DROPS Air
DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g
Get the yarn to make this pattern from 38.70$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Lakeside

Crochet DROPS jumper with double crochet, lace pattern and round yoke, worked top down in ”Air”.

DROPS 164-31
DROPS design: Pattern no ai-010
Yarn group C or A + A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL

Materials:
DROPS AIR from Garnstudio
300-350-400-450-450-500 g color no 11, peacock blue

DROPS Hook size 6 mm / J/10 - or size needed to get 12 dc x 7 rows = 4'' x 4'' (10 x 10 cm), or 1 repetition of A.2 = width 8 cm / 3 1/8''.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Air
DROPS Air
65% Alpaca, 28% Polyamide, 7% Wool
from 6.45 $ /50g
Get the yarn to make this pattern from 38.70$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
CROCHET INFO:
Replace first sc at beg of every sc round with 1 ch. Finish every round with 1 sl st in ch from beg of round.
Replace first dc at beg of every dc round with 3 ch. Finish round with 1 sl st in 3rd ch at beg of round.

PATTERN:
See diagrams A.1 and A.2.

CROCHET 2 DC TOG (in dc):
Work 1 dc in next dc but wait with last pull through, work 1 dc more in same dc, but on last pull through, pull through all sts on hook.

CROCHET 2 DC TOG (around ch):
Work 1 dc around the middle ch in dc-group but wait with last pull through, work 1 dc more around same ch, but on last pull through, pull through all sts on hook.

DC-GROUP:
Work a dc-group around ch-space as follows: Work * 1 dc, 1 ch *, repeat from *-* 2 more times around same ch-space, 1 dc around same ch-space.

INCREASE TIP:
Inc 1 dc by working 2 dc in 1 sc/dc.

DECREASE TIP:
Dec 1 dc at beg and end of round as follows: Work 1 dc (= 3 ch), * work 1 dc but wait with last pull through (= 2 sts on hook), then work next dc but on last pull through, pull yarn through all sts on hook *, repeat from *-* when 3 dc remain on round = 1 st dec on each side of marker.
----------------------------------------------------------

JUMPER:
The piece is worked top down. Worked in the round, round beg mid back.

YOKE:
Work 66-69-75-82-84-90 loose ch on hook size 6 mm / J/10 with Air and form a ring with 1 sl st. Work first round as follows:
ROUND 1: Work 1 ch - READ CROCHET INFO, work 1 sc in each of the first 1-4-2-1-3-1 ch, * skip ch 1, work 1 sc in each of the next 7 ch *, repeat from *-* 7-7-8-9-9-10 more times = 58-61-66-72-74-79 sc.
ROUND 2: Work 1 dc in every sc while AT THE SAME TIME inc 6-8-8-9-12-23 dc evenly - READ INCREASE TIP = 64-69-74-81-86-102 dc.
Now insert 8 markers in the piece for raglan inc without working sts. Insert 4 marker in each side from beg of round so that it is reversed from mid front: Insert a marker after 10-10-10-11-12-15 dc, insert next marker after 2 dc, then insert next marker after 8-10-12-14-14-17 dc, and finish with last marker after 2 dc. There are now 20-21-22-23-26-30 dc between the 2 middle markers towards front piece on jumper. Now continue with 1 dc in every dc, AT THE SAME TIME inc 1 dc on right side of each of the 8 markers. Then inc alternately on right and left side of every marker. Repeat inc every round 9-9-11-12-13-16 more times, and every other round 2-3-2-2-2-0 times = 160-173-186-201-214-238 dc on round. Piece measures approx. 20-23-23-24-26-27 cm / 8"-9"-9"-9½"-10 1/4"-10½". REMEMBER THE CROCHET GAUGE! On next round work as follows: Work 21-23-25-28-30-34 dc (= half back piece), 8 ch (under sleeve), skip 38-40-42-45-47-50 dc from previous row (= sleeve), 42-47-52-55-60-70 dc (= front piece), 8 ch (under sleeve), skip 38-40-42-45-47-50 dc from previous row (= sleeve) and 21-23-25-27-30-34 dc (= half back piece). Insert a marker, now measure piece from here!

BODY:
There are now 100-109-118-127-136-154 sts for body. NOW MEASURE THE PIECE FROM HERE. Work 1 round with 1 dc in every dc/ch. Then work PATTERN - see explanation above, as follows: NOTE: Work from 1st round in A.1-A.2.
ROUND 1: Work 3 ch (= A.1) - remember crochet info. Then work A.2 as follows: * Work 2 dc TOG (in dc) - see explanation above, ch 5, skip 2 dc, 1 sc in next dc, ch 3, skip 2 dc, 1 sc in next dc, ch 5, skip 2 dc *, repeat from *-* 10-11-12-13-14-16 more times. Finish with 1 sl st in 3rd ch on round (= A.1).
ROUND 2: Work ch 1, * work 1 sc in the 2 dc worked tog, ch 3, skip 1 ch-space, work 1 dc-GROUP - see explanation above, around next ch-space, ch 3, skip 1 ch-space *, repeat from *-* 10-11-12-13-14-16 more times. Finish with 1 sl st in 1st ch on round.
ROUND 3: Work ch 1, * ch 2, 1 sc around next ch-space, ch 5, work 2 dc TOG (around ch-space) - see explanation above, ch 5, 1 sc around next ch after dc-group, 1 ch *, repeat from *-* 10-11-12-13-14-16 more times. Finish with 1 sl st in 1st ch on round.
ROUND 4: Work ch 3, work (1 ch, 1 dc, ch 1, 1 dc) around first ch-space, ch 3, skip 1 ch-space, 1 sc in the 2 dc worked tog, ch 3, skip 1 ch-space, * (1 dc, ch 1, 1 dc, ch 1, 1 dc, ch 1, 1 dc) around next ch-space, ch 3, skip 1 ch-space, 1 sc in the 2 dc worked tog, ch 3, skip 1 ch-space *, repeat from *-* 9-10-11-12-13-15 more times, (1 dc, ch 1, 1 dc) around last ch-space. Finish with 1 sl st in 3rd ch on round.
ROUND 5: Work ch 3, * work 2 dc TOG (around ch), ch 5, work 1 sc around ch-space after dc-group, ch 3, 1 sc around next ch-space, 5 ch *, repeat from *-* 10-11-12-13-14-16 more times. Finish with 1 sl st in 3rd ch on round.
Continue like this and repeat A.X (= 2nd-5th round) until piece measures approx. 32 cm / 12½'' in all sizes - adjust to finish after 2nd or 4th round in A.1-A.2. Piece measures 56-60-60-62-64-66 cm / 22"-23½"-23½"-24½"-25 1/4"-26" in total.

SLEEVE:
Sleeve is worked in the round, top down. NOW MEASURE THE PIECE FROM HERE. Insert a marker in the middle of the 8 ch worked under sleeve. Let marker follow in piece until finished measurements. Fasten yarn with 1 sl st in the 5th ch of the 8 ch worked in armhole on body. Work 3 ch (= 1 dc) continue with 1 dc in each of the next ch 3, 1 dc in each of the dc for sleeve and then 1 dc in the remaining 4 ch under sleeve = 46-48-50-53-55-58 dc - remember CROCHET INFO! Continue with 1 dc in every dc AT THE SAME TIME when piece measures approx. 4 cm / 1½'' beg dec - READ DECREASE TIP. Repeat dec every 3rd-2nd-2nd-2nd-2nd-1st round 8-9-10-10-11-12 more times = 28-28-28-31-31-32 dc remain. When sleeve measures 46-44-44-43-42-40 cm / 18"-17 1/4"-17 1/4"-17"-16½"-15 3/4", sleeve is finished. Work the other sleeve the same way.
----------------------------------------------------------
Hat and neck warmer:
See DROPS 164-32 or "Related patterns" in pattern on website.
----------------------------------------------------------

Diagram

All measurements in charts are in cm.

symbols = 1 dc
symbols = 1 ch
symbols = 1 sc in st
symbols = Work 2 dc tog as follows: Work 1 dc in next dc but wait with last pull through, work 1 dc more in same dc, but on last pull through, pull through all YOs on hook.
symbols = Work 2 dc tog as follows:
Work 1 dc around the middle ch in dc-group but wait with last pull through, work 1 dc more around same ch, but on last pull through, pull through all YOs on hook.
symbols = Work a dc-group around ch-space as follows: Work * 1 dc, 1 ch *, repeat from *-* 2 more times around same ch-space, 1 dc around same ch-space.
symbols = 1 sc around ch-space
symbols = 1 dc around ch-space
symbols = 1 sl st
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 164-31

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (41)

country flag Pia Svane Christensen wrote:

Hej Jeg forstår ikke hvad det er jeg skal gøre i bærestykket, skal jeg tage dobbelt ud i hveranden omgang. ? Med venlig hilsen Pia Nu tages der ud på skiftevis højre og venstre side af hver mærke. Gentag udtagningen på hver omg 9-9-11-12-13-16 gange til, og på hver 2.omg 2-3-2-2-2-0 gange = 160-173-186-201-214-238 st på omg.

29.08.2022 - 21:07

DROPS Design answered:

Hej Pia, først tager du ud på hver omgang 9 gange og efter det tager du ud på hver 2.omgang 2 gange (i den mindste størrelse) :)

31.08.2022 - 13:45

country flag Melanie wrote:

Hallo, Größe XXXL, 16 mal in Jeder Runde 8 Zun. erste Runde rechts, nächste Runde links, verstanden. Hier habe ich dann nach 16 Runden 230 Maschen. "dann in jeder 2. Rd 0 x arb = 238" Aber 0 Zunamen heißt ich habe nur 230 Maschen oder Runde 17. 8Znm und danach ohne Zunahmen weiter? Und nein mir helfen weder alle anderen Kommentare noch ein Video.

13.05.2022 - 09:06

DROPS Design answered:

Liebe Melanie, die Zunahmen wiederholen Sie noch weitere 16 x, dh insgesamt 17 Mal (die 1. Zunahmen + noch 16 Mal), so haben Sie die 238 Maschen. Viel Spaß beim häkeln!

13.05.2022 - 09:14

country flag Marianne wrote:

Klopt het dat er na het plaatsen van de 8 markeerders bij maat xl,tussen de middelste twee markeerders 23 st zijn aan de voorkant en tussen de middelste twee markeerders aan de achterkant 20 st zijn

11.01.2022 - 15:34

DROPS Design answered:

Dag Marianne,

Op het achterpand zijn er 22 steken en op het voorpand zijn er 23 steken.

12.01.2022 - 09:42

country flag Marianne wrote:

Klopt het dat er na het plaatsen van de 8 markeerders bij maat xl,tussen de middelste twee markeerders 23 st zijn aan de voorkant en tussen de middelste twee markeerders aan de achterkant 20 st zijn

11.01.2022 - 15:32

country flag Flamarion wrote:

Antwort ist falsch, Video passt nicht z. Anleitung. Auf dem Foto ist zu erkennen, daß i. d. Mitte des Pullis KEINE Maschen zugenommen sind, darum heißt es lt. Anleitung RAGLAN.Markierer habe ich lt. Anleitung korrekt gesetzt, 4 x 2 (mit je 2 Stäb. Abstand). Nächste Reihe = 4 x 2 Stäb. rechts der Marker zunehmen, in der nächsten Reihe links davon.Vergrößert sich d. Abstand innerhalb der Zunahmen oder bleiben immer die 2 Stäbchen Abstand (Raglanlinie)?Bitte Häkelschrift anfertigen.

08.02.2021 - 18:03

DROPS Design answered:

Es werden nicht 2 Stb pro Markierer zugenommen, sondern stets nur 1 Stb. Die Anleitung wurde inzwischen umformuliert, da sie an dieser Stelle doppeldeutig war - das Video passt zur Anleitung, da hier auch nur jeweils 1 Stb zugenommen wird. Sie häkeln die Zunahmen jedes Mal in das Stb neben dem Markierer. Eine Raglanlinie gibt es streng genommen nicht, da die Maschenzahl nicht bei 2 Stb bleibt - die Passe wird dadurch nach und nach zur Rundpasse. Zur Kontrolle Ihrer Markierer: Sie müssten anfangs je 20-21-22-23-26-30 Stb für das Vorderteil und das Rückenteil haben und je 8-10-12-14-14-17 Stb für die Ärmel, dazwischen je 2 Stb. Gutes Gelingen!

09.02.2021 - 10:47

country flag Flamarion wrote:

Keine Anfängerin, komme ebenfalls mit den Zunahmen nicht klar, Antworten und Video hilft nicht weiter. Im Video wird nur jeweils 1 Zunahme links od. rechts erklärt, wie aber mit 2 Zunahmen? Wieviel einzelne Stäbchen müssen zwischen den beiden Zunahmen pro Zunahmestelle generell sein? ?? Hinweis -> Ein Häkeldiagramm wäre wesentlich hilfreicher, in dem mehrere Reihen Zunahmen dargestellt sind, statt mit Worten oder nicht wirklich passendem Video zu erklären.

08.02.2021 - 14:21

DROPS Design answered:

Liebe Frau Flamarion, es wird bei der Passe nur 1 Masche bei jeder Markierung zugenommen, beim 1. Mal nehmen Sie an der rechten Seite jeder Markierer (= 8 Zunahmen), das nächste Mal, an der linken Seite jeder Markierer (=8 Zunahmen) - Deutsche Anleitung muss hier korrigiert werden, danke für den Hinweis, dh es wird genau wie im Video zugenommen. Viel Spaß beim häkeln!

08.02.2021 - 15:30

country flag Helena wrote:

Hej, jag har hittat ett garn som är 100g och 200 m med virknål 5. Kan jag använda det? Måste jag göra en större storlek eller ska jag räkna om på annat sätt?

10.03.2020 - 14:12

DROPS Design answered:

Hej Helena, din tröja vill bli tyngre. Viktigt att du håller virkfastheten som står i mönstret för att få rätt mått. Gör gärne ett litet prov så du ser hur det ser ut med 12 st x 7 varv på 10x10 cm. Lycka till

10.03.2020 - 14:56

country flag Peggie wrote:

Ik snap de eerste 8 markers niet zo, want als ik van het begin de een kantop 10 en na 2 en na 10 en na 2 doe en ik doe dat ook de andere kant op. Heb je aan de achterkant je21 steken ( want het begin van je toer was de achterkant) en dus niet aan de voorkant. Wat snap ik hier niet? Dank je wel voor antwoord

09.04.2019 - 17:07

DROPS Design answered:

Dag Peggie,

Als je vanaf het begin van de toer naar beide kanten toe markeerders plaatst dan heb je zowel aan de voor- als achterkant 20 steken tussen de markeerders. Het voor in achterpand is het zelfde wat dat betreft.

Na het plaatsten van de markeerdraden meerder je steken, waardoor je op het voor en achterpand aan beide kanten 21 steken hebt vanaf het midden voor/achter.

09.04.2019 - 20:48

country flag Savanna wrote:

Hello, I am confused on this part: "Then inc alternately on right and left side of every marker." So does that mean on Row 1 of inc, I increase on the Right side of the markers, then Row 2 of inc, I increase on the left side of markers and alternate like this. Or do I alternate each marker: Marker 1: Right side, Marker 2: Left side... continue with this pattern. Thank you.

14.01.2019 - 05:25

DROPS Design answered:

Dear Savanna, this video is showing how to incrase alternately on right and left side of markers. Happy crocheting!

14.01.2019 - 12:52

country flag Dorota wrote:

Witam. Zrobiłam 10 pierwszych okrążeń i teraz jak rozumiem mam wykonać 6 dodatkowych okrążeń a w tym w trzech mam dodać po 8 słupów. Ale to w sumie daje o 8 słupków za malo. Jak to zrobić żeby otrzymać 173 słupki a nie 165?

12.01.2019 - 11:29

DROPS Design answered:

Witaj Doroto! W rozmiarze M w 1-szym okr. masz 61 oś. W 2-gim okr. dodajesz 8 sł = 69 sł, w 3-cim dodajesz 8 sł = 77 sł. A następnie będziesz dodawać jeszcze 9 razy po 8 o. (72 o.) w każdym okrążeniu i 3 razy po 8 o. co 2 okrążenia (24 o.). 77+72+24= 173. Powodzenia!

14.02.2019 - 08:10