DROPS Lima
DROPS Lima
65% Wool, 35% Alpaca
from 4.60 CAD /50g
Get the yarn to make this pattern from 59.80CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS Extra 0-1035
DROPS design: Pattern no li-055
Yarn group B
--------------------------------------------------------
Measurements: approx. 91 x 120 cm / 35 3/4" x 47"
Materials: DROPS LIMA from Garnstudio
650 g color no 0100, off white

DROPS CIRCULAR NEEDLE (80 cm / 32'') SIZE 7 mm/US 10.75 – or size needed to get 14 sts in garter st = width 10 cm / 4''.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

More like this:
Home Blanketsgarter stitch
DROPS Lima
DROPS Lima
65% Wool, 35% Alpaca
from 4.60 CAD /50g
Get the yarn to make this pattern from 59.80CAD.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
PATTERN:
Row 1 to 28: K from RS, K from WS
Row 29 (from RS): * K 2 tog, 1 YO *, repeat from *-* and finish with K 1.
Row 30 (from WS): K all sts.
Repeat these 30 rows upwards.
--------------------------------------------------------

BLANKET:
Worked back and forth on circular needle. Cast on 127 sts with Lima on circular needle size 7 mm / US 10.75. Work PATTERN until piece measures approx. 120 cm / 47'' - adjust to finish after 28th row in pattern. Bind off.
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Extra 0-1035

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (10)

country flag Sandra Weisfeld wrote:

How many balls of DROPS LIMA YARN would i need to knit the blanket: cuddles by the sea?

27.03.2024 - 23:08

DROPS Design answered:

Dear Sandra, the piece takes about 650 grams of DROPS Lima. Since Lima comes in 50 gramm balls, you will need 13 balls. Happy Knitting!

28.03.2024 - 08:58

country flag Khadijah wrote:

Hei, Har du oppskriften dersom man ønsker å hekle dette pleddet?

09.08.2022 - 21:26

DROPS Design answered:

Hej Khadijah, Legg opp 127 masker på rundp 7 med DROPS Lima og strik MØNSTER, det finder du lige under INSTRUKSJONER :)

10.08.2022 - 07:33

country flag Marita wrote:

Skulle vilja sti ka Cuddle by the sea, pläd den är stickad i Lima 650g önskar sticka den i Muskot garnet hur många nystan behöver jag, och fungerar det att sticka i detta garn? Eller finns det ett annat bomulls alternativ? Tacksam för svar

14.04.2021 - 20:14

DROPS Design answered:

Hej Marita. Du kan använda vår konverterare för att se vilka alternativ som går åt och hur mycket det går åt. Du fyller bara i vilket garn du vill ersätta (DROPS Lima) och hur mycket (650 g) och att det används 1 tråd, så kan du se vad du kan byta det mot. Mvh DROPS Design

15.04.2021 - 13:33

country flag Jane Mathilde Andersen wrote:

Hej. Jeg vil gerne strikke et tæppe i Lima i farven Khaki (7810), og vil gerne have en følgetråd i Kid Silk. Hvilken farve vil du anbefale som følgetråd til Lima Khaki?

31.01.2021 - 22:27

DROPS Design answered:

Hei Jane. Fargevalg er ganske personlig, det beste er nok å se og bestemme fargene selv. Men kanskje farge 19 mørk grønn vil falle i smak? Men husk om du skal bruke Kid Silk sammen med Lima i denne oppskriften vil ikke strikkefastheten eller målene stemme. mvh DROPS design

01.02.2021 - 15:23

country flag Annelies wrote:

Hallo, Ik heb zin om een deken te breien voor een ledikantje.het patroon hierboven lijkt me heel leuk en eenvoudig. Graag wil ik de wol in de oudroze kleur. Daar staat echter dat de naalddikte 4 cm moet zijn. Is dit dan dezelfde wol en hoeveel bollen moet ik bestelllen

01.11.2020 - 22:50

DROPS Design answered:

Dag Annelies,

Welke wol je hebt gezien, weet ik niet, maar de wol die gebruikt wordt in het patroon is DROPS Lima en heeft een stekenverhouding van ongeveer 14 steken in ribbelsteek = 10 cm breed. Ideaal zou zijn als je een garen vindt die dezelfde stekenverhouding heeft. Dit staat vaak wel op de wikkel. Maak altijd een proeflapje en pas evt. de pendikte aan om op de juiste stekenverhouding te komen.

03.11.2020 - 13:20

country flag Annelies wrote:

Hallo, Ik heb zin om een deken te breien voor een ledikantje.het patroon hierboven lijkt me heel leuk en eenvoudig. Graag wil ik de wol in de oudroze kleur. Daar staat echter dat de naalddikte 4 cm moet zijn. Is dit dan dezelfde wol en hoeveel bollen moet ik bestelllen

01.11.2020 - 17:10

country flag Marianne wrote:

Gaan de randen niet krullen door de ribbelsteek. Ik dacht altijd dat je met boordsteek moet beginnen. Voor de rest super patroon. groetjes, Marianne

09.09.2019 - 13:24

DROPS Design answered:

Dag Marianne,

Randen in ribbelsteek kunnen inderdaad wel de neiging hebben om te krullen. Dit kun je oplossen door het werk heel voorzichtig op te persen met een strijkijzer, met een vochtige keukendoek tussen het strijkijzer en het werk. LET OP: doe dit zeer voorzichig, dus steeds heel kort (1 seconde) het strijkijzer op het werk

13.09.2019 - 10:25

country flag Maevette wrote:

Est ce normal que la LIMA se tricote en 7 sur ce modèle alors qu'elle se tricote normalement en 4? Merci de votre aide

13.10.2014 - 16:21

DROPS Design answered:

Bonjour Maevette, on tricote effectivement la couverture en déjaugé pour un résultat plus souple - sur la base d'un échantillon de 14 m point mousse = 10 cm de large (pensez à adapter vos aiguilles si nécessaire). Bon tricot!

14.10.2014 - 09:19

country flag Tiziana wrote:

Seguo i vs. modelli anzi li adoro e ho provato a realizzarne qualcuno. Vi chiedo questa coperta si può fare anche con i ferri senza l'uso dei circolari credo. Perchè voi proponete sempre i ferri circolari? Viene meglio il lavoro? E' una curiosità. Grazie

12.09.2014 - 09:21

DROPS Design answered:

Buonasera Tiziana, il modello in questione è una coperta, quindi può essere lavorata anche con i ferri dritti: tenga conto comunque del numero di maglie elevato, motivo per cui vengono consigliati i circolari, che permettono appunto, con i cavi di diversa lunghezza, di lavorare con un alto numero di maglie. Buon lavoro!!

12.09.2014 - 22:13

country flag Ellen wrote:

I have Lima for a sweater project I never started. I may have missed it in the pattern, but can you tell me how much Lima is required? I'm wondering whether I have enough. Thank you.

04.09.2014 - 20:46

DROPS Design answered:

Dear Ellen, you will find the required amount of yanr at the right side of the picture under tab "materials", ie for this blanket you need 650 g Lima divided by 50 g a ball Lima = 13 balls Lima. Happy knitting!

05.09.2014 - 09:27