Inger Ekblad wrote:
Det har löst sig. Tänkte fel. Tack.
18.02.2019 - 15:52Inger Ekblad wrote:
Hej, Undrar om det stämmer med 130 hst på brättet varv 5?
18.02.2019 - 15:28Inger Ekblad wrote:
Ska börja virka brättet. Läste någonstans att man bara ska ta ena tråden i maskan. Stämmer detta eller?
03.02.2019 - 16:07DROPS Design answered:
Hej Inger, Det hittar inte jag i mönstret, var står det?
08.02.2019 - 15:45Inger Ekblad wrote:
Hur mäter jag virkfastheten när jag virkar runt som t ex en hatt? Mvh
20.01.2019 - 14:16DROPS Design answered:
Hej Inger, du kan göra ett litet rakt virkprov först, så du ser att din virkfasthet stämmer. Lycka till :)
24.01.2019 - 14:43Joanne wrote:
So...I finished the hat. Did you use something to stiffen the brim as I used the yarn that was recommended and it is quite floppy. The brim would definitely not stay up on its own.
09.08.2018 - 19:34DROPS Design answered:
Dear Joanne, yes you can starch the brim. Enjoy!
10.08.2018 - 08:04Joanne wrote:
I can’t figure out what I’m doing wrong. The shape doesn’t look right but maybe I have to go further. I finished row 17 and I’ve done a couple rows past that. I’m at 5-1/2 inches from the top of the hat. I have 90 stitches as per the pattern. I reduced my hook size because of my gauge and I have 18 sc = 4” but the shape of the hat doesn’t look right...I’d love some help. Can I give out my email address?
13.07.2018 - 16:56DROPS Design answered:
Dear Joanne, it's a bit difficult to help you there and finding what went wrong, please bring your work to your store (or send them a picture per mail) so that they can have a look and check together with you. Happy crocheting!
16.07.2018 - 09:46Amy wrote:
Just a tip: I had a much easier time working with the actual pattern than the written instructions for the brim.
12.07.2018 - 18:59Joanne wrote:
So, the first round is 11hdc. Would you replace the first hdc here with two chains? If I do that than I really only have 10hdc.
09.07.2018 - 14:27DROPS Design answered:
Dear Johanne, on first round you start with 2 chains and crochet 10 hdc = 11 hdc. Happy crocheting!
09.07.2018 - 15:42Joanne wrote:
Each hdc row starts with 2hdc in the first sc. In the crochet info it says to replace first hdc with 2 ch. Since the row starts with 2hdc are you saying that 1 of the 2 hdc should be replaced with 2 ch or are you saying that each hdc row should simply be started with 2 ch and then 2 hdc in the next sc?
09.07.2018 - 12:14DROPS Design answered:
Dear Joanne, at the beg of each round where you crochet 2 hdc, work 2 ch (= replace 1st hdc) and 1 hdc in the same st, at the end of round, crochet 1 sl st in the 2nd ch from beg of round. Happy crocheting!
09.07.2018 - 12:52
My Girl |
||||||||||||||||||||||
|
|
|||||||||||||||||||||
Crochet DROPS hat with lace pattern in "Bomull-Lin" or "Paris".
DROPS 167-8 |
||||||||||||||||||||||
PATTERN: See diagram A.1. Work diagram 5 times in total on round. CROCHET INFO: Replace first hdc at beg of every hdc round with 2 ch. Finish round with 1 sl st in 2nd ch at beg of round. Replace first sc at beg of every sc round with 1 ch. Finish round with 1 sl st in 1st ch at beg of round. ---------------------------------------------------------- HAT: The piece is worked top down. Crochet 5 ch on hook size 3.5 mm/E/4 with beige/dark beige and form a ring with 1 sl st in first ch. ROUND 1: Work 11 hdc in ch-ring – READ CROCHET INFO! ROUND 2 (and then on every even numbered round): Work 1 sc in every hdc. ROUND 3: Work 2 hdc in every sc = 22 hdc. ROUND 5: Work * 2 hdc in first/next sc, 1 hdc in next sc *, repeat from *-* the entire round = 33 hdc. ROUND 7: Work * 2 hdc in first/next sc, 1 hdc in each of the next 2 sc *, repeat from *-* the entire round = 44 hdc. REMEMBER THE CROCHET GAUGE! ROUND 9: Work * 2 hdc in first/next sc, 1 hdc in each of the next 3 sc *, repeat from *-* the entire round = 55 hdc. ROUND 11: Work * 2 hdc in first/next sc, 1 hdc in each of the next 4 sc *, repeat from *-* the entire round = 66 hdc. ROUND 13: Work * 2 hdc in first/next sc, 1 hdc in each of the next 5 sc *, repeat from *-* the entire round = 77 hdc. ROUND 15: Work * 2 hdc in first/next sc, 1 hdc in each of the next 6 sc *, repeat from *-* the entire round = 88 hdc. ROUND 17: Work * 2 hdc in first/next sc, 1 hdc in each of the next 43 sc *, repeat from *-* the entire round = 90 hdc. Continue every other round with 1 sc in every hdc and 1 hdc in every sc. Continue like this until piece measures approx. 17 cm / 6 3/4'' from the top, adjust so that last round is with sc. Work brim. BRIM: Now work A.1 as follows (repeat A.1 5 times in total on round): ROUND 1: Remember CROCHET INFO! Work ch 2, * ch 2, skip 2 sc, 1 hdc in each of the next 5 sc, 2 hdc in each of the next 2 sc, 1 hdc in each of the next 5 sc, ch 2, skip 2 sc, 2 hdc in each of the next 2 sc*, repeat from *-* the entire round, finish round with 1 sl st in 2nd ch at beg of round = 90 hdc and 10 ch-spaces. ROUND 2: Work * 3 sc around first/next ch-space, skip 1 hdc, 1 sc in each of the next 13 hdc, 3 sc around next ch-space, 1 sc in each of the next 3 hdc *, repeat from *-* the entire round = 110 sc. ROUND 3: Work * 1 hdc in each of the first/next 3 sc, ch 2, skip 2 sc, 1 hdc in each of the next 4 sc, 2 hdc in each of the next 2 sc, 1 hdc in each of the next 4 sc, ch 2, skip 2 sc, 1 hdc in each of the next 3 sc, 2 hdc in each of the next 2 sc *, repeat from *-* the entire round = 110 hdc and 10 ch-spaces. ROUND 4: Work * 1 sc in each of the first/next 3 hdc, 3 sc around next ch-space, skip 1 hdc, 1 sc in each of the next 11 hdc, 3 sc around next ch-space, skip 1 hdc, 1 sc in each of the next 6 hdc *, repeat from *-* the entire round = 130 sc. ROUND 5: Work * 1 hdc in each of the first 6 sc, ch 2, skip 2 sc, 1 hdc in each of the next 3 sc, 2 hdc in each of the next 2 sc, 1 hdc in each of the next 3 sc, ch 2, skip 2 sc, 1 hdc in each of the next 6 sc, 2 hdc in each of the next 2 sc *, repeat from *-* the entire round = 130 hdc and 10 ch-spaces. ROUND 6: Work * 1 sc in each of the first/next 6 hdc, 3 sc around next ch-space, skip 1 hdc, 1 sc in each of the next 9 hdc, 3 sc around next ch-space, skip 1 hdc, 1 sc in each of the next 9 hdc *, repeat from *-* the entire round = 150 sc. ROUND 7: Work * 1 hdc in each of the first/next 9 sc, ch 2, skip 2 sc, 1 hdc in each of the next 2 sc, 2 hdc in next sc, 1 hdc in each of the next 3 sc, ch 2, skip 2 sc, 1 hdc in each of the next 10 sc, 2 hdc in next sc *, repeat from *-* the entire round = 140 hdc and 10 ch-spaces. ROUND 8: Work * 1 sc in each of the first 9 hdc, 3 sc around first/next ch-space, skip 1 hdc, 1 sc in each of the next 6 hdc, 3 sc around next ch-space, skip 1 hdc, 1 sc in each of the next 11 sc *, repeat from *-* the entire round = 160 sc. ROUND 9: Work * 1 hdc in each of the first 12 sc, ch 2, skip 2 sc, 1 hdc in next sc, 2 hdc in next sc, 1 hdc in next sc, ch 2, skip 2 sc, 1 hdc in each of the next 12 sc, 2 hdc in next sc *, repeat from *-* the entire round = 150 hdc and 10 ch-spaces. ROUND 10: Work * 1 sc in each of the first/next 12 hdc, 3 sc around first/next ch-space, skip 1 hdc, 1 sc in each of the next 3 hdc, 3 sc around next ch-space, skip 1 hdc, 1 sc in each of the next 13 hdc *, repeat from *-* the entire round = 170 sc. ROUND 11: Work * 1 hdc in each of the first/next 16 sc, ch 2, skip 2 sc, 1 hdc in each of the next 15 sc, 2 hdc in next sc *, repeat from *-* the entire round = 165 hdc and 5 ch-spaces. ROUND 12: Work * 1 sc in each of the first/next 16 hdc, 3 sc around first/next ch-space, skip 1 hdc, 1 sc in each of the next 16 hdc *, repeat from *-* the entire round = 175 sc. ROUND 13: Work 1 hdc in every sc = 175 hdc. Fasten off. PLAITED STRING: Make a plait with 3 twined strings. Make 1 twined string as follows: Cut 2 lengths brown yarn of 8 metres/8½ yds each. Twine the strands tog until they resist, fold the string double so that it twines again. Make a knot in each end of the string. Make another 2 strings the same way. Make 1 plait of the 3 twined strings. Tie a knot approx. 4 cm / 1½'' from each end. Twirl the plait 2 times around hat and tie a knot. |
||||||||||||||||||||||
Diagram explanations |
||||||||||||||||||||||
|
||||||||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Inger Ekblad wrote:
Vilken sträckningsteknik är bäst till brättet?
05.03.2019 - 12:51