DROPS BabyAlpaca Silk
DROPS BabyAlpaca Silk
70% Alpaca, 30% Silk
Discontinued
find alternatives
DROPS Super Sale
DROPS 165-11
DROPS design: Pattern no bs-084
Yarn group A
----------------------------------------------------------
Measurements: Length in the middle: Approx. 73 cm Width: Approx. 146 cm
Materials:
DROPS BABYALPACA SILK from Garnstudio
300 g colour no 4088, heather

DROPS CROCHET HOOK SIZE 3.5 mm – or size needed to get 22 tr x 12 rows = 10 x 10 cm.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS BabyAlpaca Silk
DROPS BabyAlpaca Silk
70% Alpaca, 30% Silk
Discontinued
find alternatives

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
MEASURING TIP:
Always measure from the first ch worked and down along the tip of shawl.

CROCHET INFO:
Replace first tr at beg of every tr row with 3 ch.
Replace first dtr at beg of every dtr row with 4 ch.
At beg of every row with triple tr replace first triple tr with 5 ch + 1 ch (to avoid a tight edge) = 6 ch.

PATTERN:
See diagrams A.1-A.5.

INC TR-GROUP:
Work 2 tr in first tr, 1 ch (= tip), skip 1 ch, 2 tr in next tr = 2 tr inc in tip. NOTE: On 3rd row in A.2, inc with double tr instead of tr!

INCREASE TIP:
On every row with tr (and A.2) inc with 2 tr in first and last st on every row and work a inc tr-group in the tip of shawl (= 4 tr inc on row). NOTE: On 3rd row in A.2, inc with double tr instead of tr!
----------------------------------------------------------

SHAWL:
Worked back and forth.

ROW 1 (= from WS): Work according to diagram A.1 as follows: Work 7 ch (= 1 triple tr + 1 ch) - READ CROCHET INFO with BabyAlpaca Silk on hook size 3.5 mm. Work 1 ch, (1 dtr, 4 ch, 1 dtr) in first ch on row, work 2 ch, insert a marker (= tip of shawl) - move it upwards until finished measurements, 2 ch, (1 dtr, 4 ch, 1 dtr) in first ch on row, 1 ch, 1 triple tr in first ch.
ROW 2: Work 8 ch, 7 dtr around next ch-space, 2 ch, 1 dtr around next ch-space (= tip), 2 ch, 7 dtr around ch-space, 2 ch, 1 triple tr in 6th ch on previous row.
ROW 3: Work 8 ch, (1 dtr, 4 ch, 1 dtr) in last ch from previous row, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch, skip next ch-space, (1 dtr, 4 ch, 1 dtr) in the middle dtr from previous row, 4 ch (= tip), (1 dtr, 4 ch, 1 dtr) in same dtr, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch, (1 dtr, 4 ch, 1 dtr) in 6th ch from previous row, 2 ch, 1 triple tr in 6th ch on previous row.
ROW 4: Work A.Z like this: 8 ch, skip 1 ch-space, 7 dtr around next ch-space, 2 ch. Work A.1a as follows: 1 dtr in the middle of the 3 dtr, 2 ch, skip 1 ch-space, 7 dtr around next ch-space, 2 ch. Work 1 dtr around next ch-space (= tip). Therafter work A.1b as follows: 2 ch, 7 dtr around next ch-space, 2 ch, 1 dtr in the middle of the next 3 dtr. Work A:X as follows: 2 ch, skip 1 ch-space, 7 dtr around next ch-space, 2 ch, 1 triple tr in 6th ch on previous row. REMEMBER THE CROCHET TENSION!
ROW 5: Work A.X as follows: 8 ch, (1 dtr, 4 ch, 1 dtr) in last ch from previous row, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch. Work A.1b as follows: Skip 1 ch-space, (1 dtr, 4 ch, 1 dtr) in next dtr, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch. Skip 1 ch-space (1 dtr, 4 ch, 1 dtr) in the middle dtr on shawl, 4 ch (= tip). Work A.1a as follows: (1 dtr, 4 ch, 1 dtr) in same dtr, skip 1 ch-space, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch, skip 1 ch-space, (1 dtr, 4 ch, 1 dtr) in next dtr, skip 1 ch-space. Work A.Z as follows: 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch, skip 1 ch-space, (1 dtr, 4 ch, 1 dtr) in 6th ch on previous row, 2 ch, 1 triple tr in 6th ch.
ROWS 6-11: Continue with pattern as explained on 4th and 5th row, AT THE SAME TIME work A.1a and A.1b over the new inc sts in A.x and A.Z. There are now 5 dtr groups vertically along tip of shawl and piece measures approx. 24 cm - READ MEASURING TIP.

Now work A.2 as follows: Work 3 ch (= 1 tr), work 1 tr more in last dtr from previous row (= 1 tr inc), continue with 1 tr in every dtr and 1 tr around every ch until the middle ch-space (= tip), then work 1 tr around ch-space, 2 tr in the first of the two middle ch (= 1 tr inc), 1 ch, 2 tr in next ch (= 1 tr inc), 1 tr around same ch-space. Continue with 1 tr in every dtr and 1 tr around every ch and work 2 tr in 6th ch at beg of previous row (= 1 tr inc) = 4 tr inc in total and 156 tr on row (= 78 tr on each side of tip).
Then continue from 2nd row in A.2, AT THE SAME TIME continue the same inc - READ INCREASE TIP and work an INC TR-GROUP - see explanation above, beg in tr before ch in the tip of shawl. NOTE: On 3rd work 1 ch before inc tr-group and before the last inc on row so that the pattern is symmetrical. (I.e. 2 extra tr are inc on next row when 1 tr is worked around these 2 extra ch).
When entire A.2 has been worked 1 time vertically, there are 174 tr on row. Then work 5 rows of A.2 1 more time vertically the same way (= 22 tr inc) = 198 tr.

Now continue inc as at beg of shawl as follows - see diagram A.3-A.5:
ROW 1: Work 8 ch, * (1 dtr, 4 ch, 1 dtr) in next tr, 2 ch, skip 2 tr, 1 tr in each of the next 3 tr, 2 ch, skip 2 tr *, repeat from *-* 11 more times, skip 1 tr, (1 dtr, 4 ch, 1 dtr) in next tr (= first tr of the 2 middle tr), 4 ch (= tip), (1 dtr, 4 ch, 1 dtr) in next tr (= second tr of the middle 2 tr), ** 2 ch, skip 2 tr, 1 tr in each of the next 3 tr, 2 ch, skip 2 tr, (1 dtr, 4 ch, 1 dtr) in next tr **, repeat from **-** 11 more times, 2 ch, 1 triple tr in last tr on row.
ROW 2: Work 8 ch, skip 1 ch-space, * 7 dtr around next ch-space, 2 ch, 1 dtr in the middle of the 3 tr, 2 ch, skip 1 ch-space *, repeat from *-* 11 more times, 7 dtr around next ch-space, 2 ch, 1 dtr around next ch-space (= tip), 2 ch, 7 dtr around next ch-space, ** 2 ch, 1 dtr in the middle of the next 3 tr, 2 ch, skip 1 ch-space, 7 dtr around next ch-space **, repeat from **-** 11 more times, 2 ch, 1 triple tr in 6th ch on previous row.
ROW 3: Work 8 ch, (1 dtr, 4 ch, 1 dtr) in last ch from previous row, * 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch, skip 1 ch-space, (1 dtr, 4 ch, 1 dtr) in next dtr, skip 1 ch-space *, repeat from *-* 11 more times, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch, skip 1 ch-space, (1 dtr, 4 ch, 1 dtr) in next dtr, 4 ch (= tip), (1 dtr, 4 ch, 1 dtr) in same dtr, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch, ** skip 1 ch-space, (1 dtr, 4 ch, 1 dtr) in next dtr, skip 1 ch-space, 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch **, repeat from **-** 11 more times, skip 1 ch-space, (1 dtr, 4 ch, 1 dtr) in 6th ch on previous row, 2 ch, 1 triple tr in same ch.

Now work A.2 as follows: Work 3 ch (= 1 tr), work 1 tr more in last dtr on previous row (= 1 tr inc), continue with 1 tr in every dtr and 1 tr around every ch until the middle ch-space on shawl (= tip), then work 1 tr around ch-space, 2 tr in the first of the two middle ch (= 1 tr inc), 1 ch, 2 tr in next ch (= 1 tr inc), 1 tr around same ch-space. Continue with 1 tr in every dtr and 1 tr around every ch and work 2 tr in 6th ch at beg of previous row (= 1 tr inc) 364 tr on row (= 182 tr on each side of tip).
Then continue from 2nd row in A.2, AT THE SAME TIME continue the same inc and work an INC TR-GROUP - see explanation above, beg in tr before ch in the tip of shawl. NOTE: On 3rd row work 1 ch before inc tr-group and before the last inc on row to make it symmetrical. I.e. inc 2 tr on next row when working 1 tr around these 2 ch, AT THE SAME TIME on last row inc 8 tr evenly (i.e. 4 tr on each side of tip) = 390 tr on row.

Now continue from arrow in diagram A.3, A.4 and A.5 the same way as before but now work A.3 24 times in total before A.4 (= inc in tip), and A.5 24 times in width after A.4. When A.3-A.5 has been worked vertically, continue pattern and inc as shown on 2nd-5th row in diagram until piece measures 75 cm in total along tip - adjust to finish on a row which is like 4th row in diagram. Fasten off.

This pattern has been corrected.

Updated online: 24.10.2016
Correction:...I.e. inc 2 tr on next row when working 1 tr around these 2 ch, AT THE SAME TIME on last row inc 8 tr evenly (i.e. 4 tr on each side of tip) = 390 tr on row...

Diagram

symbols = 1 ch
symbols = 6 ch
symbols = 1 tr
symbols = 1 tr around ch-space
symbols = 1 tr worked in back loop from RS, 1 tr worked in front loop from WS
symbols = 1 dtr
symbols = 1 dtr around ch-space
symbols = 1 dtr in the middle of the 3 tr
symbols = 1 triple tr in st below
symbols = 7 dtr around ch-space below
symbols = 2 ch, 1 dtr in each of the middle 3 dtr, 2 ch
symbols = 1 dtr in st below, 4 ch, 1 dtr in same st.
symbols = beg on row with arrow
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 165-11

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (70)

country flag Janick wrote:

Bonjour, pourquoi n'utilisez pas les symboles internationaux pour vos diagrammes ? C'est totalement illisible... Je voulais faire ce modèle mais je vais le jeter, je suis incapable de déchiffrer le diagramme sans y passer quatre heures en de demandant si ce truc bizarre en forme de crochet est une bride, une double bride ou un autre truc. Vous devriez sérieusement revoir votre façon de dessiner les diagrammes, c'est tout simplement... Illisible. Désolée. Un beau modèle, mais poubelle.

24.08.2016 - 14:18

DROPS Design answered:

Bonjour Janick, vous trouverez la signification de chaque symbole utilisé dans le diagramme juste au-dessus du diagramme, mais également dans les explications écrites. Bon crochet!

25.08.2016 - 09:53

country flag Nankoe wrote:

Beste Jeanette, wilt u mij een betere uitleg geven bij A.2? Bestaat A.2 uit 6 toeren? Met hoeveel stokken vermeerder je elke toer? Toer 1 ben ik wel uitgekomen, daar heb ik 156 stokken; in het midden "de punt" heb ik 3 stokken, 1 losse, 3 stokken. Is dit goed? De uitleg vanaf toer 2 begrijp ik niet helemaal, waardoor ik niet verder kan. Ik wacht uw reactie af. Bij voorbaat dank. Mvg, Rinia R. Nankoe

09.08.2016 - 14:28

DROPS Design answered:

Beste mevrouw Nankoe, A.2 bestaat uit 5 toeren, zie de tekening onderaan. Meerderen doet u net als eerder, aan de zijkanten en in het midden. Op elke toer met stk meerdert u in totaal 4 stk, dit staat beschreven bovenaan, bij de tip voor het meerderen. De punt hebt u zo goed gehaakt.

09.08.2016 - 16:02

country flag Isabelle wrote:

Bonjour, mon échantillon fait 18 brides et 12 rangs avec le crochet 3.5, et après le 11ème rang je n'ai que 20 cm. au lieu de 24 ; avec le crochet n° 4 c'est beaucoup trop détendu et certainement beaucoup trop large; que puis-je faire ? Merci d'avance (et bravo pour tous les modèles que vous mettez gracieusement à disposition, je salue particulièrement le fait qu'il existent en xxxl, impossible de trouver ça ailleurs)

21.04.2016 - 21:51

DROPS Design answered:

Bonjour Isabelle, essayez de crocheter plus souplement avec le crochet 3,5 ou de serrer davantage avec le crochet 4 pour avoir le bon échantillon, le châle doit être suffisamment souple. Si vous conservez une tension plus serrée, il vous faudra adapter les explications sur votre tension et probablement davantage de fil. Bon crochet!

22.04.2016 - 08:55

country flag Susanne Lyngbo wrote:

Jeg er igang med A.2 og de første rækker passer med antal, og så passer opskriften ikke længere - samme problem som de andre også skriver om. På billedet kan jeg se at der skal være en række hulmønster imellem A.2 - som ikke er beskrevet i opskriften. Skal de hulrækker hækles alm. st. eller dbl-st? Er det ikke muligt at opdatere opskriften, så den bliver korrekt?

16.03.2016 - 18:33

DROPS Design answered:

Hej Susanne, Se rettelsen i opskriften. God fornøjelse!

01.02.2017 - 08:30

country flag Susanne Lyngbo wrote:

Jeg sidder lige som de andre med A2 og kan ikke få masketallet til at gå op? Men kan se på billedet at der mangler hulrækken efter de 2 første rækker der. Er den række hæklet med dbl-st? Er det korrekt, når man skal starte med mønster igen, som skal gentages, at der på rk. 1 skal der hækles med st ved de 3 og ikke som tidligere dbl-st? I har ikke tænkt jer at rette opskriften til, for alle os der har købt garn til dette skønne sjal?

16.03.2016 - 09:40

DROPS Design answered:

Hej Susanne, Hvor langt er du kommet med sjalet. Hvor i opskriften er du? Har du læst både UDTAGNINGS ST-GRUPPE og UDTAGNINGSTIPS? Du hækler sjalet ovenfra og ned, husk udtagningerne i spidsen. Og du hækler diagrammerne fra nederste højre hjørne og op.

16.03.2016 - 15:57

country flag Emma Johnsson wrote:

Hej, jag sitter och ska göra A.2 för andra gången och efter mycket klurande fick jag till det första gången, men nu har jag verkligen kört fast. det sista varvet med 6 st i ökningen ska de se precis runt spetsen eller är de så att de ska fördelas över hela arbetet?

05.03.2016 - 12:42

DROPS Design answered:

Hej, ökningarna skall fördelas på samma sätt som första gången du virkar A.2. Lycka till!

07.03.2016 - 15:25

country flag Lena Edstam wrote:

Efter man virkat A2 partiet ( 5 varv) första gången så får jag fram att det blir 176 st. Detta kan sen stämma med 22 ökningar = 198 st. Har inte hunnit virkat andra omgången med A2 ännu.

03.03.2016 - 01:25

country flag Lena Edstam wrote:

Efter man virkat A2 partiet ( 5 varv) första gången så får jag fram att det blir 176 st. Detta kan sen stämma med 22 ökningar = 198 st. Har inte hunnit virkat andra omgången med A2 ännu.

03.03.2016 - 01:20

country flag Isabelle FLANDIN-GARCIA wrote:

Bonjour, Je me suis lancée dans la confection de ce magnifique châle. J'ai bien pris la bonne laine et le bon crochet, mais à la réalisation, il est beaucoup plus petit que le modèle (environ 3 fois plus petit). J'avoue ne pas être une experte. Dois-je rajouter des tours pour avoir un motif identique à la photo ? Merci pour tous les modèles que vous proposez. Isabelle

22.02.2016 - 12:52

DROPS Design answered:

Bonjour Mme Flandin-Garcia, aviez-vous bien le bon échantillon de 22 brides x 12 rangs = 10 x 10 cm? Pensez à ajuster la taille du crochet pour avoir le bon échantillon. Bon crochet!

22.02.2016 - 15:28

country flag Maja wrote:

Jeg får spørre en gang til, ettersom jeg ikke kommer videre: Jeg skal hekle A2 for annen gang. Etter første gang skal det være 174 staver på raden, og det har jeg. Men så står det at etter de neste 5 radene i A2 skal det være økt 22 staver og at antallet da skal være 198. Men 174 og 22 blir jo bare 196 staver. Hva er riktig, 22 økninger eller 198 staver? Jeg synes heller ikke jeg får maskeantallet i rad 3 i A2 annen gang til å gå opp. Hvor mange masker skal det egentlig være?

15.01.2016 - 17:08

DROPS Design answered:

Hej Maja, Kan det evt være de 2 økninger i spidsen som tidligere som gør at det bliver 198 staver?

11.03.2016 - 12:31