DROPS / 166 / 48

Fair & Squares by DROPS Design

Knitted DROPS jumper with texture, high collar, vent in the sides and rib in 2 strands ”Brushed Alpaca Silk”. Size: S - XXXL.

Tags: jumpers, oversized,

DROPS design: Pattern no as-044
Yarn group C+C or E
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS BRUSHED ALPACA SILK from Garnstudio
275-325-350-375-425-450 g colour no 13, denim blue

DROPS CIRCULAR NEEDLE (60 and 40 cm) SIZE 6 mm - or size needed to get 13 sts x 17 rows in stocking st = 10 x 10 cm with 2 strands.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.

77% Alpaca, 23% Silk
from 2.60 £ /25g
DROPS Brushed Alpaca Silk uni colour DROPS Brushed Alpaca Silk uni colour 2.60 £ /25g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 28.60£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (back and forth):
K all rows. 1 ridge = 2 rows K.

PATTERN:
See diagram A.1. The diagram shows all rows in pattern seen from RS.

INCREASE TIP:
Inc 1 st by making 1 YO, on next row K YO twisted (i.e. work in the back loop of st instead front) to avoid holes.
----------------------------------------------------------

JUMPER:
Piece is worked back and forth on circular needle in parts and sewn tog when finished.

BACK PIECE:
Cast on 69-75-81-87-93-102 sts on circular needle size 6 mm with 2 strands Brushed Alpaca Silk. Work rib as follows: 1 st in garter st, * K 1, P 2 *, repeat from *-* until 2 sts remain, K 1, 1 st in garter st. When rib measures 5 cm, work as follows: 1 st in garter st, K 1, P 2, A.1 (= 3 sts) until 5 sts remain, K 1, P 2, K 1, 1 st in garter st. REMEMBER THE KNITTING TENSION! When piece measures 12 cm, insert a marker in each side (marks vent). Now work pattern A.1 over all sts inside 1 edge st in garter st in each side. NOTE: Work next to last st on row seen from RS in stocking st. When piece measures 45-46-47-48-49-50 cm, cast off 2 sts in all sizes in each side for armholes = 65-71-77-83-89-98 sts. When piece measures 58-60-62-64-66-68 cm, cast off the middle 19-19-19-21-21-22 sts for neck and finish each shoulder separately. Continue to dec 1 st on next row from neck = 22-25-28-30-33-37 sts remain on the shoulder. When piece measures 60-62-64-66-68-70 cm, work 1 ridge over all sts before casting off. Work the other shoulder the same way.

FRONT PIECE:
Cast on and work as back piece. When piece measures 54-56-57-59-60-62 cm, slip the middle 11-11-11-13-13-14 sts on a stitch holder for neck and finish each shoulder separately. Then cast off sts on every row from neck as follows: 2 sts 2 times and 1 st 1 time = 22-25-28-30-33-37 sts remain for shoulder. When piece measures 60-62-64-66-68-70 cm - adjust after back piece, work 1 ridge before casting off. Work the other shoulder the same way.

SLEEVE:
Cast on 33-33-33-36-36-36 sts (incl 1 edge st in garter st in each side) with 2 strands Brushed Alpaca Silk on circular needle size 6 mm. Work rib as follows: 1 edge st in garter st, * K 1, P 2 *, repeat from *-* until 2 sts remain, K 1, 1 edge st in garter st. When rib measures 4 cm, work pattern as follows: 1 edge st in garter st, A.1 until 2 sts remain, work first st in A.1, 1 edge st in garter st. Continue like this until finished measurements. When piece measures 10-10-9-9-10-10 cm, beg inc inside 1 edge st in garter st in each side - read INCREASE TIP. Work the inc sts in pattern. Repeat inc every 12-9-7-6½-4½-3½ cm 3-4-5-5-7-8 more times = 41-43-45-48-52-54 sts. When piece measures 50-49-47-46-45-42 cm, cast off with K over K and P over P. Knit another sleeve the same way.

ASSEMBLY:
Sew the shoulder seams tog. Sew sleeves to body inside 1 edge st in garter st. Sew underarm seams and side seams in one inside 1 edge st in garter st but leave 12 cm for vent at the bottom of body.

NECK:
Beg mid back and pick up from RS 1 st in every st around the entire neck opening on circular needle size 6 mm with 2 strands Brushed Alpaca Silk. Work 1 round in stocking st AT THE SAME TIME adjust no of sts to 66-66-66-69-69-69. Then work A.1 for 10 cm, adjust after one whole repetition vertically. Cast off sts with K over K and P over P.

Diagram

= K from RS, P from WS
= P from RS, K from WS

Sophia 12.02.2019 - 10:10:

In front piece pattern say slip the middle 11st on st holder.how can I make the decreases ? Isn't the same way with back piece to decrease for neck?thank you.

DROPS Design 12.02.2019 kl. 11:39:

Dear Sophia, on front piece work each shoulder separately while slipping the middle 11 sts on a thread instead of casting them off (as on back piece), then continue each shoulder separately back and forth casting off at the beg of every row from neck 2 sts 2 times and 1 st 1 time. you will then later slip sts from thread back on needle and pick up sts around neck for neck edge. Happy knitting!

Sophia 04.02.2019 - 10:07:

Τι εννοείτε όταν λέτε βάλτε ένα σημάδι σε κάθε πλευρά ; mark vent;που θα μπούν τα σημάδια ακριβώς; Ευχαριστώ.

Sophia 03.02.2019 - 22:12:

What do you mean in NoTE:work next to last st.on row seen fromRs In stocking st?thank you.

DROPS Design 04.02.2019 kl. 13:53:

Dear Sophia, the next to last stitch will be worked in stocking stitch, ie K from RS and P from WS. Happy knitting!

Majbrith Havn Christensem 25.12.2017 - 17:38:

Hej Jeg kan ikke få ærmerne til st passe. Det er som om det er for få masker. Strikker i medium og ærmet bliver simpelthen for smalt, hvis jeg strikker efter opskriften. Jeg tror heller ikke længden af ærmerne passer, da ærmet er længere i str. Small i forhold til xl. Er der mon en fejl? Mvh Majbrith

DROPS Design 02.01.2018 kl. 11:42:

Hej Majbrith, Jo hvis du har 43 masker til sidst som der står i opskriften, så måler det 33 cm hvis du overholder strikkefastheden (43/1,3= 33cm). Luk LØST af! Strikker du med 2 tråde Brushed Alpaca Silk?

Asma 29.10.2016 - 17:49:

Bonjour, comment se tricote les 5 premières et les 5 dernières mailles du dos après les 5 cm de côtes sur les rangées envers? Merci!

DROPS Design 31.10.2016 kl. 10:06:

Bonjour Asma, on commence par 1 m point mousse, 1 m end, 2 m env, on répète A.1 et on termine par 1 m end, 2 m env, 1 m end et 1 m point mousse. Sur l'envers, on tricote: 1 m point mousse, 1 m env, 2 m end, 1 m env, on tricote A.1 et on termine par 2 m end, 1 m env, 1 m point mousse. Bon tricot!

Lisa Szkotak Jensen 28.01.2016 - 15:03:

Jeg vil stikke denne model (166-48) str. Large. Kan jeg bruge garn Melody med 1 tråd og tilpasse pinde efter opskriftens strikkeprøve. Kan du regne det ud for mig. Regner med at købe 400 gr Melody fv 14. På forhånd tak. Venlig hilsen Lisa

DROPS Design 01.02.2016 kl. 16:04:

Hej Lisa. Du kan sagtens strikke denne med 1 traad Melody og du skal holde strikkefastheden som angivet i mönstret. Saa strik en pröve först og brug den pind som du skal bruge for at faa 13 m x 17 p glatstrik paa 10 x 10 cm.

Brummer 15.01.2016 - 09:02:

Wie muss man für den Arm zunehmen? Ich sehe dazu nichts in der Anleitung.

DROPS Design 23.01.2016 kl. 18:07:

Unter Ärmel steht, wie Sie zunehmen müssen: "Bei einer Gesamtlänge von 10-10-9-9-10-10 cm beidseitig neben der Rand-M mit den Zunahmen beginnen - ZUNAHMETIPP lesen!" - Sie müssen also zusätzlich noch oben am Beginn der Anleitung den Zunahmetipp lesen. Und weiter: "Diese Zunahmen alle 12-9-7-6½-4½-3½ cm noch weitere 3-4-5-5-7-8 x wdh".

Dilianne 17.12.2015 - 18:53:

Inderdaad zeg, dan wordt de trui wel erg zwaar en heb ik heel veel nodig. Het is dus niet mogelijk om deze met 1 draad te breien in plaats van met een dubbele draad Paris (ik vind die brushed alpaca wel mooi maar het is zo warm)?

DROPS Design 18.12.2015 kl. 15:44:

Hoi Dilianne. Ik denk dat het wel kan, wel wordt de steek wat losser. Dus brei eerst een proeflapje met de juiste stekenverhouding en beslis of je het mooi vindt.

Dilianne 17.12.2015 - 09:26:

Als ik deze trui met alternatief Paris ga breien, kan ik dan hetzelfde aantal steken aanhouden als in het patroon vermeld staan? Alvast hartelijk dank voor een reactie.

DROPS Design 17.12.2015 kl. 13:43:

Hoi Dilianne. Je kan inderdaad 2 Brushed Alpaca vervangen door Paris. Je breit deze trui met 2 draden, dus let op dat hij wel erg zwaar wordt (je hebt bijvoorbeeld 21 bollen nodig = 1050 gr - voor de kleinste maat). En brei altijd een proeflapje eerst voor de juiste stekenverhouding.

Anna.blomquist 29.11.2015 - 23:51:

Bilden stämmer enligt min mening inte med beskrivningen, kragen saknas? och hur är den egentligen stickad runt halsen? Varför frågor på rundstickor när de ligger med i beskrivningen. Stämmer verkligen garnåtgången, 3 hg till en så stor tröja? verkar inte OK. Tacksam för förtydligande! Med vänlig hälsning, Anna

DROPS Design 30.11.2015 kl. 09:44:

Hej. Bilden ska stämma med beskrivningen. Kragen gör att den går upp i halsen högre än den skulle ha gjort annars. Kragen gör du genom att sticka upp maskor runt hela halsöppningen, justera maskantalet enligt mönster och sticka A.1 i 10 cm. Frågorna om rundstickor beror på att denna modell inte stickas runt, trots att det används rundstickor, utan fram och tillbaka. Garnåtgången ska stämma, Brusched alpaca silk är ett väldigt lätt garn och det är 25 g per nystan. Lycka till!

Post a comment to pattern DROPS 166-48

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.