DROPS Nepal
DROPS Nepal
65% Wool, 35% Alpaca
from 3.30 $ /50g
Get the yarn to make this pattern from 72.60$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Snow Princess

Knitted DROPS jacket with raglan, hood and bamboo pattern, worked top down in ”Nepal”. Size: S - XXXL.

DROPS 156-1
DROPS design: Pattern no ne-158
Yarn group C or A + A
----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Finished measurements:
Bust: 84-92-100-110-120-132 cm / 33"-36 1/4"-39½"-43½"-47 1/4"-52"
Full length: 71-74-77-80-83-85 cm / 28''-29 1/8''-30 3/8''-31½''-32¾''-33½''

Materials:
DROPS NEPAL from Garnstudio
1100-1200-1350-1450-1600-1750 g color no 0100, off white

DROPS DOUBLE POINTED NEEDLES AND CIRCULAR NEEDLE SIZE (80 cm / 32'') 5 mm/US 8 - or size needed to get 17 sts x 22 rows in stockinette st = 4'' x 4'' (10 x 10 cm), or 20 sts BAMBOO PATTERN= width 10 cm / 4''.
DROPS WOOD BUTTONS DUFFLE NO 520: 4 pieces for all sizes

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Nepal
DROPS Nepal
65% Wool, 35% Alpaca
from 3.30 $ /50g
Get the yarn to make this pattern from 72.60$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth on needle):
K all rows. 1 ridge = K2 rows.

GARTER ST (in the round on double pointed needles):
* K 1 round and P 1 round *, repeat from *-*. 1 ridge = 2 rounds.

BAMBOO PATTERN (back and forth on needle):
Row 1 (= RS): * 1 YO, K 2, pass YO over 2 K sts *, repeat from *-*.
Row 2 (= WS): P all sts.
Repeat rows 1 and 2.

BAMBOO PATTERN (in the round on double pointed needles):
Round 1: * 1 YO, K 2, pass YO over 2 K sts *, repeat from *-*.
Round 2: K all sts.
Repeat rounds 1 and 2.

DECREASE TIP:
Dec 1 st before marker as follows: Work until 2 sts remain before marker, slip 1 st as if to K, K 1, psso.
Dec 1 st after marker as follows: K 2 tog.

RAGLAN:
Inc as follows at every marker:
Work until 1 st remains before marker, 1 YO, K 2, 1 YO = 2 sts inc. Repeat at the remaining markers in piece = 8 sts inc on needle.
On next row work YOs twisted (i.e. work in back loop of st instead of front) to avoid holes.
----------------------------------------------------------

JACKET:
Worked back and forth, top down on circular needle/double pointed needles.

HOOD:
Cast on 116 sts in all sizes (includes 2 edge sts in GARTER ST – see explanation above, in each side of piece) on circular needle size 5 mm / US 8 with Nepal. Work 1 ridge in garter st. Then work BAMBOO PATTERN back and forth – see explanation above, with 2 edge sts in garter st in each side (continue the 2 edge sts in garter st in each side until finished measurements). REMEMBER THE GAUGE! When piece measures 38 cm / 15'', work as follows from RS: Pattern as before over the first 30-32-36-40-44-48 sts, garter st over the next 56-52-44-36-28-20 sts AT THE SAME TIME dec 12-11-10-6-4-0 sts evenly, pattern over the remaining 30-32-36-40-44-48 sts = 104-105-106-110-112-116 sts. Continue back and forth until 3 ridges have been worked over the middle sts, AT THE SAME TIME on 2nd row from RS inc 4-8-14-19-25-32 sts evenly over sts in garter st, and on 3rd row from RS inc 4-7-13-18-25-31 sts evenly over sts in garter st = 112-120-133-147-162-179 sts.
Now work an elevation in back of neck in garter st as follows from RS: Work until 30-32-36-40-44-48 sts remain, turn, work until 30-32-36-40-44-48 sts remain, turn, work until 40-42-46-50-55-58 sts remain, turn, work until 40-42-46-50-55-58 sts remain, turn, work until 50-52-56-60-65-68 sts remain, turn, work until 50-52-56-60-65-68 sts remain, turn, work until 55-57-61-65-70-73 sts remain, turn, work until 55-57-61-65-70-73 sts remain, turn and work the rest of row (pattern over the last 30-32-36-40-44-48 sts).

YOKE:
Now work pattern as before over the first 30-32-36-40-44-48 sts, 1 st in stockinette st, insert 1st marker here, stockinette st over the next 15 sts, insert 2nd marker here, stockinette st over the next 20-24-29-35-42-51 sts, insert 3rd marker here, stockinette st over the next 15 sts, insert 4th marker here, 1 st in stockinette st, pattern as before over the remaining 30-32-36-40-44-48 sts. Now start inc for RAGLAN – see explanation above! Repeat inc every row 1-1-4-6-8-10 times (i.e. from RS and WS), and every row from RS 21-22-20-19-18-17 times = 288-304-325-347-370-395 sts. NOTE: Work the new inc sts on back piece and sleeves in stockinette st, and work the first 8 new inc sts on front piece in bamboo pattern (i.e. inc 2 sts before there is enough sts to work bamboo pattern), then work the remaining inc sts in stockinette st.
Piece now measures 20-21-22-23-24-25 cm / 8''-8¼''-8¾''-9''-9½''-9¾'' (measure from 1st row after edge in garter st at the back). Now work next row as follows: Work the first 52-55-60-65-70-75 sts, slip the next 61-63-65-67-69-71 sts on a stitch holder for sleeve, cast on 10 new sts under sleeve (insert a marker in the middle of the new sts), work the next 62-68-75-83-92-103 sts, slip the next 61-63-65-67-69-71 sts on a stitch holder for sleeve, cast on 10 new sts under sleeve (insert a marker in the middle of the new sts), work the remaining 52-55-60-65-70-75 sts. There are now 186-198-215-233-252-273 sts for body. NOW MEASURE PIECE FROM HERE!

BODY:
Continue back and forth with pattern as before. Work the new sts under sleeve in stockinette st. When piece measures 4 cm / 1½'' from marker under sleeves, inc 1 st on each side of each marker as follows: Work until 1 st before first marker, 1 YO, 2 sts in stockinette st, 1 YO, repeat at the other marker = 190-202-219-237-256-277 sts. Repeat inc every 3½-3½-3½-4-4½-6 cm / 1 1/4"-1 1/4"-1 1/4"-1½"-1 3/4"-2½" 11-12-12-12-11-8 more times = 234-250-267-285-300-309 sts. When piece measures 46-48-50-52-54-55 cm / 18"-19"-19 3/4"-20½"-21 1/4"-21½" from marker under sleeves, work 3 ridges. Loosely bind off.

SLEEVE:
Worked in the round on double pointed needles. Slip sts from stitch holder back on double pointed needles size 5 mm / US 8. Work 1 row from RS and cast on 10 new sts under sleeve (insert a marker in the middle of the new sts) = 71-73-75-77-79-81 sts. NOW MEASURE THE PIECE FROM HERE. When piece measures 4 cm / 1½'', beg dec on each side of marker - READ DECREASE TIP. Repeat dec every 2-2-2-1½-1½-1½ cm/3/4"-3/4"-3/4"-½"-½"-½" 12-13-13-14-14-15 more times = 45-45-47-47-49-49 sts. When piece measures 32-32-32-32-31-31 cm / 12½"-12½"-12½"-12½"-12 1/4"-12 1/4", inc 3 sts evenly in all sizes = 48-48-50-50-52-52 sts. Now work BAMBOO PATTERN in the round on double pointed needles - see explanation above. When piece measures 47-47-47-47-48-48 cm / 18½"-18½"-18½"-18½"-19"-19", dec 4 sts in all sizes = 44-44-46-46-48-48 sts. Work 3 ridges in GARTER ST in the round on double pointed needles - see explanation above. Bind off.

ASSEMBLY:
Sew the holes under the sleeves. Sew tog hood st by st in cast-on edge. Sew on buttons on section with bamboo pattern on left front piece as follows: Sew 1 button approx. 2 cm / 3/4'' in from edge and 43-45-47-49-51-53 cm / 17"-17 3/4"-18½"-19 1/4"-20"-21" from bind-off edge and 1 button 47-49-51-53-55-57 cm / 18½''-19¼''-20''-21''-21 5/8''-22½'' from bind-off edge. Repeat in the other side of section with bamboo pattern. Button through a hole in bamboo texture.

Diagram

All measurements in charts are in cm.

diagram measurements

Each of our patterns has specific tutorial videos to help you.

Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Rhinebeck 2016 Snow Princess

Janey, United States

Snow Princess

Deb, United States

Cappottino delle nevi

Angela, Italy

Post a comment to pattern DROPS 156-1

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (181)

country flag Izabela wrote:

Witam. Chciałam zapytać,ile oczek dodawać w co drugim rzędzie?Czy 18? Jeśli tak,to ile na rękaw,a ile na plecy?"Powt. dodawanie o. 1-1-4-6-8-10 razy w każdym rzędzie (tj. na prawej i na lewej stronie robótki) i 21-22-20-19-18-17 razy w każdym rzędzie na prawej stronie robótki"

10.10.2023 - 09:09

DROPS Design answered:

Witaj Izo, w tym wzorze na reglany dodajemy zawsze 8 oczek w rzędzie (czyli 1 oczko na przód, 2 oczka na rękaw, 2 oczka na tył, 2 oczka na drugi rękaw i 1 oczko na drugi przód). Pozdrawiamy!

10.10.2023 - 10:36

country flag Ulrike wrote:

Hallo, ich habe ein Problem bei den Raglanzunahmen in Gr.M. In der Anleitung heißt es, 24 M glatt rechts und wären nach den Zunahmen laut Anleitung bei 168. ich komme aber auf 170. Meine Rechnung: 23x2=46+24=170. Wo liegt mein Fehler? Oder liegt der Fehler in der Anleitung? Danke schon mal. Freundliche Grüße Ulrike

08.03.2023 - 10:45

Ulrike answered:

Hallo nochmal. Ich habe meinen Fehler gefunden. 2 Maschen gehen ja weg wegen den Raglanärmeln. Liebe Grüße Ulrike

08.03.2023 - 10:58

country flag Karen Coates wrote:

Worst pattern ever !!!! Restarted 4 times !!! My sister is an expert knitter and found this was the worst pattern ever !!!

29.01.2023 - 07:48

country flag Jennifer Winkler wrote:

I am working on the increases in the hood and was wondering if you can substitute make one right (or left) for the yarn overs? I am working on the XXXL for my mom and in the 20 garter stitches it says in the 2nd row to increase evenly 32 stitches, this would require two yarn over increases in a row, creating a hole no matter how you twist it. Thanks

22.09.2022 - 02:35

DROPS Design answered:

Dear Mrs Winkler, you can for sure use your favorite technique to increase - this lesson explains how to increase evenly, this might help you too. Happy knitting!

22.09.2022 - 09:49

country flag Jan wrote:

Hello, Why do you not show the photo of the back of the garment? I think that the look of the back of a design is as important as the front. In this particular design I would love to know what the hood looks like from the back - perhaps you would include a photo in your reply. Best wishes, Jan

28.04.2022 - 21:29

DROPS Design answered:

Dear Jan, we have sadly no pictures of the back piece and we don't have the jacket anymore. But you could maybe see the back piece on one of the several projects made by knitters and shown in Ravelry. Happy knitting!

29.04.2022 - 08:49

country flag Sandra Lowes wrote:

Is there a email address where I could send in a picture to see if anyone there knows how to do this stitch

24.12.2021 - 02:04

DROPS Design answered:

Dear Sandra, you could try our Facebook group, where you can add pictures and share them with other members to get help from them.

24.12.2021 - 18:37

country flag Embla wrote:

Hei. Jeg lurer på hvilken størrelse modellen på bildet har på seg? Og finnes det noen nærmere forklaring på hva de forskjellige størrelsene vil si? Jeg er ca lik på modellen på bildet, men jeg ønsker at jakken skal være litt mer romslig, så lurer veldig på hvilken størrelse jeg bør velge. På forhånd tusen takk for svar.

26.09.2021 - 09:56

DROPS Design answered:

Hej Embla. Modellen på bilden har storlek S eller M på sig (vet dessvärre inte vilken av de). Längst ner på oppskriften har du en måleskiss med alla mål i cm på plagget. Jämför dessa med ett plagg du har för att se vilken storlek som passar. Mvh DROPS Design

27.09.2021 - 09:37

country flag Jasmin wrote:

Ich noch mal und zwar steht ja da das man 2M zunehmen soll, damit ein Bambusmusterrapport aufgeht. Wie nehme ich am besten diese 2M zu.?

04.02.2021 - 16:40

DROPS Design answered:

Liebe Jasmin, die Raglanzunahmen werden gestrickt, wie unter RAGLANZUNAHMEN erklärt - die Zunahmben im Bambusmuster stricken Sie glatt rechts bis 2 Maschen zugenommen werden um das Bambusmuster zu stricken. Viel Spaß beim stricken!

05.02.2021 - 07:54

country flag Jasmin wrote:

Hallo, ich habe gleich zwei Fragen (Gr. S). Und zwar bei den verkürzten Reihen wird dort nur in Kreuz-Re gestrickt oder werden die ersten 30M im Bambusmuster gestrickt und beim PASSE habe ich am Anfang 112 machen und wenn ich dann am Anfang die erste Hin- und Rück-Reihe mit den Raglanzunahmen stricke und danach die 21x jede 2. R mit den Raglanzunahmen stricke komme ich nicht auf 288M sondern auf 293M und wollte Fragen ob ich dort etwas falsch verstanden habe. Vielen Dank im voraus.

04.02.2021 - 15:19

DROPS Design answered:

Liebe Jasmin, dieses Video zeigt, wie man die verkürzten Reihen strickt - bei der Passe wird es insgesamt 22 Mal 8 Maschen zugenommen (= 1 x in jede Reihe + 21 Mal in jeder 2. Reihe) = 112 Maschen + (22x8)= 288 Maschen. Viel Spaß beim stricken!

04.02.2021 - 15:31

country flag Gaby wrote:

How many balls of wool will I need to make a Size 8-10 uk size.

08.12.2020 - 22:33

DROPS Design answered:

Dear Gaby, you will find the total amount of yarn required for each size under the header, eg in size S you need 1100 g DROPS Nepal/50 g a ball = 22 balls Nepal for a size S. To find out your size, measure a similar garment you have and like the shape and compare them to the measurements in chart. read more here. Happy knitting!

09.12.2020 - 07:09