DROPS Muskat
DROPS Muskat
100% Cotton
from 3.90 CAD /50g
Get the yarn to make this pattern from 50.70CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Summer Feeling

Knitted DROPS dress with lace pattern and raglan in ”Muskat” or "Belle". Worked top down. Size: S - XXXL.

DROPS 160-1
DROPS design: Pattern no r-671
Yarn group B
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Finished measurements:
Bust: 82-88-96-106-120-130 cm / 32 1/4"-34½"-37 3/4"-41 3/4"-47 1/4"-51½"
Full length: 84-86-88-90-92-94 cm / 33"-34"-34½"-35½"-36 1/4"-37"

Materials:
DROPS MUSKAT from Garnstudio
650-750-800-900-950-1050 g color no 08, off white

Or use:
DROPS BELLE from Garnstudio
550-650-700-750-800-900 g colour no 02, off white

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE (60 and 80 cm / 24'' and 32'') SIZE 4 mm/US 6 - or size needed to get 21 sts x 28 rows in stockinette st = 4'' x 4'' (10 x 10 cm).
DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (60 and 80 cm / 24'' and 32'') SIZE 3.5 mm/US 4 - for edge in garter st.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Muskat
DROPS Muskat
100% Cotton
from 3.90 CAD /50g
Get the yarn to make this pattern from 50.70CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
PATTERN:
See diagrams A.1 to A.6.

DECREASE TIP:
Dec 1 st before marker as follows: Work until 2 sts remain before marker, slip 1 st as if to K, K 1, psso.
Dec 1 st after marker as follows: K 2 tog.

RAGLAN:
Inc differently for raglan in the different sizes:
SIZE S-M:
Inc 1 sts on each side of each marker (= 8 sts inc in total) as follows: 1 YO, K 1 twisted, K 1 (= st with marker), K 1 twisted, 1 YO. NOTE: The inc on each sides of 1st marker (= in the last st on round) is worked as follows: at beginning of round, K 1 twisted, 1 YO. At the end of round: 1 YO, K 1 twisted, K.1 (= st with marker) Do not work YOs twisted on next round, they should make holes, repeat inc every other round 17-19 more times.
SIZE L-XL-XXL-XXXL:
Inc 2 sts on each side of each marker (= 16 sts inc in total each round) as follows: 1 YO, K1, 1 YO, K 1 twisted, K 1(= st with marker), K 1 twisted, 1 YO, K 1, 1 YO (first and last YO is worked twisted on next round, it should not make a hole but, the 2 midle YO should be K as normal and make a hole). Repeat inc on every other round 1-1-1-3 more times. NOTE: The inc on eich side of 1st marker(= in the last st on round) is worked as follows: at beginning of round, K 1 twisted, 1 YO, K 1, 1 YO. At the end of round: 1 YO, K 1, 1 YO, K 1 twisted, K.1 (= st with marker)
Then inc like as follows:
Inc 1 sts at each side of each marker (= 8 sts inc in total) as follows: 1 YO, K 1 twisted, K 1(= st with marker), K 1 twisted, 1 YO. Do not K YOs twisted on next round, they should make holes. Repeat inc every other round 19-20-22-21 more times in total.

INCREASE TIP:
Inc 1 st by making a YO. On next round K YO twisted to avoid holes.
----------------------------------------------------------

YOKE:
Worked in the round on circular needle, top down. Cast on 134-134-140-144-144-148 sts on circular needle size 3.5 mm / US 4 with Muskat or "Belle". Work A.1 (= 2 sts) over all sts. When A.1 has been worked 1 time vertically, switch to circular needle size 4 mm / US 6. On next round K all sts and inc 16-20-14-22-42-46 sts evenly = 150-154-154-166-186-194 sts. On next round insert 4 markers in the midle st of each raglan as follows: Insert 1st in last st on round, K 45-47-49-55-65-71 sts (= front piece), K 1 sts and insert 2nd marker in this st, K 28-28-26-26-26-24 sts (= sleeve), K 1 sts and insert 3rd marker in this st, K 45-47-49-55-65-71 sts (= back piece), K 1 st and insert 4th marker in this st, K 28-28-26-26-26-24 sts (= sleeve). K 1 sts (1st marker is placed in this st). REMEMBER THE KNITTING GAUGE

Then work as follows - AT THE SAME TIME inc for RAGLAN - see explanation above. Work half the raglan inc for 1st marker (see explanation above) K 13-14-14-17-22-25 K 14-15-16-19-24-27 sts, A.2 (= 17 sts), K until 1-1-2-2-2-2 st remains before 2nd marker, work RAGLAN - see explanation above, K until 1-1-2-2-2-2 sts remain before 3rd marker, work raglan, K 0-1-1-4-9-12 sts, A.3 (= 43 sts), K until 1-1-2-2-2-2 st remains before 4th marker, work raglan, K until 1-1-2-2-2-2 sts remain before 1st marker, work raglan. Work the inc sts in stockinette st until they can be worked in pattern as shown in A.3.

When A.2 has been worked 1 time vertically, work in stockinette st over all these sts. When A.3 has been worked 1 time vertically, work A.4 (= 57 sts) over A.3. After all inc are done there are 294-314-338-358-394-426 sts on needle. Piece measures approx. 14-15-16-17-18-19 cm / 5½''-6''-6¼''-6¾''-7''-7½''. Continue with pattern and stockinette st as before AT THE SAME TIME work as follows: Work the first 81-87-95-103-117-129 sts (= front piece), slip the next 66-70-74-76-80-84 sts on a stitch holder for sleeve, cast on 6-6-6-8-8-8 sts under sleeve (insert a marker in the middle of the new sts), work the next 81-87-95-103-117-129 sts (= back piece), slip the next 66-70-74-76-80-84 sts on a stitch holder for sleeve, cast on 6-6-6-8-8-8 sts under sleeve (insert a marker in the middle of the new sts) = 174-186-202-222-250-274 sts remain on needle. Insert 1 marker in piece, NOW MEASURE PIECE FROM HERE. Continue to work A.4 and stockinette st over the remaining sts. When piece measures 3 cm / 1'', dec 1 st on each side of each markers in the sides (= 4 sts dec) - READ DECREASE TIP! Repeat dec every 2½-4-4-4-4-4 cm / 7/8"-1½"-1½"-1½"-1½"-1½" 5-3-3-3-3-3 more times = 150-170-186-206-234-258 sts. When A.4 has been worked 1 time vertically, work in stockinette st over all sts. When piece measures 18-19-20-21-22-23 cm / 7''-7½''-8''-8¼''-8 ¾''-9'' insert 4 markers as follows: Work 15-17-19-21-25-27 sts, insert 1st marker, work 45-51-55-61-67-75 sts, insert 2nd marker, work 30-34-38-42-50-54 sts, insert 3rd marker, work 45-51-55-61-67-75 sts, insert 4th marker, work the remaining 15-17-19-21-25-27 sts. 1st and 2nd marker are on front piece, and 3rd and 4th marker are on back piece. Move the markers upwards when working. On next round inc 1 st before 1st and 3rd marker and 1 st after 2nd and 4th marker (= 4 sts inc) - READ INCREASE TIP. NOTE: No of sts mid front and mid back is the same, inc in side sts.

Repeat inc every 6th round 1 more time, then every 4th round 6-5-6-5-6-10 times, then every other round 22-18-22-18-18-8 times = 270-270-306-306-338-338 sts. On next round, inc 2-2-0-0-2-2 sts evenly = 272-272-306-306-340-340 sts. Work in stockinette st until piece measures 45-46-47-48-49-50 cm / 17¾''-18''-18½''-19''-19¼''-19¾'' (or desired length, approx. 25 cm / 9 3/4'' remain). Then work A.6 (= 34 sts) 8-8-9-9-10-10 times in total in width. When A.6 has been worked 1 time vertically, switch to circular needle size 3.5 mm / US 4. Work A.5 over all sts. Bind off.

SLEEVE:
Worked in the round on double pointed needles. Slip sts from stitch holder back on double pointed needles size 4 mm / US 6 and cast on 6-6-6-8-8-8 sts under sleeve = 72-76-80-84-88-92 sts.
Work in stockinette st for 2 cm / 3/4'', on next round dec 8 sts evenly = 64-68-72-76-80-84 sts. Switch to double pointed needles size 3.5 mm / US 4. Work A.5 over all sts. Bind off. Work the other sleeve the same way.

This pattern has been corrected.

Updated online: 06.03.2015
(YOKE: One number missing in size L in explenation for raglan.)
Updated online: 01.06.2015
Raglan and yoke has been rephrased.
Updated online: 13.12.2018
Correction - RAGLAN: 1/2 of the inc for raglan by the 1st marker is done at the beginning of the round, and the other 1/2 at the end of round. Correction - YOKE:Work half the raglan inc for 1st marker (see explanation above) K 12-14-14-17-22-25 sts, A.2 (= 17 sts), K until 1-1-2-2-2-2 st remains before 2nd marker, work RAGLAN - see explanation above, K until 1-1-2-2-2-2 sts remain before 3rd marker, work raglan, K 0-1-1-4-9-12 sts...
Updated online: 12.03.2019
Correction - YOKE: Work half the raglan inc for 1st marker (see explanation above) K 13-14-14-17-22-25 sts

Diagram

symbols = K
symbols = P
symbols = slip 1 st as if to K, K 1, psso
symbols = K 2 tog
symbols = 1 YO between 2 sts
symbols = slip 1 st as if to K, K 2 tog, psso
diagram
diagram
diagram
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Summer Feeling

Kamila, Czech Republic

Summer Feeling

EGEA, France

Summer Feeling

Jo, South Africa

Summer Feeling + Winter Dunes

Joanna Piotrowska, United Kingdom

160-1 Summer Feeling

Viktoria, Russian Federation

160-1 Summer Feeling

Johanna, Sweden

Summer Feeling

JoeJ5, France

Post a comment to pattern DROPS 160-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (217)

country flag Irmgard wrote:

Ist es tatsächlich so gedacht, dass das Muster am Saum nicht symmetrisch ist?

17.03.2024 - 14:39

DROPS Design answered:

Liebe Irmgard, das Lochmuster sollte zentrier sein, beachten Sie, daß es richtig gestrickt wird. Viel Spaß beim Stricken!

18.03.2024 - 09:22

country flag Yvonne Havelaar wrote:

Hallo, Ik ben bezig met maat l van deze jurk te maken, maar als ik de raglan moet maken dan kom ik niet uit met de meerdering die jullie aan geven . 1 steek voor de markering maar moet dat niet 2 steken zijn. Want hoe doe je anders 1 omsl 1 r.1 omsl. 1r gedr. en dan de gemarkeerde r.?

19.11.2023 - 11:35

DROPS Design answered:

Dag Yvonne,

Je meerdert inderdaad 2 steken aan beide kanten van elke markeerder. Dit staat ook aangegeven bovenaan bij RAGLAN onder maat L-XL-XXL-XXXL.

21.11.2023 - 23:12

country flag Yvonne Havelaar wrote:

Hallo, Ik ben bezig met maat l van deze jurk te maken, maar als ik de raglan moet maken dan kom ik niet uit met de meerdering die jullie aan geven . 1 steek voor de markering maar moet dat niet 2 steken zijn. Want hoe doe je anders 1 omsl 1 r.1 omsl. 1r gedr. en dan de gemarkeerde r.?

19.11.2023 - 11:34

country flag Elina wrote:

Merkkien selityksessä ei ole ruutupiirrosten selitystä kyllä oikein. Jos on poikki viiva kahden "silmukan" yli ja sen perässä pystyssä soikio niin onko se kaksi yhteen ja langankierto? Muutoin ei kyllä tule reikiä eikä merkkien selitykset ole ajantasalla.

11.05.2023 - 10:05

DROPS Design answered:

Kun piirroksessa on poikkiviiva, tämän merkin kohdalla neulotaan 2 silmukkaa yhteen. Soikion kohdalla tehdään 1 langankierto 2 silmukan väliin (tämä kohta on merkitty erikseen, katso merkkien selitykset).

12.05.2023 - 14:15

country flag Corry wrote:

Ich bin bei dieser Stelle wo man die markierer gesetzt hat und nun soll ich gleichzeitig stricken und die raglanzunahmen machen. Geht aber nicht, da man bei der Vorrunde beim Setzen der markierer genau bei der 1. Markierten Masche ankommt und nun steht da man soll eine halbe raglanzunahme stricken... was soll das dann sein und wie mache ich das, wenn die nächste Masche schon die markierte ist? Liebe Grüße

22.02.2023 - 21:20

DROPS Design answered:

Liebe Corry, am Anfang der Runde stricken Sie die Raglanzunahmen mit der rechts verschränke Masche nach der rechte Maschen mit der Markieurng - die Zunahme vor dieser Markierung stricken Sie am Ende der Runde. Viel spaß beim stricken!

23.02.2023 - 13:42

country flag Cianna wrote:

I am a little confused at the point to separate the sleeves. I am making the XL pattern and it says I should finish A.3 and begin A.4, then I should have 358st which is about 6 3/4", but 358st is several rows before the end of A.3 and under 6". I am confused because I am on gauge but not sure what went wrong. I also noted that with my larger chest the neckline is a little wide and the back is just a little too wide. I may have to adjust the pattern.

03.02.2022 - 21:54

DROPS Design answered:

Dear Cianna, when piece all increases are done, there are 358 sts and piece measures 6¾'', continue in pattern as explained before, but now divide piece for body and sleeve. When A.3 will be workred, just work A.4 over A.3 (this might happen after dividing piece, just make sure height is right to avoid tight armholes). Happy knitting!

04.02.2022 - 08:40

country flag Mathilde wrote:

Hej, jeg er forbi alle raglan udtagninger (20 i alt) og skal til at tage af til ærmer. Størrelse M. Jeg har 314 masker rundt, men mit arbejde måler 20 cm. Jeg har strikket med de foreslåede pinde og garntype (muskat), og synes ikke jeg strikker særlig løst. Hvordan kan det passe?

27.08.2021 - 18:31

DROPS Design answered:

Hei Mathile. Strikket du en prøvelapp før du begynte? Og fikk du da en strikkefasthet på 21 masker x 28 pinner glattstrikk på 10 x 10 cm med pinne 4? Husk at strikkefastheten er veiledende, får du ikke den oppgitt strikkefastheten som er oppgitt i oppskriften, må du prøve med en tynnere eller tykkere pinne, slik at strikkefastheten stemmer. Da vil også målene stemme med det som står i oppskriften. mvh DROPS design

30.08.2021 - 12:00

country flag Sandra Lúcia wrote:

Gostaria de saber se tem como comprar essas peças lindas e qual valor e procedimento ? Obrigada ...

16.07.2021 - 10:58

DROPS Design answered:

Bom dia, Pode comprar os fios para tecer estas peças nas lojas DROPS. Veja a lista de lojas que falam português no link abaixo: https://www.garnstudio.com/findastore.php?id=28&cid=28

20.07.2021 - 09:15

country flag Kolfinna wrote:

Hello! I have been trying to wrap my head around the instructions for the raglan increases but it's not clicking. Is it (yo, k, yo, k, yo, k, yo) with the first and last yo twisted in the next round? And what does k1 twisted mean? Thanks!

01.07.2021 - 05:26

DROPS Design answered:

Dear Kolfinna, in size L - XXXL increase for raglan starting 2 sts before the st with a marker: YO (work it into back loop on next round = no hole), K1, YO (work it in front loop on next round = hole), K1 twisted, K1 = marker, K1 twisted, YO (work it in front loop on next round = hole), K1, YO (work it into back of loop on next round = no hole). This video shows how to work a YO into front/back loop on next round, and this one shows how to knit a twisted stitch. Happy knitting!

01.07.2021 - 09:07

country flag Katherina wrote:

Hola, ante todo los felicito por este hermoso patrón, yo estoy tejiendo la talla S, los aumentos para el raglán me están quedando bien en el lado de las manga, pero en delantero y espalda siempre tengo el mismo num de puntos, no leo bien en el patrón donde van esos aumentos. Muchas gracias

09.04.2021 - 00:54

DROPS Design answered:

Hola Katherina, los aumentos se trabajan haciendo 1 hebra a cada lado del marcapuntos en la línea del raglán. Se hacen a la vez en la manga y el cuerpo, por lo que se aumenta tanto en el cuerpo como en las mangas.

11.04.2021 - 20:49