Marialouise wrote:
Waarom worden hierbij rondbreinaalden gebruikt? Kan het ook met "gewone" breinaalden?
27.06.2018 - 22:09DROPS Design answered:
Dag Marialouise, Ja, deze kan je inderdaad prima met rechte naalden breien.
01.07.2018 - 21:01Yvonne Thomsen wrote:
Hej, jeg forstår ikke rigtigt, at man skal slå op med 2 tråde? Kan det passe at man så skal sidde med to tråde til hver side, når man slår op??
05.06.2018 - 23:11DROPS Design answered:
Hej Yvonne, nej du lægger bare tråden dobbelt og slår op som du plejer, når du så strikker første pind, strikker du kun med én tråd. Du slår op med 2 tråd for at kanten ikke skal blive for stram. God fornøjelse!
06.06.2018 - 15:17Agata wrote:
Hi! Just wanted to ask before I start - for this pattern I need needle nr 9 that is 5,5mm or needle 9mm that is size 12 in Drops set?
27.03.2018 - 22:38DROPS Design answered:
Dear Agata, this pattern is worked with needle size 9 mm or US size 13. Happy knitting!
28.03.2018 - 15:31Agata wrote:
I'm beginner at knitting so excuse me if it's silly question - what's happening with second thread that we are starting with?
27.03.2018 - 22:37DROPS Design answered:
Dear Agata, just cut one of the threads and continue with only one thread. You will then just have to weave the cut yarn. Happy knitting!
28.03.2018 - 15:30Agata wrote:
Hi! Just wanted to ask before I start - for this pattern I need needle nr 9 that is 5,5mm or needle 9mm that is size 12 in Drops set?
27.03.2018 - 22:36Elin wrote:
Skal forstykke strikkes helt likt som bakstykke? Med tanke på fellinger.
13.02.2018 - 14:57DROPS Design answered:
Hei Elin, Ja, forstykke og bakstykke er strikket likt from til du skal felle til hals. God fornøyelse!
14.02.2018 - 06:23Coni wrote:
Hello! I am confused! Cast on with two strands but continue knitting with one? What's the purpose of this technique? What do I do with the strand left behind? Do you have a video that shows the transition from two to one strand? Please help!! Thank you! Coni.
06.01.2018 - 13:45DROPS Design answered:
Hi Coni, you use two strands to cast on with so that the cast-on edge is stretchy. When you have cast on you cut the one strand and fasten it well and continue with just the other one. Happy knitting!
07.01.2018 - 06:07Pierrette wrote:
I cannot figure out if front and back are the same length. I would like to have it as long in the back as it is in the front. Can you provide directions to work with. Thanks so much!
06.07.2017 - 00:01DROPS Design answered:
Dear Pirette, the original modell's front and back is the same length, so you can follow the directions of the pattern to get both the front and the back the same. I hope this helps. Happy Knitting!
06.07.2017 - 00:48Madeleine GUYAUX wrote:
Bonjour, J'aimerais savoir à quelle taille française correspond votre taille XXL. Merci d'avance pour votre réponse.
02.05.2017 - 09:48DROPS Design answered:
Bonjour Mme Guyaux, vous trouverez en bas de page un schéma avec les mesures pour chaque taille, comparez ces mesures à un vêtement similaire dont vous aimez la forme pour trouver votre taille. Plus d'infos ici. Bon tricot!
02.05.2017 - 13:25
Perly May |
||||
|
|
|||
Knitted DROPS jumper in garter st, stockinette st and vent in "Bomull-Lin" or "Paris". Size: S - XXXL.
DROPS 160-5 |
||||
GARTER ST (back and forth): K all rows. 1 ridge = K2 rows. DECREASE TIP: Dec 1 st at beg of row as follows: 1 edge st, slip next st as if to K, K 1, psso. Dec 1 st at end of row as follows: Work until 3 sts remain on needle, K the next 2 sts tog, 1 edge st. MEASURING TIP: Because of the ridges and the weight of the yarn all measurements must be done by holding the piece up otherwise the garment will be too long when worn. ---------------------------------------------------------- BACK PIECE: Worked back and forth on circular needle. LOOSELY cast on 54-58-64-70-76-82 sts on circular needle size 9 mm / US 13 with 2 strands Bomull-Lin or Paris. Then work ridges in GARTER ST - see explanation above, work only with 1 strand. REMEMBER THE KNITTING GAUGE When piece measures 18 cm / 7'' - READ MEASURING TIP, insert 1 marker in each side of piece (vent beg here). When piece measures 26 cm / 10 1/4'', dec 1 st in each side of piece - READ DECREASE TIP! Repeat dec in each side every 9 cm / 3½'' 1-1-2-2-2-2 more times = 50-54-58-64-70-76 sts. When piece measures 46-47-48-49-50-51 cm / 18''-18½''-19''-19¼''-19¾''-20'', bind off for armholes in each side of piece as follows: bind off 2 sts at the beg of the next 2 rows = 46-50-54-60-66-72 sts. When piece measures 62-64-66-68-70-72 cm / 24 3/8''-25¼''-26''-26¾''-27½''-28 3/8'' - REMEMBER MEASURING TIP, bind off the middle 16-16-16-18-18-18 sts for neck and finish each shoulder separately (= 15-17-19-21-24-27 sts remain on each shoulder). Dec 1 st on next row from RS towards the neck = 14-16-18-20-23-26 sts. LOOSELY bind off when piece measures 66-68-70-72-74-76 cm / 26''-26¾''-27½''-28 3/8''-29 1/8''-30''. FRONT PIECE: Cast on and work as back piece. When piece measures 56-58-59-61-62-64 cm / 22"-22 3/4"-23 1/4"-24"-24½"-25 1/4", bind off the middle 14-14-14-16-16-16 sts for neck and finish each shoulder separately (= 16-18-20-22-25-28 sts on each shoulder). Then dec at beg of every row from neck as follows: Dec 1 st 2 times = 14-16-18-20-23-26 sts. LOOSELY bind off when piece measures 66-68-70-72-74-76 cm / 26''-26¾''-27½''-28 3/8''-29 1/8''-30''. ASSEMBLY: Sew the shoulder seams. SLEEVE: Sleeve is worked top down. Pick up 44-46-48-50-52-54 sts (includes 1 edge st in each side) on circular needle size 9 mm / US 13 with Bomull-Lin or Paris - NOTE: Pick up in edge sts inside the 2 sts bind off for armholes in each side. Work stockinette st back and forth on circular needle. When piece measures 2 cm / 3/4'', insert 1 marker in each side - used for assembly of sleeve. When piece measures 5-4-5-4-5-3 cm / 2"-1½"-2"-1½"-2"-1", dec 1 st in each side of piece inside 1 edge st. Repeat dec every 3 cm / 1'' 8-8-7-7-6-6 more times = 26-28-32-34-38-40 sts. LOOSELY bind off sleeve piece measures 38-37-36-34-32-30 cm / 15"-14½"-14 1/4"-13½"-12½"-11 3/4" (shorter measurements in the larger sizes because of wider shoulders). ASSEMBLY: Sew the sleeve seams inside 1 edge st - NOTE: The 2 cm / 3/4'' worked back and forth before marker at the top of sleeve should fit the bind off for armhole. Sew side seam from armhole down to marker for vent, sew in outer loops of edge sts. |
||||
Diagram explanations |
||||
|
||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
Nghiem wrote:
Modèle très confortable
17.08.2018 - 10:03