DROPS Karisma
DROPS Karisma
100% Wool
from 2.50 € /50g
Get the yarn to make this pattern from 35.00€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale
DROPS 143-12
DROPS design: Pattern no u-675
Yarn group B
--------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Materials:
DROPS KARISMA from Garnstudio
Colour no 52, dark mustard:
700-750-850-900-1000-1100 g

DROPS CROCHET HOOK SIZE 4.5 mm - or size needed to get 17 sts x 6 rows in pattern A.4 = 10 cm in width (1 repetition A.1 measures 3½ cm in width, 1 repetition A.2 measures 3 cm in width, 1 repetition A.3 measures 2½ cm in width, 1 repetition A.1/A.2/A.3 measures approx. 2½ cm vertically).

DROPS MOTHER-OF-PEARL BUTTONS, NO 522 (20 mm):
6 pieces for all sizes

-------------------------------------------------------

Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here

-------------------------------------------------------

DROPS Karisma
DROPS Karisma
100% Wool
from 2.50 € /50g
Get the yarn to make this pattern from 35.00€.

The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!

DROPS Super Sale

SAVE 30% on 6 cotton favourites!
Valid until 12.04.2024

Pattern instructions

DC ROW:
Beg every dc row with 1 ch (not counted as 1st dc), work 1 dc in every st the entire row, turn.

PATTERN A.1 (divisible by 6 + 1):
ROW 1 (= RS): Work 4 ch (= 1 dtr) in 1st dc, continue as follows – also see 1st row in diagram A.1: * 2 ch, 1 bobble with 5 dtr, 2 ch, 1 dtr in next dc *, repeat from *-* the entire row, turn piece.
ROW 2 (= WS): 1 ch, 3 dc in 1st ch-loop, 1 dc in next bobble, 2 dc in next ch-loop, continue as follows – also see 2nd row in diagram A.1: * 1 dc in next dtr, 2 dc in next ch-loop, 1 dc in next bobble, 2 dc in next ch-loop *, repeat from *-* the entire row, finish with 1 dc more in last ch-loop on row (= same no of dc as before).

PATTERN A.2 (divisible by 5 + 1):
ROW 1 (= RS): Work 4 ch (= 1 dtr) in 1st dc, continue as follows – also see 1st row in diagram A.2: * 2 ch, work 1 bobble with 4 dtr, 2 ch, 1 dtr in next dc *, repeat from *-* the entire row, turn.
ROW 2 (= WS): 1 ch, 3 dc in 1st ch-loop, skip 1st bobble, 2 dc in next ch-loop, continue as follows – also see 2nd row in diagram A.2: * 1 dc in next dtr, 2 dc in next ch-loop, skip next bobble, 2 dc in next ch-loop *, repeat from *-* the entire row, finish row with 1 dc more last ch-loop on row (= same no of dc as before).

PATTERN A.3 (divisible by 4 + 1):
ROW 1 (= RS): Work 4 ch (= 1 dtr) in 1st dc, continue as follows – also see 1st row in diagram A.3: * 1 ch, work 1 bobble with 3 dtr, 1 ch, 1 dtr in next dc *, repeat from *-* the entire row, turn.
ROW 2 (= WS): 1 ch, 2 dc in 1st ch-loop, 1 dc in next bobble, 1 dc in next ch-loop, continue as follows – also see 2nd row in diagram A.3: * 1 dc in next dtr, 1 dc in next ch-loop, 1 dc in next bobble, 1 dc in next ch-loop *, repeat from *-* the entire row, finish with 1 dc more in last ch-loop on row (= same no of dc as before).

INCREASE TIP:
Inc 1 st by working 2 sts in the same st.

TR ROW:
Work all tr rows from RS. Beg every tr row with 3 ch (= 1st tr), skip 1st dc from previous row, work 1 tr in every dc the entire row, turn.

PATTERN A.4:
ROW 1 (= RS): Work 1 tr row.
ROW 2 (= WS): Work 1 dc row.

DECREASE TIP - TR:
Crochet 2 tr tog as follows: Work 1 tr in dc below but wait with last pull through (= 2 sts on hook), work 1 tr in next dc but on last pull through, pull thread through all sts on hook = 1 tr dec.
Dec 3 tr at the beg or end of row by working the first 6 or last 6 tr tog 2 by 2.
Dec 2 tr at the beg or end of row by working the first 4 or last 4 tr tog 2 by 2.
Dec 1 tr at the beg or end of row by working the first 2 or last 2 tr tog.

DECREASE TIP - DC:
Insert hook in st below and pull thread through, insert hook in next st and pull thread through, make 1 YO and pull thread through all 3 loops on hook = 1 st dec.

WORK IN THE ROUND IN A CIRCLE:
After last dc on round do not finish with 1 sl st but continue on to next round with 1 dc in first dc on previous round.
--------------------------------------------------------

BODY:
Worked back and forth from mid front.
Work 188-200-218-242-266-290 LOOSE ch with Karisma on hook size 4.5 mm, turn and work 1 dc in 2nd ch from hook, then 1 dc in every ch the entire row = 187-199-217-241-265-289 dc, turn piece (1st row = WS). Work 4 DC ROWS - read explanation above = a total of 5 dc rows, piece measures approx. 2½ cm.
Then work PATTERN A.1 - read explanation above = 31-33-36-40-44-48 repetitions + 1 dtr. When 2ND ROW has been worked, there are 187-199-217-241-265-289 dc on row. REMEMBER THE CROCHET TENSION!
Work A.1 a total of 6-6-7-7-8-8 times vertically - but work last dc row from WS as follows: 1 ch, 3 dc in 1st ch-loop, skip 1st bobble, 2 dc in next ch-loop, * 1 dc in next dtr, 2 dc in next ch-loop, skip next bobble, 2 dc in next ch-loop *, repeat from *-* the entire row but finish with 3 dc in last ch-loop = 156-166-181-201-221-241 dc, turn.
Then work PATTERN A.2 - read explanation above. When 2ND ROW has been worked, there are 156-166-181-201-221-241 dc on row. Work A.2 a total of 6 times vertically - but work last dc row from WS as follows: 1 ch, 2 dc in 1st ch-loop, 1 dc in next bobble, 1 dc in next ch-loop, * 1 dc in next dtr, 1 dc in next ch-loop, 1 dc in next bobble, 1 dc in next ch-loop *, repeat from *-* the entire row, but finish with 2 dc in last ch-loop = 125-133-145-161-177-193 dc.
Then work PATTERN A.3 - read explanation above. When 2ND ROW has been worked, there are 125-133-145-161-177-193 dc on row. Work A.3 a total of 6 times vertically - but on last dc row from WS inc 10-12-14-16-18-20 dc evenly - READ INCREASE TIP = 135-145-159-177-195-213 dc, piece now measures approx. 48-48-50½-50½-53-53 cm.
Continue to work PATTERN A.4 1 time - read explanation above - AT THE SAME TIME on dc row from WS inc 9-11-13-11-13-15 sts evenly = 144-156-172-188-208-228 dc. Work A.4 a total of 6-7-7-8-8-9 times vertically (last row = dc row from WS), piece now measures approx. 58-60-62-63-66-68 cm.
Do not cut the thread. Insert 1 marker 36-39-43-47-52-57 dc in from each side on last dc row (= 72-78-86-94-104-114 dc between markers on back piece).

RIGHT FRONT PIECE:
= 36-39-43-47-52-57 dc. Continue with A.4 - AT THE SAME TIME dec for armholes on next row from RS as follows: Work tr until 3 dc remain before marker = 33-36-40-44-49-54 tr, turn (= skip 3 sts before marker) and work 1 dc row from WS.
READ ALL OF THE FOLLOWING 2 SECTIONS BEFORE CONTINUING.
Then dec for armhole at the end of every row from RS - READ DECREASE TIP - TR - as follows: Dec 3 tr 0-0-1-1-1-2 times, 2 tr 1-1-1-3-4-5 times, and 1 tr 1-3-3-2-3-1 time.
AT THE SAME TIME when A.4 has been worked a total of 5-6-6-6-6-6 times vertically (counted from marker in last dc row before armhole dec), dec for neck on next tr row from RS as follows: Cut the thread, work 3 ch (= 1 tr) in the 7th-7th-8th-8th-9th-9th dc from mid front (= skip 6-6-7-7-8-8 tr from mid front), work tr - AT THE SAME TIME continue armhole dec at the end of row if it is not done, turn and work 1 dc row from WS.
Then dec at beg of every row from RS as follows: Dec 2 tr 2 times and 1 tr 2 times. When all dec are done, 18-19-19-20-21-23 sts remain for shoulder.
Work A.4 a total of 11-12-13-13-14-14 times vertically (counted from marker in last dc row before armhole dec), piece measures approx. 76-80-84-86-89-91 cm (finish with 1 dc row), cut and fasten the thread.

LEFT FRONT PIECE:
= 36-39-43-47-52-57 dc. Continue with A.4 - AT THE SAME TIME dec for armholes on next row from RS as follows: Skip the first 3 dc from marker in the side, work 3 ch (= 1 tr) in next dc (= 4th dc from marker), work tr the entire row = 33-36-40-44-49-54 tr, turn and work 1 dc row from WS.
READ ALL OF THE FOLLOWING 2 SECTIONS BEFORE CONTINUING.
Then dec for armhole at beg of every row from RS as follows: Dec 3 tr 0-0-1-1-1-2 times, 2 tr 1-1-1-3-4-5 times, and 1 tr 1-3-3-2-3-1 time. AT THE SAME TIME when A.4 has been worked a total of 5-6-6-6-6-6 times vertically (counted from marker in last dc row before armhole dec), dec for neck on next tr row from RS as follows: Continue with armhole dec at beg of row if it is not done, work tr until 6-6-7-7-8-8 tr remain from mid front, turn and work 1 dc row from WS.
Then dec at end of every row from RS as follows: Dec 2 tr 2 times and 1 tr 2 times. When all dec are done, 18-19-19-20-21-23 sts remain for shoulder.
Work A.4 a total of 11-12-13-13-14-14 times vertically (counted from marker in last dc row before armhole dec), piece measures approx. 76-80-84-85-89-91 cm (finish with 1 dc row), cut and fasten the thread.

BACK PIECE:
= 72-78-86-94-104-114 dc. Continue with A.4 - AT THE SAME TIME dec for armholes on next row from RS as follows: Skip 3 dc from marker on right side of piece, work 3 ch in next dc (= 1st tr in 4th dc from marker), 1 tr in every dc until 3 dc remain from next marker = 66-72-80-88-98-108 tr, turn (= skip 3 dc in each side) and work 1 dc row from WS.
Then dec for armhole at beg and end of every row from RS as follows: Dec 3 tr 0-0-1-1-1-2 times, 2 tr 1-1-1-3-4-5 times, and 1 tr 1-3-3-2-3-1 time = 60-62-64-66-70-74 sts remain. Work A.4 a total of 9-10-11-11-12-12 times vertically (counted from marker in last dc row before armhole dec).

RIGHT SHOULDER:
From RS work 19-20-20-21-22-24 tr, turn and work 19-20-20-21-22-24 dc from WS, turn. On next row from RS, dec 1 tr at the end of row for neck = 18-19-19-20-21-23 tr remain for shoulder. Work 1 dc row from WS = a total of 11-12-13-13-14-14 repetitions A.4 vertically (counted from marker in last dc row before armhole dec), cut and fasten the thread, piece measures approx. 76-80-84-85-89-91 cm.

LEFT SHOULDER:
Now work from RS, beg from neck as follows: Count 19-20-20-21-22-24 sts in from left side and beg with 3 ch in this dc. Then work 1 tr in each of the 18-19-19-20-21-23 tr the entire row. (I.e. do not work over the middle 22-22-24-24-26-26 sts = neck.) Turn and work 1 dc in every tr, turn. On next row (= tr), dec 1 tr at the beg of row for neck = 18-19-19-20-21-23 tr. Work 1 row with dc, cut and fasten the thread, piece measures approx. 76-80-84-85-89-91 cm.

SLEEVE:
Worked back and forth.
Work 37-37-42-42-47-47 LOOSE ch with Karisma on hook size 4.5 mm, turn and work 1 dc in 2nd ch from hook, then 1 dc in every ch the entire row = 36-36-41-41-46-46 dc, turn (1st row = WS). Work 4 more dc rows = a total of 5 dc rows, piece measures approx. 2½ cm.
Then work PATTERN A.2 = 7-7-8-8-9-9 repetitions + 1 dtr. When 2ND ROW has been worked, there are 36-36-41-41-46-46 dc on row.
Work A.2 a total of 3 times vertically - but on last dc row from WS inc 0-4-2-4-6-8 dc evenly = 36-40-43-45-52-54 dc (piece now measures approx. 10 cm). Then work A.4 until finished measurements - AT THE SAME TIME inc 1 tr in the outermost dc in each side on 1st tr row - READ INCREASE TIP = 2 tr inc. Repeat inc in each side on every other tr row (i.e. every 4th row) 8-8-8-8-7-7 more times = 54-58-61-63-68-70 sts (= 9-9-9-9-8-8 times). Continue until A.4 has been worked a total of 21-21-20-20-19-19 times vertically (last row = dc row from WS), piece measures approx. 45-45-43½-43½-42-42 cm (shorter measurements in the larger sizes because of longer sleeve cap and broader shoulder width). Then dec for sleeve cap on next tr row from RS as follows: Sl sts until 4th dc, work 3 ch in same dc (= 1st tr), 1 tr in every dc until 3 dc remain on row = 48-52-55-57-62-64 tr, turn and work 1 dc row from WS. Continue dec for sleeve cap in each side on every row from RS as follows: Dec 3 tr 1-2-2-2-2-2 times, 2 tr 2-2-2-3-4-4 times, 1 tr 1-0-1-1-1-1 time, 2 tr 2-2-2-1-1-1 time. On next row from RS, dec 3 tr in each side of piece = 18-18-19-21-22-24 sts remain. On next row from WS, dec 3 dc in each side of piece - READ DECREASE TIP - DC = 12-12-13-15-16-18 dc remain, cut and fasten the thread. The piece now measures approx. 57 cm in all sizes.
Work another sleeve the same way.

ASSEMBLY:
Sew shoulder seams in front loop of outermost sts with little stitches. Sew in sleeves, sew sleeve seams tog.

COLLAR:
Work from RS approx. 80 - 100 dc along the entire neck edge (beg at the top of right front piece). Then work 1 dc row from WS while AT THE SAME TIME adjusting no of sts to 80-82-84-88-92-94 dc. Work 4 more dc rows = a total of 6 dc rows. On next row inc 3 dc evenly on row = 83-85-87-91-95-97 dc. Continue with dc rows until a total of 11 dc rows have been worked. On next dc row, inc 3-6-4-5-6-4 dc evenly = 86-91-91-96-101-101 dc. Then work A.2 (= 17-18-18-19-20-20 repetitions + 1 dtr) 1 time vertically. Work 2 more dc rows, cut and fasten the thread, collar measures approx. 9 cm.

BAND:
Work from RS approx. 130 - 150 dc along the entire edge mid front on right front piece (incl short side of collar). Then work 1 dc row from WS while AT THE SAME TIME adjusting no of sts to 128-134-138-140-144-148 dc. On next row from RS work as follows: Work dc until 80-84-84-84-88-90 dc remain on row, * 2 ch, skip 2 dc, work 13-14-16-17-17-18 dc *, repeat from *-* 1 more time, 2 ch, skip 2 dc, work 12 dc, 2 ch, skip 2 dc, work the last 2 dc on row = 4 buttonholes, turn. Then work 2 more dc rows (work 2 dc in every ch-loop), cut and fasten the thread = 5 dc rows in total.
Work band the same way mid front along left front piece but without buttonholes.
Sew on 4 buttons on to left band.

FLAP:
Worked in the round. Work 19 LOOSE ch with Karisma on hook size 4.5 mm, turn and work 3 dc in 2nd ch from hook, then 1 dc in every ch until 1 ch remains on row, work 3 dc in last ch, turn piece and continue to work 1 dc in every ch on the other side of ch row - READ WORK IN THE ROUND IN A CIRCLE!
On next round work 1 dc in every dc but in each short side inc 1 dc (by working 2 dc in same dc) in each of the middle 3 dc (= 3 inc sts in each short side). Continue in the round with inc in each short side the same way until flap measures approx. 14-14-15-15-16-16 cm in width, work 1 sl st in next dc, cut and fasten the thread.
Place flap in the middle of back piece where pattern A.3 goes over to A.4. Sew on 1 button on each side through both layers.


Diagram

symbols = 1 bobble with 5 dtr: Work 1 dtr in next dc - but wait with last pull through (= 2 sts on hook), work 1 dtr in each of the next 4 dc the same way, pull thread through all 6 sts on hook.
symbols = 1 bobble with 4 dtr: Work 1 dtr in next dc - but wait with last pull through (= 2 sts on hook), work 1 dtr in each of the next 3 dc the same way, pull thread through all 5 sts on hook.
symbols = 1 bobble with 3 dtr: Work 1 dtr in next dc - but wait with last pull through (= 2 sts on hook), work 1 dtr in each of the next 2 dc the same way, pull thread through all 4 sts on hook.
symbols = 1 dtr
symbols = 1 dc
symbols = 1 ch
symbols = 1ST ROW in patterns
symbols = 2ND ROW in patterns
diagram
Do you have a question? See a list of frequently asked questions (FAQ)

Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.

The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size is only meant as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.

The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a gauge tension swatch

The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.

The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.

Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.

See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?

All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.

Click here for an overview of the yarns in each yarn group

At the top of all our patterns you’ll find a link to our yarn calculator, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the calculator will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).

If the pattern is worked with multiple colours, every colour will have to be calculated separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.

Click here to see our yarn calculator

Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn calculator, or simply pick a yarn from the same yarn group.

It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.

The yarn calculator will provide both alternative yarn as well as required amount in the new quality.

If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.

You'll find the size chart at the bottom of the pattern.

See DROPS lesson: How to read size chart

The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.

Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.

See DROPS lesson: How to measure your tension/gauge

See DROPS video: How to make a tension/gauge swatch

Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.

The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.

When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.

When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.

See DROPS lesson: How to read knitting diagrams

The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.

When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.

When working in the round, every row in the diagram are worked from the right side, from right to left.

When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.

The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.

See DROPS lesson: How to read crochet diagrams

Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.

The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.

See DROPS lesson: How to read knitting diagrams

See DROPS lesson: How to read crochet diagrams

The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.

The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder closest to the neckline, and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.

On a jacket measures are never taken along bands, unless specifically stated. Always measure inside band stitches when measuring the length.

See DROPS lesson: How to read a schematic drawing

Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.

Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.

The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.

It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.

See DROPS video: How to bind off with yarn overs (yo)

To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.

See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately

Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.

See DROPS video: How to knit steeks and cut open

Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.

See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?

Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.

Make sure to follow instructions and diagrams for your size!

If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.

Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.

All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.

Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding

Below are some tips on how to get the best result when working with hairier yarns:

1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.

2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.

3. Leave in the freezer for a few hours before taking it out and shaking it again.

4. Wash the garment according to the instructions on the yarn label.

Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.

You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.

Still can't find the answer you need? Then scroll down and leave your question so one of our experts can try to help you. This will be done normally within 5 to 10 working days.
In the meantime, you can read the questions and answers that others have left to this pattern or join the DROPS Workshop on Facebook to get help from fellow knitters/crocheters!

You might also like...

Post a comment to pattern DROPS 143-12

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.

Comments / Questions (106)

country flag Marina Bieller wrote:

Buongiorno. Ho appena comprato 1.5 kg di filato Flora da lavorare con il n. 3 e vorrei realizzare il modello 143/12 che però è realizzato con il filato Karisma. da lavorare con il n. 4,5 Quale filo posso unire al Flora per avere lo spessore necessario a realizzare questo modello? Io ho il colore verde. Grazie

22.08.2023 - 17:00

DROPS Design answered:

Buonasera Marina, non ci sono dei filati che si abbinano a Flora per ottenere lo spessore del gruppo filati B. Per un'assistenza così personalizzata può rivolgersi al suo rivenditore DROPS di fiducia. Buon lavoro!

22.08.2023 - 22:27

country flag Sylvie Marsille Schérer wrote:

Bonjour, j'ai réalisé ce gilet en taille S pour ma fille. J'aimerais faire ce même gilet pour ma petite fille en taille 6 ou 7 ans. Auriez vous les explications ? Je vous remercie infiniment pour votre réponse.

11.05.2023 - 11:51

DROPS Design answered:

Bonjour Mme Marsille Schérer, ce modèle n'est malheureusement pas disponible en version enfant; retrouvez ici toutes les vestes ou tous les gilets ou boléros enfant au crochet; en espérant que l'un d'eux puisse vous inspirer. Bon crochet!

11.05.2023 - 16:37

country flag Evy Nilsson wrote:

Hej! Jag skulle vilja virka koftan, Jaqueline by DROPS Design i ett bomullsgarn. Vilket bomullsgarn rekommenderar ni? Evy

26.02.2023 - 20:23

DROPS Design answered:

Hej Evy, Prøv vores garnkalkulator. Vælg DROPS Karisma, vælg antal gram i din størrelse og vælg 1 tråd så får du garnåtgången frem i bla DROPS Muskat, DROPS Cotton Light, DROPS Cotton Merino :)

28.02.2023 - 14:47

country flag Lotta wrote:

Hej! Jag undrar om mouchen stängs med en lm och att jag sedan ska virka 2 lm och dubbelstolpen i A1? Alltså en mouch inkl 1 lm sen 2 lm 1 dstp 2 lm?

24.02.2023 - 16:23

DROPS Design answered:

Hei Lotta. Se vårt svar tidligere idag. mvh DROPS Design

28.02.2023 - 20:18

country flag Lotta wrote:

Hej! Jag undrar om mouchen stängs med en lm och att jag sedan ska virka 2 lm och dubbelstolpen i A1? Alltså en mouch inkl 1 lm sen 2 lm 1 dstp 2 lm?

22.02.2023 - 11:25

DROPS Design answered:

Hei Lotta. Nei, du hekler slik det står i diagrambeskrivelsen for dette ikonet, deretter hekler du 2 luftmasker og 1 dobbeltstav. mvh DROPS Design

28.02.2023 - 19:40

country flag Delyen De La Cruz Velita wrote:

Buenas tardes, me gustaría saber cuántas vuelta hago con los cinco puntos altos en la misma, delos cuatro pa en la misma cadena y de los 3 pa en la misma, etc del abrigo color mostaza se le gradecer eternamente gracias x por su atención.

15.08.2021 - 23:41

DROPS Design answered:

Hola Delyen, el tamaño de las motas (A.1, A.2, A.3) depende de la talla. El número de repeticiones en la fila y el número de filas depende de la talla, por lo que sin saber la talla no podemos concretarlo. Por ejemplo, A.1 (la mota de 5 pa) para la talla S se repite 5 veces en vertical., e.t.c.

16.08.2021 - 18:43

country flag Delyen wrote:

Hola buenas tardes me gustaría que nos brinde en video el tutorial ya que me es difícil entender soy principiante, del abro color moztasa

15.08.2021 - 23:37

DROPS Design answered:

Hola Delyen, no hacemos vídeos personalizados, pero puedes encontrar bajo el patrón aquellos vídeos que puedan servirte de ayuda para realizar la labor.

16.08.2021 - 18:37

country flag Soco Martinez wrote:

Hola buenas noches soy nueva y todavia no entiendo muy bien los patrones me gustaria mas un tutorial, esta precioso el sueter mostaza o especificar un poco mas como se hacen los puntos del saco parte alta y baja y son piezas separadas gracias

08.02.2021 - 01:45

DROPS Design answered:

Hola Soco! La chaqueta se trabaja de abajo hacia arriba empezando por el CUERPO hasta las sisas, luego trabajará diferentes piezas por separado. Luego, las mangas se trabajarán y coserán. Terminar con cuello, bandas y solapa. Buen trabajo!

11.02.2021 - 08:08

country flag Anika wrote:

Hello! I'm working on this pattern and I have two questions about the right front instructions. 1. When it says to decrease 3dc 0 times, does that mean I work one row of dc with a decrease? 2. For the neck shaping, it says to chain 3 in the 7th sc from center front, but it's not clear to me what center front is referring to. Thank you!

25.01.2021 - 22:46

DROPS Design answered:

Hi Anika, When it says increase x 0, it means that in your size you do not need to increase. The centre front is the edge of the front piece, so the 7th sc from the centre front is the 7th sc from the band-edge. Happy crocheting!

26.01.2021 - 07:33

country flag Klaartje wrote:

Ik zie in de opmerkingen en vragen dat er wordt verwezen naar het telpatroon. Waar kan ik dat vinden?

24.10.2020 - 14:37

DROPS Design answered:

Dag Klaartje,

Het telpatroon staat helemaal onderaan de beschrijving en dan onder de matentekening (beetje verstopt onder de mouw :))

25.10.2020 - 19:09