DROPS / 143 / 40

Magic by DROPS Design

Crochet DROPS moebius neck warmer and hat with squares in ”Delight”.

DROPS design: Pattern no de-092
Yarn group A
--------------------------------------------------------
NECK WARMER:
Size: One-size
Circumference: approx. 150 cm / 59''
Length: approx. 36 cm / 14 1/4''

Materials: DROPS DELIGHT from Garnstudio
300 g color no 10, olive/rust/plum

DROPS CROCHET HOOK size 3.5 mm/E/4 - or size needed to get 20 dc = 10 cm / 4'' in width (1 square measures approx. 6 x 6 cm / 2 3/8'' x 2 3/8").
------------------------------------------------------

HAT:
Size: S/M - L/XL
To fit head circumference: approx. 54/56 - 58/60 cm / 21 1/4"/22" - 22 3/4"/23½"
Circumference: 48-54 cm / 19"-21 1/4"
Height: 24-25 cm / 9½"-9 3/4"

Materials: DROPS DELIGHT from Garnstudio
100 g color no 10, olive/rust/plum for both sizes

DROPS CROCHET HOOK size 3.5 mm/E/4 - or size needed to get 20 dc = 10 cm / 4'' in width (1 square measures approx. 6 x 6 cm / 2 3/8'' x 2 3/8'').

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 5 ft 7 in and uses size S or M. If you are making a sweater, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (153)

75% Wool, 25% Polyamide
from 2.30 $ /50g
DROPS Delight print DROPS Delight print 2.30 $ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 18.40$. Read more.

Pattern instructions

NOTE: This pattern is written in American English. All measurements in charts are in cm. For conversion from inches to cm - click here. There are different terms for crocheting in American and British English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in British English, please click here.
NECK WARMER:

ROUNDS WITH DC:
Beg every round with dc with 3 ch (= 1st dc), finish round with 1 sl st in 3rd ch from beg of round.

COLOR CHANGE:
To get a nice color change work last sl st on round with the new thread. Continue on to next round with the new thread.
--------------------------------------------------------

SQUARE:
Ch 6 with Delight on hook size 3.5 mmE/4 and form a ring with 1 sl st in 1st ch. Read ROUNDS WITH DC.
ROUND 1: * Work 3 dc in ch-ring, 3 ch *, repeat from *-* a total of 4 times = 12 dc and 4 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball (= new color each round) - READ COLOR CHANGE.
ROUND 2: In every ch-space work as follows: 3 dc, 3 ch and 3 dc, 1 ch = 24 dc and 8 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball.
ROUND 3: * In next ch-space work as follows: 3 dc, 3 ch and 3 dc (= corner), ch 1, in next ch-space work 3 dc, 1 ch *, repeat from *-* the entire round = 36 dc and 12 ch-spaces. Cut and fasten the thread.
Work a total of 25 squares. Work squares tog into 1 strip as follows: Place 2 and 2 squares on top of each other, insert hook through ch-space in the corner on both squares, work 1 ch and 1 sc, * ch 3, 1 sc in next ch-space on both squares *, repeat from *-*, cut and fasten the thread. Work the ends of the strip tog the same way to form a ring – NOTE: twist the strip 1 time to form a twisted ring, before working the ends tog.

NECK WARMER:
Worked from middle of piece = the twisted ring and out towards the outer edges - i.e. work upwards and downwards at the same time. NOTE! Beg every round with 3 ch (= 1st dc).
Work 1st round along the strip as follows: In each of the 4 ch-spaces on every square work 3 dc and ch 1, finish round with 1 sl st in 3rd ch from beg of round (= 1st dc), sl st until next ch-space. Continue to work as follows: In every ch-space work 3 dc, ch 1, finish round with 1 sl st in 3rd ch from beg of round (= 1st dc), sl st until next ch-space. Continue like this until neck warmer measures approx. 36 cm / 14 1/4'' vertically (the entire piece, not just from the middle and outwards). Cut and fasten the thread.

--------------------------------------------------------

HAT:

ROUNDS WITH DC:
Beg every round with dc with 3 ch (= 1st dc), finish round with 1 sl st in 3rd ch from beg of round.

DECREASE TIP 1:
Dec 1 dc by working the next 2 dc tog as follows: Work 1 dc but wait with last pull through (= 2 sts on hook), work next dc but on last pull through, pull thread through all 3 sts on hook.

ROUNDS WITH SC:
Beg every round with sc with 1 ch (not counted as 1st sc) - NOTE! Work sc in back loop of every sc, finish with 1 sl st in 1st sc.

DECREASE TIP 2:
Dec 1 sc by working 2 sc tog as follows: * Insert hook in back loop of next sc, get thread *, repeat from *-* one more time, make 1 YO and pull thread through all 3 sts on hook.

COLOR CHANGE:
To get a nice color change work last sl st on round with the new thread. Continue on to next round with the new thread.
--------------------------------------------------------

SQUARE:
Ch 6 with Delight on hook size 3.5 mm/E/4 and form a ring with 1 sl st in 1st ch. Read ROUNDS WITH DC.
ROUND 1: * Work 3 dc in ch-ring, 3 ch *, repeat from *-* a total of 4 times = 12 dc and 4 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball (= new color each round) - READ COLOR CHANGE.
ROUND 2: In every ch-space work as follows: 3 dc, 3 ch and 3 dc, 1 ch = 24 dc and 8 ch-spaces. Sl sts until next ch-space, cut the thread and switch to another color of the same ball.
ROUND 3: * In next ch-space work as follows: 3 dc, 3 ch and 3 dc (= corner), ch 1, in next ch-space work 3 dc, 1 ch *, repeat from *-* the entire round = 36 dc and 12 ch-spaces. Cut and fasten the thread.
Work a total of 8-9 squares. Work squares tog into 1 strip as follows: Place 2 and 2 squares on top of each other, insert hook through ch-space in the corner on both squares, work 1 ch and 1 sc, * ch 3, 1 sc in next ch-space on both squares *, repeat from *-*, cut and fasten the thread. Work the ends of the strip tog the same way to form a ring.

HAT:
Worked in the round. Work along one side of strip as follows: In each of the 4 ch-spaces on every square work 3 dc, finish with 1 sl st in 3rd ch (= 1st dc) from beg of round = 96-108 dc. Then work ROUNDS WITH DC - read explanation above - as follows: 3 ch (= 1st dc), skip 1st dc from previous round, 1 dc in every dc, finish round with 1 sl st in 3rd ch from beg of round. Continue until hat measures approx. 16 cm / 6 1/4'' from bottom edge. Then dec as follows:
ROUND 1: * 1 dc in each of the next 6-7 dc, dec 1 dc - READ DECREASE TIP 1 *, repeat from *-* the entire round = 84-96 dc (= 12 sts dec).
ROUND 2: * 1 dc in each of the next 5-6 dc, dec 1 dc *, repeat from *-* the entire round = 72-84 dc.
ROUND 3: * 1 dc in each of the next 4-5 dc, dec 1 dc *, repeat from *-* the entire round = 60-72 dc.
ROUND 4: * 1 dc in each of the next 3-4 dc, dec 1 dc *, repeat from *-* the entire round = 48-60 dc.
ROUND 5: * 1 dc in each of the next 2-3 dc, dec 1 dc *, repeat from *-* the entire round = 36-48 dc.
ROUND 6: * 1 dc in each of the next 1-2 dc, dec 1 dc *, repeat from *-* the entire round = 24-36 dc.
SIZE S/M: Work all dc on round tog 2 by 2 = 12 dc, cut the thread and sew the last dc tog with thread end.
SIZE L/XL:
ROUND 7: * 1 dc in next dc, dec 1 dc *, repeat from *-* the entire round = 24 dc.
ROUND 8: Work all dc on round tog 2 by 2 = 12 dc, cut the thread and sew the last dc tog with thread end.

EDGE:
Work an edge along bottom edge of hat (along the other side of strip with squares) as follows: Work ch 1, in each of the 4 ch-spaces on every square work 4 sc = 128-144 sc, finish with 1 sl st in 1st sc from beg of round. Then work ROUNDS WITH SC - read explanation above. When edge measures approx. 1 cm / ½", dec 16-20 sc evenly on round - READ DECREASE TIP 2 = 112-124 sc. Continue until edge measures approx. 2 cm / 3/4'', cut and fasten the thread. The hat measures approx. 24-25 cm / 9½"-9 3/4'' vertically.


----------------------------------------------------------
Wrist warmers – see design: 143-41
----------------------------------------------------------


Comments (153)

Leave your comment!

Paola 27.12.2017 - 01:16:

La sciarpa che si vede in un'altra foto non è ad anello, ma diritta. Va lavorare sui due lati della striscia a quadri in giro di andata e ritorno oppure taglia do il filo alla fine di ogni giro?Grazie

DROPS Design 30.12.2017 kl. 21:52:

Buonasera Paola. Se capiamo correttamente la domanda, se vuole lavorare la sciarpa diritta, può lavorare sui due lati della striscia in righe di andata e ritorno. Buon lavoro!

Daniela 30.11.2017 - 13:02:

Grazie mille|

Daniela 30.11.2017 - 11:58:

Buongiorno, sto per iniziare questo lavoro, ma lo scaldacollo devo cucirlo per forza ad 8 o posso farlo rotondo normale e poi lo attorciglio io quando lo indosso? Grazie

DROPS Design 30.11.2017 kl. 12:50:

Buongiorno Daniela. Può formare un tondo normale, se preferisce. Cambia solo la seconda parte del lavoro. Senza chiudere ad “otto”, lavorerà prima il bordo lungo uno dei lati dei quadrati, poi il bordo lungo l’altro lato dei quadrati. Buon lavoro!

Elisangela Lima 01.10.2017 - 00:39:

Bom dia! Gostaria de encomendar uma touca desse modelo para entrega no Brasil, ha possibilidade?

DROPS Design 12.10.2017 kl. 13:40:

Não fazemos encomendas. Pode, no entanto, pedir a uma tricoteira que faça o modelo. Bom tricô

Vivian 21.08.2016 - 20:07:

Ik ben bezich met de halswarmer. Ik ben nu bezich met de tweede toer ( heb de rij met vierkantjes al gedaan). Moet ik dan het werk draaien en de eerste halve vaste vervangen voor drie lossen.

DROPS Design 24.08.2016 kl. 12:36:

Hoi Vivian. Ja, je moet de draai maken en elke toer beginnen met 3 l (= stk)

Susanna Di Pascale 03.05.2016 - 15:16:

Scusate, ma il colore n.ro 10 sembra essere composto da tre gomitoli di colore verde, ruggine e prugna. Quindi per fare il collo cosa devo ordinare? Grazie

DROPS Design 03.05.2016 kl. 15:19:

Buongiorno Susanna. Il filato Delight è un filato multicolore, quindi ogni gomitolo presenta sfumature di più colori, in questo caso dei colori oliva, ruggine e prugna. Il colore da ordinare è il numero 10. Buon lavoro!

Roseann Allen 07.12.2015 - 16:29:

I made all the squares and they measured the correct gauge. However when I connected them and crocheted around them the yarn stretched a lot and my scarf is now almost double the width.

Stefania 04.11.2015 - 10:53:

Il modello sembra essere eseguito con lane no melangelate ma con gomitoli di diverso colore ,mi sbaglio? grazie

DROPS Design 04.11.2015 kl. 20:39:

Buongiorno Stefania, questo modello è realizzato tutto con Delight colore n° 10, sono le sfumature del gomitolo che danno quest'effetto. Buon lavoro!

Fiquemont 31.10.2015 - 17:36:

Bonjour c super votre site mais je ne trouve pas les explication mitaines aux crochet ! merci !je vait regarder encore ! a bientot

DROPS Design 02.11.2015 kl. 10:21:

Bonjour Mme Fiquemont, vous trouverez les explications des mitaines en cliquant ici. (voir aussi onglet "À voir aussi", à droite de la photo. Bon crochet!

Katia 26.01.2015 - 09:45:

Buongiorno, sto lavorando lo scaldacollo, con colori diversi ma la resa è comunque molto bella, e se possibile chiederei un suggerimento per chiudere diversamente il lavoro; vorrei inserire una specie di "bordo" perché ho l'impressione che così come si presenta il lavoro ai bordi (3ma + 1cat) rischia di lasciarsi un po' andare ... qualche idea? Grazie mille

DROPS Design 26.01.2015 kl. 22:16:

Buonasera Katia. Potrebbe provare a lavorare gli ultimi giri con un uncinetto più piccolo in modo che questi giri risultino più sostenuti. Può anche decidere di aggiungere un eventuale bordo in un secondo momento, vedendo come si comporta il capo dopo averlo indossato alcune volte. Buon lavoro!

Post a comment to pattern DROPS 143-40

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process.

Your email address will not be published. Required fields are marked *.