DROPS / 147 / 19

Jane by DROPS Design

Knitted DROPS slippers with 1 thread "Big Fabel" or 2 threads "Fabel". Size 35 - 43.

Tags: lace, slippers,

DROPS design: Pattern no bf-014
Yarn group C
-----------------------------------------------------------
Size: 35/37 - 38/40 - 41/43
Foot length: approx. 22 - 24 - 27 cm

Materials: DROPS BIG FABEL from Garnstudio
100-100-200 g colour no 109, dark pink

Or use:
Materials: DROPS FABEL from Garnstudio
100-100-150g colour no 109, dark pink

DROPS CIRCULAR NEEDLE (60 cm) SIZE 4.5 mm - or size needed to get 18 sts x 23 rows in stocking st in 1 thread Big Fabel or 2 threads Fabel = 10 x 10 cm.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (64)
DROPS Big Fabel DROPS Big Fabel
75% Wool, 25% Polyamide
Discontinued
find alternatives
DROPS Needles & Hooks

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
PATTERN: See diagram A.1. Diagram shows all rows in pattern seen from RS.

GARTER ST (back and forth on needle):
K all rows. 1 ridge = 2 rows K.

INCREASE TIP:
Inc 1 st on each side of the middle 13 sts by making 1 YO, on next row work the YOs twisted (i.e. in back loop of st) to avoid holes. Work the inc sts in stocking st.
--------------------------------------------------------

SLIPPER:
Worked back and forth on circular needle from mid back, beg at the top and work downwards.
Cast on 49-53-57 sts on needles size 4.5 mm with 1 thread Big Fabel og 2 threads Fabel. Work 4 ridges in garter st over all sts - see explanation above! Then work as follows from RS: 1 st in garter st, 17-19-21 sts in stocking st, A.1 (= 13 sts), 17-19-21 sts in stocking st, 1 st in garter st. Continue this pattern - AT THE SAME TIME on 1st row, inc 1 st on each side of the middle 13 sts – see INCREASE TIP! Repeat inc on every row (i.e. from both RS and WS) a total of 15-17-20 times = 79-87-97 sts. Work 1 row after last inc. Now piece measures approx. 9-10-11 cm. Continue in garter st over all sts - AT THE SAME TIME after 3 ridges, cast off 1 st at beg of the next 6 rows (i.e. 3 sts cast off in each side) = 73-81-91 sts. When 6 ridges in total have been worked, loosely cast off.

ASSEMBLY:
Sew seam under foot and up along mid back - sew edge to edge to avoid a chunky seam under the foot.

Knit another slipper.

Diagram

= K from RS, P from WS
= P from RS, K from WS
= 1 YO between 2 sts
= slip 1 st as if to K, K 2 tog, psso
= K 2 tog
= slip 1 st as if to K, K 1, psso

Lena Holum 25.01.2019 - 19:26:

Jeg strikker str 38/40. Hvis man skal øke 2 m på retten og 2 m på vrangen totalt 17 gngr blir det totalt 68 m (4 x 17) i tillegg til de 53 man legger opp. Det blir 121 m, ikke 87. Det går derimot opp hvis man øker 2 m pr 2 rader. Dette er forvirrende.

DROPS Design 30.01.2019 kl. 14:59:

Hei Lena. Du øker 1 maske på hver side av de 13 midterste maskene (= 2 masker) totalt 17 ganger. 17 x 2 = 34 masker økt. Du hadde 53 masker på pinnen fra før = 87 masker på pinnen. God fornøyelse

Magda Rosario 12.08.2016 - 02:25:

Also, how many times do I repeat the A1 diagram?

DROPS Design 14.08.2016 kl. 12:06:

Dear Magda, you only repeat it once.

Magda Rosario 12.08.2016 - 02:18:

When do I start increasing? The instructions indicate to increase on the rs and ws, when do I do that? Are these increases for the sides of the slipped? And where do I increase? Thank you for your help.

DROPS Design 14.08.2016 kl. 12:10:

Dear Magda, you start increasing in the first row. The increases are for the sides of the slippers and you have to increase before and after working A1 on each side.

Eva Jansson 09.03.2016 - 21:40:

Enligt bild på mönstret ska det vara 2 bårder med hålmönster men kan inte hitta det i mönstret. Har stickat som det står men får bara ett mönster. Undrar även om hur omslaget i diagrammet ska stickas från avigsidan, rät eller avig?

DROPS Design 10.03.2016 kl. 10:07:

Hej Eva, du bør hinna med mönstret 2 ggr innan du fortsätter med rätstickat över alla m. Omslaget i diagrammet stickas som vanligt så du får ett litet hål. Lycka till!

Nathalie 25.09.2015 - 17:01:

Bonjour, j'ai des problèmes avec les augmentations en jetés. Dans ce modèle, les jetés se trouvent toujours à la frontière entre des mailles endroit et des mailles envers ou inversement. J'ai beau tricoter les jetés torse au rang suivant, quand je regarde l'endroit de l'ouvrage, du côté gauche du motif en v renversé, il n'y a pas de trou mais du côté droit du motif, il y a des énormes trous. Ce n'est donc pas du tout symétrique et c'est affreux. Pouvez-vous m'aider ?

DROPS Design 25.09.2015 kl. 18:07:

Bonjour Nathalie, la vidéo ci-dessous montre comment tricoter un jeté torse au rang suivant (la 1ère fois en "normal" et la 2ème fois version "torse", essayez éventuellement le de faire moins lâche. Vous pouvez également tout à fait utiliser une autre méthode pour augmenter si vous préférez. Bon tricot!

ALLAIN Cindy 22.06.2015 - 18:33:

Bjr, je viens de finir le diagramme mais je n'ai qu'un seul "V" et non deux comme sur la photo du chausson, dois je quand même commencer le point mousse et les diminutions ? Ou faut il répéter deux fois le diagramme ? Merci d'avance, c'est la 1ère fois que j'utilise un diagramme, après avoir recommencer 4 fois je penses avoir compris, mais j'ai l'impression qu'il me manque une partie !! Cindy

DROPS Design 22.06.2015 kl. 18:43:

Bonjour Cindy, c'est exact, vous devez continuer en répétant le diagramme et en continuant les augmentations comme avant, en arrêtant 1 rang après la dernière augmentation, votre ouvrage doit mesurer 9-10-11 cm (cf taille), vous continuez ensuite au point mousse. Bon tricot!

Nadine S 04.03.2015 - 15:57:

J'ai réalisé de modèle en Alaska, facile, rapide et tellement joli !

Tracey 10.12.2014 - 20:57:

Hej! Enligt beskrivningen så ska man sticka 1m i rätst och 19 m i slätstickning och efter det göra ett omslag som på nästa varv stickas i bakre maskbågen. på både höger och vänster sida av 13 m i mitten på arbetet. Men jag får bara den fina vridna "sömmen" att luta från höger till vänster och inte från vänster till höger utan där hamnar det på baksidan (aviga sidan) Vad gör jag för fel? Tacksam för svar

DROPS Design 01.12.2015 kl. 11:41:

Hej Tracey, Jo om du gör begge omslagen från rätsidan, bör det hamna på rätsidan.... eller forstår jag inte vad du menar kanske?

Tatiana 08.12.2014 - 17:34:

And YO between 2 sts from the diagram, how it must be done from the WS? As knit or purl? If purl, so I do not have the last knit st.

DROPS Design 09.12.2014 kl. 08:58:

Dear Tatiana, the YO between 2 sts in diagram will be purled on next row (in front of loop to make hole), only YO's made for increase are worked into back of loop. Happy Knitting!

Tatiana 07.12.2014 - 21:12:

Could you please tell me, the 1st row, after 4 ridges in garter st, should be such: 1 st in garter st, 17-19-21 sts in stockinette st, YO , A.1 (= 13 sts), YO, 17-19-21 sts in stockinette st, 1 st in garter st. ? This is the RS, yes? And next row after this, WS, should be such: 1st knit, 17-19-21 sts purl, YO twisted, A.1 ( 3 sts knit, 7 sts purl, 3 sts knit), YO twisted, 17-19-21 sts purl, 1 st knit? And could I find video about YO twisted? Thank you in advance!

DROPS Design 08.12.2014 kl. 09:21:

Dear Tatiana, that's exactly how you will have to work - see below how to inc with a YO and work it twisted (into back of loop) on next row. Happy knitting!

Post a comment to pattern DROPS 147-19

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.