DROPS Snow
DROPS Snow
100% Wool
from 2.65 $ /50g
Get the yarn to make this pattern from 15.90$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 158-13
DROPS design: Pattern no ee-502
Yarn group E or C + C
-----------------------------------------------------------
HAT:
Size: S/M – M/L – L/XL
Head circumference: 54/56 – 56/58 – 58/60 cm / 21½"-22½"-23"
Materials:
DROPS SNOW from Garnstudio
150-150-200 g color no 50, dark rose

DROPS CROCHET HOOK SIZE 7 mm / US K or L – or size needed to get 10 sc x 11 rows = 4'' x 4'' (10 x 10 cm).
DROPS STRAIGHT NEEDLES size 20 mm / US 36 – for pattern.

NECK WARMER:
Size: S/M - L
Circumference at the widest: 72-81 cm / 28½"-32''
Height: 26-26 cm / 10 1/4"-10 1/4''
Materials:
DROPS SNOW from Garnstudio
150 g for both sizes in color no 50, dark rose

DROPS CROCHET HOOK size 8 mm / L/11 – or size needed to get 9 dc x 5 rows = 4'' x 4'' (10 x 10 cm).
DROPS STRAIGHT NEEDLES size 20 mm / US 36 – for pattern.

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Snow
DROPS Snow
100% Wool
from 2.65 $ /50g
Get the yarn to make this pattern from 15.90$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
CROCHET INFO:
Beg every sc round with 1 ch instead of 1st sc. Finish every round with 1 sl st in ch at beg of round.

BROOMSTICK LACE:
ROW 1 (= WS):
Slip the first ch on needle size 20 mm / US 36, * pick up 1 st with hook through front loop of next st and slip st loosely on to needle size 20 mm / US 36 *, repeat from *-* the entire row. All sts on row are now loosely on needle size 20 mm / US 36.

ROW 2 (= RS):
* Insert hook through the first 3 sts on needle, work 1 sl st (this binds the 3 sts tog), slip sts off the needle and work ch 1, 3 sc through the 3 sts, work 1 ch *, repeat from *-* until 3 sts remain on needle, insert hook through the last 3 sts on the needle, work 1 sl st (this binds the 3 sts tog), work ch 1, slip sts off the needle and work 3 sc through the 3 sts.
----------------------------------------------------------

HAT:
The piece is worked top down. Crochet 4 ch on hook size 7 mm with Snow and form 1 ring with 1 sl st in first ch.
ROUND 1: Work 6 sc in ch-ring. READ CROCHET INFO!
ROUND 2: Work 2 sc in back loop of every sc = 12 sc.
ROUND 3: Work * 1 sc in back loop of next sc, 2 sc in back loop of next sc *, repeat from *-* = 18 sc.
ROUND 4: Work * 1 sc in back loop of each of the next 2 sc, 2 sc in back loop of next sc *, repeat from *-* = 24 sc. REMEMBER THE CROCHET GAUGE!
ROUND 5: Work * 1 sc in back loop of each of the next 3 sc, 2 sc in back loop of next sc *, repeat from *-* = 30 sc.
ROUND 6: Work * 1 sc in back loop of each of the next 4 sc, 2 sc in back loop of next sc *, repeat from *-* = 36 sc.
ROUND 7: Work * 1 sc in back loop of each of the next 5 sc, 2 sc in back loop of next sc *, repeat from *-* = 42 sc.
ROUND 8: Work * 1 sc in back loop of each of the next 6 sc, 2 sc in back loop of next sc *, repeat from *-* = 48 sc.
Inc in S/M and M/L are now done.
SIZE L/XL:
ROUND 9: Work * 1 sc in back loop of each of the next 7 sc, 2 sc in back loop of next sc *, repeat from *-* = 54 sc.

Then work next round as follows: Work 1 sc in back loop of every sc but inc 0-3-0 sc evenly = 48-51-54 sc. Continue to work 1 sc in back loop of every sc until piece measures 15-16-17 cm / 6"-6 1/4"-6 3/4".
Now work back and forth. Then work as follows:
Work BROOMSTICK LACE - see explanation above = 16-17-18 repetitions in width.
ROW 3 (= WS):
Work 1 sc in front loop of every sc on previous row = 48-51-54 sc.
ROW 4 (= RS):
Work 1 sc in back loop of every sc.
Repeat these 4 rows a total of 3 times vertically. Fasten off.

ASSEMBLY:
Sew tog in the side at Broomstick lace in every sc row.
----------------------------------------------------------

NECK WARMER:
Worked back and forth, top down. Work 66-75 LOOSE ch (includes 3 ch to turn with) on hook size 8 mm / L/11 with Snow. Work 1 dc in 4th ch from hook, then 1 dc in every ch = 63-72 dc (first 3 ch = 1 dc). Then work BROOMSTICK LACE - see explanation above = 21-24 repetitions in width.
Repeat rows 1-2 in pattern until finished measurements. REMEMBER THE CROCHET GAUGE! When piece measures approx. 18 cm / 7'', adjust so that next row is 2nd row in pattern, work as before over the next 9-12 sts (= 3-4 repetitions of pattern), * then work 4 sc in the 3 sts on needle *, repeat from *-* 2 more times (= 3 repetitions of pattern), work as before over the next 24-27 sts (= 8-9 repetitions of pattern), * then work 4 sc in the 3 sts on needle *, repeat from *-* 2 more times (= 3 repetitions of pattern), work as before over the last 12-15 sts (= 4-5 repetitions of pattern) = 69-78 sc on row. Continue pattern as before, now work 23-26 repetitions of pattern in width. When piece measures 26 cm / 10 1/4'', adjust so that last row is 2nd row in lace, fasten off.

ASSEMBLY:
Sew neck warmer tog in the side in each of the sc/dc rows.
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 158-13

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (41)

country flag Charlotte wrote:

Est ce que cela veut dire qu'il faut faire le broomstick lace à part ? Et ensuite le coudre. J'ai essayé directement sur le bonnet et ça n'est pas possible de mettre tout le rang du bonnet sur l'aiguille car c'est en rond. Merci

27.10.2021 - 13:24

DROPS Design answered:

Bonjour Charlotte, dans ce modele on le fait directement sur le bonnet. Si c'est trop complique, vous pouvez bien sur le faire separement et coudre a la fin. Bon crochet!

27.10.2021 - 14:45

country flag Charlotte wrote:

Je parlais du bonnet.

27.10.2021 - 08:31

DROPS Design answered:

Bonjour Charlotte, excuse-moi. Dans le bonnet, broomstick lace est tricote en allers et retours, donc cette partie en bas doit etre cousue dans chaque rang de mailles serrees. Cordialement!

27.10.2021 - 09:00

country flag Charlotte wrote:

Bonjour, pour le bonnet je ne comprends pas la fin. D'après ce que je comprends du début on crochette en rond mais à la fin il est noté d'assembler et de coudre. Je ne comprends pas cette partie. Pouvez vous préciser svp ? Merci

27.10.2021 - 07:29

DROPS Design answered:

Bonjour Charlotte, a la fin vous devez simplement coudre 2 extremites plus courtes du tour de cou. Cordialement!

27.10.2021 - 08:28

country flag Pattygzz wrote:

Hay un video para éste gorro, dónde lo encuentro?

23.04.2021 - 02:32

DROPS Design answered:

Hola Pattygzz . No hay un video paso a paso del gorro . Al final del patrón puedes encontrar unos vídeos explicativos para que te ayuden a realizar la labor.

24.04.2021 - 19:18

country flag Luz Elena Trujillo Tovar wrote:

Preferiría que sea en vídeo las instrucciones...porque no se entiende escritas...gracias

04.02.2021 - 08:26

country flag Cla wrote:

"Proseguire a lavorare 1 m.b nel filo posteriore di ogni m.b finché il lavoro non misura 15-16-17 cm." si intende 15 cm dal centro del lavoro, cioè in totale 30 cm di diametro?

01.02.2021 - 13:11

DROPS Design answered:

Buonasera Cla, la misura si intende dalla catenella iniziale. Buon lavoro!

01.02.2021 - 19:31

country flag Claudia wrote:

The numbers of stitches indicated in the hat pattern are for which of the indicated head sizes?

30.01.2021 - 19:03

DROPS Design answered:

Hi Claudia, for all sizes. The beginning of the hat is the same for 3 sizes, until round 8. Happy crocheting!

30.01.2021 - 19:37

country flag Clara wrote:

Salve non capisco le istruzioni relative alla confezione del beretto. Cucire quali lati insieme? Grazie

11.12.2020 - 22:57

DROPS Design answered:

Buongiorno Claudia, il cappello si lavora dalla punta in giù: deve cucire il lato per confezionarlo. Buon lavoro!

12.12.2020 - 11:30

country flag Caroline wrote:

Hej! Ska virka mössan storlek L/XL (visst blir det ingen ökning av fm då?), när börjar jag virka fram och tillbaka, visst virkar jag runt tom kvastskaftsmönstret börjar?

05.09.2019 - 12:43

DROPS Design answered:

Hej Caroline, nej ingen ökning efter 9:e varv. När arb mäter 17 cm börjar du virka fram och tillbaka. Lycka till :)

06.09.2019 - 10:27

country flag Karen Veldhuizen wrote:

Ik snap de 16 patroon herhalingen in de rondte bij de bezemsteelkant niet. Ik haak de S/M versie en heb 48 vasten. Ik moet steeds 5 vasten samenhaken vanaf naald 20 volgens het bezemsteelkant filmpje. Als ik dit 16 keer doe, kom ik op 80 vasten, maar ik heb er maar 48. Graag wat meer uitleg.

16.02.2019 - 20:27

DROPS Design answered:

Dag Karen,

In het filmpje worden 5 steken samen gehaakt, maar in het patroon moet je 3 steken samen haken, dan kom je wel uit.

26.02.2019 - 09:49