DROPS / 138 / 2

Prudence by DROPS Design

Knitted DROPS tunic in garter st and with lace pattern, worked top down in ”Muskat”. Size: S - XXXL.

Tags: lace, top down, tops,

DROPS design: Pattern no R-606
--------------------------------------------------------
Size: S - M - L - XL - XXL - XXXL
Measurements on chart might appear small but the garment will be very elastic so knit it in the size you normally use.

Materials: DROPS MUSKAT from Garnstudio
350-400-450-500-550-600 g colour no 06, light pink.

DROPS CIRCULAR NEEDLE (80 cm) SIZE 3 mm - or size needed to get 22 sts x 44 rows in garter st = 10 x 10 cm.
DROPS CIRCULAR NEEDLE (80 cm) SIZE 3.5 mm - or size needed to get 22 sts x 30 rows in stocking st = 10 x 10 m.

Have you knitted/crocheted this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them!

Want to use a different yarn? Try our yarn converter!
Not sure which size you should choose? Then it might help you to know that the model in the picture is approx. 170 cm and uses size S or M. If you are making a jumper, cardigan, dress or similar garment, you will find a graphic with the measurements of the finished garment (in cm) at the bottom of the pattern.
Comments (60)

100% Cotton
from 1.60 £ /50g
DROPS Muskat uni colour DROPS Muskat uni colour 1.60 £ /50g
Wool Warehouse Direct Ltd
Order
DROPS Needles & Hooks
You can get the yarn to make this pattern from 11.20£. Read more.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches - click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for "crochet terms" here. For this pattern in American English, please click here.
GARTER ST (in the round on circular needle):
* K 1 round and P 1 round *, repeat from *-*.

PATTERN:
See diagram M.1 – the diagram shows 1 repetition of the pattern.

DECREASE TIP (applies to side dec):
Dec as follows when 2 sts remain before marker: K 2 tog.
Dec as follows after marker: K 2 twisted tog (i.e. work in back loop of st instead of front).

INCREASE TIP (applies to side inc):
Work until 1 st remains before marker, make 1 YO, work 2 sts and make 1 YO. On next round K YOs twisted to avoid holes (i.e. work in back loop of st instead of front). Work inc sts in stocking st until they can be worked in one whole repetition of diagram M.1.
--------------------------------------------------------

TUNIC:
Worked in the round, top down.
The garment is the same depth around the neck both on back and front piece.

Cast on 150-162-168-180-194-198 sts on circular needle size 3 mm with Muskat. Insert 4 markers in the corner sts as follows: 1st marker in the 40th-44th-45th-49th-54th-54th st, 2nd marker in the 75th-81st-84th-90th-97th-99th st, 3rd marker in the 115th-125th-129th-139th-151st-153rd st and 4th marker in the last st, (sts between 1st and 2nd marker (34-36-38-40-42-44 sts) = front piece, sts between 3rd and 4th marker (34-36-38-40-42-44 sts) = back piece and sts between 2nd and 3rd marker and between 4th and 1st marker (39-43-44-48-53-53 sts) = straps).
READ ALL OF THE FOLLOWING SECTION BEFORE CONTINUING!
Work in GARTER ST in the round - see explanation above (NOTE: 1st round = P) - AT THE SAME TIME on 1st round, inc 1 st by making 1 YO on each side of the 4 sts with markers (= 8 inc) – NOTE: Round beg by making 1 YO which will be the inc on one side of the last marker, the other YO at this marker is made at the end of round when only 1 st remains (= corner st with marker). This is done to make the transitions between rounds in the middle of a corner. On next round K YOs twisted (i.e. work in back loop of st instead of front) to avoid holes. Repeat inc every other round a total of 18-18-20-20-20-22 times = 294-306-328-340-354-374 sts. K 1 round after last inc.
REMEMBER THE KNITTING TENSION!
Work next round as follows: LOOSELY cast off the first 75-79-84-88-93-97 sts for strap - cast off with P, P the next 72-74-80-82-84-90 sts (= front piece, the first of these sts is already on the right needle), LOOSELY cast off the next 75-79-84-88-93-97 sts for strap - cast off with P and P the last 72-74-80-82-84-90 sts (= back piece, the first of these sts is already on the right needle). Work next round as follows: Cast on 14-20-24-30-38-44 new sts (= under sleeve, insert a marker in the middle of these), K 72-74-80-82-84-90 sts, cast on 14-20-24-30-38-44 new sts (= under the other sleeve, insert a marker in the middle of these) and K 72-74-80-82-84-90 sts = 172-188-208-224-244-268 sts. Remove the 4 corner markers.
NOW MEASURE PIECE FROM HERE! K until first marker (i.e. 7-10-12-15-19-22 sts) – now round beg here. Continue in garter st in the round – AT THE SAME TIME when piece measures 4 cm, dec 1 st on each side of markers in the sides - READ DECREASE TIP! Repeat dec when piece measures 8 cm = 164-180-200-216-236-260 sts.
When piece measures 11 cm, switch to circular needle size 3.5 mm. Continue to work as follows: 1-0-0-4-4-0 sts in stocking st, diagram M.1 over 80-90-100-100-110-130 sts, 2-0-0-8-8-0 sts in stocking st, diagram M.1 over 80-90-100-100-110-130 sts and 1-0-0-4-4-0 sts in stocking st. When piece measures 14 cm (from armhole incl rounds in garter st), inc 1 st on each side of markers in each side - READ INCREASE TIP! Repeat inc every 2½ cm a total of 14 times = 220-236-256-272-292-316 sts. When piece measures approx. 51-52-53-54-55-56 cm from armhole - adjust after 1 whole repetition of diagram M.1 – switch to circular needle size 3 mm. Work in garter st in the round for 2 cm, then LOOSELY cast off; use circular needle 3.5 mm for cast off - it is very important that the cast off edge is not too tight.

Diagram

= K
= K 2 tog, 1 YO
= 1 YO, slip 1 st as if to K, K 1, psso

Giovanna 02.04.2019 - 14:23:

È possibile avere le spiegazioni per lavorare con i ferri normali? Grazie

DROPS Design 02.04.2019 kl. 15:07:

Buogiorno Giovanna. Purtroppo in questa sede non riusciamo a darle un aiuto così personalizzato. In questa pagina trova qualche indicazione su come adattare ai ferri dritti un modello pensato per essere lavorato in tondo. Per un’assistenza migliore, può rivolgersi, anche via mail, al suo rivenditore Drops di fiducia. Buon lavoro!

Ann De Clerck 01.03.2019 - 15:36:

Na de opzet van de steken moet er aan de 4 markeerders aan beide kanten gemeerderd worden met een omslag! meerderen om de nld? Is dit dan dat je in elke naald, zowel in de rechtste als de averrechtse nld moet meerderen, of wordt er enkel in de averrechtse nld gemeerderd?

DROPS Design 05.03.2019 kl. 20:52:

Dag Ann,

Je meerdert elke keer aan beide kanten van alle markeerdraden en je doet dit om de naald, dus de ene naald wel en de andere naald niet. Je meerdert dus steeds in een naald met recht en je breit de omslagen gedraaid in een naald met averecht.

Shavensheep 15.08.2018 - 21:32:

Hallo, ich habe das Top gestickt und würde es gerne mit einer kurzen Jacke ergänzen um es auch im Herbst noch tragen zu können. Haben Sie einen Vorschlag für eine passende Anleitung? Danke und Gruß!

DROPS Design 16.08.2018 kl. 09:32:

Liebe Frau Shavensheep, hier finden Sie eine große Auswahl von gestrickten Jacken von oben nach unten gestrickt. Viel Spaß beim stricken!

Regina Hapka 29.07.2018 - 21:34:

Zum Anfang habe ich zwischen den Makierungen gerade-ungerade-gerade- ungerade Maschenanzahl. Beim ersten Abnehmen soll ich aber plötzlich ungerade abnehmen, gerade stricken, ungerade abnehmen und gerade Maschenzahl stricken. Dann stimmt es doch nicht mehr mit der Raglanschräge überein. Was soll ich machen? Ich stricke die größte Größe.

DROPS Design 31.07.2018 kl. 09:23:

Liebe Frau Hapka, bei der Raglan nehmen Sie immer 1 Masche auf beiden Seiten jeder Markierung zu, dh 8 M werden pro Zunahmenrunde zugenommen. Die Markierung bleibt immer an der gleichen Stelle und die Zunahmmen sind immer vor der Maschen mit der Markierung und nach der Maschen mit der Markierung gestrickt (es wird immer 2 M mehr zwischen jeder Markierung sein). Viel Spaß beim stricken!

Susanne 24.07.2018 - 10:44:

Ich komme bald beim Musterabschnitt an und frage mich, wie die Zunahmen in das Muster eingearbeitet werden sollen. Bleibt dann auf der Seite ein immer breiter werdender Streifen aus glatt gestrickten Maschen und es gibt immer die gleiche Anzahl M1 pro Reihe, bis zum Ende der Arbeit? Das würde in meinem Fall (S) bedeuten ich hätte am Schluss auf jeder Seite 32 glatte Maschen... vielen Dank!

DROPS Design 24.07.2018 kl. 14:37:

Liebe Susanne, die Aufnahmen auf den Seiten werden im Muster eingestrickt, sobald Sie genügend Maschen für 1 Rapport M.1 haben - siehe TIPP ZUM AUFNEHMEN. viel Spaß beim stricken!

Annab 28.05.2017 - 16:02:

E' possibile realizzare il modello con safran? Grazie per la risposta e complimenti per il sito.

DROPS Design 28.05.2017 kl. 18:48:

Buongiorno Annab. Muskat appartiene al gruppo filati B, mentre Safran appartiene al gruppo filati A quindi più sottile. Dovrebbe ricalcolare il numero delle maglie per la sua taglia in base al campione che ottiene lavorando con Safran. Buon lavoro!

A.M.C. Claessens 26.09.2016 - 21:13:

Heb hem af maar is veel te diep onder de armen. BH is volledig in zicht. Ik ga de top niet uithalen. Eens denken over een gehaakt inzet stukje...

Tiziana Albanesi 05.04.2016 - 19:23:

Ciao e complimenti per il sito bellissimo! La mia domanda riguarda l'inizio delle istruzioni dove si indica "lavorare a punto legaccio in tondo....(attenzione: 1 giro rovescio)" . Devo lavorare i punti del primo ferro a rovescio o devo intendere che mi trovo sul rovescio del lavoro? Quindi, se è vero il primo caso, devo fare tutti gli aumenti (gettati) durante un ferro che lavoro a punti a rovescio? Grazie dell'attenzione che vorrete dedicarmi

DROPS Design 05.04.2016 kl. 20:04:

Buonasera Tiziana. Nel corso del primo giro le m vengono lavorate a rov. Gli aumenti avvengono sui giri lavorati a rov e le m gettate verranno lavorate a dir ritorto al giro successivo. Buon lavoro!

Susanne 01.04.2016 - 04:05:

Kan denne tunika også strikkes i Belle?

DROPS Design 01.04.2016 kl. 10:07:

Hej Susanne. Ja, du kan (Belle er samme kategori som Muskat - se garnalternativer), men husk at strikke en pröve saa din strikkefasthed er korrekt. God fornöjelse!

Sanny 29.06.2014 - 16:44:

Me gustaría tejer este jersey con do aguja. Podrían enviarme las instrucciones por favor?

DROPS Design 01.07.2014 kl. 13:00:

Hola Sanny. El patrón está traducido al español. Mira el apartado seleccionar idioma bajo la foto.

Post a comment to pattern DROPS 138-2

We would love to hear what you have to say about this pattern!

If you want to leave a question, please make sure you select the correct category in the form below, to speed up the answering process. Required fields are marked *.