DROPS / 161 / 31

Nautical Waves by DROPS Design

Knitted DROPS jumper with lace pattern and stripes in ”Cotton Light”. Size: S - XXXL.

DROPS design: Pattern no cl-045
Yarn group B
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Finished measurements:
Bust: 94-108-112-128-138-156 cm / 37"-42½"-44"-50½"-54 1/4"-61"
Full length: 60-62-64-66-68-70 cm / 23 5/8''-24 3/8''-25¼''-26''-26¾''-27½''

Materials:
DROPS COTTON LIGHT from Garnstudio
450-500-550-600-650-700 g color no 01, off white
100-100-150-150-150-150 g color no 26, denim blue

DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (80 cm / 32'') SIZE 4.5 mm/US 7 - or size needed to get 21 sts x 28 rows in stockinette st = 4'' x 4'' (10 x 10 cm).
DROPS DOUBLE POINTED NEEDLES and CIRCULAR NEEDLE (40 and 80 cm / 16'' and 32'') SIZE 4 mm/US 6 - for edge in garter st.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (51)

50% Cotton, 50% Polyester
from 2.20 $ /50g
DROPS Cotton Light uni colour DROPS Cotton Light uni colour 2.20 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 24.20$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

GARTER ST (worked in the round):
* K 1 round and P 1 round *, repeat from *-*. 1 ridge = 2 rounds.

PATTERN:
See diagrams A.1-A.16. The diagrams show all rows in pattern seen from RS.

KNITTING TIP:
K 5 twisted tog as follows: K 5, pass next to last st worked over the last so that this st is around the last st, repeat until all 4 sts have been passed over (= 4 sts dec).
K 5 tog as follows: K 5, pass them back on left needle, pass the next to last st over the last so that this st is around the last st, repeat until all 4 sts have been passed over (= 4 sts dec), pass the last st worked back on right needle.

INCREASE TIP:
Work until 1 st remains before marker, 1 YO, K 2 (marker is in the middle of these), 1 YO = 2 sts inc. On next round K YO twisted to avoid holes.
----------------------------------------------------------

BODY:
Worked in the round on circular needle.
Cast on 273-315-336-378-399-462 sts on circular needle size 4 mm / US 6 with off white. Work 1 ridge in GARTER ST - see explanation above. Switch to circular needle size 4.5 mm / US 7. Work A.1 (= 21 sts) 13-15-16-18-19-22 times in total. After A.1, there are 221-255-272-306-323-374 sts on needle. Then work A.2 (= 17 sts) over A.1. Repeat A.2 2-2-2-3-3-3 times in total vertically. Work A.3 over A.2. After first round of A.3, there are 195-225-240-270-285-330 sts on needle. On last round in A.3 (see star in diagram) dec or inc differently in the different sizes:
Size S and XXL:
Inc 4 sts evenly = 199-289 sts.
Size M-L-XL-XXXL:
Dec 2-5-5-5 sts evenly = 223-235-265-325 sts.
REMEMBER THE KNITTING GAUGE Then work as follows: A.4 (= 6 sts) 33-37-39-44-48-54 times in total, finish with 1st sts in the diagram. Repeat A.4 3-3-3-3-4-4 times in total vertically. Then work A.5 1 time vertically. On last round in A.5 (see star in diagram), dec 3-3-1-1-3-5 sts evenly = 196-220-234-264-286-320 sts.
After last round in A.5 continue as follows: 4-10-6-6-4-5 sts in stockinette st, A.6 6-6-7-8-9-10 times in width, 8-20-12-12-8-10 sts in stockinette st, A.6 6-6-7-8-9-10 times in width, 4-10-6-6-4-5 sts in stockinette st. NOTE: P the sts in stockinette st in the sides when working P in A.6. After A.6, there are 220-244-262-296-322-360 sts on needle. Work A.2 over A.6, P the sts in stockinette st when working P in A.2. Repeat A.2 5-5-6-5-5-6 times in total vertically. AT THE SAME TIME when piece measures 44-45-46-47-48-49 cm / 17 1/4''-17 3/4''-18''-18½''-19''-19 1/4'', bind off for armhole as follows: bind off the first 2-3-1-2-2-2 sts, 2-7-5-4-2-3 sts in stockinette st, A.2 6-6-7-8-9-10 times in width as before, 2-7-5-4-2-3 sts in stockinette st, bind off the next 4-6-2-4-4-4 sts, 2-7-5-4-2-3 sts in stockinette st, A.2 6-6-7-8-9-10 times in width as before, 2-7-5-4-2-3 sts in stockinette st, bind off the last 2-3-1-2-2-2 sts = 106-116-129-144-157-176 sts on front piece and 106-116-129-144-157-176 sts on back piece. Now finish each part separately. Fasten off.

BACK PIECE:
= 106-116-127-144-157-176 sts. When A.2 has been worked 5-5-6-5-5-6 times vertically, work A.3 over A.2. When A.3 has been worked 1 time vertically, there are 94-104-115-128-139-156 sts on needle. Then work as follows from RS: 2-1-5-1-2-3 sts in stockinette st, A.4 6-7-7-9-9-11 times in total, 18-18-21-18-27-18 sts in stockinette st, A.13 6-7-7-9-9-11 times in total, 2-1-5-1-2-3 sts in stockinette st.
When the first 4 rows of A.4/A.13 have been worked, slip the middle 12-12-13-14-15-16 sts on a stitch holder for neck and finish each shoulder separately (= 41-46-51-57-62-70 sts). Continue to bind off for neck on every row from neck as follows: bind off 3 sts 1 time, 2 sts 2 times, 1 st 4-4-5-4-5-4 times = 30-35-39-46-50-59 sts remain for shoulder.
When A.4/A.13 have been worked 1 time vertically, work piece in off white and stockinette st until finished measurements. Work 1 ridge over all sts when piece measures 59-61-63-65-67-69 cm / 23¼''-24''-24¾''-25½''-26 3/8''-27 1/8''. Bind off. Work the other shoulder the same way.

FRONT PIECE:
Work as on back piece.

SLEEVE:
Worked in the round on double pointed needles. Cast on 63-63-63-69-69-69 sts on double pointed needle size 4 mm / US 6 with off white. Work 1 ridge in GARTER ST - see explanation above. Insert 1 marker at the beg of the round. Switch to double pointed needles size 4.5 mm / US 7. Work A.14 (= 3 times in width) – see diagram for correct size. Work A.15 over A.14 5 times in total. Then work A.16 over A.15. When A.16 has been worked 1 time vertically, there are 45-45-45-51-51-51 sts on needle. Then work as follows: K 2, A.13 7-7-7-8-8-8 times in total in width, finish with K 1. AT THE SAME TIME when piece measures 12-10-10-10-10-10 cm / 4'', inc 1 st on each side of marker – see INCREASE TIP. Repeat inc every 3½-3-2½-2½-2-1½ cm / 1 1/4"-1 1/8"-7/8"-7/8"-3/4"-½" 10-12-14-13-16-18 more times = 67-71-75-79-85-89 sts. When A.13 has been worked 1 time vertically, work piece in off white and stockinette st until finished measurements. Bind off when piece measures 51-49-48-46-44-42 cm / 20"-19 1/4"-19"-18"-17 1/4"-16½" (shorter measurements in the larger sizes because of longer sleeve cap and wider shoulders). Make another sleeve the same way.

ASSEMBLY:
Sew the shoulder seam. Sew in the sleeves inside 1 edge st.

NECK EDGE:
Work piece in the round on circular needle size 4 mm / US 6 with off white, pick up 100-120 sts around the entire neck incl sts from stitch holders. Work 2 ridges. Bind off.

This pattern has been corrected. .

Correction: Small correction in Knitting tip.
Updated online: 04.06.2015

Diagram

All measurements in charts are in cm.

= K from RS, P from WS with off white
= K from RS, P from WS with denim blue
= K from WS, P from RS with off white
= K 5 tog - READ KNITTING TIP in pattern
= K 5 twisted tog - READ KNITTING TIP in pattern
= K 2 tog
= slip 1 st as if to K, K 1, psso
= 1 YO between 2 sts, do not K YO twisted on next row, it should make hole
= 1 YO between 2 sts, K YO twisted on next row, it should not make hole
= K 3 tog
= K 3 twisted tog
= inc/dec row - see pattern




Comments (51)

Leave your comment!

Ute 30.06.2018 - 22:21:

Hallo, ist es eigentlich egal in welchem Abstand ich den Farbwechsel mache? Ich finde nämlich nirgendwo eine Angabe dazu.

DROPS Design 02.07.2018 kl. 09:50:

Liebe Ute, die verschiedenen Streifen sind bei den Diagrammen gezeight, dh (siehe 1. , 2. und 3. Symbol unter Diagramtext). Viel Spaß beim stricken!

Vesla Larsen€ 30.04.2018 - 15:53:

Hvordan lager man en størrelse mindre enn S?€

DROPS Design 04.05.2018 kl. 12:23:

Hej, Vi kan desværre ikke hjælpe dig med at skrive opskriften om, men hvis du prøver selv, så skal du sørge for at maskeantallet går op det det antal du skal bruge til diagrammerne. God fornøjelse!

Surin Sabine 21.01.2018 - 14:04:

Bonjour, je suis arrivée aux vagues en dessous des manches , taille L 2, 262 mailles et je dois faire le dessin sur 17 mailles (17×15=255 reste 7 mailles) suis pas juste ... incompréhension aidez moi svp merci

DROPS Design 22.01.2018 kl. 10:03:

Bonjour Mme Surin, quand vous avez tricotez A.6, vous avez 2 fois 7 motifs de A.6 (avec des mailles jersey en début de rang, entre les 2 séries de A.6 et en fin de rang), A.6 se tricote sur 119 m. Tricotez ensuite A.2 au lieu de A.6 (= A.2 = 17 m au 1er rang), répétez ainsi 7 fois A.2 en largeur, au lieu des 7 fois A.6 (avec toujours les mailles jersey en début de rang, entre les 2 séries du diagramme et en fin de rang). Bon tricot!

Barbara 07.09.2017 - 22:21:

Hola. En la primera vuelta de A.3 van todos los puntos en azul denim? Gracias

DROPS Design 11.09.2017 kl. 23:59:

Hola Barbara. La primera fila de A.3 se trabaja con azul denim.

Elly 20.03.2017 - 14:06:

Voor deze trui gebruik ik rondbreinaalden. Dit doe ik voor het eerst. Nu vraag ik me af of er een handige manier is om de losse draden (na de kleurwisseling) weg te werken. Bij 'gewone' pennen 'weef' ik de draad aan de zijkant mee en hoef ik dus weinig af te hechten. Is er ook een dergelijke manier bij rondbreien?

DROPS Design 20.03.2017 kl. 15:51:

Hoi Elly. Je kan de draad mee naar boven laten volgen en even draaien aan het begin van de nld. Maar ikzelf knip de draad af en breit de draad mee aan de achterkant - zoals bij fair-isle. Zie bijvoorbeeld deze video

Beate 13.07.2016 - 09:00:

Danke Anton. Jetzt weiss ich wo mein Fehler ist.

Beate 12.07.2016 - 14:43:

Hallo, wenn ich in Runde stricke und die Rückreihen dann links stricke bekomme ich kraus rechts.Was mache ich falsch?

Anton 12.07.2016 kl. 17:19:

Hallo Beate! In Runden gibt es keine Rückreihen.

Monica 05.06.2016 - 22:08:

Buongiorno. Ho acquistato il filato e vorrei realizzare questa maglia senza ferri circolari. Non capisco pero' una cosa: la spiegazione del "dietro". Devo avviare 129 m. (taglia L) e cominciare subito con il motivo A2? O cominciare con A1 come descritto per i ferri circolari? Grazie!

DROPS Design 05.06.2016 kl. 22:16:

Buongiorno Monica. Per lavorare in parti separate, per il dietro avvia la metà delle m indicate, quindi 168 m (consigliamo di aggiungere una m vivagno ai lati). Lavora poi il diag.A1 su queste m e poi lavora il diagramma A2. Deve iniziare con le indicazioni riportate nella sezione corpo, dimezzando il numero di m: in questa sezione trova le indicazioni per lavorare fino agli scalfi. Sotto il paragrafo Dietro, trova le indicazioni dallo scalfo in avanti. Buon lavoro!

Monica 05.06.2016 - 22:05:

Buongiorno. Ho acquistato il filato e vorrei realizzare questa maglia senza ferri circolari. Non capisco pero' una cosa: la spiegazione del "dietro". Devo avviare 129 m. (taglia L) e cominciare subito con il motivo A2? O cominciare con A1 come descritto per i ferri circolari? Grazie!

DROPS Design 05.06.2016 kl. 22:15:

Buongiorno Monica. Per lavorare in parti separate, per il dietro avvia la metà delle m indicate, quindi 168 m (consigliamo di aggiungere una m vivagno ai lati). Lavora poi il diag.A1 su queste m e poi lavora il diagramma A2. Deve iniziare con le indicazioni riportate nella sezione corpo, dimezzando il numero di m: in questa sezione trova le indicazioni per lavorare fino agli scalfi. Sotto il paragrafo Dietro, trova le indicazioni dallo scalfo in avanti. Buon lavoro!

Priscilla Bouring 06.05.2016 - 09:45:

Bonjour, je suis relativement novice et vient de commencer mon tricot. Mais je bute déjà devant le A1!!! Je ne comprends pas le 3e et 4e rang de A1. Si je fais 8 diminutions et 8 jetés, à priori je retombe sur mes pieds. Mais d'après les explications, il ne faut pas tricoter le jeté, donc je n'ai plus mes 17 mailles au rang 4, mais seulement 9! est-ce que j'ai mal compris le schéma, ou y a-t-il une erreur quelque part? Merci pour votre aide précieuse:)

DROPS Design 06.05.2016 kl. 10:09:

Bonjour Mme Bouring, le jeté du 3ème rang de A.1 ne se tricote pas torse pour former un jour, c'est-à-dire qu'on va le tricoter "normalement" dans le brin avant au rang/tour suivant. Votre nombre de mailles doit effectivement toujours rester le même dans chaque motif. Bon tricot!

Post a comment to pattern DROPS 161-31

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.