DROPS Safran
DROPS Safran
100% Cotton
from 1.45 $ /50g
Get the yarn to make this pattern from 8.70$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Elly May

Crochet DROPS shorts with double crochet and lace pattern in ”Safran”. Size: S - XXL.

DROPS 162-19
DROPS design: Pattern no e-231
Yarn group A
----------------------------------------------------------
Size: S/M – L – XL/XXL

Materials:
DROPS SAFRAN from Garnstudio
300-350-350 g color no 17, white

DROPS CROCHET HOOK SIZE 2.5 mm/C – or size needed to get 26 dc x 16 rows with dc = 4'' x 4'' (10 x 10 cm).

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Safran
DROPS Safran
100% Cotton
from 1.45 $ /50g
Get the yarn to make this pattern from 8.70$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
CROCHET INFO:
Replace first sc at beg of every sc round with 1 ch. Finish round with 1 sl st in 1st ch at beg of round.
Replace first dc at beg of every dc round with 3 ch. Finish round with 1 sl st in 3rd ch at beg of round.

PATTERN:
See diagrams A.1 to A.3.

INCREASE TIP 1:
Inc 2 dc mid back as follows:
Work until 2 dc remain before marker mid back, work 2 dc in first dc, 1 dc in each of the next 2 dc (marker is between these) and 2 dc in next dc (= 2 dc inc).

Inc 4 dc mid back as follows:
Work until 4 dc remain before marker mid back, work 2 dc in first dc, 1 dc in next dc, 2 dc in next dc, 1 dc each of the next 2 dc (marker is between these) and 2 dc in next dc, 1 dc in next dc, 2 dc in next dc (= 4 dc inc).

INCREASE TIP 2:
Work until 1 dc remains before marker in the side, work 2 dc in first dc, 1 dc in next dc (marker is in this dc) and 2 dc in next dc (= 2 dc inc). Repeat the same inc in the other side = 4 sts inc on round.
----------------------------------------------------------

SHORTS:
The piece is worked top down.
Work 224-274-326 ch on hook size 2.5 mm / C with Safran and form a ring with 1 sl st in first ch. Insert 1 marker at beg of round = mid back.
Work first round as follows: ch 1, * skip ch 1, 1 sc in each of the next 7 ch *, repeat from *-* until 0-2-6 ch remain, work 1 sc in each of these ch = 196-240-286 sc.
READ CROCHET TIP! Continue working 1 sc in every sc until piece measures 2 cm / 3/4''. REMEMBER THE CROCHET GAUGE!
Now work an eyelet row as follows: ch 4, skip 1 sc, * 1 dc in next sc, ch 1, skip 1 sc *, repeat from *-* the entire round, finish with 1 sl st in 3rd ch from beg of round. On next round work 1 sc in every dc and every ch.
Then work the shorts higher in the back as follows: Work 11-12-13 sc past the marker mid back, turn and work 1 sl st in first st, then 1 sc in each of the next 21-23-25 sc, turn and work 1 sl st in first st, then 1 sc in each of the next 32-35-38 sts (sl sts are also worked). Continue like this by working 11-12-13 sts more on every turn until a total of 154-192-208 sts have been worked. Turn again and work until marker mid back.
Continue to work 1 round with sc while AT THE SAME TIME inc 28-16-2 sc evenly = 224-256-288 sc. Then work pattern (and insert markers) as follows from mid back: 3 dc, A.1 (= 3 dc), * 5 dc, A.1*, repeat from *-* until 2 dc remain, 2 dc, AT THE SAME TIME insert a marker in each side as follows: Insert a marker in the 3rd dc after 7th-8th-9th repetition A.1, and insert a marker in 3rd dc after 21th-24th-27th repetition with A.1 (i.e. 1 marker in each side). When A.1 has been worked 1 time vertically, continue pattern A.1X - AT THE SAME TIME inc mid back and in the sides as follows:

SIDES:
Inc on each side of dc with marker, in each side as follows - READ INCREASE TIP 2. Repeat inc every 4th round 7-7-8 times in total = 28-28-32 dc inc.

MID BACK:
AT THE SAME TIME when piece measures 15-17-19 cm / 6"-6 3/4"-7½" (measured mid front), inc mid back as follows – Read INCREASE TIP-1. Repeat inc with 2 dc mid back every round 10 times in total, and repeat inc with 4 dc every round 2-2-3 times = 28-28-32 dc inc.

There are now 280-312-352 dc on round. Now piece measures approx. 22-24-27 cm / 8¾''-9½''-10½'' mid front and 27-29-32 cm / 10½"-11½"-12½" mid back. Now divide for legs as follows: Work 1 sl st in each of the first 5-6-6 dc on round, turn and work 1 dc in each of the first 10-12-12 dc (i.e. 5-6-6 sts on each side of marker mid back). These 10-12-12 dc = gusset. Work dc back and forth over these dc. When piece measures 4-5-6 cm / 1½''-2''-2½'', dec 1 dc in each side, repeat dec when piece measures 8-9-10 cm / 3"-3½"-4'' = 6-8-8 dc. Continue with 1 dc in every dc until gusset measures 11-12-13 cm / 4½"-4 3/4"-5", cut the yarn. Fasten gusset edge to edge to the middle 6-8-8 sts towards mid front. Then work the legs.


LEG:
Work 1 dc in each of the 132-146-166 dc around one leg (i.e. work 1 dc in every dc in A.1X and 1 dc in ch-space = 3 dc), in addition work 28-31-34 dc along the gusset = 160-177-200 dc. Work 2 rounds with dc AT THE SAME TIME on last round inc 0-3-0 dc evenly by working 2 dc in 1 dc = 160-180-200 dc.

Continue to work as follows:
ROUND 1: 3 ch (= 1 dc), * ch 1, skip 1 dc, 1 dc in next dc * , repeat from *-* until 1 dc remains, ch 1, skip 1 dc, 1 sl st in 3rd ch at beg of round.
ROUND 2: 3 ch (= 1 dc), * 1 dc in ch-space, 1 dc in next dc *, repeat from *-* the entire round until 1 ch-space remains, 1 dc in ch-space, finish with 1 sl st in 3rd ch on round.
ROUND 3: Now work pattern as follows: Work pattern according to diagram A.2 over the first 10 dc, continue with A.3 the entire round. Finish every round with 1 sl st at beg of round. REMEMBER CROCHET INFO! Continue like this until pattern A.2-A.3 have been worked vertically. Fasten off. Work the other leg the same way.


TIES:
Work 130-140-150 cm / 51"-55"-60" with LOOSE ch, turn and work 1 sl st in every ch. Thread the tie in the row with eyelet holes at the top of shorts – start mid front.

This pattern has been corrected.

Updated online: 16.02.2015
Edited info on where to place markers each side.
Updated online: 01.06.2015
under SHORTS (...until 2 sc remain, 2 dc..., NOT, ...until 2 dc remain, 2 dc...):

....Then work pattern (and insert markers) as follows from mid back: 3 dc, A.1 (= 3 dc), * 5 dc, A.1*, repeat from *-* until 2 sc remain, 2 dc, AT THE SAME TIME insert a marker in each side as follows:..
Updated online: 03.06.2015
Correction: SHORTS:
The piece is worked top down. Work 224-274-326 ch on hook size 2,5 mm/C with Safran and form a ring with 1 sl st in first ch. Insert 1 marker at beg of round = mid back.
Updated online: 07.05.2019
Correction: Diagram A.1 has been edited to A.1 and A.1X "When A.1 has been worked 1 time vertically, continue with pattern A.1X"

Diagram

All measurements in charts are in cm.

symbols = dc around ch-space (1st round= dc in dc)
symbols = sc in dc
symbols = ch
symbols = 7 ch
symbols = sc around ch-space
symbols = sl st in ch
symbols = 1st round beg here
symbols = Work 1 dc but wait with last pull through, work 1 dc more in same dc. On last pull through, pull yarn through all YOs on hook
symbols = tr
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Elly May

Dagmar, Germany

Elly May

Hanna, Poland

162-19 Elly May

joywiths, United Kingdom

Elly May

A1001stitches, United Kingdom

Post a comment to pattern DROPS 162-19

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (157)

country flag Michelle wrote:

Hi im new to these kind of patterns and finding reading them difficult I have tried watching the video for A1 but still not sure what im doing it says tr but it looks like she is doing dc and also is she going in every stitch or missing some out. Many thanks Michelle

27.05.2019 - 20:45

DROPS Design answered:

Dear Michelle, make first sure to choose the correct language scrolling down the menu under the picture and choosing UK- or US-English terminology. Happy crocheting!

28.05.2019 - 09:12

country flag Karin wrote:

Jag har en fråga, efter nedanstående, ska jag göra ett varv med stolpar innan? Det blir liksom så konstigt att göra nedanstående i fasta maskor!? “Sedan virkas det mönster (och sätts markörer) så här från mitt bak: 3 st, A.1 (= motsvarar 3 st), * 5 st, A.1*, upprepa *“ Vänligen Karin

07.05.2019 - 06:49

DROPS Design answered:

Hei Karin. Første gang du hekler A.1 skal du hekle hele digrammet, altså inkludert den første raden med staver som ikke er innenfor klammene. Vi skal få rettet dette i oppskriften. Takk for beskjed og god fornøyelse.

07.05.2019 - 10:20

country flag Tine Ploug wrote:

Hej jeg forstår ikke hvorfor målet på 1 til 3 r er 71 cm langt når jeg følger opskriften med samme garn og nål 2, 50 str L de bliver jo alt for store så.

25.03.2019 - 19:50

DROPS Design answered:

Hei Tine. Jeg er usikker på om jeg skjønner hvilke mål du referer til? Du sier du hekler med samme garn og heklenål som i oppskriften, men har du kontrollert at heklefastheten din stemmer overens? du skal ha 26 masker i bredden på 10 cm, om du har en annen heklefasthet kan dette påvirke målene på plagget. Du finner lengden og bredden på shortsen nederst i oppskriften, og disse målene stemmer overens med heklefastheten, det har vi nå kontrollert. God fornøyelse

02.04.2019 - 10:10

country flag Vanessa wrote:

Hello. please could you help again. with the increase mid back i'm not sure where to put the 2trb increase and the 4trb increase. the pattern states EVERY ROW for both increases. so am increasing 6 stitches in the first two rows? the increases for the 4trb fall into the A1 pattern so am i to make 2 trebles instead of the 2trbl together? and if i'm doing both increases (the 2trb and the 4trb) on each row i would have 4 stitches in the stitch after the marker - please clarify. thank you

15.02.2019 - 11:29

DROPS Design answered:

Dear Vanessa, you need to increase first 2 trebles on mid back then 4 trebles, if your increases fall into the A.1 pattern, crochet the increases without A.1, just with trebles. If you skip the increases, the piece will not get the correct width. Happy crocheting!

15.02.2019 - 15:48

country flag Vanessa wrote:

Hi - I want to make sure i am following the pattern correctly. The 5 treble A1 pattern is causing the rows to be wavy (as if there are too many stitches for the row) whereas looking at the picture and the video it is flat (against the body) . i've started with 3 trb, A1 and then repeating 5 treble and A1. about to start row 4 which is an increase row, and the rows are going to become even more wavy with the extra stitches. should it be wavy or sit flat? Thanks

12.02.2019 - 20:27

DROPS Design answered:

Dear Vanessa, when you work first row in A.1 *skip next st, then work 2 tr tog, 1 ch, 2 tr tog in the same st, skip next st*, so that there are 3 sts over the 3 sts from previous row. On next row in A.1 work the 2 tr tog, 1 ch, 2 tr tog around the chain from previous row. Happy crocheting!

13.02.2019 - 09:07

country flag Monico wrote:

Mais si je fais comme vous venez de me le dire diagramme A1 entre chaque A1 je n'aurais plus mes 5 brides car, si je saute 1 bride avant et après les 2 brides coulées et la ml, il ne me restera plus que 4 brides même si je crée 3 mailles avec les 2X2 brides coulées et la ml cela ne me recrée pas de bride pour remplacer la bride sautée……. Explications !!!!!!

03.12.2018 - 14:50

DROPS Design answered:

Bonjour Mme Monico, le diagramme A.1 se crochète sur 3 mailles comme le montre le diagramme: au 1er rang, on saute une maille, dans la maille suivante, on a 2 b écoulées, ens, 1 ml, 2 b écoulées ensemble, on saute la m suivante et on passe aux instructions suivantes (par ex: 1 bride dans chacune des 5 brides suivantes). Au rang suivant, on crochète les 2 b écoulées ens, 1 ml 2 b écoulées ens autour de la ml et on continue 1 bride dans chacune des 5 b suivantes dans cet exemple. Bon crochet!

03.12.2018 - 16:11

country flag Monico wrote:

Je viens de visionner votre vidéo du 3/3/2016 concernant le diagramme A1 et ainsi j'ai pu obtenir la réponse à ma question. Merci Bcq

02.12.2018 - 14:43

country flag Monico wrote:

En ce qui concerne le diagramme A1 faut-il sauter une bride avant et après les 2B, MS,2B ? Car si je continue ainsi, entre 2 motifs du diagramme A1 il y a, non plus 5 B mais 7 B…… Pourriez vous m'expliquer. Merci

02.12.2018 - 13:22

DROPS Design answered:

Bonjour Mme Monico, au 1er rang de A.1 vous crochetez ainsi: sautez 1 bride, dans la bride suivante crochetez: 2 brides écoulées ensemble (= 1 maille), 1 ml, 2 brides écoulées ensemble, sautez 1 bride (= 3 mailles au total au-dessus de 3 mailles). Au rang suivant de A.1, crochetez autour de la ml du 1er rang: 2 brides écoulées ensemble, 1 ml, 2 brides écoulées ensemble. Bon crochet!

03.12.2018 - 09:41

country flag Pinceau à Bille wrote:

Désolée, mes commentaires n'étaient pas pour ce modèle :(

06.08.2018 - 19:20

country flag Pinceau à Bille wrote:

Pour le lien, lire 230 mailles au lieu de 130 ;)

05.08.2018 - 15:42

DROPS Design answered:

Bonjour Pinceau à Bille, pour le lien, on crochète une chaînette de 130 cm (pas de 130m) :) Bon crochet!

06.08.2018 - 09:56