DROPS Cotton Light
DROPS Cotton Light
50% Cotton, 50% Polyester
from 1.25 $ /50g
Get the yarn to make this pattern from 11.25$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

Angel Light

Knitted DROPS jacket in garter st with lace pattern in ”Cotton Light”. Size: S - XXXL.

DROPS Extra 0-917
DROPS design: Pattern no cl-019
Yarn group B
-----------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Finished measurements:
Bust: 84-92-100-110-122-134 cm /
33''-36¼''-39 3/8''-43 3/8''-48''-52¾''
Full length: 54-56-58-60-62-64 cm /
21¼''-22''-22¾''-23 5/8''-24 3/8''-25¼''

Materials:
DROPS COTTON LIGHT from Garnstudio
450-500-500-550-650-700 g color no 02, white

DROPS CIRCULAR NEEDLE (80 cm / 32'') SIZE 4 mm – or size needed to get 21 sts x 28 rows in stockinette st = 10 x 10 cm / 4'' x 4'', 21 sts x 42 rows in garter st = 10 x 10 cm / 4'' x 4'', and 17 sts with pattern according to diagram A.2 = 10 cm / X'' in width.
DROPS CIRCULAR NEEDLE (80 cm / 32'') SIZE 3.5 mm/ US 4 – for rib and garter st.

DROPS ANGULAR SILVER BUTTON NO 534: 7 pieces for all sizes

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Cotton Light
DROPS Cotton Light
50% Cotton, 50% Polyester
from 1.25 $ /50g
Get the yarn to make this pattern from 11.25$.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favorites!
Valid until 04.12.2024

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
GARTER ST (back and forth on needle):
K all rows. 1 ridge = 2 rows K.

PATTERN:
See diagrams A.1 and A.2. Diagrams show all rows in pattern seen from RS.

BUTTONHOLE:
Dec for buttonholes on right band. 1 buttonhole = P tog second and third st from edge and make 1 YO.
Dec for buttonholes when piece measures:
SIZE S: 3, 10, 17, 23, 29, 35 and 41 cm /
1 1/8",4",6¾",9",11 3/8",13¾" and 16 1/8"
SIZE M: 3, 10, 17, 24, 31, 37 and 43 cm /
1 1/8",4",6¾",9½",12¼",14½" and 17"
SIZE L: 3, 10, 17, 24, 31, 38 and 45 cm /
1 1/8",4",6¾",9½",12¼",15" and 17¾"
SIZE XL: 3, 11, 19, 26, 33, 40 and 47 cm /
1 1/8",4 3/8",7½",10¼",13",15¾" and 18½"
SIZE XXL: 3, 11, 19, 27, 35, 42 and 49 cm /
1 1/8",4 3/8",7½",10 5/8",13¾",16½" and 19¼"
SIZE XXXL: 3, 11, 19, 27, 35, 43 and 51 cm /
1 1/8",4 3/8",7½",10 5/8",13¾",17" and 20"
----------------------------------------------------------

JACKET:
Loosely cast on 216-237-258-286-314-342 sts (includes 5 band sts in each side towards mid front) on circular needle size 3.5 mm / US 4 with Cotton Light. P 1 row from WS.
Work next row as follows from RS: 5 band sts which are worked P on all rows until finished measurements, * K 3, P 4 *, repeat from *-* until 8 sts remain, finish with K 3 and 5 band sts which are worked P on all rows until finished measurements.
Continue rib like this.
When piece measures approx. 3 cm / 1 1/8'', dec on next row from WS: Dec all 4 K sts to 3 K sts by K 2 tog in every repetition = 187-205-223-247-271-295 sts. Remember BUTTONHOLES on band - see explanation above.
Switch to circular needle size 4 mm / US 6 and work next row from RS as follows: 5 band sts as before, work pattern according to diagram A.1a until 8 sts remain, work A.1b (= 3 sts) and finish with 5 band sts as before. Continue pattern like this. REMEMBER THE GAUGE!
When piece measures 20-21-22-23-24-25 cm / 8''-8¼''-8¾''-9''-9½''-9¾'' - stop after 1 row with holes, K 1 row from WS while AT THE SAME TIME dec 17-15-15-19-21-15 sts evenly (do not dec over bands and P bands as before) = 170-190-208-228-250-280 sts.
K 1 row from RS and K 1 row from WS (P bands).
Now K 1 row from RS while AT THE SAME TIME dec 31-35-37-41-47-53 sts evenly (do not dec over band sts) = 139-155-171-187-203-227 sts.
P 1 row from WS.
Then work next row as follows from RS: 5 band sts, work A.2a (= 4 sts), work A.2b until 10 sts remain, work A.2c (= 5 sts) and finish with 5 band sts.
When A.2 has been worked vertically, K 1 row from RS while AT THE SAME TIME inc 47-47-47-55-63-63 sts evenly (do not inc over bands) = 186-202-218-242-266-290 sts. Insert 1 marker 49-53-57-63-69-75 sts in from each side (= 88-96-104-116-128-140 sts between markers on back piece).
Then continue in garter st back and forth on needle.
When piece measures 29-30-31-32-33-34 cm / 11 3/8''-11¾''-12¼''-12½''-13''-13 3/8'', divide the piece at the markers and finish each part separately.

BACK PIECE:
= 88-96-104-116-128-140 sts. Work in garter st back and forth on needle while AT THE SAME TIME inc 1 st in first and last st on row by working 2 sts in the same st.
Repeat inc on every row from RS 4-4-4-3-3-3 more times, then cast on 31-29-27-24-20-16 new sts for sleeves at the end of the next 2 rows = 160-164-168-172-176-180 sts on needle.
Continue in garter st back and forth on needle but P the outermost 5 sts in each side both from RS and WS (= sleeve edges), work the other sts K from RS and K from WS.
When piece measures 51-53-55-57-59-61 cm / 20''-21''-21 5/8''-22½''-23¼''-24'', slip the sts at the beg of every row in each side on 1 stitch holder for diagonal shoulder as follows (work sts before slipping them on the holder to avoid cutting the yarn): Slip 8 sts on to stitch holder 5 times in total in each side and then 25-26-27-28-29-30 sts 1 time – NOTE: Slip 1st st on left needle after the sts that have been slipped on 1 stitch holder, tighten yarn, and continue to work. This is done to avoid big holes in the transitions.
AT THE SAME TIME when piece measures 52-54-56-58-60-62 cm / 20½''-21¼''-22''-22¾''-23 5/8''-24 3/8'', bind off the middle 26-28-30-32-34-36 sts for neck and finish each shoulder separately. Then bind off 2 sts on next row from neck.
When all sts have been slipped on 1 stitch holder and when neck bind off is done, piece measures approx. 54-56-58-60-62-64 cm / 21¼''-22''-22¾''-23 5/8''-24 3/8''-25¼'' from bottom edge and up to shoulder on the longest.

RIGHT FRONT PIECE:
= 49-53-57-63-69-75 sts. Work in garter st back and forth on needle AT THE SAME TIME cast on new sts at the end of row towards the side for sleeve as on back piece = 85-87-89-91-93-95 sts.
Continue in garter st back and forth on needle but P the outermost 5 sts in the side towards the sleeve + the 5 band sts on every row.
When piece measures 42-44-46-48-50-52 cm / 16½''-17¼''-18''-19''-19¾''-20½'', slip the outermost 7-8-9-10-11-12 sts on 1 stitch holder for neck (work the sts before slipping them on the stitch holder).
Continue to bind off for neck at beg of every row from neck as follows: 2 sts 4 times and 1 st 5 times.
AT THE SAME TIME when piece measures 51-53-55-57-59-61 cm / 20''-21''-21 5/8''-22½''-23¼''-24'', slip the sts at beg of every row from the side on 1 stitch holder for diagonal shoulder as on back piece.
When all sts have been slipped on 1 stitch holder and when neck bind off is done, piece measures approx. 54-56-58-60-62-64 cm / 21¼''-22''-22¾''-23 5/8''-24 3/8''-25¼'' from bottom edge and up to shoulder on the longest.

LEFT FRONT PIECE:
Work as right front piece but reversed.

ASSEMBLY:
Slip the 65-66-67-68-69-70 sts from stitch holder on one shoulder back on circular needle size 4 mm / US 6 and K 1 row - NOTE: To avoid holes in every transition where sts were slipped on stitch holder, pick up the thread between the 2 sts in the transition and K tog with 1st st on left needle.
On next row loosely bind off with K. Repeat the same way along the 3 other shoulders.
Sew shoulder seams inside bind off edge - make sure the seam is not tight. Sew underarm seams inside 1 edge st.
Sew on buttons.

NECK EDGE:
From RS pick up approx. 98 to 120 sts around the neck (including sts on stitch holders at the front) on circular needle size 3.5 mm / US 4 with Cotton Light. K 1 row from WS, K 1 row from RS and K 1 row from WS. Then loosely bind off with K from RS.


Diagram

All measurements in charts are in cm.

symbols = K from RS, P from WS
symbols = P from RS, K from WS
symbols = 1 YO between 2 sts
symbols = K 2 tog
symbols = slip 1 st as if to K, K 1, psso
symbols = slip 1 st as if to K, K 2 tog, psso
diagram
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn converter

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn converter will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS Extra 0-917

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (1)

country flag Kati wrote:

Tere! Tegin selle kampsiku juhendi järgi valmis. Õpetuse alguses ajas mind segadusse see, et 3,5 varrastega tehakse ripskude (sinna võiks lisada, et äärise ripskude nt). Kaelaäärise ma heegeldasin hoopis ja diagonaalne õlg ei tulnud väga hästi välja. Aga muidu kaunis ja lihtne muster :) Muide XXXL-le läheb lõnga 850g, nööpe panin mina rohkem ja ringvardad kõige mugavamad olid 1 m (allosa ringsel kudumisel).

27.05.2013 - 14:29