DROPS / 148 / 29

Nelle by DROPS Design

Crochet DROPS slippers with strap and button in ”Nepal”. Size 35 - 43.

Tags: slippers,

DROPS design: Pattern no ne-114
Yarn group C
-----------------------------------------------------------
Size: 35/37 - 38/40 - 41/43
Foot length: 22 - 24 - 27 cm
Materials:
DROPS NEPAL from Garnstudio
150-150-150 g colour no 0100, off white

DROPS CROCHET HOOK SIZE 3.5 mm – or size needed to get 18 dc in width x approx. 20 rows vertically = 10 x 10 cm.

DROPS WOOD BUTTON BURNED NO 512: 2 pieces

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (36)

65% Wool, 35% Alpaca
from 2.20 £ /50g
DROPS Nepal uni colour DROPS Nepal uni colour 2.20 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Nepal mix DROPS Nepal mix 2.30 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 6.60£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
CROCHET INFO:
Replace first dc at beg of every dc round with 1 ch. Finish round with 1 sl st in ch from beg of round.
Replace first dc at beg of every dc row with 1 ch. Finish row with 1 sl st in ch from beg of previous row.

DECREASE TIP:
Work 1 dc but wait with last pull through (= 2 sts on hook), then work next dc but on last pull through, pull thread through all sts on hook = 1 dc dec.
----------------------------------------------------------

SLIPPER:
Worked in the round from the toe and to the back to the instep, then work back and forth until mid back of heel.

Work 4 ch on hook size 3.5 mm with Nepal and form a ring with 1 sl st in 1st ch.
ROUND 1: Work 6-6-5 dc in ch-ring – READ CROCHET INFO!
ROUND 2: Work 2 dc in every dc = 12-12-10 dc.
ROUND 3 (and then every odd round): Work 1 dc in every dc.
ROUND 4: * 1 dc in first dc, 2 dc in next dc *, repeat from *-* 6-6-5 times in total = 18-18-15 dc.
ROUND 6: * 1 dc in each of the first 2 dc, 2 dc in next dc *, repeat from *-* 6-6-5 times = 24-24-20 dc.
ROUND 8: * 1 dc in each of the first 3 dc, 2 dc in next dc *, repeat from *-* 6-6-5 times = 30-30-25 dc.
ROUND 10: * 1 dc in each of the first 4 dc, 2 dc in next dc *, repeat from *-* 6-6-5 times = 36-36-30 dc. Inc in size 35/37 are now done. Continue below for all sizes.
ROUND 12: * 1 dc in each of the first 5 dc, 2 dc in next dc *, repeat from *-* 6-5 times in total = 42-35 dc. Inc in size 38/40 are now done. Continue below for all sizes.
ROUND 14: * 1 dc in each of the first 6 dc, 2 dc in next dc *, repeat from *-* 5 times in total = 40 dc.
ROUND 16: * 1 dc in each of the first 7 dc, 2 dc in next dc *, repeat from *-* 5 times in total = 45 dc. Inc in size 41/43 are now done.

ALL SIZES:
= 36-42-45 dc on round. Work in the round with 1 dc in every dc (without finishing the rounds) until piece measures 14-16-18 cm. Then work dc back and forth over the first 24-30-32 dc (i.e. do not work over the last 12-12-13 dc on round) - remember CROCHET INFO! When slipper measures 20-22-25 cm (i.e. approx. 6-6-7 cm from where the piece was divided), insert 1 marker in the middle of piece (= 12-15-16 dc on each side of marker). On next row dec 1 dc on each side of marker, i.e. beg 2 sts before marker and work the next 4 dc tog 2 by 2 – READ DECREASE TIP (= 2 dc dec). Work 1 row without dec. Repeat dec on next row (= 2 dc dec) = 20-26-28 sts remain on row. Work 1 row without dec, place the slipper double and work tog mid back with one row sl sts through both layers (slipper now measures approx. 22-24-27 cm from toe to heel). Cut and fasten the thread.

EDGE:
Beg mid back and work a finishing edge at the top around the opening of slipper as follows: 1 dc in first st, * 1 ch, skip approx. ½ cm, 1 dc in next st *, repeat from *-* the entire round but finish round with 1 sl st in dc from beg of round (instead of 1 dc in next st). Cut and fasten the thread.

STRAP WITH BUTTON:
Work 6 ch on hook size 3.5 mm with Nepal. Work 1 dc in 2nd ch from hook, then work 1 dc in each of the next 4 ch = 5 dc on row. Then work back and forth with 1 dc in every dc - remember CROCHET INFO. When strap measures 15-16-17 cm, cut the thread (cut it long enough to use for fastening the strap). Sew one short side of strap on to inside of slipper, place the strap nicely over the instep on slipper and fasten a button on the outer side of slipper - see picture.
Work another slipper the same way but sew the strap with button on to the opposite side.

Comments (36)

Leave your comment!

Lise Fortin 09.11.2015 - 23:47:

J'aime beaucoup ces chausson mais dans le tour no:1 je ne comprends pas, que veut dire 6-6-5ms ?

DROPS Design 10.11.2015 kl. 09:46:

Bonjour Mme Fortin, les explications de ce modèle sont en 3 tailles: dans les 2 premières tailles, crochetez 6 ms, dans la 3ème taille, crochetez 5 ms. Bon crochet!

Ida Costagliola 09.10.2015 - 16:39:

Salve nn ho capito se si realizza utilizzando il filo a doppio oppure semplice...nel campione parla di filo a due capi ( anche se due capi di nepal con l uncinetto 3.5 mm mi sembra strano)

DROPS Design 09.10.2015 kl. 17:02:

Buongiorno Ida. Chiediamo scusa, abbiamo corretto un errore nel testo del campione. Si lavora con un solo capo. La ringraziamo per la segnalazione. Buon lavoro!

Iris 30.08.2015 - 22:36:

Hallo, eine Frage: In der Anleitung steht Nadelstärke 3,5. Auf dem Garn steht Nadel 5. Welche Nadel ist denn nun richtig? Viele Grüsse Iris

DROPS Design 07.09.2015 kl. 17:31:

Die Anleitung ist immer maßgeblich, und dabei müssen Sie zudem die Maschenprobe beachten, es ist wichtig, dass Sie die Nadelstärke verwenden, mit der Sie die Maschenprobe erreichen. Die Angabe auf der Banderole ist nur ein Richtwert. Mit der Nadelstärke können Sie die Festigkeit des gearbeiteten Teils beeinflussen, die Schuhe sollen ja recht fest werden, also verwendet man hier eine dünnere Nadel. Achten Sie wie gesagt darauf, die Maschenprobe einzuhalten, damit die Schuhe hinterher passen.

Iris 29.08.2015 - 23:28:

Hallo, eine Frage: In der Anleitung steht Nadelstärke 3,5. Auf dem Garn steht Nadel 5. Welche Nadel ist denn nun richtig? Viele Grüsse Iris

DROPS Design 19.09.2015 kl. 22:45:

Antwort siehe oben! :-)

María Guadalupe Gutiérrez 03.03.2015 - 02:03:

Necesito un gráfico para poder realizar el proyecto, me lo pueden enviar? Atentamente

Anna 21.01.2015 - 08:51:

Liebes Drops-Team, Die Hausschuhe sind wunderschön, vielen dank für die tolle Anleitung! Ich habe eine Frage zum Material: läuft sich Drops Nepal schnell durch? Also sollte man die Schuhe noch mit Sohlenlatex bearbeiten, oder ist das unnötig? Sockenwolle ist Nepal eigentlich nicht, oder? Lieben Gruß, Anna

DROPS Design 27.01.2015 kl. 22:30:

Antwort siehe unten! :-)

Anna 21.01.2015 - 08:36:

Liebes Drops-Team, Die Hausschuhe sind wunderschön, vielen dank für die tolle Anleitung! Ich habe eine Frage zum Material: läuft sich Drops Nepal schnell durch? Also sollte man die Schuhe noch mit Sohlenlatex bearbeiten, oder ist das unnötig? Sockenwolle ist Nepal eigentlich nicht, oder? Lieben Gruß, Anna

DROPS Design 27.01.2015 kl. 22:30:

Ja, bei Nepal wäre es sinnvoll, die Schuhe mit Latex zu versehen, dann haben Sie länger etwas davon. Nepal ist recht weich (was die Schuhe ungemein gemütlich macht :-) ) und ist zudem ein Naturgarn, das nicht mit Kunstfaser verstärkt ist.

Eva 17.12.2014 - 19:25:

Liebes Drop-Team! Werden im Teil der spiralig gehäkelten Teil ohne Kettmaschen auch die Luftmaschen am Anfang jeder Runde weggelassen? Vielen Dank für die Antwort und die tollen Muster! :)

DROPS Design 21.12.2014 kl. 23:12:

Liebe Eva, danke für Ihr Lob! Ja genau, Sie lassen beim Häkeln der spiralförmigen Runden auch die Luft-M weg und häkeln einfach immer mit festen M weiter. Am besten markieren Sie sich dabei den Rd-Beginn und führen den Markierer beim Häkeln mit.

Dagny Dahl 01.12.2014 - 18:16:

Hei! Det står at på begynnelsen av en omgang skal en fm erstattes av en lm. Vil dette si at den da skal hekle en lm og 5 fm for første omgang (for størrelse 1 og 2)? Altså totalt 6 med fm og en lm? På forhånd takk for svar!

DROPS Design 02.12.2014 kl. 15:20:

Hej Dagny, Ja det stemmer, i de 2 første størrelser hækler du 1 lm og 5 fm på første omgang. God fornøjelse!

Christine 19.11.2014 - 20:18:

Hei hei! Nybegynner på hekling så har et spørsmål! Når det står lm erstatter første fm, må jeg da minusere på antall masker som er i oppskriften, eller følger jeg bare maskene som står?:)

DROPS Design 21.11.2014 kl. 13:52:

Hei Christine. Du skal fölge maskerne og antallene som der staar i opskriften, du skal ikke traekke noget fra.

Post a comment to pattern DROPS 148-29

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.