DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 3.75 € /50g
Get the yarn to make this pattern from 7.50€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS Children 24-12
DROPS design: Pattern no me-012-bn
Yarn group A and B
-----------------------------------------------------------

MERINO EXTRA FINE OWL:
Measurements: approx. height 10 cm
Materials:
DROPS MERINO EXTRA FINE from Garnstudio
50 g colour no 26, pistachio
50 g colour no 13, denim blue
+ some left-over yarn of colour no 18 green, 30 mustard and 01 off white
The large owl weighs approx. 10 g with cotton wool.

DROPS CROCHET HOOK SIZE 3 mm - for owl in Merino Extra Fine.
ACCESSORIES: Some cotton wool for filling

SAFRAN OWL:
Measurements: approx. height 8 cm
Materials:
DROPS SAFRAN from Garnstudio
50 g colour no 11, strong yellow
50 g colour no 23, brown
50 g colour no 22 light brown
+ some left-over yarn of colour no 28 orange and 17 white

The small owl weighs approx. 8 grams with cotton wool.

DROPS CROCHET HOOK SIZE 2.5 mm - for owl in Safran.
ACCESSORIES: Some cotton wool for filling

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Merino Extra Fine
DROPS Merino Extra Fine
100% Wool
from 3.75 € /50g
Get the yarn to make this pattern from 7.50€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

MAGIC CIRCLE:
When piece is worked in the round, start with this technique to avoid holes in the middle (instead of ch-ring): Hold the yarn end and wind the yarn one time around the index finger to make a loop. Hold the loop with left thumb and middle finger, place the yarn over left index finger. Insert hook through the loop, make a YO and pull yarn through loop, work 1 ch, then work dc around the loop. When the desired no of dc have been reached, pull the yarn end to tighten the loop. Fasten the yarn end at the back.

CROCHET INFO:
Beg every round with 1 ch and finish with 1 sl st in first ch from beg of round.

COLOUR CHANGE:
To get a nice transition between the colour changes, work last sl st on round with the new colour as follows: Insert hook in last ch from beg of round, make a YO with the new colour and pull it through st on hook.
----------------------------------------------------------

OWL:
Piece is worked in the round with Merino Extra Fine or Safran on hook size 2.5 or 3 mm. Start by making a MAGIC CIRCLE - read explanation above - with green or strong yellow.
ROUND 1: Read CROCHET INFO and COLOUR CHANGE! Work 8 dc in the magic circle.
ROUND 2: 2 dc in first dc, 2 htr in next dc, 1 htr and 1 tr in next dc, 2 tr in each of the next 2 dc, 1 tr and 1 htr in next dc, 2 htr in next dc, 2 dc in last dc on round = 16 sts.
ROUND 3: Switch to pistachio or light brown and work 1 dc in first st, 2 dc in next st, 1 dc in next st, 2 htr in each of the next 2 sts, 2 tr in next st, 1 dtr in front loop and 1 dtr in back loop of each of the next 4 sts, 2 tr in next st, 2 htr in each of the next 2 sts, 1 dc in next st, 2 dc in next st, 1 dc in last st on round = 28 sts.
ROUND 4: Work 1 dc in every st the entire round.
ROUND 5: Switch to denim blue or brown and work 1 dc in first st, 1 htr in next st, 1 tr in same st, 2 dtr in next st, 1 ch (= top of ear), 2 dtr in next st, 1 tr in next st, 1 htr in same st, 1 dc in next st, 2 dc in next st, 1 dc in next st, 1 htr in next st and 1 tr in same st, 2 tr in next st, 2 dtr in each of the next 8 sts, 2 tr in next st, 1 tr in next st, 1 htr in same st, 1 dc in next st, 2 dc in next st, 1 dc in next st, 1 htr in next st, 1 tr in same st, 2 dtr in next st, 1 ch (= top of ear), 2 dtr in next st, 1 tr in next st, 1 htr in same st, 1 dc in last st on round = 50 sts (+ 2 ch). Work another owl the same way. Fasten off.

EYES:
Worked in the round. Start by making a MAGIC CIRCLE - read explanation above - with denim blue or brown.
ROUND 1: READ CROCHET INFO - Work 6 dc in the magic circle.
ROUND 2: Switch to off white or white and work 2 dc in every dc the entire round = 12 dc.
Work another eye the same way. Fasten off.

ASSEMBLY:
Fasten the eyes on the owl. Embroider the beak with mustard or orange as follows: Beg in the mid of the magic circle and sew a stitch down to 2nd round 2 times, and sew from the mid of circle and diagonally down to 1st round on each side of the first stitches; only 1 time on each side.

Then work the owl tog with pistachio or strong yellow. Place the two owls on top of each other, WS against WS, with the beak towards you. Work through both layers as follows: Work 2 dc in ch at the top of ear on the left side. Then work as follows: 1 dc in the next 6 sts, 1 htr in next st and 1 tr in same st, 2 dtr in next st, 1 tr in next st and 1 htr in same st, 1 dc in each of the next 8 sts, insert 1 marker in the last st and work 1 dc in each of the next 14 sts, 1 htr in next st and 1 tr in same st, 2 dtr in next st, 1 tr in next st and 1 htr in same st, 1 dc in each of the next 6 sts and work 2 dc in ch (= top of right ear). Fill the owl with some cotton wool and continue as follows: 1 dc in each of the next 10 sts and finish round with 1 sl st in first dc from beg of round = 60 sts. Fasten off.

Work claws in mustard or orange. Beg in the st with marker as follows: * 1 dc, 3 ch, 1 dc in next st, 4 ch, 1 dc in next st, 3 ch, 1 dc in next st *, repeat from *-* 1 more time. Fasten off.
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Children 24-12

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (11)

country flag Catharina Santasilia wrote:

Jeg elsker disse ugler! Jeg har nu lavet langt over 50 af dem. Jeg har min egen ugle familie der sidder oppe på hylden, men til jul fik ALLE ugler! -og de elsker dem! Jeg har lavet dem i forskellige størrelser, for skellige farver. Jeg elsker at der ikke er nogle regler. Jeg er stadig begynder, så det var fedt at finde en opskrift på noget der var lidt mere udfordrende, men samtidig nem og håndgribelig, og ikke mindst hurtig at lave, så jeg kan se resultaterne samme aften! Tusinde tak!

23.01.2021 - 00:56

Anne Nielsen wrote:

Jeg elsker dette design og det skal være en del af gaven til tøsen sammen med en Filibabba Babynest. Det bliver så flot til den lille ny når de kommer hjem.

21.10.2018 - 22:48

country flag Evelyne wrote:

Je n'ai que 24 mailles au 3ème rang au lieu de 28 mailles, Pouvez vous m expliquer l' erreur. Merci

10.11.2017 - 16:11

DROPS Design answered:

Bonjour Evelyne, avez-vous regardé la vidéo qui montre comment crocheter cette chouette? Elle devrait vous permettre de trouver votre erreur. Bon crochet!

13.11.2017 - 08:30

country flag Kendjpepenx wrote:

Asvab online class how to cheat on the asvab asvab test practice asvab prep asvab 77

05.09.2015 - 03:55

Majkam wrote:

Pri spájaní dielov spolu začíname na ľavej strane sovičky (ako je v anglickom popise) nie na ľavom uchu, keďže sova je tvárou k tvorcovi

18.01.2015 - 14:18

DROPS Design answered:

Ano, přesně tak - začínáme na špičce ucha na levé straně sovy (= na špičce levého ucha, jak je uvedeno v české verzi); strany vnímáme tak, jak je vidíme před sebou při práci. Hodně zdaru! Hana

18.01.2015 - 17:06

country flag Marina wrote:

M.m.a. E m.m.d. Cosa significano?

01.09.2014 - 21:20

DROPS Design answered:

Buonasera Marina. M.m.a corrisponde a mezza maglia alta. M.a.d corrisponde a maglia alta doppia. Se può esserle utile, cliccando sul tab video, sulla striscia grigia alla destra della fotografia, trova l'elenco di tutti i video che possono aiutarla a realizzare il gufo. Buon lavoro!

01.09.2014 - 21:59

country flag Isabella Schmidt wrote:

Kan man ikk lave den større? kunne godt tænke mig at lave en familie

05.08.2014 - 11:10

DROPS Design answered:

Hej Isabella. Det kan du vel godt. Jeg kan desværre ikke hjælpe dig med at skrive et nyt mønster, men du kan prøve dig frem og evt tage mere ud på cirklen inden du skifter til brun/jeansblå til kanten. God fornøjelse.

06.08.2014 - 16:54

country flag Joke V.d.Sluijs wrote:

Een prachtig patroon, met plezier gemaakt. Volgens mij zijn echter het patroon voor de grote en kleine uil hetzelfde. Jammer

25.07.2014 - 11:48

Rita wrote:

Das Muster stimmt. In der 5.Reihe werden 22 M. zugenommen.

07.06.2014 - 15:52

country flag Steffi wrote:

Hallo liebes Team, leider hat sich ein Fehler in Reihe 4 eingeschlichen. Die summe aller Maschen ergibt nicht 50. Wo müssen die fehlenden hin? LG Steffi

07.06.2014 - 13:51

DROPS Design answered:

Liebe Steffi, Antwort siehe oben! :-)

08.06.2014 - 10:59