS Design 06.08.2019 kl. 09:43:

Bonjour Eb, A.2 montre simplement comment crocheter le début et la fin des tours, soit par ex au 1er tour, on crochète simplement A.1 et à la fin du 1er tour, on crochète 1 mc dans la ml (= A.2), au 2ème tour, on crochète 1 ml (= A.2), on répète A.1 et on termine par A.2 = 1 mc dans la 1ère ml. Et ainsi de suite. Vous trouverez ici plus d'informations sur les diagrammes. Bon crochet!

Eb 18.07.2019 - 16:23:

Bjr! J'ai réalisé plusieurs chapeaux dans ce genre et malheureusement aucun n'a le rendu des photos malgré le respect des fils. J'ai peur de ne pas réussir à avoir le côté ondulé de celui-ci non plus... Y aurait-il une raison pour laquelle je n'arrive pas à avoir le rendu des photos de vos chapeaux ? Merci de votre aide. Cordialement, Eb.

DROPS Design 19.07.2019 kl. 07:27:

Bonjour Eb, avez-vous également la bonne tension? pour ce modèle, on doit avoir 22 brides x 11 rangs = 10 x 10 cm, si vous crochetez plus souplement,vous n'aurez pas le même résultat, il faut adapter la taille du crochet si besoin. Vous pouvez également amidonner légèrement le chapeau à la fin. Votre magasin DROPS saura vous assister si besoin, même par mail ou téléphone. Bon crochet!

Camilla Von Sparr 23.06.2019 - 14:19:

Jag har upptäckt mitt tankefel och nu blir det rätt! 👍

Camilla Von Sparr 23.06.2019 - 11:11:

Hejsan. Jag undrar om det inte är fel i början på mönstret. På första varvet ska man ha 12 stolpar runt ringen, nästa varv två stolpar i varje stolpe vilket skulle bli 24 stolpar. I mönstret står det att man har 22 stolpar efter varv 2! Är det jag som tänker fel eller? Har räknat och dragit upp men får det inte att stämma. Sedan får jag fel antal stolpar hela vägen! Hälsningar Camilla

DROPS Design 24.06.2019 kl. 08:50:

Så bra att det löste sig! Lycka till vidare.

Connie Madsen 16.06.2019 - 18:55:

Jeg har et problem med målet. Jeg hækler s/m modellen. De 16 cm er det hele cirklen eller fra midten og ud inden jeg skal tage ind til skygge ? vh Connie Madsen

Gemmy Winnen 16.06.2019 - 02:07:

Ik kom steeds veel te groot uit bij de rand, volg het patroon, en bij de rand aangekomen zit ik al ver over de aangegeven 17 cm. Zijn dit wel de juiste steken? Ik haak met 3 mm haaknaald. Of moeten het halve stokjes zijn of zo? Al 4 keer alles uitgehaald, maar het klopt gewoon niet. Vriendelijke groet...

DROPS Design 17.06.2019 kl. 14:30:

Dag Gemmy,

Dat is inderdaad vervelend. Heb je de stekenverhouding gecontroleerd en heb je een proeflapje gehaakt? Misschien is het nodig dat je een kleinere haaknaald gebruikt.

Connie Madsen 02.06.2019 - 20:40:

Jeg ved ikke hvad st står for i opskriften, har søgt på det uden held. Håber i kan fortælle mig det. Mvh Connie Madsen

DROPS Design 03.06.2019 kl. 08:04:

Hei Connie. st er forkortelse for stav, lm er kort for luftmaske, km er kort for kjedemaske, fm er kort for fastmaske. God fornøyelse

Sabrina B 11.02.2019 - 19:23:

I honestly had some issues understanding this pattern. I was thinking that perhaps others may have the same issues. I wanted to share. The hook 3.00mm is too big if you're using I love this cotton. The 6 1/4" is from the top down. I'm using a 2.5 mm with I love this cotton and the hat is larger than the written pattern s/m. The yarn is medium 4, 3.5 oz. 180/165 yd/meter. I'm going to begin again using the same yarn, smaller hook.

DROPS Design 12.02.2019 kl. 09:44:

Dear Sabrina, this hat is worked with DROPS Muskat, which is approx. 109 yds/1.8 oz/50 g - see shadecard here, ie somewhat thicker than the yarn you are using. you'll find here the DROPS stores shipping in USA. Happy crocheting!

DURIEZ Sylviane 20.08.2018 - 18:03:

Bonjour, Je suis arrivée à la 1ere rangée de la bordure. Dans le diagramme, il est indiqué 2ml, 1 DB, 2 ml,1 B, 2ml, 1DB. Dans la vidéo on nous démontre 3 DB, ensuite si je comprends bien il faut continuer 6 B plus loin. Merci pour votre réponse.

DROPS Design 20.08.2018 kl. 21:40:

Bonsoir Mme Duriez, c'est une erreur dans la vidéo, vous devez avoir, comme dans le diagramme et les explications: 1 DB, 2 ml, 1B, 2 ml, 1 DB. Merci. Bon crochet!

Shirley Griffin 26.07.2018 - 12:43:

What do you use to keep the brim from being too floppy?

DROPS Design 26.07.2018 kl. 13:50:

Dear Mrs Griffin, make sure that your tension is matching the pattern, ie 22 sts = 10 cm in width - should the brim be somewhat floppy you can use some starch to make it "harder". Happy crocheting!

Post a comment to pattern DROPS 167-7

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.