DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 6.75 CAD /50g
Get the yarn to make this pattern from 40.50CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Miss Fox

Set consists of: Knitted DROPS mittens, hat and socks with fox pattern in “Alpaca”. SIZE 0 months - 14 years.

DROPS Extra 0-1217
DROPS design: Pattern no z-039-bn
Yarn group A
----------------------------------------------------------
MITTENS:
Size: 0/6 - 12/24 months (3/5 - 6/9 - 10/14) years
Materials:
DROPS ALPACA from Garnstudio
50 g for all sizes in color no 2925, rust
50 g for all sizes in color no 100, off white
+ some left-over black for eyes and mouth.

DROPS DOUBLE POINTED NEEDLES size 2.5 mm / US 1.5 - or size needed to get 26 sts x 34 rows in stockinette st = 4'' x 4'' (10 x 10 cm).

HAT:
Size: 0/6 - 12/24 months (3/5 - 6/9 - 10/14) years
Materials:
DROPS ALPACA from Garnstudio
50 g color no 2925, rust
50 g color no 100, off white
+ some left-over black for eyes and mouth.

DROPS DOUBLE POINTED NEEDLES OR CIRCULAR NEEDLE (40 cm / 16'') SIZE 3 mm/US 2.5 - or size needed to get 24 sts x 32 rows in stockinette st = 4'' x 4'' (10 x 10 cm).

SOCKS:
Size: (child-child-child) child-child-child (child-child-woman)
US: (1/2-2½/3½-4/5) 5½/6½-7/8-9/10½ (11/13-13½-5/6½)
EU: (15/17-18/19-20/21) 22/23-24/25-26/28 (29/31-32/34-35/37)

Foot length:
(10-11-12) 13-15-17 (18-20-22) cm / (4"-4½"-4 3/4") 5"-6"-6 3/4" (7"-8"-8 3/4").
Materials:
DROPS ALPACA from Garnstudio
(50-50-50) 50-50-50 (100-100-100) g color no 2925, rust
50 g for all sizes in color no 100, off white
+ some left-over black for eyes and mouth.

DROPS DOUBLE POINTED NEEDLES size 2.5 mm / US 1.5 - or size needed to get 26 sts x 34 rows in stockinette st = 4'' x 4'' (10 x 10 cm).

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Alpaca
DROPS Alpaca
100% Alpaca
from 6.75 CAD /50g
Get the yarn to make this pattern from 40.50CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
INCREASE TIP:
Inc 1 st by making 1 YO. On next round K YO twisted to avoid holes.

PATTERN:
See diagrams A.1 and A.2. Work entire pattern in stockinette st.

DECREASE TIP:
Work until 3 sts remain before marker and K 2 tog, K 2 (marker is in the middle of these 2 sts), slip 1 st as if to K, K 1, psso.

HEEL DECREASE:
Row 1 (= RS): K until (5-5-7) 7-7-7 (7-7-7) sts remain, slip next st as if to K, K 1, psso, turn piece.
Row 2 (= WS): P until (5-5-7) 7-7-7 (7-7-7) sts remain, slip next st as if to P, P 1, psso, turn piece.
Row 3 (= RS): K until (4-4-6) 6-6-6 (6-6-6) sts remain, slip next st as if to K, K 1, psso, turn piece.
Row 4 (= WS): P until (4-4-6) 6-6-6 (6-6-6) sts remain, slip next st as if to P, P 1, psso, turn piece.
Continue dec like this with 1 less st before each dec until (10-10-10) 10-10-10 (14-14-14) sts remain on needle.
--------------------------------------------------------

MITTEN:
Worked in the round on double pointed needles.
Cast on 36-40 (44-52-56) sts on double pointed needle size 2.5 mm / US 1.5 with rust. Work rib = K 2/P 2 for 5-6 (7-8-9) cm / 2"-2½" (2 3/4"-3"-3½"). K 1 round and dec 12-10 (8-10-8) sts evenly = 24-30 (36-42-48) sts. Work in stockinette st for 1 cm / 3/8''. On next round beg inc for thumb gusset and inc 1 st on each side of 2nd st on round – READ INCREASE TIP (= 2 sts inc). Repeat inc on every 3rd round a total of 3-4 (5-6-7) times = 7-9 (11-13-15) thumb sts. When piece measures 8½-10 (11½-13-14½) cm / 3 1/4"-4" (4½"-5"-5 3/4") in total, slip the 7-9 (11-13-15) thumb sts on 1 stitch holder. Cast on 1 new st behind sts on stitch holder = 24-30 (36-42-48) sts on needle. Continue in stockinette st in the round. When piece measures 10-13 (14-15-17) cm / 4"-5" (5½"-6"-6 3/4") in total, work pattern according to diagram A.1 – NOTE: St with arrow in diagram should fit with approx. the middle on top of mitten. After A.1 continue with off white until finished measurements. When piece measures 13-16 (17-19-21) cm / 5"-6 1/4" (6 3/4"-7½"-8 1/4"), insert 1 marker in each side so that there are 12-15 (18-21-24) sts both on top and inside mitten. On next round dec 1 st on each side of both markers – READ DECREASE TIP (= 4 sts dec). Repeat dec every other round 2-2 (1-3-2) times in total and on every round 2-2 (4-4-6) times in total = 8-14 (16-14-16) sts remain on needle. On next round K all sts tog 2 by 2. Cut the yarn and pull it through the remaining sts, tighten tog and fasten. The entire mitten measures approx. 15-18 (19-22-24) cm / 6"-7" (7½"-8 3/4"-9½").

THUMB:
Slip the 7-9 (11-13-15) sts from stitch holder over thumb gusset back on double pointed needles size 2.5 mm / US 1.5, knit in addition up 5 sts in the edge behind the thumb sts = 12-14 (16-18-20) sts. Work stockinette st in the round until thumb measures 2½-3 (3½-4-5) cm / 3/4"-1" (1 1/4"-1½"-2"). Then K all sts tog 2 by 2 = 6-7 (8-9-10) sts. Cut the yarn and pull it through the remaining sts, tighten tog and fasten.

Embroider eyes and mouth on mitten - see picture.
Work another mitten but reversed, i.e. when inc for thumb, inc on each side of next to last st on round (instead of on each side of second st on round).
----------------------------------------------------------

HAT:
Worked in the round on double pointed needles/circular needle.
Cast on 84-96 (104-108-112) sts on double pointed/circular needle size 3 mm / US 2.5 with off white. Work 6 rounds in stockinette st. Then work 6 rounds rib (= K 2/P 2). After rib work pattern in the round according to diagram A.2. On first round in diagram A.2 dec 2 st in 3/5 year and inc 2 st in 10/14 year = 84-96 (102-108-114) sts. When A.2 has been worked 1 time vertically, continue in stockinette st and rust. REMEMBER THE KNITTING GAUGE
When piece measures 17-19 (21-22-23) cm / 6 3/4"-7½" (8 1/4"-8 3/4"-9") loosely bind off all sts.

ASSEMBLY:
Sew seam at the top of hat inside bind-off edge - sew with grafting/kitchener sts. Embroider on eyes, nose and mouth with stitches - see picture for placement.
----------------------------------------------------------

SOCK:
Worked in the round on double pointed needles.
Cast on (44-48-52) 52-56-56 (60-64-64) sts on double pointed needle size 2.5 mm / US 1.5 with rust. Work rib = K 2/P 2 for (8-10-10) 12-14-14 (16-18-18) cm / (3"-4"-4") 4 3/4"-5½"-5½" (6 1/4"-7"-7"). Work next round as follows: K the first (26-30-30) 30-34-34 (34-38-38) sts and dec (8-8-8) 8-10-10 (10-10-10) sts evenly over these sts = (18-22-22) 22-24-24 (24-28-28) sts K, slip these sts on 1 stitch holder (= mid on top of foot). (18-18-22) 22-22-22 (26-26-26) sts remain on needle for heel. Continue rib as before back and forth for (3-3½-4) 4-4½-4½ (5-5-5) cm / (1"-1 1/4"-1½") 1½"-1 3/4"-1 3/4" (2"-2"-2"). Insert 1 marker in the piece. Then work HEEL DECREASE - see explanation above. After heel decrease, pick up (8-9-10) 10-11-12 (13-13-13) sts on each side of heel and slip the (18-22-22) 22-24-24 (24-28-28) sts from the stitch holder back on needle = (44-50-52) 52-56-58 (64-68-68) sts. Insert a marker on each side of the (18-22-22) 22-24-24 (24-28-28) sts on top of foot. Continue in stockinette st in the round over all sts and dec in each side as follows: K the last 2 sts before the (18-22-22) 22-24-24 (24-28-28) sts on top of foot twisted tog and K the first 2 sts after the (18-22-22) 22-24-24 (24-28-28) sts tog. Repeat dec every other round a total of (4-4-5) 5-7-5 (8-7-7) times = (36-42-42) 42-42-48 (48-54-54) sts. Continue to work until piece measures (4-5-5) 6-8-9 (10-12-13) cm / (1½"-2"-2") 2 3/4"-3"-3½" (4"-4 3/4"-5") (approx. (6-6-7) 7-7-8 (8-8-9) cm / (2½"-2½"-2 3/4") 2 3/4"-2 3/4"-3" (3"-3"-3½") remain until finished measurements). Now work pattern in the round according to diagram A.1 - NOTE: St with arrow in diagram should fit approx. mid on top of foot. When diagram A.1 has been worked, continue with off white until finished measurements. Continue to work until piece measures (7-8-9) 9-11-13 (14-16-18) cm / (2 3/4"-3"-3½") 3½"-4½"-5" (5½"-6 1/4"-7") from marker on heel (approx. (3-3-3) 4-4-4 (4-4-4) cm / (1"-1"-1") 1½"-1½"-1½" (1½"-1½"-1½") remain until finished measurements). Now insert 1 marker in each side so that there are (18-21-21) 21-21-24 (24-27-27) sts both on top of foot and under foot. On next round dec 1 st on each side of both markers for toes – READ DECREASE TIP (= 4 sts dec). Repeat dec every other round (5-4-4) 7-6-5 (5-5-5) times in total and then every round a total of (1-3-3) 0-1-4 (4-5-5) times = (12-14-14) 14-14-12 (12-14-14) sts remain on needle. On next round K all sts tog 2 by 2. Cut the yarn and pull it through the remaining sts, tighten tog and fasten.

Embroider on eyes and snout on toe on sock with black - see picture.
Knit another sock the same way.

This pattern has been corrected.

Updated online: 14.02.2020
HAT.... After rib work pattern in the round according to diagram A.2. On first round in diagram A.2 dec 2 st in 3/5 year and inc 2 st in 10/14 year = 84-96 (102-108-114) sts.

Diagram

symbols = off white
symbols = rust
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Michelle gloves & Miss Fox

Marion_Co25, France

Miss Fox

Paulinette, United States

Miss Fox Socks

Alceaaa, France

Miss Fox

Anita, Sweden

0-1217 Miss Fox Mittens

Elly, Bulgaria

Miss Fox Mittens

Margrete, Norway

Miss Fox

Mette, Norway

Post a comment to pattern DROPS Extra 0-1217

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (31)

country flag Nathalie Poulin wrote:

Bonjour, Je suis propriétaire d’une boutique de tricot qui vend vos très belles laines Drops. Je me questionne, car vous faites un patron de bas avec la laine Drops Alpaca qui contient 100% alpaca. Normalement, il faut du nylon pour la résistance…Est-ce que je dois conseiller cette laine quand même? Nathalie Poulin de Créations L’artis-Anna

07.12.2023 - 17:19

DROPS Design answered:

Bonjour Mme Poulin, ce modèle a été créé en DROPS Alpaca, mais naturellement, si vous voulez plus de résistance, vous pourrez le tricoter en DROPS Fabel (Superwash) ou DROPS Nord (mélange alpaga, laine et polyamide). Bon tricot!

08.12.2023 - 08:49

country flag Lara wrote:

Buonasera, cosa si intende per "mettere il segnapunti con 21 maglie sopra e sotto la muffola"? Ai lati? Grazie

20.10.2023 - 18:36

DROPS Design answered:

Buonasera Lara, esatto, ci devono essere 21 maglie per il sopra e 21 maglie per il sotto della muffola. Buon lavoro!

24.10.2023 - 22:36

country flag Lucille Pineault wrote:

Je ne comprends pas quand vous dites aprèsA1, un marqueur de chaque côté! Chaque côté de quoi ? Où? Merci

16.10.2023 - 20:39

DROPS Design answered:

Bonjour Mme Pineault, on va placer 1 marqueur pour délimiter les côtés de la moufle, placez la maille avec la flèche dans A.1 au milieu du dos de la main et comptez ainsi 12-15 (18-21-24) mailles pour le dos de la main et pour la paume, en veillant à ce que la maille indiquée reste bien au milieu du dos de la main. Bon tricot!

17.10.2023 - 09:58

country flag Gina Clegg wrote:

Is there any way possible these mittens could be knitted flat on straight needles? I really cannot get to grips with dpns. 🥴

23.03.2023 - 12:35

DROPS Design answered:

Dear Mrs Clegg, this might be possible, but it might be also easier in the round, what about magic loop, did you try? It might be easier than dpn?

23.03.2023 - 12:48

country flag Rike wrote:

Bitte um Hilfe zu den Fäustlingen: Welche Zahl muss ich denn jetzt wählen, wenn ich für 24 Monate stricken will? 0/6-12/24 Monate (3/5-6/9-10/14) Jahre stimmt doch nicht mit 36-40 (44-52-56) M überein. Zwei Größen fehlen! Welche entspricht denn welcher ? Danke

17.09.2022 - 20:18

DROPS Design answered:

Liebe Frau Rike, diese Fäustlingen sind nur in 5 Größen erhältlich; für 24 Monaten folgen Sie die 2. Größe: 12/24 Monaten. Beachten Sie, daß Ihre Maschenprobe stimmt (26 M x 34 Reihen glattrechts = 10 x 10 cm). Viel Spaß beim stricken!

19.09.2022 - 09:55

country flag Marieluise wrote:

Hallo! Ich kann das Diagramm für das Muster in der Anleitung finden. Wo finde ich das Diagramm?

11.10.2021 - 10:16

DROPS Design answered:

Liebe Marieluise, Manchmal haben wir derzeit Probleme mit der Anzeige der Bilder. Versuchen Sie, die Seite zu aktualisieren und den Browser-Cache zu leeren. Wenn die Fotos erneut auf der Website angezeigt werden, können Sie die Anleitung ausdrucken. Viel Spaß beim Stricken!

11.10.2021 - 11:28

country flag Baert wrote:

Modèle en français

09.10.2021 - 10:47

country flag Kirsti wrote:

Jeg strikker sokker, den minste størrelsen, de blir vakre. Men mønstret må være feil Etter hælfelling og opptak av nye masker, har jeg 44. Så skal jeg felle 4 masker 4 ganger, og det står at jeg skal ha 36 masker igjen. Det går ikke opp...

05.03.2021 - 18:38

country flag Lucelle wrote:

Even een vraagje over patroon van de muts. Hoe krijg ik de oren op de muts gebreid of mis ik iets in het patroon

14.12.2020 - 20:08

DROPS Design answered:

Dag Lucelle,

Er zijn niet speciaal oren op de muts gebreid. Het is een rechthoekig model en op de foto zijn de punten van de muts een beetje in vorm gebracht, zodat het oren lijken.

17.12.2020 - 23:02

country flag Leila wrote:

What does READ INCREASE TIP mean (mitten pattern)? On next round beg inc for thumb gusset and inc 1 st on each side of 2nd st on round – READ INCREASE TIP (= 2 sts inc)."

11.12.2020 - 00:56

DROPS Design answered:

Hi Leila, This refers to the description of how to increase, which is found at the beginning of the pattern. Happy knitting!

11.12.2020 - 06:58