DROPS / 161 / 29

Morning Breeze by DROPS Design

Knitted DROPS jumper in garter st with lace pattern in ”Paris”. Size: S - XXXL.

Tags: lace, sweaters,

DROPS design: Pattern no w-541
Yarn group C or A + A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Finished measurements:
Bust: 102-106-112-122-134-144 cm / 40"-41 3/4"-44"-48"-52 3/4"-56½"
Full length: 58-60-62-64-66-68 cm / 22¾''-23 5/8''-24 3/8''-25¼''-26''-26¾''

Materials:
DROPS PARIS from Garnstudio
700-750-850-900-1000-1100 g color no 100, light wash

DROPS CIRCULAR NEEDLE (40 and 60 or 80 cm / 16 and 24'' or 32'') SIZE 6 mm/US 10 - or size needed to get 15 sts x 29 rows in garter st = 4'' x 4'' (10 x 10 cm).

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (42)

100% Cotton
from 1.80 $ /50g
DROPS Paris uni colour DROPS Paris uni colour 2.20 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Paris recycled denim DROPS Paris recycled denim 1.80 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 25.20$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth):
K all rows. 1 ridge = K2 rows.

GARTER ST (worked in the round):
* K 1 round and P 1 round *, repeat from *-*. 1 ridge = 2 rounds.

PATTERN:
See diagram A.1. Diagram shows all rows seen from RS.

DECREASE TIP (applies to sleeve):
All dec are done from RS.
Dec 1 st in each side of piece by K 2 tog inside 1 edge st in each side of piece.
----------------------------------------------------------

JUMPER:
Back piece is long than front piece.

BACK PIECE:
Worked back and forth on circular needle. Cast on 76-80-84-92-100-108 sts on circular needle size 6 mm / US 10 with Paris. Work 5 ridges in GARTER ST - see explanation above. Then work A.1 with 2 sts in garter st in each side of piece. When it has been worked up to arrow in diagram A.1, cast on 1 new st in each side of piece (= edge st) = 78-82-86-94-102-110 sts. Work edge sts in garter st until finished measurements. REMEMBER THE KNITTING GAUGE Continue with A.1 and 1 edge st in garter st in each side of piece until finished measurements. When piece measures approx. 52-53-54-55-56-57 cm / 20½''-21''-21¼''-21 5/8''-22''-22½'', bind off for armholes at the beg of the next 2 rows in each side of piece as follows: bind off 4-4-4-6-8-8 sts 1 time = 70-74-78-82-86-94 sts. Continue with pattern with 1 edge st in garter st in each side until piece measures 55-57-59-61-63-65 cm / 21 5/8''-22½''-23¼''-24''-24¾''-25½'' - adjust after 2 ridges. Now slip the middle 26-26-26-28-28-28 sts on a stitch holder for neck and finish each shoulder separately (= 22-24-26-27-29-33 sts). On next row from the neck, bind off 1 st = 21-23-25-26-28-32 sts remain on shoulder. Bind off when piece measures approx. 65-67-69-71-73-75 cm / 25½"-26½"-27"-28"-28 3/4"-29½" - adjust after 2 ridges. Work the other shoulder the same way.

FRONT PIECE:
Cast on 78-82-86-94-102-110 sts (includes 1 edge st in each side). Work 4 ridges. Then work A.1 and 1 edge st in garter st in each side of piece until finished measurements. When piece measures 42-43-44-45-46-47 cm / 16½''-17''-17¼''-17¾''-18''-18½'', bind off for armholes in each side as on back piece. When piece measures 48-50-52-54-56-58 cm / 19''-19¾''-20½''-21¼''-22''-22¾'', dec for neck as follows: Slip the middle 14-14-14-16-16-16 sts on a stitch holder for neck and finish each shoulder separately (= 28-30-32-33-35-39 sts). Then bind off on every row from neck as follows: 3 sts 1 time, 2 sts 1 time and 1 st 2 times = 21-23-25-26-28-32 sts remain on shoulder. Bind off when piece measures approx. 58-60-62-64-66-68 cm / 22¾''-23 5/8''-24 3/8''-25¼''-26''-26¾'' (adjust pattern with back piece). Work the other shoulder the same way.

NECK EDGE:
Worked in the round on circular needle. Pick up 70-85 sts (includes sts on stitch holders) on circular needle size 6 mm / US 10 with Paris Work 2 ridges in GARTER ST - see explanation above. Bind off.

SLEEVE:
Worked back and forth on circular needle, top down.
Cast on 50-52-56-58-62-66 sts (includes 1 edge st in each side) with Paris. Work 5 ridges. Then work A.1 with 1 edge st in garter st in each side of piece. When piece measures 3 cm / 1'', dec 1 st in each side inside 1 edge st - READ DECREASE TIP. Repeat dec every 6-5½-4½-4-4-3 cm / 2½"-2 1/4"-1 3/4"-1½"-1½"-1" 6-7-8-8-9-11 more times = 36-36-38-40-42-42 sts. Then work piece in garter st. Bind off when piece measures 49-49-48-47-46-44 cm / 19 1/4"-19 1/4"-19"-18½"-18"-17 1/4" (shorter measurements in the larger sizes because of wider shoulders). Make another sleeve.

ASSEMBLY:
Sew shoulder seams in outer loops of edge sts, sew in sleeves, sew underarm and side seams in one down to where edge sts were cast on on back piece.

This pattern has been corrected. .

Updated online: 19.06.2015
Back: ... Bind off when piece measures approx. 65-67-69-71-73-75 cm / 25½\"-26½\"-27\"-28\"-28 3/4\"-29½\" - adjust after 2 ridges.

Diagram

All measurements in charts are in cm.

= K from RS
= K from WS
= K 2 tog, 1 YO
= 1 YO, slip 1 st as if to K, K 1, psso
= see pattern


Truchet Maria Angela 14.05.2019 - 18:40:

Quisiera sacar el modelo imprimir laa foto pero no me deja

Eva 17.05.2018 - 22:44:

Ahoj, u schématu ve třetím řádku je: “1 oka spleteme hladce” - asi patří 2 oka, že? Děkuji

DROPS Design 18.05.2018 kl. 17:05:

Milá Evo, díky za upozornění - ano, 2 oka spleteme hladce. Opraveno :-) Příjemné pletení! Hana

Helene Joosten 25.01.2018 - 16:44:

Hoi, ik brei nu het achterpand en volgens mij klopt er niets van. Als je alles uitrekent zijn de armsgaten 16 cm hoog , wel erg krap(maat xl) en begint na 6cm breien na het afkanten voor de armsgaten het afkanten voor de hals al, terwijl dat maar 2 naalden betreft als je het patroon lees. Op welke hoogte moet ik nu de hals voor het achterpand afkanten. (zie deze vraag ook al in 2015 waar gesteld wordt dat het patroon goed is, dat is dus niet zo, lees en tel)

DROPS Design 06.02.2018 kl. 15:24:

Hallo Helene, Het patroon heeft een vrij lage hals achter en de armsgaten zijn zo smal omdat de mouwen laag zijn ingezet.

Melissa 30.11.2016 - 12:51:

E continuo con lo schema A1? Inizio direttamente con 1m gettata ecc..?

DROPS Design 30.11.2016 kl. 14:16:

Buongiorno Melissa. Quando il ferro inizia con 1 m gettata, non fa la gettata e lavora le prime 2 m a dir. Buon lavoro!

Melissa 30.11.2016 - 12:10:

Buongiorno, dopo aver messo in attesa le 26 m centrali e aver intrecciato 1m come proseguo? Ripeto lo schema A1 su ogni spalla ma quanti vivagni devo fare? 2 per spalla (cioè 1 vicino allo scollo e 1 vicino alla manica)? Grazie

DROPS Design 30.11.2016 kl. 12:22:

Buongiorno Melissa, non deve fare il vivagno verso lo scollo perchè le m saranno riprese per fare il collo. Buon lavoro!

Melissa 24.11.2016 - 21:41:

Scusate, altra domanda: dopo aver aggiunto una m di vivagno per lato continuo a lavorare 2m a legaccio prima e dopo lo schema A1? Cioè 3m diritto, schema A1, 3m diritto? Grazie

DROPS Design 24.11.2016 kl. 21:52:

Buonasera Melissa. Dopo aver aggiunto la m vivagno, lavora 1 sola m vivagno all'inizio e alla fine del ferro (quindi 1 m a dir e non 3); le altre m vanno lavorate seguendo A.1. Buon lavoro!

Melissa 23.11.2016 - 17:30:

Buonasera, non mi è chiaro come inserire il diagramma A1: 2m legaccio, A1 fino a che non restano 2m, 2 m legaccio...è corretto? Praticamente viene una maglia rasata per i primi 4 ferri dello schema (escluse le 4 m legaccio)? Grazie

DROPS Design 23.11.2016 kl. 17:34:

Buongiorno Melissa. E' corretta la disposizione del diag. A1. Le m del diag. A1 vengono però lavorate a dir sul diritto del lavoro e a dir sul rovescio del lavoro. Quindi il risultato è maglia legaccio sui primi 4 ferri del diag e non maglia rasata. Buon lavoro!

Melissa 23.11.2016 - 17:02:

Buonasera, non mi è chiaro come inserire il diagramma A1: 2m legaccio, A1 fino a che non restano 2m, 2 m legaccio...è corretto? Praticamente viene una maglia rasata per i primi 4 ferri dello schema (escluse le 4 m legaccio)? Grazie

DROPS Design 23.11.2016 kl. 17:16:

Buongiorno Melissa. E' corretta la disposizione del diag. A1. Le m del diag. A1 vengono però lavorate a dir sul diritto del lavoro e a dir sul rovescio del lavoro. Quindi il risultato è maglia legaccio sui primi 4 ferri del diag e non maglia rasata. Buon lavoro!

Rita 27.09.2016 - 18:44:

Hei! strikker genseren i str. Medium i Big Merino og er ferdig med bakstykket. Det ser helt merkelig ut. Kan dere hjelpe meg med det som ser ut som en feil i oppskriften: Det skal felles til arm etter 53 cm og felles av etter total lengde 67cm. Dette må da være 10 cm for kort ermehull? Det ser også merkelig ut med felling til nakke ved 57 cm. Det blir jo 10 cm hull i nakken. Hva er riktig? Kommer det rettelser i oppskriften? takk for svar :-)

Susanne 15.09.2016 - 09:52:

Jeg har samme spørgmål som Jasmin fra Tyskland 18.3.15 Hvorfor er det ikke rettet. ???

DROPS Design 15.09.2016 kl. 12:05:

Hej Susanne. Nu er mit tyske ikke perfekt :) Men enten er det ikke godkendt som fejl, det er den som er rettet 19/6/2015 eller saa maa du lige forklare hvad dit problem er, saa vil jeg kigge paa det.

Post a comment to pattern DROPS 161-29

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.